SIDACtor® Protection Thyristors
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/23/17
Baseband Protection (Voice-DS1)
Description
SIDACtor® Series - SMA
SIDACtor® SMA Thyristors Series are designed to
protect baseband equipment such as phones, faxes,
modems, line cards, CPE and DSL from damaging
overvoltage transients.
The series provides a surface mount solution that
enables equipment to comply with global regulatory
standards.
Electrical Characteristics
Features and Benefits
• Low voltage overshoot
• Low on-state voltage
• Does not degrade
surge capability after
multiple surge events
within limit.
• RoHS Compliant and
Halogen-Free
• Fails short circuit when
surged in excess of
ratings
• Low capacitance
• Pb-free E3 means 2nd
level interconnect is Pb-
free and the terminal
finish material is tin(Sn)
(IPC/JEDEC J-STD-
609A.01)
Agency Approvals
Agency Agency File Number
E133083
Schematic Symbol
Applicable Global Standards
• TIA-968-A*
• TIA-968-B*
• ITU K.20/21/45 Enhanced
Level*
• ITU K.20/21/45 Basic
Level
• GR 1089 Inter-building*
• GR 1089 Intra-building
• IEC 61000-4-5 2nd
edition
• YD/T 1082
• YD/T 993
• YD/T 950
Notes:
- Absolute maximum ratings measured at TA= 25ºC (unless otherwise noted).
- Components are bi-directional (unless otherwise noted).
* Line impedance required to pass operationally
Part Number Marking
VDRM
@lDRM=5µA
VS
@100V/µs IHISIT
VT
@IT=2.2 Amps
Capacitance
@1MHz, 2V bias
V min V max mA min mA max A max V max pF min pF max
P0080S1ALRP P-8A 6 25 50 800 2.2 4 25 35
P0220S1ALRP P22A 15 32 50 800 2.2 4 10 30
P0300S1ALRP P03A 25 40 50 800 2.2 4 10 30
P0640S1ALRP P06A 58 77 150 800 2.2 4 10 30
P1800S1ALRP P18A 170 220 150 800 2.2 4 10 30
P2300S1ALRP P23A 190 260 150 800 2.2 4 10 30
P2600S1ALRP P26A 220 300 150 800 2.2 4 10 30
P3100S1ALRP P31A 275 350 150 800 2.2 4 10 30
P3500S1ALRP P35A 320 400 150 800 2.2 4 10 30
P0080S1BLRP P-8B 6 25 50 800 2.2 4 20 35
P0220S1BLRP P22B 15 32 50 800 2.2 4 10 30
P0300S1BLRP P03B 25 40 50 800 2.2 4 10 30
P0640S1BLRP P06B 58 77 120 800 2.2 4 10 30
P1800S1BLRP P18B 170 220 120 800 2.2 4 10 30
P2300S1BLRP P23B 190 260 120 800 2.2 4 10 30
P2600S1BLRP P26B 220 300 120 800 2.2 4 10 30
P3100S1BLRP P31B 275 350 120 800 2.2 4 10 30
P3500S1BLRP P35B 320 400 120 800 2.2 4 10 30
RoHS
e3
Pb
SIDACtor® Protection Thyristors
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/23/17
Baseband Protection (Voice-DS1)
Package Symbol Parameter Value Unit
TJOperating Junction Temperature Range -40 to +150 °C
TSStorage Temperature Range -65 to +150 °C
R0JA Thermal Resistance: Junction to Ambient 90 °C/W
Thermal Considerations
DO-214AC
IH
IT
IS
IDRM
VDRM
VT
+
V
-V
+I
-I
VS
50
100
0
t
r
t
d
0
Peak
Value
Half Value
t – Time (µs)
IPP – Peak Pulse Current – %IPP
t
r
= rise time to peak value
t
d
= decay time to half value
Waveform = t
r
x t
d
V-I Characteristics tr x td Pulse Waveform
25°C
Case Temperature (TC) - ºC
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
-40 -20 020406080100 120140 160
Ratio of IH
IH (TC = 25ºC)
Normalized VS Change vs. Junction Temperature
Normalized DC Holding Current vs. Case Temperature
-8
-40 -20 020406080100 120140 160
-6
-4
0
2
4
6
8
10
12
14
Junction Temperature (T
J
) – °C
Percent of V
S
Change – %
25 °C
Surge Ratings
Notes:
1 Current waveform in µs
2 Voltage waveform in µs
- Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product that remains in thermal equilibrium.
- IPP ratings applicable over temperature range of -40ºC to +85ºC
- The component must initially be in thermal equilibrium with -40°C < TJ < +150°C
Series
IPP ITSM
50/60 Hz di/dt
0.2/310 1
0.5/700 2
2/10 1
2/10 2
8/20 1
1.2/50 2
10/160 1
10/160 2
10/560 1
10/560 2
5/320 1
9/720 2
10/360 1
10/360 2
10/1000 1
10/1000 2
5/310 1
10/700 2
A min A min A min A min A min A min A min A min A min A min Amps/µs max
A 20 150 150 90 50 75 75 50 75 20 500
B - 250 250 90 60 75 75 55 75 25 500
SIDACtor® Protection Thyristors
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/23/17
Baseband Protection (Voice-DS1)
Soldering Parameters
Time
Temperature
T
P
T
L
T
S(max)
T
S(min)
25
t
P
t
L
t
S
time to peak temperature
(t 25ºC to peak)
Ramp-down
Ramp-up
Preheat
Critical Zone
T
L
to T
P
Figure 1
Reflow Condition Pb-Free assembly
(see Fig. 1)
Pre Heat
- Temperature Min (Ts(min))+150°C
- Temperature Max (Ts(max))+200°C
- Time (Min to Max) (ts)60-180 secs.
Average ramp up rate (Liquidus Temp (TL)
to peak) 3°C/sec. Max.
TS(max) to TL - Ramp-up Rate 3°C/sec. Max.
Reflow
- Temperature (TL) (Liquidus) +217°C
- Temperature (tL)60-150 secs.
Peak Temp (TP)+260(+0/-5)°C
Time within 5°C of actual Peak Temp (tp)30 secs. Max.
Ramp-down Rate 6°C/sec. Max.
Time 25°C to Peak Temp (TP)8 min. Max.
Do not exceed +260°C
Physical Specifications
Lead Material Copper Alloy
Terminal Finish 100% Matte-Tin Plated
Body Material UL Recognized epoxy meeting
flammability classification V-0
Environmental Specifications
High Temp Voltage
Blocking
80% Rated VDRM (VAC Peak ) +125°C or +150°C,
504 or 1008 hrs. MIL-STD-750 (Method 1040)
JEDEC, JESD22-A-101
Temp Cycling
-65°C to +150°C, 15 min. dwell, 10 up to 100
cycles. MIL-STD-750 (Method 1051) EIA/JEDEC,
JESD22-A104
Biased Temp &
Humidity
52 VDC (+85°C) 85%RH, 504 up to 1008 hrs. EIA/
JEDEC, JESD22-A-101
High Temp Storage +150°C 1008 hrs. MIL-STD-750 (Method 1031)
JEDEC, JESD22-A-101
Low Temp Storage -65°C, 1008 hrs.
Thermal Shock
0°C to +100°C, 5 min. dwell, 10 sec. transfer,
10 cycles. MIL-STD-750 (Method 1056) JEDEC,
JESD22-A-106
Autoclave (Pressure
Cooker Test)
+121°C, 100%RH, 2atm, 24 up to 168 hrs. EIA/
JEDEC, JESD22-A-102
Resistance to Solder
Heat +260°C, 30 secs. MIL-STD-750 (Method 2031)
Moisture Sensitivity
Level
85%RH, +85°C, 168 hrs., 3 reflow cycles
(+260°C Peak). JEDEC-J-STD-020, Level 1
Additional Information
Datasheet Samples
Resources
SIDACtor® Protection Thyristors
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/23/17
Baseband Protection (Voice-DS1)
Part Marking
Part Numbering
Package Type Description Packing Options Quantity Added Suffix Industry Standard
S1 DO-214AC Tape & Reel Pack 12mm/13” tape 5000 RP EIA-481
Packing Options
Pxxx
Date Code
Part Marking Code
(Refer to Electrical Characteristics Table)
xxxxx
CONSTRUCTION
VARIABLE
REEL PACK
IPP RATING
RoHS COMPLIANT
TYPE
P = SIDACtor
P xLRP
MEDIAN VOLTAGE
PACKAGE TYPE
xxx 0S1
A = A rating
B = B rating
Dimensions Inches Millimeters
Min Max Min Max
A 0.049 0.065 1.250 1.650
B 0.157 0.177 3.990 4.500
C 0.100 0.110 2.540 2.790
D 0.078 0.090 1.980 2.290
E 0.030 0.060 0.780 1.520
F - 0.008 - 0.203
G 0.194 0.208 4.930 5.280
H 0.006 0.012 0.152 0.305
I 0.070 - 1.800 -
J 0.082 - 2.100 -
K - 0.090 - 2.300
L 0.082 - 2.100 -
DO-214AC (SMA)
A
D
EG
F
H
C
B
(all dimensions in mm)
I
L
K
J
Solder Pads
Dimensions
0.47
(12.0)
0.157
(4.0)
(4.0)
0.49
(12.5)
0.80 (20.2)
13.0 (330)
Dimensions are in inches
(and millimeters).
Direction of Feed
0.059 DIA
(1.5) Cover tape
Tape and Reel Specification — DO-214AC
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and
test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications.
Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.