1
2014.9e
■Features
1. Low profile on the PCB
When mounted on the PCB surface the
receptacle height is 2.0 mm.(Fig.1)
2. Strong Construction
Use of metal shell guarantees that fully mated
connectors will withstand 30 N max. force
applied on the plug in any direction.(Fig.2)
3. High contact reliability
Bellows contact with long mating stroke provides
highly reliable mating as well as soft insertion
feeling.
Mating durability is up to 5,000 times long.
4. Sequenced contact mating
The protection of the circuit is assured by having
the 2 contact at each end of the receptacle are
longer by 0.5 mm, with electrical wipe of 1.45
mm. Location of the circuit protection contacts
can be changed as required.
Remaining contacts electrical wipe is 0.95 mm.
5. Incorrect Insertion Prevention
Connectors will not be damaged when angled or
reverse plug insertion is attempted.(Fig.3)
6. Safety plug release
Plug will release when an excessive pull force is
applied to the cable.
7. RoHS Compliant
All materials and substances used to produce
this product comply with RoHS standards.
■Applications
DSC, PDA, thin electronic equipment, mobile
phones and other portable devices requiring high
durability interface connectors.
2.9
Existing 3200 Series LX Series
2
30N
30N
■Overview
LX Series is a super low profile interface
connector with sequential mating design and
friction lock, which has been developed for low
profile mobile terminals.
This connenctor features ESD problem
prevention in 0.5 mm terminal pitch and 2.0 mm
small and low profile design, which makes it
suitable to small mobile devices.
Angled insertion Reversed insertion
Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height
LX Series
Lower Profile
Strong Construction
Incorrect insertion prevention
Fig.1
Fig.2
Fig.3
2
LX Series●Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height
■Product specifications
■Materials / Finish
Insulator
Contacts
Shell
Synthetic resin
Copper alloy
Stainless steel
Black
Contact area: Gold plated
Mounting area: Gold flash plated
Soldering area: Gold flash plated
UL94V-0
--------------
--------------
Component Material Finish/Color Remarks
■Ordering information
LX 60 -16 S
1 2 3 4
LX 40 -16 P
1 2 3 4
●Receptacles
●Plugs
LX 40 -16 BS(4.5)
1 2 3 5
●Bushing
Ratings
Current rating
Voltage rating
0.5A
(1A max. can be carried via 2 random contacts)
50V AC
Operating temperature range : –40ç to +70ç
Storage temperature range : –55ç to +85ç
●Plugs
●Receptacles
Insulator
Contacts
Metal shield
Covers
Strain relief clamp
Self tapping screws
Synthetic resin
Copper alloy
Stainless steel
Synthetic resin
Copper alloy
Steel
Black
Contact area: Gold plated
Termination area: Gold flash plated
--------------
Black
--------------
Trivalent black chromate
UL94V-0
--------------
--------------
UL94V-0
--------------
Screw size: M2
Component Material Finish/Color Remarks
70mø max.
1000 Mø min. (dry)
10 Mø min. (high humidity)
No flashover or insulation breakdown.
Mating: 10N max., un-mating: 4N min.
Amount of change of contact resistance: 20mø max.
No electrical discontinuity of 1µ sec. Max.
Contact resistance: 20mø max.
Contact resistance: 20mø max.
Insulation resistance: 10Mø min.
Contact resistance: 20mø max.
Insulation resistance: 10Mø min.
No heavy corrosions
100mA DC
100V DC
250V AC / one minute
With corresponding connector.
5,000 times
Acceleration of 490 m/s2, 11 ms duration,
sine half-wave waveform, 3 cycles, 3 axis.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
acceleration of 98 m/s2, 2 hours, 3 axis.
Temperature: –55ç ➝ +5ç to +35ç ➝ +85ç ➝ +5ç to +35ç
Time : 30 ➝ 2 to 3 ➝ 30 ➝ 2 to 3 min
5% water solution at 35°C for 48 hours
1.Contact resistance
2.Insulation resistance
3.
Withstanding voltage
4.
Mating/un-mating forces
5. Durability
(mating/n-mating)
6. Shock
7. Vibration
8.
Temperature cycle
9. Salt spray
Characteristic Specification Conditions
Series number : LX
Termination type
40 : Solder type
60 : Right angle SMT
Number of contacts : 12, 16, 20
Contact type
P : Male contact (Plug)
S : Female contact (Receptacle)
Bushing
BS(4.0) : Dia. 4.0mm cable
BS(4.5) : Dia. 4.5mm cable
BS(5.0) : Dia. 5.0mm cable
1
2
3
4
5
3
LX Series●Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height
■Receptacles
Part No. HRS No. Packaging RoHS
LX60-12S
LX60-16S
LX60-20S
245-0018-3
245-0001-0
245-0016-8
2,000 pcs/reel
4
2.55(5.5)
P=0.5
10.6
No.12
2
No.1
Ø1
0.8
R0.5
6.5
3.6
(5.5)
P=0.5 0.35
1.2
0.3 5.7
1.91.9
4
2.8
2-Ø1.1 Hole
6.5
7.8
1.5
3.8
No conductive traces in this area Land area
PCB edge
BRecommended PCB mounting pattern
●12 pos.
P=0.5
(7.5)
5
2
2.55
No.1
12.6
No.16
0.8
Ø1
R0.5
6.5
3.6
No conductive traces in this area Land area
(7.5)
P=0.5 0.35
PCB edge
9.8
8.5
3.8
0.3 5.7
1.9
1.2
1.9
5
2.8
2-Ø1.1 Hole
1.5
BRecommended PCB mounting pattern
●16 pos.
(9.5)
P=0.5
2.55
6.7
14.6
No.20
2
No.1
0.8
Ø1
R0.5
6.5
3.6
1.2
(9.5)
P=0.5 0.35
PCB edge
3.8
0.3 5.7
1.91.9
7
2.8
2-Ø1.1
Hole
10.5
11.8
1.5
No conductive traces in this area Land area
BRecommended PCB mounting pattern
●20 pos.
4
LX Series●Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height
Ø5.9
14.8
(R3.2)
6.2 21.4
(R1.4)
No.12
8
5.1
No.1
■Plugs
Part No. HRS No. Packaging RoHS
LX40-12P
LX40-16P
LX40-20P
245-0019-6
245-0002-3
245-0017-0
1
●12 pos.
●16 pos. ●20 pos.
No.1
(R1.4)
16.8
(R3.8)
21.46.2
Ø6.4
No.16
8
5.1
21.46.2
(R1.4)
(R3.8)
18.8
Ø6.9
5.5
8.4
No.20No.1
■Bushing
Part No. HRS No. Packaging RoHS
LX40-12BS(4.0)
LX40-16BS(4.5)
LX40-20BS(5.0)
245-0020-5
245-0021-8
245-0022-0
100 pcs/pack
5
LX Series●Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height
Receptacle Packaging Specifications
●Embossed carrier tape dimensions ●Reel dimensions
4
C
Unreeling directions
4
2
Ø1.5
B 1.75
A
(Inside dimension)
(Outside dimension)
Unreeling directions
Ø380
Ø80
D
E
30
Ø13
Part No. A B C
LX60-12S
LX60-16S
LX60-20S
24 12
(mm)
11.5
Part No. D E
LX60-12S
LX60-16S
LX60-20S
25.5 29.5
(mm)
Receptacles Recommended Temperature Profile
Applicable Plug Cable
BMated Condition Dimensions
Note 1: Applicable cable sizes are guidelines. (There may be slight differences depending on the cable outer insulation)
Note 2: Cables must be attached using single piece overmolded bushings on the cable.
Note 3: Please refer to applicable Cable Termination Procedures Manual for correct plug assembly and cable termination.
Note 4: Contact HRS for cable assemblies.
'*%
'%%
&*%
&%%
*%
&-%
&*%
'(%b^c#
.%¤(%h (%¤&%h
E:6@/'*%
*
%
0.5
Plug 2
1.4
(mm)
Receptacle
2
This measurement is performed on the contact
lead section.
The temperature profile may vary due to external
conditions such as the type of cream solder,
manufacturer, and board size. Please contact the
solder manufacturer for their specifications.
Cable diameter Wire sizePart No.
Ø4 max.
Ø4.5 max.
Ø5 max.
Ø0.6 mm max. (AWG#30 to 32 or equivalent)
LX40-12P
LX40-16P
LX40-20P
(mm)
6
LX Series●Ultra Low-profile Interface Connectors with 2.0 mm Mounting Height
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 09/2014. Contents are subject to change without notice for the purpose of improvements.
USA:
HIROSE ELECTRIC (U.S.A.), INC. San Jose Office
3255 Scott Boulevard, Building 7, Suite 101
Santa Clara, CA 95054
Phone : +1-408-253-9640
Fax : +1-408-253-9641
http://www.hiroseusa.com
USA:
HIROSE ELECTRIC (U.S.A.), INC. Headquarters
2688 Westhills Court, Simi Valley, CA 93065-6235
Phone : +1-805-522-7958
Fax : +1-805-522-3217
http://www.hiroseusa.com
HONG KONG:
HIROSE ELECTRIC HONGKONG TRADING CO., LTD.
Room 1001, West Wing, Tsim Sha Tsui Centre, 66
Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong
Phone : +852-2803-5338
Fax : +852-2591-6560
http://www.hirose-hongkong.com.hk
CHINA:
HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH
A1001, Ocean International Center, Building 56# East 4th
Ring Middle Road, ChaoYang District, Beijing, 100025
Phone : +86-10-5165-9332
Fax : +86-10-5908-1381
http://www.hirose-china.com.cn
TAIWAN:
HIROSE ELECTRIC TAIWAN CO., LTD.
103 8F, No.87, Zhengzhou Rd., Taipei
Phone : +886-2-2555-7377
Fax : +886-2-2555-7350
http://www.hirose-taiwan.com.tw
GERMANY:
HIROSE ELECTRIC EUROPE B.V. German Branch
Herzog-Carl-Strasse 4 D-73760 Ostfildern
(Scharnhauser Park)
Phone : +49-711-4560-02-1
Fax : +49-711-4560-02-299
http://www.hirose.de
GERMANY:
HIROSE ELECTRIC EUROPE B.V. Nuernberg Office
Muggenhofer Str. 136 90429 Nuernberg
Phone : +49-911 32 68 89 63
Fax : +49-911 32 68 89 69
http://www.hirose.de
INDIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD. Bangalore Liaison office
Unit No.03, Ground Floor, Explorer Building International Tech
Park Whitefield Road, Bangalore 560066 Karnataka, India
Phone : +91-80-4120 1907
Fax : +91-80-4120 9908
http://www.hirose-singapore.com.sg
SINGAPORE:
HIROSE ELECTRIC SINGAPORE PTE. LTD.
10 Anson Road #26-1, International Plaza
079903, Singapore
Phone : +65-6324-6113
Fax : +65-6324-6123
http://www.hirose-singapore.com.sg
THE NETHERLANDS:
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : +31-20-6557460
Fax : +31-20-6557469
http://www.hiroseeurope.com
UNITED KINGDOM:
Hirose Electric Europe BV (UK Branch)
4 Newton Court, Kelvin Drive, Knowlhill,
Milton Keynes, MK5 8NH
Phone : +44-1908 202050
Fax : +44-1908 202058
USA:
HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive)
37677 Professional Center Drive, Suite #100C
Livonia, MI 48154
Phone : +1-734-542-9963
Fax : +1-734-542-9964
http://www.hiroseusa.com
CHINA:
HIROSE ELECTRIC (SHANGHAI) CO., LTD.
1601, Henderson Metropolitan, NO.300, East Nanjing
Road, Huangpu District, Shanghai, China 200001
Phone : +86-21-6391-3355
Fax : +86-21-6391-3335
http://www.hirose-china.com.cn
CHINA:
HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD.
Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre,
5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008
Phone : +86-755-8207-0851
Fax : +86-755-8207-0873
http://www.hirose-china.com.cn
KOREA:
HIROSE KOREA CO., LTD.
1261-10, Jeoungwhang-Dong, Shihung-City,
Kyunggi-Do 429-450
Phone : +82-31-496-7000,7124
Fax : +82-31-496-7100
http://www.hirose.co.kr
INDIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD Delhi Liaison Office
Office NO.519, Regus-Green Boulevard, Level5, Tower C,
Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India
Phone : +91-12-660-8018
Fax : +91-120-4804949
http://www.hirose.com/sg/
MALAYSIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD (Representative office)
1-10-07, Suntech @ Penang Cybercity (1164),Lintang
Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia.
Phone : +604-619-2564
Fax : +604-619-2574
http://www.hirose.com/sg/
2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: +81-45-620-3526 Fax: +81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
®
