
2www.fairchildsemi.com
FQP12N60C / FQPF12N60C Rev. B1
FQP12N60C / FQPF12N60C 600V N-Channel MOSFET
Package Marking and Ordering Information
Electrical Characteristics TC = 25°C unless otherwise noted
Notes:
1. Repetitive Rating: Pulse width limited by maximum junction temperature
2. L = 11mH, IAS = 12A, VDD = 50V, RG = 25Ω, Starting TJ = 25°C
3. ISD ≤ 12A, di/dt ≤ 200A/µs, VDD ≤ BVDSS, Starting TJ = 25°C
4. Pulse Test: Pulse width ≤ 300µs, Duty Cycle ≤ 2%
5. Essentially Independent of Operating Temperature Typical Characteristics
Device Marking Device Package Reel Size Tape Width Quantity
FQP12N60C FQP12N60C TO-220 - - 50
FQPF12N60C FQPF12N60C TO-220F - - 50
Symbol Parameter Conditions Min Typ Max Units
Off Characteristics
BVDSS Drain-Source Breakdown Voltage VGS = 0V, ID = 250µA, TJ = 25°C 600 -- -- V
∆BVDSS
/ ∆TJ
Breakdown Voltage Temperature
Coefficient ID = 250µA, Referenced to 25°C--0.5--V/°C
IDSS Zero Gate Voltage Drain Current VDS = 600V, VGS = 0V
VDS = 480V, TC = 125°C
--
--
--
--
1
10
µA
µA
IGSSF Gate-Body Leakage Current, Forward VGS = 30V, VDS = 0V -- -- 100 nA
IGSSR Gate-Body Leakage Current, Reverse VGS = -30V, VDS = 0V -- -- -100 nA
On Characteristics
VGS(th) Gate Threshold Voltage VDS = VGS, ID = 250µA2.0--4.0V
RDS(on) Static Drain-Source
On-Resistance VGS = 10V, ID = 6A -- 0.53 0.65 Ω
gFS Forward Transconductance VDS = 40V, ID = 6A (Note 4) -- 13 -- S
Dynamic Characteristics
Ciss Input Capacitance VDS = 25V, VGS = 0V,
f = 1.0MHz
-- 1760 2290 pF
Coss Output Capacitance -- 182 235 pF
Crss Reverse Transfer Capacitance -- 21 28 pF
Switching Characteristics
td(on) Turn-On Delay Time VDD = 300V, ID = 12A
RG = 25Ω
(Note 4, 5)
-- 30 70 ns
trTurn-On Rise Time -- 85 180 ns
td(off) Turn-Off Delay Time -- 140 280 ns
tfTurn-Off Fall Time -- 90 190 ns
QgTotal Gate Charge VDS = 400V, ID = 12A
VGS = 10V
(Note 4, 5)
-- 48 63 nC
Qgs Gate-Source Charge -- 8.5 -- nC
Qgd Gate-Drain Charge -- 21 -- nC
Drain-Source Diode Characteristics and Maximum Ratings
ISMaximum Continuous Drain-Source Diode Forward Current -- -- 12 A
ISM Maximum Pulsed Drain-Source Diode Forward Current -- -- 48 A
VSD Drain-Source Diode Forward Voltage VGS = 0V, IS = 12A -- -- 1.4 V
trr Reverse Recovery Time VGS = 0V, IS = 12A
dIF/dt =100A/µs (Note 4)
-- 420 -- ns
Qrr Reverse Recovery Charge -- 4.9 -- µC
http://store.iiic.cc/