1
Motorola Small–Signal Transistors, FETs and Diodes Device Data
NPN Silicon
MAXIMUM RATINGS
Rating Symbol MPS918 MPS3563 Unit
Collector–Emitter Voltage VCEO 15 12 Vdc
Collector–Base Voltage VCBO 30 30 Vdc
Emitter–Base Voltage VEBO 3.0 2.0 Vdc
Collector Current — Continuous IC50 mAdc
Total Device Dissipation @ TA = 25°C
Derate above 25°CPD350
2.8 mW
mW/°C
Total Device Dissipation @ TC = 25°C
Derate above 25°CPD0.85
6.8 Watts
mW/°C
Operating and Storage Junction
Temperature Range TJ, Tstg –55 to +150 °C
THERMAL CHARACTERISTICS
Characteristic Symbol Max Unit
Thermal Resistance, Junction to Ambient R
q
JA(1) 357 °C/W
Thermal Resistance, Junction to Case R
q
JC 147 °C/W
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic Symbol Min Max Unit
OFF CHARACTERISTICS
Collector–Emitter Breakdown Voltage(2)
(IC = 3.0 mAdc, IB = 0) MPS918
MPS3563
V(BR)CEO 15
12 —
—
Vdc
Collector–Base Breakdown Voltage
(IC = 1.0
m
Adc, IE = 0) MPS918
(IC = 100
m
Adc, IE = 0) MPS3563
V(BR)CBO 30
30 —
—
Vdc
Emitter–Base Breakdown Voltage
(IE = 10
m
Adc, IC = 0) MPS918
MPS3563
V(BR)EBO 3.0
2.0 —
—
Vdc
Collector Cutoff Current
(VCB = 15 Vdc, IE = 0) MPS918
MPS3563
ICBO —
—10
50
nAdc
1. R
q
JA is measured with the device soldered into a typical printed circuit board.
2. Pulse Test: Pulse Width
v
300
m
s; Duty Cycle
v
1.0%.
Preferred devices are Motorola recommended choices for future use and best overall value.
Order this document
MPS918/D
SEMICONDUCTOR TECHNICAL DATA
*Motorola Preferred Device
CASE 29–04, STYLE 1
TO–92 (TO–226AA)
123
Motorola, Inc. 1996
COLLECTOR
3
2
BASE
1
EMITTER
2 Motorola Small–Signal Transistors, FETs and Diodes Device Data
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) (Continued)
Characteristic Symbol Min Max Unit
ON CHARACTERISTICS
DC Current Gain(2)
(IC = 3.0 mAdc, VCE = 1.0 Vdc) MPS918
(IC = 8.0 mAdc, VCE = 10 Vdc) MPS3563
hFE 20
20 —
200
—
Collector–Emitter Saturation Voltage
(IC = 10 mAdc, IB = 1.0 mAdc) MPS918 VCE(sat) — 0.4 Vdc
Base–Emitter Saturation Voltage
(IC = 10 mAdc, IB = 1.0 mAdc) MPS918 VBE(sat) — 1.0 Vdc
SMALL–SIGNAL CHARACTERISTICS
Current–Gain — Bandwidth Product(2)
(IC = 4.0 mAdc, VCE = 10 Vdc, f = 100 MHz) MPS918
(IC = 8.0 mAdc, VCE = 10 Vdc, f = 100 MHz) MPS3563
fT600
600 —
1500
MHz
Output Capacitance
(VCB = 0 Vdc, IE = 0, f = 1.0 MHz) MPS918
(VCB = 10 Vdc, IE = 0, f = 1.0 MHz) MPS918
(VCB = 10 Vdc, IE = 0, f = 1.0 MHz) MPS3563
Cobo —
—
—
3.0
1.7
1.7
pF
Input Capacitance
(VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz) MPS918 Cibo — 2.0 pF
Small–Signal Current Gain
(IC = 8.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) MPS3563 hfe 20 250 —
Noise Figure
(IC = 1.0 mAdc, VCE = 6.0 Vdc, RS = 400 kΩ, f = 60 MHz) MPS918 NF — 6.0 dB
FUNCTIONAL TEST
Common–Emitter Amplifier Power Gain
(IC = 6.0 mAdc, VCB = 12 Vdc, f = 200 MHz) MPS918
(IC = 8.0 mAdc, VCE = 10 Vdc, f = 200 MHz) MPS3563
(Gfd + Gre
t
–20 dB)
Gpe 15
14 —
—
dB
Power Output
(IC = 8.0 mAdc, VCB = 15 Vdc, f = 500 MHz) MPS918 Pout 30 — mW
Oscillator Collector Efficiency
(IC = 8.0 mAdc, VCB = 15 Vdc, Pout = 30 mW, f = 500 MHz) MPS918 η25 — %
2. Pulse Test: Pulse Width
v
300
m
s; Duty Cycle
v
1.0%.
3
Motorola Small–Signal Transistors, FETs and Diodes Device Data
PACKAGE DIMENSIONS
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
IS UNCONTROLLED.
4. DIMENSION F APPLIES BETWEEN P AND L.
DIMENSION D AND J APPLY BETWEEN L AND K
MINIMUM. LEAD DIMENSION IS UNCONTROLLED
IN P AND BEYOND DIMENSION K MINIMUM.
R
A
P
J
L
F
B
K
G
HSECTION X–X
C
V
D
N
N
X X
SEATING
PLANE DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.175 0.205 4.45 5.20
B0.170 0.210 4.32 5.33
C0.125 0.165 3.18 4.19
D0.016 0.022 0.41 0.55
F0.016 0.019 0.41 0.48
G0.045 0.055 1.15 1.39
H0.095 0.105 2.42 2.66
J0.015 0.020 0.39 0.50
K0.500 ––– 12.70 –––
L0.250 ––– 6.35 –––
N0.080 0.105 2.04 2.66
P––– 0.100 ––– 2.54
R0.115 ––– 2.93 –––
V0.135 ––– 3.43 –––
1
STYLE 1:
PIN 1. EMITTER
2. BASE
3. COLLECTOR
CASE 029–04
(TO–226AA)
ISSUE AD
4 Motorola Small–Signal Transistors, FETs and Diodes Device Data
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty , representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit,
and specifically disclaims any and all liability , including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different
applications. All operating parameters, including “T ypicals” must be validated for each customer application by customer’s technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body , or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer .
How to reach us:
USA/EUROPE: Motorola Literature Distribution; JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki,
P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447 6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315
MFAX: RMFAX0@email.sps.mot.com – TOUCHTONE (602) 244–6609 HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
INTERNET: http://Design–NET.com 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
MPS918/D
◊
