X315
301 WEST O STREET • OGALLALA, NE 69153
Phone: (308) 284-3611 e-mail: sales@ascapacitor.com
Fax: (308) 284-8324 web: www.ascapacitor.com
GENERAL SPECIFICATIONS
PHYSICAL CHARACTERISTICS
CONSTRUCTION: NON-INDUCTIVE WOUND METALLIZED POLYPROPYLENE FILM AND FOIL HYBRID.
CASE: FLAME RETARDANT EPOXY DIPPED.
LEAD MATERIAL: SOLDER COATED OR TINNED SOLID WIRE. AWG AS SPECIFIED IN TABLES.
DIMENSIONS: AS SPECIFIED IN TABLES. OTHER LEAD LENGTHS, LEAD SPACINGS, AND CRIMP
STYLES AVAILABLE UPON REQUEST.
ELECTRICAL CHARACTERISTICS
CAPACITANCE: AS SPECIFIED IN TABLES ± REQUESTED TOLERANCE WHEN MEASURED AT OR
REFERRED TO 1000 ± 20 HZ AND 25 ± 5 °C.
TOLERANCE: ±3%, ±5%, ±10%, AND ±20% AVAILABLE. OTHER TOLERANCES AVAILABLE UPON
REQUEST.
DISSIPATION FACTOR: SHALL NOT BE GREATER THAN 0.1% WHEN MEASURED AT OR REFERRED TO
1000 ± 20 HZ AND 25 ± 5 °C.
INSULATION RESISTANCE: SHALL BE GREATER THAN 30,000 MΩ WHEN MEASURED AFTER 1 MINUTE
ELECTRIFICATION AT 250VDC AND 25 ± 5 °C.
DIELECTRIC STRENGTH: 150% RATED VOLTAGE FOR 1 MINUTE THROUGH A LIMITING RESISTANCE
OF 100 OHMS/VOLT AT 25 ± 5 °C.
RATED VOLTAGE: 800VDC/370VAC, 1000VDC/400VAC, 1250VDC/450VAC, 1600VDC/500VAC,
2000VDC/550VAC, AND 2500VDC/600VAC AVAILABLE.
TEMPERATURE: -55 °C TO +85 °C AT FULL RATED VOLTAGE.
ADDITIONAL INFORMATION
ORDERING INFORMATION: ALL ASC CAPACITORS ARE ORDERED BY "FAMILY CAP-TOL-VOLT"
DESIGNATION. (I.E. TO ORDER AN X315 0.1µF, ±10%, 1000VDC CAPACITOR, REQUEST PART NUMBER
"X315 .1-10-1000")
SEE ALSO: "GENERAL INFORMATION - POLYPROPYLENE CAPACITORS" DOCUMENT FOR ADDITIONAL
PHYSICAL, ELECTRICAL, AND PERFORMANCE CHARACTERISTICS NOT MENTIONED IN THIS FILE.
WARNING: INFORMATION ON THIS FILE IS SUBJECT TO CHANGE WITHOUT NOTICE AT ASC'S
DISCRETION.
LAST MODIFIED: 08/23/01
PAGE 7 OF 7
METALLIZED POLYPROPYLENE/FOIL HYBRID
EPOXY DIPPED CASE