FDS6670AS 30V N-Channel PowerTrench(R) SyncFETTM General Description Features The FDS6670AS is designed to replace a single SO-8 MOSFET and Schottky diode in synchronous DC:DC power supplies. This 30V MOSFET is designed to maximize power conversion efficiency, providing a low and low gate charge. The FDS6670AS RDS(ON) includes an integrated Schottky diode using Fairchild's monolithic SyncFET technology. * 13.5 A, 30 V. RDS(ON) max= 9.0 m @ VGS = 10 V RDS(ON) max= 11.5 m @ VGS = 4.5 V * Includes SyncFET Schottky body diode * Low gate charge (27nC typical) * High performance trench technology for extremely low RDS(ON) and fast switching Applications * * DC/DC converter High power and current handling capability * Low side notebook D D D D SO-8 S S S G Absolute Maximum Ratings Symbol 5 4 6 3 7 2 8 1 TA=25oC unless otherwise noted Ratings Units VDSS Drain-Source Voltage Parameter 30 V VGSS Gate-Source Voltage 20 V ID Drain Current (Note 1a) 13.5 A PD Power Dissipation for Single Operation (Note 1a) 2.5 (Note 1b) 1.2 - Continuous - Pulsed 50 (Note 1c) TJ, TSTG W 1 -55 to +150 C (Note 1a) 50 C/W (Note 1) 25 C/W Operating and Storage Junction Temperature Range Thermal Characteristics RJA Thermal Resistance, Junction-to-Ambient RJC Thermal Resistance, Junction-to-Case Package Marking and Ordering Information Device Marking Device Reel Size Tape width Quantity FDS6670AS FDS6670AS 13'' 12mm 2500 units FDS6670AS FDS6670AS_NL (Note 4) 13'' 12mm 2500 units (c)2005 Fairchild Semiconductor Corporation FDS6670AS Rev A (X) FDS6670AS March 2005 Symbol Parameter TA = 25C unless otherwise noted Test Conditions Min Typ Max Units Off Characteristics BVDSS BVDSS TJ IDSS IGSS Drain-Source Breakdown Voltage Breakdown Voltage Temperature Coefficient VGS = 0 V, ID = 1 mA Zero Gate Voltage Drain Current VDS = 24 V, VGS = 0 V 500 A Gate-Body Leakage VGS = 20 V, VDS = 0 V 100 nA 3 V On Characteristics 30 V 31 ID = 1 mA, Referenced to 25C mV/C (Note 2) VGS(th) VGS(th) TJ RDS(on) Gate Threshold Voltage Gate Threshold Voltage Temperature Coefficient Static Drain-Source On-Resistance VDS = VGS, ID = 1 mA ID(on) On-State Drain Current VGS = 10 V, VDS = 5 V gFS Forward Transconductance VDS = 10 V, ID = 13.5 A VDS = 15 V, f = 1.0 MHz V GS = 0 V, 1 1.7 ID = 1 mA, Referenced to 25C -3.3 VGS = 10 V, ID = 13.5 A ID = 11.2 A VGS = 4.5 V, VGS=10 V, ID =13.5A, TJ=125C 7.5 9 10 mV/C 9 11.5 12.5 50 m A 66 S 1540 pF 440 pF 160 pF Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Gate Resistance Switching Characteristics td(on) VGS = 15 mV, f = 1.0 MHz (Note 2) Turn-On Delay Time tr Turn-On Rise Time td(off) Turn-Off Delay Time tf Turn-Off Fall Time td(on) Turn-On Delay Time tr Turn-On Rise Time td(off) Turn-Off Delay Time tf Turn-Off Fall Time 2.1 VDS = 15 V, VGS = 10 V, VDS = 15 V, VGS = 4.5 V, ID = 1 A, RGEN = 6 ID = 1 A, RGEN = 6 10 20 ns ns 5 10 27 44 ns 18 32 ns 13 23 ns 15 27 ns 24 38 ns 13 23 ns Qg(TOT) Total Gate Charge at Vgs=10V Qg Total Gate Charge at Vgs=5V Qgs Gate-Source Charge 4.2 nC Qgd Gate-Drain Charge 5.1 nC VDD = 15 V, ID = 13.5 A, 27 38 nC 16 22 nC FDS6670AS Rev A (X) FDS6670AS Electrical Characteristics Symbol Parameter TA = 25C unless otherwise noted Test Conditions Min Typ Max Units Drain-Source Diode Characteristics and Maximum Ratings trr Drain-Source Diode Forward Voltage Diode Reverse Recovery Time Qrr Diode Reverse Recovery Charge VSD Notes: 1. VGS = 0 V, IS = 3.5 A VGS = 0 V, IS = 7 A IF = 13.5A, diF/dt = 300 A/s (Note 2) 0.5 0.6 20 (Note 3) 15 (Note 2) 0.7 V nS nC RJA is the sum of the junction-to-case and case-to-ambient thermal resistance where the case thermal reference is defined as the solder mounting surface of the drain pins. RJC is guaranteed by design while RCA is determined by the user's board design. a) 50C/W when mounted on a 1 in2 pad of 2 oz copper b) 105C/W when mounted on a .04 in2 pad of 2 oz copper c) 125C/W when mounted on a minimum pad. Scale 1 : 1 on letter size paper 2. Pulse Test: Pulse Width < 300s, Duty Cycle < 2.0% 3. See "SyncFET Schottky body diode characteristics" below. 4. FDS6670AS_NL is a lead free product. The FDS6670AS_NL marking will appear on the reel label. FDS6670AS Rev A (X) FDS6670AS Electrical Characteristics FDS6670AS Typical Characteristics 50 2.6 VGS = 10V RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE 3.5V ID, DRAIN CURRENT (A) 4.0V 40 4.5V 6.0V 3.0V 30 20 10 2.5V 2.2 VGS = 3.0V 1.8 3.5V 1.4 4.5V 10V 0.6 0 0.5 1 1.5 VDS, DRAIN-SOURCE VOLTAGE (V) 0 2 10 20 30 40 50 ID, DRAIN CURRENT (A) Figure 1. On-Region Characteristics. Figure 2. On-Resistance Variation with Drain Current and Gate Voltage. 1.4 0.025 ID = 13.5A VGS = 10V RDS(ON), ON-RESISTANCE (OHM) RDS(ON), NORMALIZED DRAIN-SOURCE ON-RESISTANCE 6.0V 1 0 1.2 1 0.8 0.6 ID = 6.75A 0.02 0.015 o TA = 125 C 0.01 o TA = 25 C 0.005 -50 -25 0 25 50 75 o TJ, JUNCTION TEMPERATURE ( C) 100 125 2 Figure 3. On-Resistance Variation with Temperature. 4 6 8 VGS, GATE TO SOURCE VOLTAGE (V) 10 Figure 4. On-Resistance Variation with Gate-to-Source Voltage. 10 50 VGS = 0V IS, REVERSE DRAIN CURRENT (A) VDS = 5V 40 ID, DRAIN CURRENT (A) 4.0V 30 20 TA = 125oC o -55 C 10 25oC 0 1 TA = 125oC o 25 C 0.1 o -55 C 0.01 0.001 1 1.5 2 2.5 3 VGS, GATE TO SOURCE VOLTAGE (V) Figure 5. Transfer Characteristics. 3.5 0 0.1 0.2 0.3 0.4 0.5 VSD, BODY DIODE FORWARD VOLTAGE (V) 0.6 Figure 6. Body Diode Forward Voltage Variation with Source Current and Temperature. FDS6670AS Rev A (X) 2400 ID =13.5A f = 1MHz VGS = 0 V VDS = 10V 20V 8 CAPACITANCE (pF) VGS, GATE-SOURCE VOLTAGE (V) 10 15V 6 4 1800 Ciss 1200 Coss 600 2 Crss 0 0 0 5 10 15 20 Qg, GATE CHARGE (nC) 25 0 30 Figure 7. Gate Charge Characteristics. 30 50 P(pk), PEAK TRANSIENT POWER (W) RDS(ON) LIMIT ID, DRAIN CURRENT (A) 10 15 20 25 VDS, DRAIN TO SOURCE VOLTAGE (V) Figure 8. Capacitance Characteristics. 100 100s 1ms 10ms 10 100ms 1s 10s DC 1 VGS = 10V SINGLE PULSE RJA = 125oC/W 0.1 o TA = 25 C 0.01 0.01 0.1 1 10 VDS, DRAIN-SOURCE VOLTAGE (V) 100 SINGLE PULSE RJA = 125C/W TA = 25C 40 30 20 10 0 0.001 Figure 9. Maximum Safe Operating Area. r(t), NORMALIZED EFFECTIVE TRANSIENT THERMAL RESISTANCE 5 0.01 0.1 1 t1, TIME (sec) 10 100 1000 Figure 10. Single Pulse Maximum Power Dissipation. 1 D = 0.5 RJA(t) = r(t) * RJA RJA = 125 C/W 0.2 0.1 0.1 0.05 P(pk) 0.02 t1 0.01 t2 0.01 TJ - TA = P * RJA(t) Duty Cycle, D = t1 / t2 SINGLE PULSE 0.001 0.0001 0.001 0.01 0.1 1 10 100 1000 t1, TIME (sec) Figure 11. Transient Thermal Response Curve. Thermal characterization performed using the conditions described in Note 1c. Transient thermal response will change depending on the circuit board design. FDS6670AS Rev A (X) FDS6670AS Typical Characteristics (continued) FDS6670AS Typical Characteristics (continued) SyncFET Schottky Body Diode Characteristics Schottky barrier diodes exhibit significant leakage at high temperature and high reverse voltage. This will increase the power in the device. 0.1 CURRENT : 0.4A/div IDSS, REVERSE LEAKAGE CURRENT (A) Fairchild's SyncFET process embeds a Schottky diode in parallel with PowerTrench MOSFET. This diode exhibits similar characteristics to a discrete external Schottky diode in parallel with a MOSFET. Figure 12 shows the reverse recovery characteristic of the FDS6670AS. 0.01 125oC 0.001 100oC 0.0001 25oC 0.00001 0 10 20 VDS, REVERSE VOLTAGE (V) 30 Figure 14. SyncFET body diode reverse leakage versus drain-source voltage and temperature. TIME : 12.5ns/div Figure 12. FDS6670AS SyncFET body diode reverse recovery characteristic. CURRENT : 0.4A/div For comparison purposes, Figure 13 shows the reverse recovery characteristics of the body diode of an equivalent size MOSFET produced without SyncFET (FDS6670A). TIME : 12.5ns/div Figure 13. Non-SyncFET (FDS6670A) body diode reverse recovery characteristic. FDS6670AS Rev A (X) TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM FAST ActiveArrayTM FASTrTM BottomlessTM FPSTM CoolFETTM FRFETTM CROSSVOLTTM GlobalOptoisolatorTM DOMETM GTOTM EcoSPARKTM HiSeCTM E2CMOSTM I2CTM EnSignaTM i-LoTM FACTTM ImpliedDisconnectTM FACT Quiet SeriesTM IntelliMAXTM ISOPLANARTM LittleFETTM MICROCOUPLERTM MicroFETTM MicroPakTM MICROWIRETM MSXTM MSXProTM OCXTM OCXProTM Across the board. Around the world.TM OPTOLOGIC OPTOPLANARTM The Power Franchise PACMANTM Programmable Active DroopTM POPTM Power247TM PowerEdgeTM PowerSaverTM PowerTrench QFET QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM SerDesTM SILENT SWITCHER SMART STARTTM SPMTM StealthTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogic TINYOPTOTM TruTranslationTM UHCTM UltraFET UniFETTM VCXTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I15