D45C12 (PNP), D44C12 (NPN) Complementary Silicon Power Transistor The D45C12 and D44C12 are for general purpose driver or medium power output stages in CW or switching applications. Features * * * * http://onsemi.com 4.0 AMPERE COMPLEMENTARY SILICON POWER TRANSISTORS 80 VOLTS Low Collector-Emitter Saturation Voltage - 0.5 V (Max) High ft for Good Frequency Response Low Leakage Current Pb-Free Packages are Available* IIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIII IIIIIIIIIIII IIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIII III IIIII II IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIII IIIIIIIIIIII IIIIIIIIII IIIIIIIIIIII III IIIII II IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII 4 MAXIMUM RATINGS Rating Symbol Value Unit Collector-Emitter Voltage VCEO 80 Vdc Collector-Emitter Voltage VCES 90 Vdc Emitter Base Voltage VEB 5.0 Vdc Collector Current - Continuous Peak (Note 1) IC 4.0 6.0 Adc Total Power Dissipation @ TC = 25C Total Power Dissipation @ TA = 25C PD 30 1.67 W W/C TJ, Tstg -55 to 150 C Operating and Storage Junction Temperature Range TO-220AB CASE 221A STYLE 1 1 2 3 MARKING DIAGRAM & PIN ASSIGNMENT 4 Collector Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction-to-Case Thermal Resistance, Junction-to-Ambient Maximum Lead Temperature for Soldering Purposes: 1/8 in from Case for 5 Sec Symbol Max Unit RqJC 4.2 C/W RqJA 75 C/W TL 275 C 1. Pulse Width v 6.0 ms, Duty Cycle v 50%. D4xC12G AYWW 1 Base 3 Emitter 2 Collector x A Y WW G = 4 or 5 = Assembly Location = Year = Work Week = Pb-Free Package ORDERING INFORMATION *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. (c) Semiconductor Components Industries, LLC, 2011 October, 2011 - Rev. 3 1 See detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. Publication Order Number: D45C12/D D45C12 (PNP), D44C12 (NPN) IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIII III III III III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise noted) Characteristic Symbol DC Current Gain (VCE = 1.0 Vdc, IC = 0.2 Adc) (VCE = 1.0 Vdc, IC = 1.0 Adc) (VCE = 1.0 Vdc, IC = 2.0 Adc) Min Max 40 20 20 120 - - Unit hFE - ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted) Characteristic Symbol Min Typ Max Unit Collector Cutoff Current (VCE = Rated VCES, VBE = 0) ICES - - 0.1 mA Emitter Cutoff Current (VEB = 5.0 Vdc) IEBO - - 10 mA Collector-Emitter Saturation Voltage (IC = 1.0 Adc, IB = 50 mAdc) VCE(sat) - 0.135 0.5 Vdc Base-Emitter Saturation Voltage (IC = 1.0 Adc, IB = 100 mAdc) VBE(sat) - 0.85 1.3 Vdc Ccb - 125 - pF fT - 40 - MHz td + tr - 50 75 ns Storage Time (IC = 1.0 Adc, IB1 = IB2 = 0.1 Adc) ts - 350 550 ns Fall Time (IC = 1.0 Adc, IB1 = IB2 = 0.1 Adc) tf - 50 75 ns OFF CHARACTERISTICS ON CHARACTERISTICS DYNAMIC CHARACTERISTICS Collector Capacitance (VCB = 10 Vdc, f = 1.0 MHz) Gain Bandwidth Product (IC = 20 mA, VCE = 4.0 Vdc, f = 20 MHz) SWITCHING TIMES Delay and Rise Times (IC = 1.0 Adc, IB1 = 0.1 Adc) ORDERING INFORMATION Device Shipping Package D45C12 TO-220AB D45C12G TO-220AB (Pb-Free) D44C12 TO-220AB D44C12G TO-220AB (Pb-Free) 50 Units / Rail For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. 200 IC, COLLECTOR CURRENT (AMPS) hFE, DC CURRENT GAIN VCE = 1.0 Vdc TJ = 25C 100 90 80 70 60 50 40 30 20 0.04 0.07 0.1 0.2 0.3 0.4 0.7 1.0 IC, COLLECTOR CURRENT (AMPS) 2.0 10 5.0 3.0 2.0 0.1 ms dc 1.0 0.5 0.3 0.2 0.1 1.0 ms TC 70C DUTY CYCLE 50% 0.05 0.03 0.02 0.01 1.0 3.0 4.0 1.0 ms 10 ms Figure 1. Typical DC Current Gain 50 5.0 7.0 10 20 30 2.0 3.0 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) 70 100 Figure 2. Maximum Rated Forward Bias Safe Operating Area http://onsemi.com 2 D45C12 (PNP), D44C12 (NPN) PACKAGE DIMENSIONS TO-220 CASE 221A-09 ISSUE AG -T- B F SEATING PLANE C T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q U 1 2 3 H K Z L R V J NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. G D N INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.036 0.142 0.161 0.095 0.105 0.110 0.161 0.014 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 STYLE 1: PIN 1. 2. 3. 4. MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.91 3.61 4.09 2.42 2.66 2.80 4.10 0.36 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04 BASE COLLECTOR EMITTER COLLECTOR ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 3 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative D45C12/D