oe Onerating Temperature: -55 C + +125 c tee gate Harmonic Type 360 Fisid Adjustable Phase Shift * Broadband Performance Low VSWR and Insertion Loss * Smooth Continuous Adjustment * Meets Mil-E-5400 and Mil-E16400 Environment 2g Midwest Microwave's series of Harmonic Phase Shifters are designed to provide maximum harmonic phase shift over very broadband frequen- cy ranges. They are small, lightweight, ruggedly constructed units that posses consistently low VSWR and insertion loss. They also provide smooth, continuous, and easy phase adjustment through the use of a simple mechanical screw and locking arrangement. SPECIFICATIONS Fundamental Frecuerncy: 2.5-5.0 GHz and 4.8-5.5 GHz, Harmovic Freauency: .0- 10.0 and 9.6-11.0 GHz impaclance: 50 Ohms VSWR: 1.7:1 in Fundamental frequency band typical 2.0:1 in harmonic frequency band typical see table below Ingertion Loss: 0.8 dB max in fuindamental frequency band a 1.0 dB max in harmonic frequency band q O- H | _ Power! 2 Watts average, 2 Watts Peak Se a 1.48 700 |, Gornnectars: Passivated Stainless Steel SMA* A N. +125 DIA THRU 125 ~ 2.25 CBORE .203 DIA - ey .093 DIA THRU -- .58 CRORE .156 DIA : 240 x .095 DP. (4) x 090 DP. (OPT) COURSE PHASE | i SMA ->_ V7 3 my ADJUST HEX SOC. oe H oO. 8 REQUIRED . A 0 SMA O+-> PLUG He @ | Oy O L Model No. PHS-012-FF-GMA73 a Kt 07 40) B80 \ DIA THRU | ask NK MAX. 1.16 CBORE .250 DIA f* .50 +4 PHASE ADJ. x .15 DP. (2) SCREW Madet No, PHS-6347-FF-SMA-73 2.5 - 5.0 5.0 - 10.0 PHS-6077 -FF-SMA-73 360 1.50 1.70 0.80 1.00 4.8-5.5 9.6 - 11.0 PHS-6042-FF-SMA-7S 360 1.75 2.00 0..80 1.00 Note: SMA male, TNC, or Type N output connectors, either male or female, are also available by substituting TNC or NNN for SMA in the Model Number. If an interface gender change is desired, substitute MM or MF for FF in the Model Number. Please note that the housing thickness will increase accordingly when larger connectors are selected. KE ; L MEW EST IEEE : RCI AVE 117 MDWMD00015