
DPA Series
• 16 Pin DIP SSR
• Ratings to 1A @ 280 VAC
• SCR output
• Voltage or current-control input
• Zero-crossing (resistive loads) output
PRODUCT SELECTION
Control Voltage
3.5-10 VDC DPA4119 DPA6119
10-35 mA DPA4111 DPA6111
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS (1)
Description DPA41xx DPA61xx
Operating Voltage (47-63Hz) [Vrms] 20-140 20-280
Transient Overvoltage [Vpk] 400 600
Maximum Off-State Leakage Current @ Rated Voltage [mArms] 0.01 0.01
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3) 500 500
Maximum Load Current [Arms] 1.0 1.0
Minimum Load Current [Arms] 0.025 0.025
Maximum Surge Current (16.6ms) [Apk] 30 30
Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.2 1.2
Minimum Power Factor (with Maximum Load) 0.5 0.5
INPUT SPECIFICATIONS (1)
Description DPAxx11 DPAxx19
Control Voltage Range -3.5-10 VDC
Control Current Range 10-35 mA -
Must Turn Off-State Current 1.0 mA -
Must Turn Off-State Voltage -1.0 VDC
Typical Input Current @ 5 VDC -15 mAdc
Nominal Input Impedance -270 Ohm
Maximum Turn-On Time [msec] 1/2 Cycle 1/2 Cycle
Maximum Turn-Off Time [msec] 1/2 Cycle 1/2 Cycle