SW-500-170 - Bivar, Inc.

shoulder washers

Machine Screw Insulators

• Use with TO-3, TO-3P, TO-66, TO-218, TO-220 and TO-247 Devices

• 125˚C maximum recommended service temperature

• Chemically inert

• Recommended torque of 5 to 6 inch-pounds

www.bivar.com

Screw

Part No. L A B C D Size FIG.

SW-031-120 .031 (0.8)

SW-063-120 .063 (1.6)

SW-093-120 .093 (2.4)

SW-125-120 .125 (3.2) .235 (6.0) .047 (1.2) .120 (3.0) .090 (2.3) 2 1

SW-187-120 .187 (4.8)

SW-250-120 .250 (6.4)

SW-375-120 .375 (9.5)

SW-032-135 .032 (0.8) .215 (5.5) .040 (1.0) .135 (3.4) .116 (3.0) 1

SW-040-140 .040 (1.0) .245 (6.2) .040 (1.0) .140 (3.6) .119 (3.0) 2

SW-125-140 .125 (3.2) .280 (7.1) .042 (1.1) .140 (3.6) .112 (2.8)

SW-030-145 .031 (0.8) .235 (6.0) .047 (1.2) .145 (3.7) .115 (2.9)

SW-031-145 .031 (0.8) .280 (7.1) .047 (1.2) .145 (3.7) .118 (3.0)

SW-063-145 .063 (1.6)

SW-093-145 .093 (2.4) 4 1

SW-125-145 .125 (3.2) .235 (6.0) .047 (1.2) .145 (3.7) .115 (2.9)

SW-187-145 .187 (4.8)

SW-250-145 .250 (6.4)

SW-375-145 .375 (9.5)

SW-125-150 .125 (3.2) .280 (7.1) .042 (1.1) .150 (3.8) .112 (2.8)

SW-185-150 .185 (4.7) .280 (7.1) .042 (1.1) .150 (3.8) .112 (2.8)

SW-031-170 .031 (0.8)

SW-063-170 .063 (1.6)

SW-093-170 .093 (2.4)

SW-125-170 .125 (3.2)

SW-187-170 .187 (4.8) .290 (7.4) .047 (1.2) .170 (4.3) .140 (3.6) 6 1

SW-250-170 .250 (6.4)

SW-375-170 .375 (9.5)

SW-500-170 .500 (12.7)

SW-031-177 .031 (0.8) .312 (7.9) .047 (1.2) .177 (4.5) .144 (3.7)

SW-031-190 .031 (0.8) .312 (7.9) .047 (1.2) .190 (4.8) .146 (3.7)

Material Specifications:

40% Glass filled Polyphenylene Sulfide (PPS)

UL Rated 94V-0

Oxygen Rating Index: Over 45%

Screw

Part No. L A B C D Size FIG.

SW-031-205 .031 (0.8)

SW-063-205 .063 (1.6)

SW-093-205 .093 (2.4)

SW-125-205 .125 (3.2)

SW-187-205 .187 (4.8) .344 (8.7) .063 (1.6) .205 (5.2) .173 (4.4) 8 1

SW-250-205 .250 (6.4)

SW-375-205 .375 (9.5)

SW-500-205 .500 (12.7)

SW-031-260 .031 (0.8)

SW-063-260 .063 (1.6)

SW-093-260 .093 (2.4)

SW-125-260 .125 (3.2)

SW-187-260 .187 (4.8) .399 (10.1) .063 (1.6) .260 (6.6) .200 (5.1) 10 1

SW-250-260 .250 (6.4)

SW-375-260 .375 (9.5)

SW-500-260 .500 (12.7)

SW-031-312 .031 (0.8)

SW-063-312 .063 (1.6)

SW-093-312 .093 (2.4)

SW-125-312 .125 (3.2)

SW-187-312 .187 (4.8) .513 (13.0) .063 (1.6) .312 (7.9) .260 (6.6) 1/4 1

SW-250-312 .250 (6.4)

SW-375-312 .375 (9.5)

SW-500-312 .500 (12.7)

SW-031-360 .031 (0.8)

SW-063-360 .063 (1.6)

SW-093-360 .093 (2.4)

SW-125-360 .125 (3.2)

SW-187-360 .187 (4.8) .620 (15.7) .063 (1.6) .360 (9.1) .320 (8.1) 5/16 1

SW-250-360 .250 (6.4)

SW-375-360 .375 (9.5)

SW-500-360 .500 (12.7)

Standard Drawing Tolerances:

(unless otherwise indicated)

Fractions: 1/64 (0.4)

.X = 0.10 (2.5)

_.XX = 0.01 (0.25)

.XXX = 0.005 (0.13)