RELEASE-TOOL-APD-PIN-CONTA - ITT INTERCONNECT SOLUTIONS

Cannon Microminiature

Connectors Customer

Support Locations

ASIA

Tuopandun Industrial Area, Jinda Cheng,

Xiner Village, Shajing Town,

Baoan District, Shenzhen City,

Guangdong, China 518125

Phone: (86) 755 2726 7238

Fax: (86) 755 2726 7515

GERMANY

Cannonstrasse 1

Weinstadt, 71384

phone: 49.7151.699.0

fax: 49.7151.699.217

ITALY

Corso Europa 41/43

Lainate (MI),

Italy 20020

phone: 39.02938721

fax: 39.0293872300

Jays Close, Viables Estate

Basingstoke, RG22 4BA

phone: 44.1256.311200

fax: 44.1256.323356

USA

666 East Dyer Road

Santa Ana, CA 92705

toll free: 1.800.854.3028

phone: 1.714.557.4700

fax: 1.714.628.2142

ITT Corporation. Specification and other data are based on information available at the

time of printing, and are subject to change without notice.

CMC-08-06

Cannon

Microminiature

Connectors

Electronic Components

High Performance Micro Miniature

Connectors

ITT Cannon is a division of ITT Inc.

Developed first by Cannon in the 1960s,

Cannon's Micro Connector portfolio has

witnessed many product extensions

since then, and it remains the most

extensive in the industry, offering the

most reliable and cost effective range of

micro interconnect solutions. These

innovations have enabled ITT to provide

products and technologies to such

markets as:

• Aerospace

• Computers Systems

• Defense Electronics

• Geophysical

• Industrial Automation

• Medical Electronics

• Network Systems

• Telecom Switching

• Underwater Systems

• Wireless

Offering the broadest selections of stan-

dard and custom micro interconnect

solutions, ITT is the one stop source for

design, development, manufacturing,

and test of sophisticated multi channel

high density connectors. Our product

portfolio consists of rectangular,circular,

quick disconnect, high speed signal, fil-

ter,hermetic, mixed signal packages,

and strip style interconnects. Each prod-

uct has unique mechanical engagement

and locking mechanisms to meet the

demands of harsh environment applica-

tions. These products include our Centi

Line .100-inch and .075-inch center

spacing, the Microline .050 inch center

spacing, and our Nano line of .025-inch

center contact spacing. All of ITT’smicro

connectors utilize our twist pin contact

system, developed by ITT in the early

1960’s. A separate section describes in

detail the twist pin electrical contact

technology (refer to page 6).

The Standard of Six Sigma

When you specify a

Cannon microminiature

connector, you can rely on

aproduct designed,

developed, and manufac-

tured to the highest quali-

ty and reliability standards

in the industry. This tradi-

tion of excellence is

based on ITT’s corporate

culture of operating its

entire business under the

principles

of Six Sigma. At ITT, Six

Sigma is not just a quality

philosophy but a com-

plete corporate culture

that drives the entire busi-

ness. Our Value Based

Management and Value Based Product

Development systems aretwo corner-

stones of ITT that allows for the develop-

ment of both leadership and product

development principles, ensuring that the

correct industry leading products are

developed to the accepted market driven

lead times. These principles have

allowed ITT to become the market leader

in all of our business portfolios.

Six Sigma Engineering

ITT, utilizing its six sigma tools and mul-

tiple lean initiatives, offers the most

experienced engineering design team in

the micro miniature interconnect field.

Using our systems approach, ITT contin-

ues to advance new interconnect tech-

nologies by developing advanced prod-

ucts including higher density Nano

0.025-inch spacing interconnects, Chip-

on-Flex filter connectors, flexible high

density circuits terminated directly to ITT

contacts, and innovative high speed

mixed signal connector configurations.

In conjunction

with our design

teams, ITT

operates a

world class test

lab offering

state of the art

capabilities in electronic, fiber optic, and

mechanical test expertise . Our certified

test engineers and technicians can

develop a specific test plan based on

our customer’s specific needs.

Additionally, our team is experienced in

providing test services and programs for

US DOD Defense electronics and Space

related programs.

Six Sigma Manufacturing

ITT operates manufacturing facilities in

the United States, France, Germany,

Italy, Mexico, China, and the UK, all of

Cannon Microminiature Products

www.ittcannon.com

which have particular prod-

uct area strengths allowing

ITT to offer a truly global

footprint to our customers.

Our facilities are world class

and accommodate full verti-

cal integration with the latest

manufacturing technologies

including: automated and

robotic machining centers,

Super Market manufacturing

cells, Kanban pull systems,

and automated electrical,

mechanical, and optical test and inspection equipment. The

combination of our manufacturing strength and our advanced

manufacturing facilities allows ITT to offer products at market

driven prices. Our capabilities, especially in robotics, comput-

erized precision tooling, Kaizen Project Management, Six

Sigma tools, and test labs, gives ITT the most optimized global

manufacturing footprint in the interconnect industry.

The Custom Difference

As the industry leader in harsh

environment interconnect appli-

cations, ITT’s world class engi-

neering teams will work directly

with our customers to design and develop cost effective solu-

tions for their applications . In many cases we may modify

one of our standarddesigns to ensure a highly reliable solu-

tion wheretiming is critical. Yet, in those cases whereacom-

plete custom interconnect solution is required, ITT will work

with our customer’sEngineers to design an interconnect solu-

tion which will be cost effective yet highly reliable. As profes-

sional consultants, our Engineering teams will provide a thor-

ough systems and mechanical analysis of any proposed solu-

tion. These analyses provide our customers with sophisticat-

ed electrical signal and mechanical charac-

terizations to determine the best solution for

their application.

In addition to custom

connectors, ITT offers

sophisticated custom

cable assembly capa-

bilities for a wide

range of harsh envi-

ronment applications.

Our in house expert-

ise translates to our ability to integrate differ-

ent technologies within a custom cable har-

ness. ITT's capabilities include discrete wire terminations to

multi wire cable harnesses with multiple connector configura-

tions as part of the final assembly. We also specialize in pro-

viding terminated flex circuit assemblies,

high temperature geophysical cable

assemblies, innovative medical electron-

ics cable assemblies, over mold strain

relief systems, and EMI shielded termina-

tions.

RoHS Compliance Information

ITT has implemented a strict

parts control plan for all ITT

electronics plants worldwide

that allows the Cannon Microminiature

connector product portfolio to meet the requirements of

European Union Directive 2002/95/EC better know as the

Reduction of Hazardous Substances initiative. To make things

easier for our customers, all Cannon Microminiature products

can be ordered with an R prefix number which insures our

customers will receive RoHS compliant parts for their commer-

cial electronics applications and equipment. Since most RoHS

hazardous substances center around specific metal plating

and lead solder coatings, ITT's products for RoHS compliance

are available in the following plating finishes: electroless nickel,

stainless steel, Anodize over aluminum and Gold plating. It

should be noted that gold plating

would be recommended as the

replacement for tin-lead solder

when ordering board mount con-

nectors.

Non Compliant RoHS Materials

Advanced Aerospace specifications and DOD system per-

formance requirements demand the necessity to maintain

production status for the primary base metals and Chem film

coatings typically utilized in Aerospace electronics. Thus, in

order to support ITT's Aerospace customer base and maintain

our leadership position

in micro miniature con-

nector technologies,

ITT will continue to

provide interconnect

products with cadmium

plating and tin lead

solder in support of

these markets. These

materials are designed

to be comparable to

M83513.

Please consult Customer Service if RoHS part verification is

required.

www.ittcannon.com

Cannon Microminiature Products

www.ittcannon.com

Table of Contents

Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Microminiature Product Overview Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Twist Pin Contact System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Micro-D Metal Shell - .050" Contact Spacing (MDM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Micro-D PCB - .050" Contact Spacing (MDM-PCB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Micro-D Coaxial/Power - .050" Contact Spacing (MDM-C/P). . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Hermetic (MDMH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Filter (TMDM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Micro-D Plastic Shell - .050" Contact Spacing (MD/MDV) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Micro Center Jackscrew (MJS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Microminiature Circular - .050" Contact Spacing (MIK, MIKM, MIKQ) . . . . . . . . . . . . . . . . . . . . 44

Microstrips .050" Contact Spacing (MT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

MicrominiatureStrip - .100/.050" Contact Spacing (MT)...............................52

Micro Edgeboard - .050" Contact Spacing (MEB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

The Centi Line - .075" Contact Spacing (2D). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Centi-D Loc-.075" Contact Spacing (CDL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Strip Connectors - .100"/.075" Contact Spacing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

The NANO Line - .025" Contact Spacing ..........................................70

Strip Connectors - .025" Contact Spacing (NT)......................................71

NANO D Metal Shell - .025" Contact Spacing (NDM) .................................72

Center Jackscrew - .030" Contact Spacing (NJS). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Custom Cable Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Flex Circuit Cable Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Custom Back Shells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Appendix

StandardWire Termination “L” Code Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

StandardWire Termination “H” Code Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Wire Color Code Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Terminology ..............................................................84

Product Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Cannon Microminiature Product Overview Guide

MDM MDM PCB MDM

C/P

MDMH

Hermetics

TMDM

Filter

MD** MDB

Coaxial

MJS MIK MIKM

Type Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket

Current Rating 3A max. 3A max. 3A max. 3A max. 3A max. 3A max. 3A max. 3A max. 3A max. 3A max.

Contact

Resistance

8milliohms max. 8 milliohms max. 8 milliohms max. 24 milliohms max. 15 milliohms max. 8 milliohms max. 8 milliohms max.

(signal)

8milliohms max. 8 milliohms max. 8 milliohms max.

Contact

Material

gold plated

copper alloy

gold plated

copper alloy

gold plated

copper alloy

gold plated

copper and steel

gold plated

copper alloy

gold plated

copper alloy

gold plated

copper alloy

gold plated

copper alloy

gold plated

copper alloy

gold plated

copper alloy

Shell Metal Metal Metal Metal Metal Plastic Plastic Plastic Plastic Metal

Shell Material Aluminum Aluminum Aluminum Steel Aluminum Thermoplastic

&Thermoset

Thermoset Thermoplastic

&Thermoset

Thermoplastic Steel

Available

Layouts

9, 15, 21, 25, 31,

37, 51 & 100

9, 15, 21, 25, 31,

37, 51 & 100

7C/P2, 24C/P4,

27C/P5 &

10C/P10

9, 15, 21, 25, 31,

37 & 51

9, 15, 21, 25, 31,

37 & 51

9, 15, 21, 25, 31,

37 & 51

7C/P2

10, 26, 51 & 66 -

Rect/unshrouded

16, 28 & 35 -

Rect/shrouded 26,

38, 42 & 76 -

Polarized D

7&55 7, 55 & 85

Configuration Polarized D Polarized D Polarized D Polarized D Polarized D Polarized D Polarized D Rectangular &

Polarized D

Circular Circular

RoHS Available Available Available Available No Available Available Available Available Available

Factory

Terminated

Yes* Yes Yes Yes* Yes Yes* Yes Yes* Yes Yes

Space

Applications

Available Available Available Yes Yes Available Available Available Yes Yes

Page Number 7 18 22 23 25 28 32 39 44 44

*Solderpot versions available for end user termination

MIKQ MT* MEB 2D CDL CTA* NDM NTP NJS

Type Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket Plug and Socket

Current Rating 3A max. 3A max. 3A max. 5A max. 5A max. 5A max. 1A max. 1A max. 1A max.

Contact

Resistance

8milliohms max. 8 milliohms max. 8 milliohms max. 9 milliohms max. 9 milliohms max. 9 milliohms max. 60 milliohms max. 60 milliohms max. 60 milliohms max.

Contact Material gold plated

copper alloy

gold plated

copper alloy

gold plated

copper alloy

gold plated

copper alloy

gold plated

copper alloy

gold plated

copper alloy

precious metal

alloy & gold plated

copper alloy

precious metal

alloy & gold plated

copper alloy

precious metal

alloy & gold plated

copper alloy

Shell Metal Plastic Plastic Plastic Plastic Plastic Metal Plastic Plastic

Shell Material Steel Thermoplastic Thermoset Thermoplastic Thermoplastic Thermoplastic Thermoset Thermoset Thermoplastic

Available

Layouts

7, 19 & 37 MTV - 1 thru 120

MTB - 1 thru 80

64, 128, 92

& 184

19, 31, 52, 79

& 100

139 CTA3 - 1

thru 53

CTA4 - 1

thru 60

9, 15, 21, 25,

31 & 37

1thru 40 Rectangular -

9, 24 & 44

Circular - 27,

72 & 246

Configuration Circular Strip Polarized D Polarized D Polarized D Strip Polarized D Strip Rectangular &

Circular

RoHS Available Available Available Available Yes Yes Yes Yes Yes

Factory

Terminated

Yes Yes* Yes* No No No Yes Yes Yes

Space

Applications

Yes Yes Yes No No No Yes Yes Yes

Page Number 44 48 54 59 65 66 72 71 73

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Micro Twist Pin Cannon Microminiature Products

SLEEVE

WIRE

WIRE CRIMP

CRIMP

AREA

WELDED TIP

Cannon

MICROPIN

Pos-A-Line Contact Alignment

The flexible twist-pin is recessed into the insulator and the rigid socket is

exposed, reversing the traditional positions of pin and socket. During mating, the

socket is guided into the pin insulator by the lead-in chamfer. The pin is kept

from flexing beyond the socket capture radius by the walls of the cavity. The

hemispherical weld of controlled radius at the tip of the pin combines with the

lead-in chamfers of the socket contact and the pin insulator to carn the pin into

alignment. By controlling the welding process and the dimensions of the socket

contact and the insulators, it is impossible for the recessed pin to escape the

socket capture radius.

NORMAL MATING

CONDITIONS

SEVERE MISALIGNMENT

TWIST PIN CONTACTS WILL MATE

EVEN UNDER SEVERE MISALIGNMENT

Figure 1

Figure 2

Twist Pin Contact Technology

The foundation of ITT’sCannon MicroConnector portfolio

starts with ITT’s innovative twist pin contact system. This sys-

tem was originally developed in the early 1960’s and ITT was

one of the original interconnect companies to license this

technology and improve it. Our forty five years of experience

in manufacturing and establishing a fully automated manufac-

turing system for this contact has truly given ITT the foremost

knowledge in twist pin contact technology.

As the core of our micro products, the twist pin contact offers

asuperior electrical and mechanical system that outperforms

traditional machined or stamped electrical contract systems.

ITT’stwist pin system consists of the MicroSocket and the

Micro pin or Twist pin. Figure I show the basic contacts.

Figure 1

The twist pin contact system consists of several stranded

cores making up the wire bundle. The strands are subse-

quently heat treated and a weld is performed on the tip of

each contact. Crimp sleeves are then inserted over the con-

tact and crimp areas are defined to produce a seamless crimp

system. The entire twist pin system is referred by ITT as a

Pos-A-Line contact alignment system. Our reference to this

system identifies that the flexible twist pin is recessed into the

insulator and the rigid socket is exposed thus reversing the

traditional positions of the pin and socket. During the mating

sequence, the socket is guided into the pin insulator by the

lead-in chamfer. The pin is kept from flexing beyond the sock-

et capture radius by the walls of the cavity. The hemispherical

weld of controlled radius at the tip of the pin combines with

the lead-in chamfer of the socket contact and the pin insula-

tor to cam the pin in alignment. ITT has developed a very

robust Six Sigma manufacturing process that controls the

welding process as well as the dimensions of the socket con-

tact and insulator material. The net result is a contact system

that makes it impossible for the recessed pin to escape the

socket capture radius. Figure 2 shows the twist pin features

as well as mating and severe misalignment conditions.

The advantages of ITT’stwist pin contact system are many

and have been field proven in the most demanding applica-

tions and environments for over forty five years. Some of

these advantages include:

• Seven points of electrical contact (Micro0.050-inc & Centi

Line 0.075-inch Interconnect Products)

• Five points of electrical contact (Nano 0.025-inch

Interconnect Products)

• Contact and crimp sleeve materials carefully optimized for

extremely reliable crimps- No design tradeoffs

• Seamless crimp sleeves

• Multiple 4-indent wire crimps standard and smaller bore

micro socket contacts

• Standard integral tail & thru bundle micro pin contacts (high

density packaging)

• High mating cycles

• High current handling capabilities

• System qualification in numerous Aerospace, Defense

Electronic, and high temperatureGeophysical applications.

• Wide array of wire terminations

The advantages listed above areby no means inclusive of

ITT’s innovative product improvement processes. Moving for-

ward, ITT plans to introduce additional new product features

supporting enhanced twist pin contact performance.

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Micro-D Metal Shell - .050" Contact Spacing MDM

MDM connectors are used in applications

requiring highly reliable, extremely small, light-

weight connectors with higher density contact

configurations than available in traditional rec-

tangular connectors. They are available in 8

shell sizes accommodating from 9 to 100 con-

tacts, and special arrangements of power and

coaxial contacts.

These connectors are designed to meet the rap-

idly increasing demands for an environmental,

high performance, rugged, moisture-sealed

microminiature connector. This connector

employs size 24 MICROPINTM/MICROSOCKETTM

contacts on .050 (1.27) centers in a contact

density identical to the standard MICRO-D con-

nector series, but with these additional features:

•Aluminum shells to provide greater

strength, prevent chipping, cracking or

breaking, offer electromagnetic (EMI) and

RFI shielding.

•Silicone elastomer compression interfacial

seal to provide a moisture and humidity

seal between each contact and between

contacts and shell.

Specifications

STANDARD MATERIALS AND FINISHES

Shell

Insulator

Contacts

Mounting Hardware

Kit, Jackpost (3) items

Washer

Standard Epoxy

- 6061-T6 Aluminum alloy per

QQ-A-200/8, yellow chromate/

cadmium, Type II, Class 3 over

electroless nickel per SAE

AMS-C-26074, Class 4.

-Liquid Crystal Polymer per MIL-M-24519,

Type GLCP-30F (9-100)

- Glass filled diallyl phthalate per

MIL-M-14, Type SDGF (7*2 and 24*4)

- Polyphenylene sulfide per

MIL-M-24519, Type GST-40F (16*5)

- Polyester per MIL-M-24519, Type

GPT-30F (10*10)

- Copper alloy, gold plate

- 300 Series stainless steel, passivate

- 400 Series stainless stell, passivate

-Hysol EE4215/HD3561, color black

or Hysol EE4198/HD3561, color green

Coupling

Polarization

Contact Spacing

Centers

Shell Styles

No. of Contacts

Coaxial Cable

Wire Size

Contact Termination

- Friction/jackscrews

- Keystone-shaped shells

- .050 (1.27)

- Plug and receptacle

- 9 thru 100 signal;

5 signal/2 coaxial;

5 signal/2 power;

11 signal/5 coaxial;

11 signal/5 power;

0 signal/10 coaxial;

0 signal/10 power;

20 signal/4 coaxial;

20 signal/4 power

- RG - 178/U

- #24 thru #32 AWG

- Multiple indent crimp

MECHANICAL FEATURES

Performance Data

The table below summarizes the results of key tests performed in accordance with MIL-STD-1344, where

applicable. Data is applicable to standard connectors with standard termination. Variations may affect this

data, so please consult customer service for further information on your requirements.

Tes t

Dielectric Withstanding

Voltage

Method 3001:

Insulation Resistance Method 3003

600 VAC at sea level

150 VAC at 70,00' altitude

No breakdown

5,000 megohms minimum

No physical damage

No loss of continuity >1µsec

No physical damage

No loss of continuity >1µsec

No mechanical or electrical defects

Insulation resistance >100 megohms

Shall be capable of matingand unmating,

and meet contact resistance requirements

8milliohms maximum

10milliohms maximum

5lb. minimum axial load

-55˚C to +125˚C

50 G's, 3 axes, 6millisecond

duration sawtooth pulse

20 G's, 10-2,000 Hz. 12hrs

48hours

At 3 amps

At 1 milliamp

Thermal Shock Method 1003. Condition A:

Physical Shock Method 2004, Condition E:

Vibration Method 2005,Condition IV:

Durability 500 cycles of matingand

unmating,500 CPH max.

Moisture Resistance Method 1002, Type II, omit steps 7a& 7b

Salt Spray Method 1001, Condition B:

Contact Resistance

(MIL-STD-202)

Method 1001, Condition B:

Contact Retention

Per 83513-Style

Method Criteria of Acceptance

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Micro-D Metal Shell - .050" Contact Spacing MDM

How to Order

For 83513-Style ordering information see pages 16 and 17

SERIES

RoHS COMPLIANCE

MDM 51 P H 001 P XXX- -

SERIES

CONTACT ARRANGEMENTS

CONTACT TYPE

TERMINATION TYPE

CONTACT ARRANGEMENTS

CONTACT TYPE

TERMINATION TYPE

TERMINATION CODE

TERMINATION CODE*

HARDWARE

MDM: (Size 9-100) Liquid Crystal Polymer (LCP)

MDM: (Combo Layout) Diallyl Phthalate (DAP)

(H) 001 - 18",7/34 strand,#26 AWG,

MIL-W-16878/4, Type E Teflon, yellow.

(H) 003 - 18", 7/34 strand, #26 AWG,

MIL-W-16878/4, Type E Teflon,

color coded to MIL-STD-681 System I.

M - Military specification hardware, see

page 11 for military hardware codes.

P - Jackpost

K - Jackscrew-standard profile

L - Jackscrew-low profile

F - Float mount

B - No hardware standard

.091 (2.31) dia. hole for sizes 9-51;

.120 (3.05) dia. hole for size 100.

A - .125 (3.18) dia. mounting holes for sizes 9-51;

.166 (4.22) dia. hole for size 100.

B1 - .1475 (3.75) dia. hole for size 100

(Per 83513-Style)

No Number - (Standard cadmium/yellow

chromate over nickel

A174 - Electroless nickel

A172 - Gold over nickel

A141 - Irridite/alodine

A30 - Black anodize

*See page 79 and 81 for additional Termination codes.

9-15-21-25-31-37-51-100 (standard)

16C5, 10C10, 7C2, 24C4 (coaxial)

16P5, 10P10, 7P2, 24P4 (power)

P - Pin S - Socket

H - Harness-insulated wire.

L - Solid-uninsulated wire.

S - Solder pot to accept #26 AWG MAX.

harness wire. (Not available with power

contact arrangements.)

or combination of

coax and power

SHELL FINISH MOD CODES

HARDWARE

SHELL FINISH MOD CODES

}

(L) 1 - 1/2" uninsulated solid #25

AWG gold plated copper.

(L) 2 - 1" uninsulated solid #25 AWG

gold plated copper.

Micro-D Metal Shell - .050" Contact Spacing MDM

COTS or Non Mil-Spec or Commercial or Industrial Standard Wire Termination Codes

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Harness Type (H) Solid Uninsulated Type (L)

Length

3(76.2)

6 (152.4)

8 (203.2)

10 (254.0)

12 (304.8)

18 (457.2)

20 (508.0)

24 (609.6)

30 (762.0)

36 (914.4)

48 (1219.2)

72 (1828.8)

120 (3048.0)

* Cavity #1 black

H020

H019

H026

H029

H028

H001

H038

H009

H010

H011

H013

H017

H042

H027

H016

H034

H025

H002

H003

H023

H004

H005

H006

H048

H046

H041

L61

L56

L57

L39

L58

L14

L16

L10

.125 (3.18)

.150 (3.81)

.190 (4.83)

.250 (6.35)

.375 (9.52)

.500 (12.70)

.750 (19.05)

1.000 (25.40)

1.500 (38.10)

2.000 (50.80)

2.500 (63.50)

3.000 (76.20)

#26 AWG per MIL-W-16878/4, 7/34 strand, type E Teflon, stranded. #25 AWG gold plated copper

All Yellow Color Coded* Termination Code Length

The following termination codes are listed for your information. For additional codes please refer

to Appendix on page 79 and 81. All wire lengths are minimum.

Cannon Modification Code (Not MS)

Contact Arrangements

(Face View of Pin insert - Use Reverse Order for Socket Side)

Standard

9 Contacts

1 2 3 4 5 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 10 11

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

1 2 3 4 5 6 7 8 9 10 11 12 13

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

A1 A1 A2 A3 A4

1234567

8 9 10 11 12 13

14 15 16 17 18 19 20

123

36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

17 18 19 20 21 22 23 24 25 26 27 28 29 30 3114 15 16 17 18 19 20 21 22 23 24 25

19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

9 10 11 12 13 14 15 12 13 14 15 16 17 18 19 20 21

6 7 8 9

15 Contacts 21 Contacts

37 Contacts31 Contacts25 Contacts

51 Contacts

Coaxial

Size 51 Shell

20 Micro contacts

4 Coax or 4 Power

(Not MS)

Size 25 Shell

5 Micro contact

2 Coax or 2 Power

.320

(8.13)

A2A1 A3 A4 A5

567

910118

23 41

Size 51 Shell

11 Micro contact

5 Coax or 5 Power

.714 (18.14)

.460 (11.68)

.007

(0.18)

.043

(1.09)

100 Contacts

Contact identification numbers are for reference only and do not appear on insulator or connector body.

.103

.025

(0.64)

TYP.

.050

(1.27)

TYP.

Size 100 Shell

0 Micro contact

10 Coax or 10 Power

A2A1 A3 A4 A5

A7A6 A8 A9 A10

Micro-D Metal Shell - .050" Contact Spacing MDM

COTS or Non Mil-Spec or Commercial or Industrial Shell Dimensions (Conforms to 83513-Style)

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Plug

Receptacle

Receptacle (MDM-100 only)

Solder Pot

Pigtail termination

.110 (2.79)

MAX.

.110 (2.79)

MAX.

.200 (5.08)

MAX.

.200 (5.08)

MAX.

TWO MTG. HOLES

.091 ±.003(2.31 ±0.08)

TWO MTG. HOLES

.091 ±.003(2.31 ±0.08)

TWO MTG. HOLES

.120 ±.003(3.05 ±0.08)

.284 (7.21)

MAX.

.296 (7.52)

MAX.

.416 (10.57)

MAX.

.429 (10.09)

MAX.

.429 (10.90)

MAX. .198 (5.03)

MAX.

.296 (7.52)

MAX.

.394 (10.01)

MAX.

.186 (4.72)

MAX. .093

(2.36)

REF.

.093

(2.36)

REF.

.093 (2.36)

REF.

.198 (5.03)

MAX.

Part Number

By Shell Size

MDM-9P*

MDM-9S*

MDM-15P*

MDM-15S*

MDM-21P*

MDM-25P*

MDM-25S*

MDM-31P*

MDM-31S*

MDM-37P*

MDM-37S*

MDM-51P*

MDM-51S*

MDM-100P*

MDM-100S*

.785 (19.94)

.935 (23.75)

1.085 (27.56)

1.185 (30.10)

1.335 (33.91)

1.485 (37.72)

1.435 (36.45)

2.170 (55.12)

.334 (8.48)

.402 (10.21)

.484 (12.29)

.552 (13.97)

.634 (16.10)

.702 (17.83)

.734 (18.64)

.802 (20.37)

.884 (22.45)

.952 (24.18)

1.034 (26.26)

1.102 (27.99)

.984 (24.99)

1.052 (26.72)

1.384 (35.15)

1.508 (38.10)

*Add lead type and length; see How To Order. ***Weight given is 1/2", uninsulated, solid, #25 AWG gold plated copper pigtails.

.400 (10.16)

.550 (13.97)

.700 (17.78)

.800 (20.32)

.950 (24.13)

1.100 (27.94)

1.050 (26.67)

1.442 (36.63)

.270 (6.86)

.310 (7.87)

.360 (9.14)

.308 (7.82)

.351 (8.92)

.394 (10.01)

.565 (14.35)

.715 (18.16)

.865 (21.97)

.965 (24.51)

1.115 (28.32)

1.265 (32.13)

1.215 (30.86)

1.800 (45.72)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.228 (5.79)

.296 (7.52)

.271 (6.88)

.394 (10.01)

.063 (1.79)

.084 (2.39)

.083 (2.37)

.105 (2.99)

.104 (2.97)

.119 (3.39)

.118 (3.36)

.140 (3.99)

.139 (3.96)

.161 (4.59)

.160 (4.56)

.193 (5.50)

.188 (5.35)

.500 (14.3)

1.040 (29.5)

Max.

+_.005

(0.13)

Max.

Average Weights**

oz. (gm.) ±5%

Panel Mounting Dimensions (Sizes 9 - 100)

.200 ±.005

(5.08 ±0.13)

Plug and Receptacle

Rear Mounted

Plug and Receptacle

Front Mounted

Plug Front Mounted

Receptacle Rear Mounted

.395 ±.005

(10.03 ±0.13)

.300 ±.005

(7.62 ±0.13)

Micro-D Metal Shell - .050" Contact Spacing MDM

Panel Cutouts

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

++ ++

Shell Sizes 9 thru 51

Shell Size 100

Figure 1

Front Mounting

TYP. D

TYP.

.100

(2.54)

R TYP.

.450±.002

(11.43±0.05)

FULL R.

(TYP. )

.030 (0.76) TYP.

PANEL REF.

)

.118

(3.00

1.805

(45.85

.015 (0.38)

R. MAX (TYP. )

FULL R. (TYP. ) FULL R. (TYP. ) FULL R. (TYP. ) PANEL REF.

)

.118

(3.00 )

.118

(3.00 )

)

+.005

-.000 1.805

(45.85 )

1.805

(45.85 )

.125

(3.18 )

1.456

(36.98 )

+0.10

-0.00

.361

(9.17 )

1.520

(38.61 )

.401

(10.18

.450+_.002

(11.43+_0.05) .030

(0.76) TYP.

)

.015 (0.38)R.

MAX.(TYP)

FULL R.

(TYP. )

FULL R. (TYP. )

26˚/27˚TYP

Figure 2

Rear Mounting

Figure 3

EdgeboardMounting

Figure 1

Front Mounting

Figure 2

Rear Mounting

Figure 3

EdgeboardMounting

NOTE: See page 13 for rear panel mounting configuration.

+0.13

-0.00

+.005

-.000

+0.13

-0.00

+.004

-.000

+0.10

-0.00

+.004

-.000

+.005

-.000

+0.13

-0.00

+0.10

-0.00

+.004

-.000

+0.10

-0.00

+.004

-.000

+.005

-.000

+0.13

-0.00

+.005

-.000

+0.13

-0.00

+.005

-.000

+0.13

-0.00

+.005

-.000

+0.13

-0.00

Shell

Size

Cutout

Figure

.408

.401

.558

.551

.708

.701

.808

.801

.958

.951

1.108

1.101

1.058

1.051

.271

.252

.271

.252

.271

.252

.271

.252

.271

.252

.271

.252

.315

.295

.570

.720

.870

.970

1.120

1.270

1.220

.089

+.004

-.000

+.004

-.000

+.005

-.000

+.005

-.000

For 9-51 Shell Sizes

NOTES:

1. Front panel mounting is the preferred mounting

method. Front panel mounting dimensions

(figure1) will accommodate either #2-56 screws

or jackpost hardware.

2. Rear panel mount dimensions (figure 2) will

accommodate #2-56 screw hardwareonly.

When mounting the connector with rear panel

mount jackpost see the panel cut-out

dimensions.

3. Edgeboardmounting bracket (figure 3) uses #2-

56 screws. Dimension .450+/-.002 (11.43+/-

0.05) locates the MDM receptacle flush with the

end of the board.

For 100 Shell Size

NOTES:

1. Front mounting is the preferred mounting

method. Front panel mounting dimensions

(figure1) will accommodate either #4-40 screws

or jackpost hardware.

2. Rear panel mount dimensions (figure2) will

accommodate #4-40 screw hardware only see

the panel cut-out dimensions.

3.Edgeboardmounting bracket (figure3) uses #4-

40 screws. Dimension .450+/-.002 (11.43+/-

0.05) locates the MDM receptacle flush with the

end of the board.

Micro-D Metal Shell - .050" Contact Spacing MDM

Mounting Hardware Views (for sizes 9-51)

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Screw Lock Assembly

90˚ Angle Mounting

Bracket

Screw Lock Assembly*

*NOTE Torque value is 2.5 in/lbs max.

Jackpost - (P)

90˚ Angle Mounting Bracket

This hardware supplied unassembled.

.052

(1.32) TYP.

.260

(6.60) MAX.

#2-56

UNC-2B

THD

.178 ± .005

(4.52 ± 0.13)

.096 ± .005

(2.44 ± 0.13)DIA.

.093 (2.36)

RECOMMENDED

PANEL THICKNESS

BUSHING

.182 (4.62)

MAX. .688 (17.48)

MAX.

.408 (10.36)

MAX.

RETAINING

CLIP

LOCK

SCREW

MATING

FACE

CONNECTOR

SHOWN FOR

REF. ONLY

#2-56 UNC-2B

.185 (4.70) MAX.

.500

(12.7)

MAX.

PANEL REF.

.232 (5.89) MAX.

#2-56 UNC-2A

.170

(4.32) MAX.

Description

Screw Lock Assembly

Jackpost kit

Mounting Bracket 90˚ MDM

for 9 thru 37 Shell Sizes

Mounting Bracket 90˚ MDM

for 51 Shell Size

NOTES: Screw lock assembly (322-9500-000) can be used for front mounting only. Jackpost kit

(320-9505-000) consists of two assmblies, shipped unassmbled.

322-9500-000

320-9505-000

015-9516-002

015-9516-003

.147 (3.73)

.169 (4.29)

.308 (7.82)

.350 (8.89)

N/A

Part Number

+/-.005 (±0.13)

Max.

Jackpost Bushing (for rear panel mounting-for sizes 9-51)

3/32 (2.4)

1/16 (1.6)

3/64 (1.2)

1/32 (0.8)

*A kit consists of 2 jackpost, 2 nuts, 2 washers.

.087 (2.21)

.056 (1.42)

.042 (1.07)

.025 (0.64)

320-9505-007

320-9505-006

320-9505-005

320-9505-004

Panel A

Thickness

Jackpost Kit

Number*

.401 (10.19)

.551 (14.00)

.701 (17.81)

.801 (20.34)

.951 (24.16)

1.101 (27.97)

1.051 (26.70)

.252 (6.40)

.295 (7.49)

.565 (14.35)

.715 (18.16)

.865 (21.97)

.965 (24.51)

1.115 (28.34)

1.265 (32.13)

1.215 (30.86)

Shell

Size

Plugand Receptacle Dimensions

Jackpost diameter within the "A"

dimension is .124/.120 (3.15/3.05).

HEX IS .135 (3.43)/.115 (2.92) ACROSS FLATS

#2-56 UNC-2B THD

MATING FACE

.170 (4.32)

.185 (4.70)

.500 (12.7)

.480 (12.19)

#2-56 UNC

2A THD

.126 (3.20)

.125 (3.18)

DIA. TYP

.105 (2.67)

.100 (2.54)

R TYP.

27˚

26˚ TYP

+.004 (0.10)

-.000 (0.00)

+.004 (0.10)

-.000 (0.00)

+_.005(0.13)

+.005(0.13)

-.000 (0.00)

Micro-D Metal Shell - .050" Contact Spacing MDM

Mounting Hardware Views (sizes 9-51)

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

This hardware is factory installed.

.014 ± .004

(0.36 ± 0.10) ALLOWABLE

DIAMETRAL FLOAT

.020 (0.51) MAX. ALLOWABLE

AXIAL FLOAT

.150 ± .003

(3.81 ± .076)

.185 (4.70)

MAX .093

(2.36)

REF.

.090 ± .0015

(2.29 ± 0.038)DIA .031 ± .003

(0.79 ± 0.08)

MATING

FACE

MATING

FACE

#2-56

UNC-2A

.490

(12.45) MAX

.735 (18.67)

MAX.

MATING

FACE

CONNECTOR

SHOWN FOR

REF ONLY

HEX HEAD -

.050 (1.27) ACROSS FLATS

.050 (1.27) DEEP (REF)

.155

(3.94) MAX.

PART HAS A .040 (1.02)

MAX. AXIAL FLOAT

#2-56 UNC-2A

Jackscrew - (L) Low ProfileJackscrew - (K) Standard ProfileFloat Mount - (F)

Shown here is a cutaway view of the float mount for the MDM connector. The basic shell dimensions

are the same for the float mount and the screw mounting hole configurations. View shown is for standard

float mount front panel mounting. Reverse mounting is available on request.

* NOTE: Torque values are as follows:

Low Profile Jackscrew (L)-2.5 in-lbs

Standard Jackscrew (K)-2.5 in-lbs

PART HAS A .040 (1.02)

MAX AXIAL FLOAT

CONNECTOR

SHOWN FOR

REF. ONLY

Mounting Hardware to Military Specification (for sizes 9 - 100) per 83513/5-Style

This hardware supplied in kits unassembled (2 pieces of each item).

#2-56 UNC-2A

THREAD TYP.

PLUG (REF. WITH

.092 (2.34) DIA.

MOUNTING HOLES

POTTING WELL (REF.)

.361 (9.17) MAX.

.390 (9.91) MAX.

SIZE 100 ONLY

.010 (0.25)

TH'K (REF.)

.062 (1.57)

HEX. (REF.)

.868 (22.05) MAX.

.902 (22.91) MAX.

.010 (0.25)

TH'K (REF.)

#2-56 UNC-2A

THREAD TYP.

PLUG (REF.) WITH

.092 (2.34) DIA.

MOUNTING HOLES

POTTING WELL

(REF.)

Figure 1. Jackscrew - Low profile

Slotted Head

Size 9-51

Size 100*

Allen head

Optional Head Configuration

Plug and Receptacle

Low and High Profile

Size 9-51

Size 100* (same dimensions)

Figure 2. Jackscrew - High Profile

Slotted Head

Size 9-51

Size 100*

To order hardware kits separately, order either by M83513/5-Style** or by 320-950X-XXX.

Description

Slotted Head Jackscrew Assy Low Profile (Figure 1) M5 320-9508-025

M6 320-9508-027

M2 320-9508-026

M3 320-9508-028

M7 320-9505-033

M15 320-9508-021

M16 320-9508-023

M12 320-9508-022

M13 320-9508-024

M17 320-9505-030

*Size 100 requires B1 size mounting holes for Mil-Spec hardware

Note: Torque values as follows:

Size 9-51 4.0 in-lbs

Size 100 6.0 in-lbs

Slotted Head Jackscrew Assy Low Profile (Figure 2)

Allen Head Jackscrew Assy Low Profile (Figure 1)

Allen Head Jackscrew Assy High Profile (Figure 2)

Jackpost Assy (Figure 3)

Size 9-51

Mod Code Part Number Size 100*

Mod Code Part Number

*** *

.125 (3.18) HEX.

.187 (4.75) HEX.

#2-56 UNC-2B THREAD

#4-40 UNC -2A THREAD

LOCKWASHER

RETAINING NUT

.154 (3.91) HEX.

.187 (4.75) HEX.

.062 ± .010

(.157 ± 0.25)

SIZE 100 SAME

.475 ± .025

(12.06 ± 0.64)

SIZE 100 SAME

.190/.185(4.83/4.70)

.185/.175(4.70/4.44)

Figure 3. Jackpost Assembly

Size 9-51

Size 100*

Micro-D Metal Shell - .050" Contact Spacing MDM

Mounting Hardware Views (for size 100)

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

This hardware supplied unassembled.

#4-40 UNC-2A THD

#4-40 UNC-2B NOTHING OR FEMALE THD

.185 (4.70)

MAX.

.500 (12.70)

MAX.

PANEL -

MAY BE USED WITH

.093 (2.36) MAX

THICK PANEL

.123 ± .005

(3.12 ± 0.13) DIA.

#4-40 UNC-2B

THD

.395 (10.03)

MAX.

.235 ± .005

(5.97 ± 0.13)

.064 ± .010

(1.62 ± 0.25) TYP.

180

(4.57 )

+.010

-.005

+.025

-0.13

Jackpost - (P)

90˚Angle Mounting

Bracket

90° Angle Mounting

Bracket

Description

Jackpost kit

Mounting Bracket 90˚ MDM

320-9505-015

015-9528-000 .191 (4.85) .370 (9.40)

N/A

Part Number A

± .005 (0.13)

Max.

#4 LOCK WASHER

MATING SIDE

Note: Size 100 requires .120 dia (B) mounting hole

when using Commercial (P) jackpost kits.

MATING

FACE

#4-40

UNC-2A

THD

.735 (18.67)

MAX.

Jackscrew - (K) Standard

PART HAS A .040 (1.02)

MAX AXIAL FLOAT

CONNECTOR

SHOWN FOR

REF. ONLY

This hardware is factory installed.

.014 ± .004

(0.36 ± 0.10) ALLOWABLE

DIAMETRAL FLOAT

.020 (0.51) MAX. ALLOWABLE

AXIAL FLOAT

.174 ± .005

(4.4 ± .10)

.185 (4.70)

MAX .093

(2.36)

REF.

.116 ± .002

(2.29 ± .051)

DIA .031 ± .003

(0.79 ± 0.08)

MATING

FACE

Float Mount - (F) Std.

HEX. SOCKET HEAD.

.078 (1.98) ACROSS FLATS

.050 (1.27) MIN. DEPTH

.155 (3.94) MAX.

.040 (1.02) MAX.

AXIAL FLOAT

#4-40 UNC-2A THD

MATING SIDE

*NOTE: Torque values are as follows:

Low Profile Jackscrew (L)-4.0 in-lbs

Standard Profile Jackscrew (K)-4.0 in-lbs

Jackscrew - (L) (Low Profile)

Jackpost Bushing (for Rear Panel Mounting)

ENGAGING FACE

RECEPTACLE SHOWN

FOR REF. ONLY

#4-40 THREAD

RETAINING NUT

.500 (12.70)

MAX.

.185 (4.70)

.170 (4.32)

#4-40 UNC-2B

3/16" HEX.

LOCKING POST

.125

(3.18

1.516

(38.51

.401

(10.18

1.800 ± .005

(45.72 ± 0.13)

.161 (4.09)

.159 (4.04) DIA.

)

+.004

-.000

+1.10

-0.00

)

+.004

-.000

+1.10

-0.00

)

+.005

-.000

+0.13

-0.00

Panel

Thickness

Jackpost Kit

Number*

Dimensions for Rear Panel Mounting

+.005 (0.13)

-.000 (0.00)

3/32 (2.4)

1/16 (1.6)

1/32 (0.8)

3/64 (1.2)

*2 jackposts, 2 nuts, 2 washers

.087 (2.21)

.058 (1.42)

.025 (0.64)

.042 (1.07)

320-9505-013

320-9505-012

320-9505-010

320-9505-011

Torque value for size 100

Note: Size 100 requires B mounting hole shell

size when using rear panel mount jackposts

Micro-D Metal Shell - .050" Contact Spacing MDM

Connector Saver

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

.040 (1.02) MAX. ALLOWABLE

AXIAL FLOAT JACKSCREW/JACKPOST BUSHING

(FOR REFERENCE ONLY SEE

ORDERING INFORMATION BELOW.)

MICROSOCKET

CONNECTOR RECEPT

INTERFACIAL SEAL

.185 (4.70) MAX. (TYP. )

E-RING (TYP. )

CONNECTOR, PLUG

BACKPOTTING, EPOXY

.790 (20.07) MAX.

.315

(8.00)

MAX.

.090 (2.29) REF.

(TYP. )

.900 (22.86) REF.

MDM Size 9 Shown

#2-56 UNC-2A THD (9-51)

(TYP. )

MICROPIN

Save wear and tear on your equipment and

systems connectors by using the "Connector

Saver".

The multi-matings and unmatings experienced

by most connectors during testing and final

check out can be eliminated.

Simply mate the "Connectors Saver" to your

unit and use the opposite side for your testing

interface...less wear, less tear, less chance of

damage. It is available in all eight standard

MDM layouts. Mating hardware is available

and can be ordered either separately or

included with the connector saver.

Size

100

MDM98479-86

MDM98479-87

MDM98479-88

MDM98479-89

MDM98479-90

MDM98479-91

MDM98479-92

MDM98479-93

MDM98479-18

MDM98479-19

MDM98479-20

MDM98479-21

MDM98479-14

MDM98479-15

MDM98479-16

MDM98479-17

MDM98479-78

MDM98479-79

MDM98479-80

MDM98479-81

MDM98479-82

MDM98479-83

MDM98479-84

MDM98479-85

MDM-97294-371

MDM-97294-372

MDM-97294-373

MDM-97294-374

MDM-97294-375

MDM-97294-376

MDM-97294-377

MDM-97294-717

320-9505-014**

320-9508-014***

.785 (19.94)

.935 (23.75)

1.085 (27.56)

1.185 (30.10)

1.335 (33.91)

1.485 (37.72)

1.435 (36.45)

2.170 (55.12)

Kit contains 2 jackpost/jackscrew bushings and 2 E-Rings.

Size 9-51-#2-56 UNC-2B Thread

Size 100-#4-40 UNC-2B Thread

***

.565 (14.35)

.715 (18.16)

.865 (21.97)

.965 (24.51)

1.115 (28.32)

1.265 (32.13)

1.215 (30.86)

1.800 (45.72)

.308 (7.82)

.351 (8.91)

.394 (10.01)

With Hardware

Electroless Nickel (A174) Plated Cadmium over Nickel (A101) Plated

W/O Hardware With Hardware W/O Hardware *Hardware Kits A

Max.

± .005 (0.13)

Max.

Micro-D Metal Shell - .050" Contact Spacing 83513-Style

How to Order - 83513-Style Part Number Nomenclature – Slash Sheets 1-9

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

SERIES

Metal Shell, Liquid Crystal Polymer (LCP)

Diallyl Phthalate Insulator

Polyester Insulator

MDM

MDB

MDVB

Plug, Connector, Solderpot

Receptacle, Connector, Solderpot

Plug, Connector, Crimp Type

Receptacle, Connector, Crimp Type

Hardware Only

Plug, Connector, Solderpot

Receptacle, Connector, Solderpot

Plug, Connector, Crimp Type

Receptacle, Connector, Crimp Type

Metal Shell

Plastic

long, #26 AWG per MIL-W-22759/11-26-9 (all white)

long, #26 AWG per MIL-W-22759/11-26

Color Coded per MIL-STD-681, System 1, 10 colors repeating

long, #26 AWG per MIL-W-22759/11-26-

Color Coded per MIL-STD-681, System 1, 10 colors repeating

long. #25 AWG, type S per QQ-W-343,

Gold Plated

long, #25 AWG, type S per QQ-W-343,

Gold Plated

long, #25 AWG, type S per QQ-W-W-343,

Tin Plated

long, #25 AWG, type S per QQ-W-343,

Tin Plated

long, #26 AWG per MIL-W-22759/33-26-9 (all white)

long, #26 AWG per MIL-W-22759/33-26

Color Coded per MIL-STD-681, System 1, 10 colors repeating

long, #26 AWG per MIL-W-22759/33-26

Color Coded per MIL-STD-681, System 1, 10 colors repeating

long, #26 AWG per MIL-W-22759/11-26-9 (all white)

long, #26 AWG per MIL-W-22759/11-26

Color Coded per MIL-STD-681, System 1, 10 colors repeating

long, #26 AWG per MIL-W-22759/33-26-9 (all white)

long, #26 AWG per MIL-W-22759/33-26

Color Coded per MIL-STD-681, System 1, 10 colors repeating

18"

36"

18"

36"

.5"

1.0"

.5"

1.0"

18"

36"

18"

36"

72"

9 Contact

15 Contact

21 Contact

25 Contact

31 Contact

37 Contact

51 Contact

100 Contact

METAL SHELL

No Number - For Solderpot

For every Mil Spec Part Number, ITT has one corresponding

part number shown an example

For space application, connector shell finish must be "A174"

and wire must be per MIL-W-22759/33-26.

Any deviations to these P/N's will result in assignment ofa

special P/N, consult factory.

Size 100 not available in / 06 through / 09. (Plastic shell)

Color coding in accordance with MIL-STD-681, System 1,

no parenthesis. See page 83 for color code chart.

For mounting hardware to Military Specification (sizes 9 to 100)

see page 13.

No number - for plastic type connector

C– for Cadmium/Yellow chromate over nickel

N–A174 - Electroless Nickel A174

Tolerance on wire lengths:18", 36" and 72" long —

+1.00"/-0.00"

.5" and 1.00" —+.200"/-.000"

PLASTIC

9 Contact

15 Contact

21 Contact

25 Contact

31 Contact

37 Contact

51 Contact

M83513/ 01*** * * *H100--

83513-Style SLASH SHEET

INSERTARRANGEMENT

WIRE TYPE

SHELL FINISH

NOTES:

236

Micro-D Metal Shell - .050" Contact Spacing 83513-Style

How to Order - 83513-Style Part Number Nomenclature – Slash Sheets 10-27

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

SERIES

Connector, Electrical, Rectangular

Microminiature, Polarized Shell

PC Board Mounting

long, #24 AWG solid copper wire per QQ-W-343, Type “S”, solder dipped

.109"

.140"

.172"

9 Contact

15 Contact

21 Contact

25 Contact

31 Contact

37 Contact

51 Contact

100 Contact

METAL SHELL

No Number - For Solderpot

For space application, connector shell finish must be "N".

Any deviations to these P/N's will result in assignment

ofa special P/N, consult customer service. No letter - for plastic type connector

C - Cadmium / Yellow chromate over nickel

N - Electroless Nickel

Tolerance on wire lengths ±.015

M83513/ 10 * *CA-

MIL-C-83513 SLASHSHEET

INSERT ARRANGEMENT

WIRE TYPE

SHELL FINISH

NOTES:

N-Nojackpost

P-Jackpost (permanently attached)

T - Threaded insert

HARDWARE

For every Mil Spec Part Number, ITT has one

corresponding part number

10 –Connector, Plug, Condensed BoardRightAngle (CBR), Sizes 9 –37

11 –Connector, Plug, CBR, Size 51

12 –Connector, Plug, CBR, Size 100

13 –Connector, Receptacle, CBR, Sizes 9 –37

14 –Connector, Receptacle, CBR Size 51

15 –Connector, Receptacle, CBR, Size 100

16–Connector, Plug, Board Right Angle (BR), Sizes 9 –37

17 –Connector, Plug, BR, Size 51

18–Connector, Plug, BR, Size 100

19 –Connector, Receptacle, BR, Sizes9–37

20 –Connector, Receptacle, BR Size 51

21 –Connector, Receptacle, BR Size 100

22 –Connector, Plug, Board Straight (BS), Sizes 9 –37

23 –Connector, Plug, BS, Size 51

24 –Connector, Plug, BS, Size 100

25 –Connector, Receptacle, BS, Sizes 9 –37

26–Connector, Receptacle, BS, Size 51

27 –Connector, Receptacle, BS Size 100

Micro-D PCB - .050" Contact Spacing MDM-PCB

How to Order - MDM-PCB Series

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

MDM-PCB connectors are designed for use

with flex circuitry, flat cable and printed circuit

boards or multi-layer boards. They use the

standard MDM metal shell and provide high

density and high reliability in board-to-board,

board-to-cable and cable-to-cable applications.

MDM-PCB connectors are available in 8 shell

sizes with 9 to 100 contacts. Terminations

may be straight (BS) or at 90˚ right angle (BR,

CBR) board thickness. Jackpost mounting for

use with locking hardware is also available.

SERIES

INSULATOR MATERIAL

CONTACT ARRANGEMENT

CONTACT TYPE

TERMINATION TYPE

MOUNTING HARDWARE (Shell Flange)

MOUNTING HARDWARE FOR PCB

TERMINATION TAIL LENGTH MODIFICATION CODE

SHELL FINISH MODIFICATION CODES

SERIES

MOUNTING HARDWARE FOR PCB

TERMINATION TAIL LENGTH MODIFICATION CODE

SHELL FINISH MODIFICATION CODES

INSULATOR MATERIAL

CONTACT ARRANGEMENT

CONTACT TYPE

TERMINATION TYPE

MOUNTING HARDWARE (Shell Flange)

MDM - Micro "D" Metal Shell

T - Threaded Insert

#2-56 Thd for Shell Sizes 9 thru 51

#4-40 Thd for Shell Size 100

No letter - none

None - .109 (2.77) ±.015 (0.38) Standard

L61 - .125 (3.18)

L56 - .150 (3.81)

L57 - .190 (4.83)

L39 - .250 (6.35)

L58 - .375 (9.52)

None - Yellow Chromate/Cadmium over Nickel

A174 - Electroless Nickel

A172 - Gold over Nickel

A141 - Irridite/Alodine

A30 - Black Anodize

(For special modification codes, consult

customer service.)

NOTE: Back molding material –

Epoxy Hysol #MG40FS

MDM * - - 25 P PBS T L39 A174

Liquid Crystal Polymer (LCP)

9, 15, 21, 25, 31, 37, 51, and 100

P - Pin (Plug)

S - Socket (Receptacle)

BS - Straight PCB Termination

BR - Right Angle PCB Termination

CBR - Right Angle Narrow Profile PCB Terminations

P - Jackposts

M7 - Jackposts

M83513/5-07 (Sizes 9-51)

M17 - Jackposts

M83513/5-17 (Size 100)

No letter - none

RoHS COMPLIANCE

Micro-D PCB - .050" Contact Spacing MDM-PCB

BS (Board Straight) Series

www.ittcannon.com

.096 ± .005

(2.44 ± 0.13) DIA.

Size 9-51)

.120 ± .005

(3.05 ± 0.13)

Size 100

CAV.

#1LAST

CAV.

JACKPOST (9-51)

#2-56 UNC-2B TYP.

JACKPOST (100)

#4-40 UNC-2B TYP.

.186 (4.72) MAX. PLUG

.198 (5.03) MAX. RECEPTACLE

.109 ± 0.15

(2.77 ± 0.38)

LAST CAV.

CAV. #1

.050

(1.27)

6789

12345

9 10 11 12 13 14 15

1 2 3 4 5 6 7 8

12 13 14 15 16 17 18 19 20 21

1 2 3 4 5 6 7 8 9 10 11

14 15 16 17 18 19 20 21 22 23 24 25

1 2 3 4 5 6 7 8 9 10 11 12 13

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

19 35

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

.050

(1.27) .050

(1.27) .100

(2.54)

TYP.

.150

(3.81)

.150

(3.81)

.150

(3.81) .150

(3.81)

.150

(3.81)

.050

(1.27)

.050

(1.27)

.050

(1.27)

.150

(3.81)

.375

(9.53)

.225

(5.72)

TYP.

.225

(5.72)

PCB Termination Arrangements* (Viewed from PCB solder side)

9 Contacts

31 Contacts

15 Contacts

37 Contacts

100 Contacts

51 Contacts

21 Contacts 25 Contacts

Identification number shown for plug connector, use reverse order for socket connector.

NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dipped

All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27)

NOTE: Dimensions shown are for reference only-consult factory for final design dimensions.

.100 (2.54)

REF.

±.007 (.18)

*For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100.

Part Number

By Shell Size

Max.

±.005 (.13)

Max.

MDM-9PBS*

MDM-9SBS*

MDM-15PBS*

MDM-15SBS*

MDM-21PBS*

MDM-21SBS*

MDM-25PBS

MDM-25SBS*

MDM-31PBS*

MDM-31SBS*

MDM-37PBS*

MDM-37SBS*

MDM-51PBS*

MDM-51SBS*

MDM-100PBS*

MDM-100SBS*

1.390 (35.31)

1.690 (43.93)

1.740 (44.20)

2.040 (51.82)

2.340 (59.44)

2.270 (67.66)

3.070 (77.98)

1.150 (29.21)

1.450 (36.83)

1.500 (38.10)

1.800 (45.72)

2.100 (53.34)

2.000 (50.80)

2.800 (71.12)

.565 (14.35)

.715 (18.16)

.865 (21.97)

.965 (24.51)

1.115 (28.32)

1.265 (32.13)

1.215 (30.86)

1.800 (45.72)

.785 (19.94)

.935 (23.75)

1.085 (27.56)

1.185 (30.10)

1.335 (33.91)

1.485 (37.72)

1.435 (36.45)

2.175 (55.24)

.334 (8.48)

.402 (10.21)

.484 (12.29)

.552 (13.97)

.634 (16.10)

.702 (17.83)

.734 (18.64)

.802 (20.37)

.884 (22.45)

.952 (24.18)

1.034 (26.26)

1.102 (27.99)

.984 (24.99)

1.052 (26.72)

1.384 (35.15)

1.508 (38.30)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.228 (5.79)

.296 (7.52)

.271 (6.88)

.394 (10.01)

.308 (7.82)

.351 (8.92)

.460 (11.68)

.165 (4.19)

.303 (7.70)

.355 (9.02)

.550 (12.70)

.555 (14.10)

.686 (17.42)

.686 (17.75)

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Micro-D PCB - .050" Contact Spacing MDM-PCB

BR (Board Right Angle) Series

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

.300

(7.62)

PCB Termination Arrangements (Viewed from bottom of connector, PCB solder side.)

Identification number shown for plug connector, use reverse order for socket connector.

.109 ± .015

(2.77 ± 0.38)

.186 (4.72)

MAX. PLUG

.198 (5.05)

MAX.

.100

(2.54)

TYP.

JACKPOST

#2-56 UNC-2B TYP.

.125 ± .015

(3.18 ± 0.38)

.150 ± .010

(3.8 ± 0.25)

.096 ± .005

(2.44 ± 0.31)

.050

(1.27)

TYP.

.100 TYP.

CAV.

LAST

CAV.

6789

12345

9 10 11 12 13 14 15

1 2 3 4 5 6 7 8

12 13 14 15 16 17 18 19 20 21

1234567891011

14 15 16 17 18 19 20 21 22 23 24 25

1 2 3 4 5 6 7 8 9 10 11 12 13

17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 .150

(3.81)

.050

(1.27)

.150

(3.81)

.150

(3.81)

.150

(3.81)

.150

(3.81)

.150

(3.81)

.175

(4.45)

.150

(3.81)

.375

(9.53)

.150

(3.81) .150

(3.81)

.225

(5.72)

9 Contacts

31 Contacts

15 Contacts

37 Contacts 51 Contacts

21 Contacts 25 Contacts

52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

.150

(3.81)

.050

(1.27)

100 Contacts

NOTE: Standard lead termination is #24 AWG, gold plated, solid copper, solder or tin dripped.

*For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100.

Part Number

By Shell Size

MDM-9PBR*

MDM-9SBR*

MDM-15PBR*

MDM-15SBR*

MDM-21PBR*

MDM-21SBR*

MDM-25PBR*

MDM-25SBR*

MDM-31PBR*

MDM-31SBR*

MDM-37PBR*

MDM-37SBR*

MDM-51PBR*

MDM-51SBR*

MDM-100PBR*

MDM-100SBR*

1.390 (35.31)

1.540 (39.12)

1.690 (42.93)

1.790 (45.47)

2.040 (51.82)

2.040 (51.52)

2.340 (59.44)

1.875 (47.63)

2.74 (69.72)

1.150 (29.21)

1.300 (33.02)

1.450 (36.83)

1.550 (39.37)

1.800 (45.72)

2.100 (53.34)

1.600 (40.64)

2.500 (63.50)

.565 (14.35)

.715 (18.16)

.865 (21.97)

.965 (24.51)

1.115 (28.32)

1.265 (32.13)

1.215 (30.86)

1.800 (45.72)

.334 (8.48)

.402 (10.21)

.484 (12.29)

.552 (13.97)

.634 (16.10)

.702 (17.83)

.734 (18.64)

.802 (20.37)

.884 (22.45)

.952 (24.18)

1.034 (26.26)

1.102 (27.99)

.984 (24.99)

1.052 (26.72)

1.384 (35.15)

1.508 (38.10)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.228 (5.79)

.296 (7.52)

.271 (6.88)

.394 (10.01)

.455 (11.56)

.565 (14.35)

.755 (19.18)

.308 (7.82)

.351 (8.92)

.394 (10.01)

Max.

± .007 (.18)

± .005 (.13)

Max.

All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27).

Micro-D PCB - .050" Contact Spacing MDM-PCB

CBR (Condensed Board Right Angle) Series

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

+ +

PCB Termination Arrangements (Viewed from bottom of connector, PCB solder side.)

Identification number shown for plug connector, use reverse order for socket connector.

542 1

13572410121416

1719212325272930

182022262831

24689111315 1357

10121416

1719

21232527

30323436

20222628

31333537

2468

111315

1357

10121416

212325

29 46 43 41

303234

363738394044

45 42

4748495051

20222628

313335

2468

111315 1357

24 10121416

212325

39414345474951

283032343638404244464850

535557596163656769717375

525456586062646668707274

767880828486889092949698100

777981838587899193959799

18202226

313335

2468

111315

98 3 76

2457

861231

21 212325

2224

1011131415

.083

(2.11)

LAST

CAV.

.109 ± .015

(2.77 ± 0.38)

JACKPOST 2-56

UNC-2B TYP.

(Size 9-51)

.186 (4.72)

MAX.PLUG

.198 (5.03)

MAX. RECEPT.

.096 ± .005

(2.44 ± 0.31)

DIA.TYP.

(Size 9-51)

SEE

VIEW X SEE

VIEW Y

SEE

VIEW W

* *

FOR 31: 1.085(27.56) MAX.

FOR 37: 1.185(30.10) MAX.

FOR 51: 1.225(31.12) MAX.

* *

.125 ± .005

(3.18 ± 0.31)

DIA. TYP.

.185

(4.70)MAX. C

JACKPOST

#4-40 UNC 2B TYP.

1.815 (46.10) MAX.

100 VIEW

CAV.

.020

(0.51)

.158 (4.00)

.020

(0.51)

.020

(0.51)

.183

(4.65)

.108

(2.73)

.050

(1.27)

.108

(2.73)

.100 (2.54)

TYP.

.050 (1.27)

TYP.

.020

(0.51)

.083

(2.11)

.020

(0.51)

.083 (2.11)

.020

(0.51)

.325 (8.26) .275 (6.98)

.100 ± .005

(2.54 ± 0.13)

9 Contacts

View X

15 Contacts

View X

21 Contacts

View X

25 Contacts

View X

100 Contacts

View W

51 Contacts

View Y

37 Contacts

View Y

31 Contacts

View Y

NOTE: Standard lead termination is #24 AWG, solid copper,

solder or tin dripped.

*For jackpost, add letter "P" or "M7" for sizes 9-51, "M17" for size 100.

Part Number

By Shell Size

MDM-9PCBR*

MDM-9SCBR*

MDM-15PCBR*

MDM-15SCBR*

MDM-21PCBR*

MDM-21SCBR*

MDM-25PCBR*

MDM-25SCBR*

MDM-31PCBR*

MDM-31SCBR*

MDM-37PCBR*

MDM-37SCBR*

MDM-51PCBR*

MDM-51SCBR*

MDM-100PCBR*

MDM-100SCBR*

.785 (19.94)

.935 (23.75)

1.085 (27.56)

1.185 (30.10)

1.335 (33.91)

1.485 (37.72)

1.435 (36.45)

2.170 (55.12)

.565 (14.35)

.715 (18.16)

.865 (21.97)

.965 (24.51)

1.115 (28.32)

1.265 (32.13)

1.215 (30.86)

1.800 (45.72)

.334 (8.48)

.402 (10.21)

.484 (12.29)

.552 (13.97)

.634 (16.10)

.702 (17.83)

.734 (18.64)

.802 (20.37)

.884 (22.45)

.952 (24.18)

1.034 (26.26)

1.102 (27.99)

.984 (24.99)

1.052 (26.72)

1.384 (35.15)

1.508 (38.10)

.308 (7.82)

.351 (8.92)

.394 (10.01)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.184 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.185 (4.70)

.253 (6.43)

.228 (5.79)

.296 (7.52)

.271 (6.88)

.394 (10.01)

.420 (10.67)

.520 (13.21)

.650 (16.15)

1.000 (25.40)

.250 (6.35)

.300 (7.62)

.400 (10.16)

.230 (5.81)

.130 (3.30)

.150 (3.81)

.200 (5.08)

Max. B

± .005 (.13) G

± .010 (.25) H

± .010 (.25)

Max. D

Max. E

Max. F

Max.

All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27).

Micro-D Coaxial/Power - .050" Contact Spacing MDM C/P

Coaxial Contacts

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

MDM Power

The same insulator that is used with coaxial contacts is

available with power contacts. This offers the versatility of

combining power and signal lines in the same connector.

MDM Coaxial/Power

Power and coaxial contacts can be interchanged as

desired. Power contacts are rated at 13 amps, 24V rms,

AWG #16 stranded.

MDM Coaxial

The MDM Metal Shell Connectors have been

tooled in several coaxial layouts and offer the

versatility of combining coaxial and signal lines

in the same connector. Any modifications to

these layouts or new requirements, please con-

sult the factory. Standard coax is RG178 white.

++ ++

7C2/7P2

Plug

308 (7.82)

MAX

1.185 (30.10) MAX.

1.435 (36.45) MAX.

1.215 ± .005

(30.86 ± 0.13)

1.435 (36.45) MAX.

1.215 ± .005

(30.86 ± 0.13)

.351 (8.92)

MAX. .351 (8.92)

MAX.

.091 ± .003

(2.31 ± 0.08)DIA. .091 ± .003

(2.31 ± 0.08)DIA.

.091 ± .003

(2.31 ± 0.08)

.965 ± .005

(24.51 ± 0.13)

.416 (10.57)

MAX.

.416 (10.51)

MAX.

.186 (4.92) MAX.

.186 (4.92)

MAX.

.100

(2.54)

MAX.

.100

(2.54)

MAX.

.800

(20.32)

MAX.

1.050

(26.67)

MAX.

.308 (7.82) MAX.

1.185 (30.10) MAX. .199 (5.05) MAX.

.199 (5.05)

MAX.

.429 (10.90)

MAX.

.429 (10.90)

MAX.

.100

(2.54)

MAX.

.100

(2.54)

MAX. 1.050

(26.67)

MAX.

.800

(20.32)

MAX.

.965 ± .005

(24.51 ± 0.13)

.091 ± .003

(2.31 ± 0.08) DIA.

DIA.

Plug

Receptacle

24C4/24P4

Plug Receptacle

Power Contacts

BACK POTTING

REQUIRED

.350 (8.89)

MAX.

Plug

Receptacle

How to Order

For 83513-Style ordering information see pages 16 and 17

SERIES

RoHS COMPLIANCE

MDM 51 P H 001 P XXX- -

SERIES

CONTACT ARRANGEMENTS

CONTACT TYPE

TERMINATION TYPE

CONTACT ARRANGEMENTS

CONTACT TYPE

TERMINATION TYPE

TERMINATION CODE

TERMINATION CODE*

HARDWARE

MDM: (Size 9-100) Liquid Crystal Polymer (LCP)

MDM: (Combo Layout) Diallyl Phthalate (DAP)

(H) 001 - 18",7/34 strand,#26 AWG,

MIL-W-16878/4, Type E Teflon, yellow.

(H) 003 - 18", 7/34 strand, #26 AWG,

MIL-W-16878/4, Type E Teflon,

color coded to MIL-STD-681 System I.

M - Military specification hardware, see

page 11 for military hardware codes.

P - Jackpost

K - Jackscrew-standard profile

L - Jackscrew-low profile

F - Float mount

B - No hardware standard

.091 (2.31) dia. hole for sizes 9-51;

.120 (3.05) dia. hole for size 100.

A - .125 (3.18) dia. mounting holes for sizes 9-51;

.166 (4.22) dia. hole for size 100.

B1 - .1475 (3.75) dia. hole for size 100

(Per 83513-Style)

No Number - (Standard cadmium/yellow

chromate over nickel

A174 - Electroless nickel

A172 - Gold over nickel

A141 - Irridite/alodine

A30 - Black anodize

*See page 79 and 81 for additional Termination codes.

9-15-21-25-31-37-51-100 (standard)

16C5, 10C10, 7C2, 24C4 (coaxial)

16P5, 10P10, 7P2, 24P4 (power)

P - Pin S - Socket

H - Harness-insulated wire.

L - Solid-uninsulated wire.

S - Solder pot to accept #26 AWG MAX.

harness wire. (Not available with power

contact arrangements.)

or combination of

coax and power

SHELL FINISH MOD CODES

HARDWARE

SHELL FINISH MOD CODES

}

(L) 1 - 1/2" uninsulated solid #25

AWG gold plated copper.

(L) 2 - 1" uninsulated solid #25 AWG

gold plated copper.

Microminiature Connectors Hermetic-MDMH

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

MDMH connectors are ideal for applications

requiring a better seal than can be achieved

with epoxy resins.

The connector utilizes size 24 AWG contacts

that are compression glass sealed through a

steel shell and into a diallyl pthalate front end

insulator. An interfacial seal provides

environmental protection when mated. We

recommend MDMH receptacles be soldered

to the chassis or container for a completely

leak-proof joint.

MDMH receptacles mate with standard MDM

plugs.

Features

• Hermetically sealed connector designed for

those applications where a vacuum, inert

gas or a constant controlled pressure are

required to eliminate adverse effects creat-

ed by atmospheric changes.

• Steel shells to provide greater strength, pre-

vent chipping, cracking or breaking, offer

electro-magnetic (EMI) and RFI shielding.

• Silicone elastomer compression interfacial

seal to provide a moisture and humidity

seal between each contact and between

contacts and shell.

Specifications

Standard materials & finishes

Shell Mild steel, tin-lead plated

Insulator Glass filled diallyl phthalate per MIL-M-14. Type SDGF

Contacts Copper alloy, gold plated sockets on mild steel gold plated pins. Solder pots - mild steel gold plated

Hermetic seal Compression glass

Leak rate 1 micron cubic ft/hr max (1.04 x 10-5 cc/sec at 1 ATM pressure differential)

ELECTRICAL DATA

No. of contacts 9to 100

Dielectric withstanding voltage 150 VAC

Insulation resistance 5000 Mohm minimum

Wiresize #26 through #30 AWG

Contact termination Solder pot

MECHANICAL FEATURES

Size or length 8sizes

Service class Hermetically sealed

Coupling Friction/jacks

Polarization Keystone shaped shells

Contact spacing .050 (1,27) centers

Shell style Receptacle, solder mount

How to Order

MDMH – 51 S S

Hermetic Micro D Receptacle Series

Contact layout

Socket Contacts (only)

Termination type

9, 15, 21, 25, 31, 37, 51, 100

Microminiature Connectors Hermetic-MDMH

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

6,61

(.260)

MAX

4,58

(.180)

MAX

5,06 (.199)MAX

1,93

(.076)

MAX

2 HOLES 2-56 UNC (9-51 WAY)

4-40 UNC (100 WAY)

Face vew of socket insert - use reverse order for wiring side.

9 Contacts

54321

9876

8 7 6 5 4 3 2 1

15 14 1 3 12 11 10 9

15 Contacts

11 10 9 8 7 6 5 4 3 2 1

21 20 19 18 17 16 15 14 13 12

21 Contacts

37 Contacts 31 Contacts

13 12 11 10 98 7 6 5 4 3 2 1

25 24 23 22 21 20 19 18 17 16 15 14

25 Contacts

18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

51 Contacts

12 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100

100 Contacts

Contact identification numbers a re for refe rence only and do not appear on insulator or connector bod y.

35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19

51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36

19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20

16 15 14 13 12 11 10 98 7 6 5 4 3 2 1

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17

Contact Arrangements

Part Number A B C D E F G

by shell size max max max max max ±.005 (0,13) max

MDMH-9S .885 (22,48) .738 (18,74) .400 (10,16) .270 (6,86) .430 (10,92) .565 (14,35) .261 (6,63)

MDMH-15S 1.035 (26,29) .888 (22,55) .550 (13,97) .270 (6,86) .430 (10,92) .715 (18,16) .261 (6,63)

MDMH-21S 1.185 (30,10) 1.038 (26,36) .770 (17,78) .270 (6,86) .430 (10,92) .865 (21,97) .261 (6,63)

MDMH-25S 1.285 (32,64) 1.137 (28,87) .800 (20,32) .270 (6,86) .430 (10,92) .965 (24,51) .261 (6,63)

MDMH-31S 1.435 (36,45) 1.288 (32,72) .950 (24,13) .270 (6,86 .430 (10,92) 1.115 (28,32) .261 (6,63)

MDMH-37S 1.585 (40,26) 1.438 (36,53) 1.100 (27,94) .270 (6,86) .430 (10,92) 1.265 (32,13) .261 (6,63)

MDMH-51S 1.535 (38,99) 1.388 (35,26) 1.050 (26,67) .310 (8,00) .473 (12,01) 1.215 (30,86) .315 (8,00)

MDMH-100S 2.275 (57,78) 2.078 (52,78) 1.455 (36,97) .365 (9,27) .522 (13,26) 1.800 (45,72) .410 (10,41)

Shell Dimensions

Microminiature Connectors Filter-TMDM

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

With an increasing number of MDM connec-

tors being used in avionics and military equip-

ment and with increasing emphasis being put

on EMI, RFI and EMP shielding, Cannon have

developed a range of filter connectors to suit

most applications.

The TMDM receptacle accommodates from 8

to 37 sizes, 24 AWG socket contacts on 1,27

(.050) centres and mates with the standard

MDM plugs.

Features

• Transverse monolith filter for EMI and RFI

shielding.

• Rugged aluminum one piece shell.

• Silicone interfacial environmental seal.

• Glass filled diallyl phthalate insulator.

• A variety of filter types for each pin.

Specifications

Standard materials & finishes

Shell Aluminum alloy per QQ-A-200/8 with electroless nickel finish per QQ-N-290

Insulator Glass filled diallyl phthalate per MIL-M-14. Type SDGF

Contact, socket Copper alloy, 50 microinch gold per MIL-G-45204, Type ll, Class l

Interfacial seal Silicone base rubber

ELECTRICAL DATA

No. of contacts 9 to 37

Dielectric withstanding voltage 300 VAC

Insulation resistance 5000 Mohm at 100 VDC

Voltage rating (working) 100 VDC

Current rating 3 amps max.

Maximum capacitance 250, 500, 1000, 2000 picofarads

Filter type C

MECHANICAL FEATURES

Size or length 6 sizes

Coupling Friction/jackscrews

Polarization Keystone shaped shell

Contact spacing .050 (1,27) centers

Shell style Single piece receptacle

How to Order

TMDM – C1 15 S H 001 B- *

Series

Filter type

Number of contacts

Contact style

Termination type

Termination/modifier code

Mounting code

Modification code

Series:

Filter TMDM - Micro “D” - Metal housing

Filter type:

“C” capacitor type

C1 150 - 250 pF capacitance

C2 300 - 500 pF capacitance

C3 700 - 1000 pF capacitance

C4 1300 - 2000 pF capacitance

Number of contacts:

9, 15, 21, 25, 31, 37 only

Contact style:

S-socket (receptacle)

P - Pin (plug)

Termination type:

H-harness, insulated solid or stranded wire

L-lead, solid uninsulated wire

Termination:

Consult standard wire termination code for lead

material and lead length

Mounting code:

A - Flange mounting, Ø.125 (3,18)

mounting holes

B - Flange mounting, Ø.092 (2,34)

mounting holes

L-Low profile (slotted head)

M2 - Allen head jackscrew assembly,

low profile

M3 - Allen head jackscrew assembly,

high profile

M5 - Slot head jackscrew assembly,

low profile

M6- Slot head jackscrew assembly,

high profile

M7 - Jacknut assembly

P - Jackpost

Modification code:

Shell finish MOD. Codes. *

Tobe assigned as required

*No number = Standard tin/lead finish

Microminiature Connectors Filter-TMDM

Standard Wire Termination Codes

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Guaranteed Minimum Attenuation

Filter Capacitance Minimum Insertion Loss-decibels

designation range (pF) 10 MHz 15 MHz 30 MHz 50 MHz 100 MHz 200 MHz 500 MHz 1 GHz

C1 150 - 250 4 6 15 20 35

C2 300 - 500 3 6 12 18 25 40

C3 700 - 1000 3 7 13 17 25 38 48

C4 1300 - 2000 5 8 13 18 23 30 40 50

Harness Type (H) #26 AWG per

MIL-W-16878/4 Type E Teflon, stranded

Length All Yellow Color Coded

3(76.2) H020 H027

6 (152.4) H019 H016

8 (203.2) H026 H034

10 (254.0) H029 H025

12 (304.8) H028 H002

18 (457.2) H001 H003

20 (508.0) H038 H023

24 (509.6) H009 H004

30 (762.0) H010 H005

36 (914.4) H011 H006

48 (1219.2) H013 H048

72 (1828.8) H017 H046

120 (3048.0) H042 H041

Solid Uninsulated Type (L)

#25 AWG gold plated copper.

Code Length

L61 .125 (.18)

L56 .150 (3.81)

L57 .190 (4.83)

L39 .250 (5.35)

L58 .375 (9.52)

L1 .500 (12.70)

L14 .750 (19.05)

L2 1.000 (25.40)

L7 1.500 (38.10)

L6 2.000 (50.80)

L6 2.500 (63.50)

L10 3.000 (76.20)

Shell Dimensions

*.750 max for pre-wired versions (H modifier above)

Part Number A B C D E F max G

by shell size max max max max max ±0,13 (.005) max

MDMT

-9S* .785 (19,94) .400 (10,16) .400 (10,16) .270 (6,86) .308 (7,83) .565 (14,36) .251 (6,38)

MDMT

-15S* .935 (23,75) .550 (13,97) .550 (13,97) .270 (6,86) .308 (7,83) .715 (18,17) .251 (6,38)

MDMT

-21S* 1.085 (27,60) .700 (17,78) .700 (17,78) .270 (6,86) .308 (7,83) .865 (21,98) .251 (6,38)

MDMT

-25S* 1.185 (30,10) .800 (20,32) .800 (20,32) .270 (6,86) .308 (7,83) .965 (24,52) .251 (6,38)

MDMT

-31S* 1.335 (33,90) .950 (24,13) .950 (24,13) .270 (6,86) .308 (7,83) 1.115 (28,30) .251 (6,38)

MDMT

-37S* 1.485 (37,70) 1.100 (28,00) 1.100 (28,00) .270 (6,86) .308 (7,83) 1.265 (32,20) .251 (6,38)

Cannon Modification Codes – (Not Mil Spec)

The following termination codes are listed for your information. For additional codes

please refer to Appendix on page 79 and 81. All wire lengths are minimum.

5,06

(.199)

MAX

7,60

(.299)

MAX

10,90

(.500)*

MAX

2HOLES

Ø2,32 (.091)

±0,08(.003)

Microminiature Connectors Filter-TMDM

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Typical Filter Performance

1300-2000 pF

700-1000 pF

300-500 pF

150-250pF

FREQUENCY (MHz)

ATTENUATION (dB)

110 1001000

PCB ordering information - page 30

SERIES-INSULATOR STYLE-MATERIAL

MDB - Screw mounting-Diallyl phthalate

MDVB - Screw mounting-Polyester

H - Insulated solid or stranded wire

L - Uninsulated solid wire

S - Solder pot to accept #26 AWG max.

harness wire.

No designator - No hardware - standard mounting

.091 (2.31) hole diameter

P - Jackpost

K - Jackscrew-standard

L - Jackscrew-low profile

F - Float mount

M - Military specification hardware, see page 13.

1 - .050 (1.27) centers

9-15-21-25-31-37-51. See page 9

P - Pin S - Socket

CONTACT SPACING

CONTACT ARRANGEMENT

CONTACT TYPE

CONTACT SPACING

CONTACT ARRANGEMENT

CONTACT TYPE

TERMINATION TYPE

TERMINATION TYPE LOCKING HARDWARE (SCREWMOUNTINGONLY)

TERMINATION CODE

LOCKING HARDWARE

MD** 1-9PH001P

(H) 001 - 18", 7/34strand, #26 AWG,

MIL-W-16878/4,Type E Teflon, Yellow.

(H) 003 - 18", 7/34strand, #26 AWG,

MIL-W-16878/4,Type E Teflon, color

coded to MIL-STD-681 System I.

(L) 1 - 1/2"uninsulated solid #25 AWG gold plated copper.

(L) 2 - 1"uninsulated solid #25 AWG gold plated copper.

TERMINATION CODE

RoHS COMPLIANCE

See page 79 and 81for additional codes

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Micro-D Plastic Shell - .050" Contact Spacing MD**

How to Order

Microminiature Rectangular Connectors

with MICRO-Pin Contacts on .050 (1.27)

centers.

MICRO-D microminiature rack/panel connec-

tors are used in applications requiring highly

reliable, extremely small, lightweight connec-

tors. These connectors are available in 2 insu-

lator materials, 2 mounting variations, 7 shell

sizes accommodating from 9 to 51 contacts

and a special arrangement of 5 micro contacts

and 2 coaxials. The insulator materials listed

give the MICRO-D connector wide versatility

in most applications required by industry.

ITT can also terminate a wide variety of

stranded or solid wire directly to MICRO-D

contacts, which is often desirable in high den-

sity arrangements.

MICRO-D connectors can also be custom har-

nessed to meet any customer requirement of

single or multiple connectors. Pigtail lead and

harness description must be given by the cus-

tomer. A typical description would be: .5" #25

AWG, gold plated copper leads or 18" of #26

yellow, Teflon-insulated, Type E wire. Shown

below are various methods of termination.

Consult customer service for any routine or

complex harnessing of MICRO-D connectors.

•Glass-filled diallyl phthalate thermoset

material used in high temperature applica-

tions that is immune to cleaning solvents.

It also has excellent dielectric properties.

Temperature range: -65˚F to +300˚F

(-55˚C to +149˚C).

•Glass-filled polyester thermoplastic that is

not affected by cleaning solvents and

exhibits excellent dielectric properties.

Temperature range: -55˚F to +257˚F

(-65˚C to +125˚C).

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Specifications

MATERIALS AND FINISHES

Shell/Insulator (One Piece) MD/MDB: Glass-filled

thermoset plastic

MDV/MDVB:

Thermoplastic

ELECTRICAL DATA

MECHANICAL FEATURES

No of Contacts

Size or Length

Coupling

Polarization

Contact Spacing

Centers

Shell Styles

Consult factory for availabilty.

Coaxial Cable

Wire Size

Contact Termination

- 9 to 51: (1 arrangement of 5

contacts and 2 coaxials - for

screw mount only)

- 7 sizes

-Friction/jackscrews

-Keystone-shaped shells

-.050 (1.27mm)

- Plug and receptacle

- RG-178/U (Not available for

MD clip mount)

- #24 thru #32 AWG

- Multi-indent crimp

-Copper alloy, gold plate

Contacts

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Standard Wire Termination Codes

Cavity #1 black*

The following termination codes are listed for your information. For additional codes please refer to Appendix

on page 79 and 81. All wire lengths are minimum.

#26 AWG per MIL-W-16878 Type ETeflon,stranded.

Harness Typ e(H)

Length

3 (76.2)

6(152.4)

8(203.2)

10 (254.0)

12(304.8)

18 (457.2)

20 (508.0)

24 (609.6)

30 (762.0)

36(914.4)

48(1219.2)

72(1828.8)

120 (3048.0)

H020

H019

H026

H029

H028

H001

H038

H009

H010

H011

H013

H017

H042

H027

H016

H034

H025

H002

H003

H023

H004

H005

H006

H048

H046

H041

L61

L56

L57

L39

L58

L14

L16

L10

.125 (3.18)

.150 (3.81)

.190 (4.83)

.250 (6.35)

.375 (9.52)

.500 (12.70)

.750 (19.05)

1.000 (25.40)

1.500 (38.10)

2.000 (50.80)

2.500 (63.50)

3.000 (76.20)

All YellowColorCoded* TerminationCodeLength

#25AWG Gold Plated Copper

SolidUninsulatedType(L)

Micro-D Plastic Shell - .050" Contact Spacing MDB/MDVB

With Screw Mounting Holes (Conforms to 83513-Style)

MDB

.304 (7.72)

MAX.

.204 (5.18)

MAX.

.185 (4.70)

MAX.

.100 (2.54)

MAX.

.285 (7.24)

MAX.

.375 (9.92)

MAX.

.100 (2.54)

MAX.

.110

(2.79)

MAX.

TWO MTG. HOLES .091 ± .003

(2.31 ± 0.08)

.200

(5.08)

MAX.

.154

(3.91)

MAX.

.200

(5.08)

MAX.

.395 (10.03)

MAX.

Solder Pot

Glass-filled Diallyl Phthalate

Plastic Insulator MDVB Glass-filled Polyester

Plastic Insulator

Part Number by Shell Size

Add lead type and length, see Part Number Explanation.

Weight given is with 1/2", uninsulated solid #25 AWG gold plated copper pigtails.

***

Max. B

Max. C

Max. D

Max. E

Max. F

±.005

Avg.

Weight***

±5% (oz.)

±5% (gm.)

MDB1-9P**

MDB1-9S**

MDB1-15P**

MDB1-15S**

MDB1-21P**

MDB1-21S**

MDB1-25P**

MDB1-25S**

MDB1-31P**

MDB1-31S**

MDB1-37P**

MDB1-37S**

MDB1-51P**

MDB1-51S**

MDVB1-9P**

MDVB1-9S**

MDVB1-15p**

MDVB1-15S**

MDVB1-21P**

MDVB1-21S**

MDVB1-25P**

MDVB1-25S**

MDVB1-31P**

MDVB1-31S**

MDVB1-37P**

MDVB1-37S**

MDVB1-51P**

MDVB1-51S**

.788 (20.02)

.938 (23.82)

1.088 (27.64)

1.188 (30.18)

1.338 (33.98)

1.488 (37.80)

1.438 (36.52)

.292 (7.42)

.380 (9.65)

.442 (11.23)

.530 (13.46)

.592 (15.04)

.680 (17.27)

.692 (17.58)

.780 (19.81)

.842 (21.39)

.930 (23.62)

.992 (25.20)

1.080 (27.43)

.942 (23.93)

1.030 (26.16)

.408 (10.36)

.588 (14.17)

.708 (17.98)

.808 (20.56)

.958 (24.33)

1.108 (28.14)

1.058 (26.87)

.173 (4.39)

.220 (5.59)

.218 (5.54)

.260 (6.60)

.565 (14.35)

.715 (18.16)

.865 (21.97)

.965 (24.51)

1.115 (28.32)

1.115 (38.32)

1.265 (32.13)

1.215 (30.86)

.026 (0.73)

.025 (0.70)

.038 (1.10)

.035 (1.00)

.053 (1.50)

.050 (1.40)

.063 (1.80)

.056 (1.60)

.080 (2.30)

.073 (2.10)

.086 (2.45)

.076 (2.15)

.109 (3.10)

.093 (2.64)

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Micro-D Plastic Shell - .050" Contact Spacing MD*B-PCB

MD*B-PCB connectors use standard MD*B all

plastic shells and are designed for use with

flex circuitry, printed circuit and multi-layer

boards. They are easily mounted and soldered

and provide high density/high reliability in

board-to-board and board-to-cable applica-

tions. While being similar to the MDM-PCB

connectors, the MD*B-PCB connectors are all

plastic, extremely small, and lightweight yet

rugged enough for use in the most demanding

applications.

MD*B-PCB connectors are available in

seven shell sizes with 9 to 51 contacts in the

popular 90° narrow profile PCB termination,

with a variety of tail lengths for varying board

thickness.

How to Order

SERIES

CONTACT ARRANGEMENT

CONTACT TYPE

TERMINATION TYPE

HARDWARE

TERMINATION TAIL LENGTH

MODIFICATION CODES

(Consult Factory)

MD*B - -37 S CBR * * * *L39

RoHS COMPLIANCE

Jackpost mounting for use with locking hard-

ware is also available.

If the connectors shown in the catalog do

not meet the requirements of your applica-

tions, a special shape, size or layout using

the basic all plastic shell can be made avail-

able. For further technical and applications

information, contact customer service.

CONNECTOR SERIES

MDVB, MDB

CONNECTOR ARRANGEMENT

9, 15, 21, 25, 31, 51

CONTACT TYPE

S=Socket

P=Pin

TERMINATION TYPE

CBR = 90° Narrow Profile PCB Terminations

HARDWARE

P = Jackpost

M7 = Jackposts, M635135-07

No Letter = Less Hardware

TERMINATION TAIL LENGTH CODES

NONE – .109 (2.77) ± 0.15 (0.38) Standard

L61 – .125 (3.18)

L66 – .150 (3.81)

L57 – .190 (4.83)

L39 –.250 (6.35)

L58 – .375 (9.52)

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Micro-D Plastic Shell - .050" Contact Spacing MD*B-PCB

CBR Series (90˚ Mounting Narrow Profile)

+ +

542 1

13572410121416

1719212325272930

182022262831

24689111315

1357

10121416

1719

21232527

30323436

20222628

31333537

2468

111315

1357

10121416

212325

29 46 43 41

303234

363738394044

45 42

4748495051

20222628

313335

2468

111315

98 3 76

2457

861231

10 10

17 17

21 212325

20 20

2224

19 19

18 18

16 16

1011131415

LAST

CAV A

.109 +_ .015

(3.77 +_ 0.38)

CAV.

JACKPOST 2-56 UNC-2B

TYP.

.186 (4.72) PLUG

.199 (5.05) RECEPTACLE

9-15-21-25 VIEW

*FOR 31: 1.085 (27.56) MAX.

FOR 37: 1.185 (30.10) MAX.

FOR 51: 1.225 (31.12) MAX.

.096 +_ .005

(2.44 +_ 0.31) DIA. TYP

PCB Termination Arrangements (Viewed from bottom of connector, on PCB solder side.)

Indentification number shown for plug connector, use reverse order for socket connector.

.083

(2.11)

.020

(0.51)

.158 (4.00)

.020

(0.51) .020

(0.51)

.183

(4.65)

.108

(2.73)

.050

(1.27)

.108

(2.73)

.100 (2.54)

TYP.

.050 (1.27)

TYP.

.020

(0.51)

.083

(2.11)

.020

(0.51)

.083 (2.11)

.020

(0.51)

9Contacts

15 Contacts

21 Contacts 25Contacts

51 Contacts

37 Contacts

31 Contacts

All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27)

* For jackpost locking add letter "P" or "M7".

NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dipped.

Part Number

By Shell Size

MD*B-9PCBR*

MD*B-9SCBR*

MD*B-15PCBR*

MD*B-15SCBR*

MD*B-21PCBR*

MD*B-21SCBR*

MD*B-25PCBR*

MD*B-25SCBR*

MD*B-31PCBR*

MD*B-31SCBR*

MD*B-37PCBR*

MD*B-37SCBR

MD*B-51PCBR*

MD*B-51SCBR

.788 (20.01)

.938 (23.82)

1.088 (27.63)

1.188 (30.17)

1.338 (33.98)

1.488 (37.79)

1.438 (36.52)

.565 (14.35)

.715 (18.16)

.865 (21.97)

.965 (24.51)

1.115 (28.32)

1.265 (32.13)

1.215 (30.86)

.292 (7.42)

.375 (9.52)

.442 (11.23)

.525 (13.34)

.592 (15.04)

.675 (17.14)

.692 (17.58)

.775 (19.68)

.842 (21.39)

.925 (23.50)

.994 (25.25)

1.075 (27.30)

.942 (23.93)

1.026 (26.06)

.218 (5.54)

.258 (6.55)

.134 (3.40)

.218 (5.54)

.134 (3.40)

.218 (5.54)

.134 (3.40)

.218 (5.54)

.134 (3.40)

.218 (5.54)

.134 (3.40)

.218 (5.54)

.134 (3.40)

.218 (5.54)

.177 (4.50)

.258 (6.55)

.420 (10.67)

.520 (13.21)

.550 (13.97)

.250 (6.35)

.300 (7.62)

.230 (5.84)

.130 (3.30)

.150 (3.81)

Max.

± .005 (0.13)

± .010 (0.25)

Max.

www.ittcannon.com

Dimensions shown in inch (mm)

Micro-D Plastic Shell - .050" Contact Spacing MDB Coaxial

MDB Coaxial Series with Screw Mounting Holes

MDB connectors with two coaxial and five MICRO-

PINTM /MICROSOCKETTM contacts. Crimp-type coaxial

contacts accommodate RG-178/U cables. A plastic

insertion/extraction tool is supplied with each connec-

tor assembly having removable coaxial assembly.

How to Order - MDB Coaxial

SERIES

MDB 1 -7 C2 * ** *S HK

SERIES

Micro-D Coaxial No Letter - Coaxial assembly

installed and nonremovable

RO - coaxial assembly ordered

serparately

RA - Coaxial shipped assembled

but uninstalled

See Standard Wire Termination

Consult customer service

No letter - No hardware

* Not available with removalbe coax cable type

connectors RO and RA.

standard mounting. 091 (2.31) hole diameter

F - Float

K - Jackscrew (standard)

L - Jackscrew (low profile)

P - Jackpost

Code on page 29. Coaxial cable will be

RG-178U unless otherwise specified; length

will be same as wire modification.

P - Pin

S - Socket

L - Uninsulated, solid wire

H - Insulated, solid or stranded

S -Solder pot*

1 - .050 (1.27) centers

...................7

.....................2

SIGNAL CONTACT SPACING

TOTAL CONTACT CAVITIES

NUMBER OF COAXIALS

SIGNAL CONTACT SPACING

TOTAL CONTACT CAVITIES

NUMBER OF COAXIALS

COAXIAL TYPE

SIGNAL CONTACT TYPE

SIGNAL CONTACT LEAD TYPE

SIGNAL CONTACT LEAD LENGTH

MODIFICATION

HARDWARE

MODIFICATION

HARDWARE

RoHS COMPLIANCE

How to Order - Coaxial Cable Assemblies

SERIES

MD CC S * * * *

COAXIAL CABLE

CONTACT TYPE

COAXIAL CABLE TYPE

COAXIAL CABLE LENGTH

SERIES

P - Pin

(used with socket side connection)

S - Socket

(used with pin type connection)

See Standard Wire Termination

Codes on page 29. Coaxial cable will be

RG-178U unless otherwise specified; length

will be the same as wire modfication.

1 - RG178/U

COAXIAL CABLE

RoHS COMPLIANCE

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Micro-D Plastic Shell - .050" Contact Spacing MDB Coaxial

Dimension - MDB Coaxial Series

+ +

Plug

Receptacle

(See page 9 for layouts)

Part Number

by Shell Size

MDB1-7C2P*

MDB1-7C2S*

.510 (12.95)

.602 (15.29)

* Add lead type and length, see Part Number Explanation.

** Weight given is with 7 inch (177.80) insulated leads, #26 AWG silver plated copper pigtails and RG178/U coaxials.

.204 (5.18)

.185 (4.70)

.298 (7.57)

.279 (7.09)

.782 (19.86)

.395 (10.03)

.375 (9.52)

.510 (12.95)

.540 (13.72)

.290 (8.30)

.273 (7.80)

Max.

_ .005 (0.13)

Avg. Weight**

(oz) +_ 5% (gm.)+_ 5%

.190 (4.83) Max.

TWO MTG. HOLES

.091 +_.003 (2.31 +_0.08) DIA.

TWO MTG. HOLES

.091 +_.003 (2.31 +_0.08) DIA.

.250 (6.35) MAX.

EXTENSION FOR

RO AND RA

COAXES

EXTENSION FOR

ROAND RA

COAXES

.625 (15.88)

MAX.

.625 (15.88)

MAX.

.250 (6.35) MAX.

1.000 (25.40) MAX.

Micro-D Plastic Shell - .050" Contact Spacing MD

Mounting Hardware Views (Sizes 9-51)

.178 ± .005

(4.52 ± 0.13)

This hardware supplied unassembled.

Screw Lock Assembly

90˚ Angle Mounting Bracket

Description

Screw Lock Assembly

Jackpost Kit

322-9500-000

320-9505-000

015-9516-000 .100

(2.54)

.122

(3.10)

.257

(6.53)

.215

(5.46)

015-9516-000

Mounting Bracket, 90˚ Angle-

MD*1

for 9 thru 37 Shell Sizes

MD*1

for 51 Shell Size

NOTES: Screw lock assembly (322-9500-000) can be used for front front mounting. Jackpost kit

(320-9505-000) consists of 2 assemblies, shipped unassembled.

Part Number

± .005 (0.13)

Max.

Screw Lock Assembly*

*NOTE: Torque value is 4.0 in/lbs max.

Jackpost - (P)

90˚ Angle Mounting Bracket

.052

(1.32) TYP.

.260

(6.60) MAX.

#2-56

UNC-2B

THD

.096 ± .005

(2.44 ± 0.13)DIA.

.093 (2.36)

RECOMMENDED

PANEL THICKNESS

BUSHING

.182 (4.62)

MAX. .688 (17.48)

MAX.

.408 (10.36)

MAX.

RETAINING

CLIP

LOCK

SCREW

MATING

FACE

CONNECTOR

SHOWN FOR

REF. ONLY

#2-56 UNC-2B

.185 (4.70) MAX.

.500

(12.7)

MAX.

PANEL REF.

.232 (5.89) MAX.

#2-56 UNC-2A

.170

(4.32) MAX.

.014 +_ .004

(0.36 +_ 0.10) ALLOWABLE

DIAMETRAL FLOAT

.020 (0.51) MAX. ALLOWABLE

AXIAL FLOAT

.150 +_ .003

(3.81 +_ .076)

.185 (4.70)

MAX .093

(2.36)

REF.

.090 +_ .0015

(2.29 +_ 0.038)DIA .031 +_ .003

(0.79 +_ 0.08)

MATING

FACE

MATING

FACE

#2-56

UNC-2A

.490

(12.45) MAX

MATING

FACE

CONNECTOR

SHOWN FOR

REF ONLY

HEX HEAD -

.050 (1.27) ACROSS FLATS

.050 (1.27) DEEP (REF)

.155

(3.94) MAX.

PART HAS A .040 (1.02)

MAX. AXIAL FLOAT

#2-56

UNC-2A

Jackscrew - (L) Low Profile

Jackscrew - (K) Standard

Float Mount - (F)

PART HAS A .040 (1.02)

MAX AXIAL FLOAT

CONNECTOR

SHOWN FOR

REF. ONLY

This hardware is factory installed.

Shown here is a cutaway view of the float mount for the MD connector.

The basic shell dimensions are the same for the float mount and the

screw mounting hole configurations. View shown is for standard float

mount front panel mounting. Reverse mounting is available on request.

* NOTE: Torque values are as follows:

Low Profile Jackscrew (L)-2.5 in/lbs

Standard Jackscrew (K)-2.5 in/lbs

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Micro-D Plastic Shell - .050" Contact Spacing MD

Mounting Hardware to Military Specification (Sizes 9 - 51) PER 83513/5-Style

This hardware supplied unassembled.

#2-56 UNC-2A

THREAD TYP.

.361 (9.17)

MAX.

PLUG (REF. WITH

.092 (2.34) DIA.

MOUNTING HOLES

POTTING WELL (REF.)

.010 (0.25)

TH'K (REF.)

Jackscrew - (L) Low profile *

.062 (1.57)

HEX. (REF.)

.010 (0.25)

TH'K (REF.)

#2-56 UNC-2A

THREAD TYP. PLUG (REF.) WITH

.092 (2.34) DIA.

MOUNTING HOLES

POTTING WELL

(REF.)

Allen head

Optional Head Configuration

Plug and Receptacle

Low and High Profile Jackscrew - (K) High Profile

Slotted Head

Jackpost Assembly

Description

Slotted Head Jackscrew Assy Low Profile

Slotted Head Jackscrew Assy High Profile

Allen Head Jackscrew Assy Low Profile

Allen Head Jackscrew Assy High Profile

Jackpost Assy

-05

-06

-02

-03

-07

320-9508-025

320-9508-027

320-9508-026

320-9508-028

320-9505-033

M83513/5-Style

Mode Code Part Number

.125 (3.18) HEX

#2-56 UNC-2B Thread

.190 (4.83)

+_ .185 (4.70)

.062 (1.57)

± .010 (0.25)

.475 (12.06)

± 0.25 (0.64)

LOCK WASHER

RETAINING NUT

.154 (3.91) HEX. # 2-56 UNC-2A

Thread

Jackpost Bushing (For Rear Panel Mounting)

#2-56 UNC

2A THD

#2-56 UNC 2B THD

MATING FACE

.126 (3.20)

.125 (3.18)

DIA.TYP.

27˚/26˚TYP

.075 (1.91) + .005 (0.13)

- .000 (0.00)

R TYP.

.170 (4.32)

.185 (4.70)

.500 (12.7)

.480 (12.19)

HEX IS .135 (3.431/.115 (2.92) ACROSS FLATS

3/32 (2.4)

1/16 (1.6)

3/64 (1.2)

1/32 (0.8)

.092/.087 (2.34/2.21)

.061/.056 (2.34/1.42)

.047/.042 (1.19/1.07)

.030/.025 (0.76/0.64)

320-9505-007

320-9505-006

320-9505-005

320-9505-004

.379 ( 9.63)

.529 (13.44)

.679 (17.25)

.779 (19.79)

.929 (23.60)

1.079 (27.41)

1.029 (26.14)

.219 (5.56)

.261 (6.63)

.565 (14.35)

.715 (18.16)

.865 (21.97)

.965 (24.51)

1.115 (28.32)

1.265 (32.13)

1.215 (30.86)

*2Jackposts, 2 nuts, 2 washers.

Panel

Thickness

Dim.

Jackpost Kit

Number* A

+.004 (0.10)

-.000 (0.00)Shell Size

Plug and Receptacle Dimensions

+.004 (0.10)

-.000 (0.00)

+_.005(0.13)

NOTE: Torque value for jackpost 2.5 in/lbs

Panel Mounting Dimensions

.200 ±.005

(5.08 ±0.13)

Plug and Receptacle

Rear Mounted

Plug and Receptacle

Front Mounted

Plug Front Mounted

Receptacle Rear Mounted

.395 ±.005

(10.03 ±0.13)

.300 ±.005

(7.62 ±0.13)

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

Micro-D Plastic Shell - .050" Contact Spacing MD

Panel Cutouts

++++

Figure 1

Front Mounting

TYP.

A.015 (0.38)R.

MAX.(TYP)

FULL R.

(TYP. )

.075 (1.91) + .005 (0.13) R TYP

-.000 (0.00)

FULL R. (TYP. )

26˚/27˚TYP

Figure 2

Rear Mounting

.450 ±.002

(11.43 ±0.05)

FULL R.

(TYP. )

.030 (0.76) TYP.

PANEL REF.

Figure 3

Edgeboard Mounting

NOTES:

.409 (10.39)

.379 ( 9.63)

.559 (14.20)

.529 (13.44)

.709 (18.00)

.679 (17.25)

.809 (20.55)

.779 (19.79)

.959 (24.36)

.929 (23.60)

1.109 (28.17)

1.079 (27.41)

1.059 (26.90)

1.029 (26.14)

.172 (4.37)

.219 (5.56)

.172 (4.37)

.219 (5.56)

.172 (4.37)

.219 (5.56)

.172 (4.37)

.219 (5.56)

.172 (4.37)

.219 (5.56)

.172 (4.37)

.219 (5.56)

.215 (5.46)

.261 (6.63)

.570 (14.48)

.720 (18.29)

.870 (22.10)

.970 (24.64)

1.120 (28.45)

1.270 (32.26)

1.220 (30.99)

.089 (2.26)

+ .004 (0.10)

- .000 (0.00)

+ .004 (0.10)

- .000 (0.00)

+ .005 (0.13)

- .000 (0.00)

+ .005 (0.13)

- .000 (0.00)

Cutout

Figure

Size

Front mounting (figure 1) and rear mounting (figure 2) accommodates #2-56 screws.

Front mounting is preferred. However, when rear mounting is necessary. use detail on previous page.

Edgeboard mounting bracket (figure3) uses #2-56 screws. Dimension .450 ± .002 (11.43 ± 0.05) locates the

MD receptacle flush with the end of the board.

Plug MD Glass-filled Diallyl Phthalate

Plastic Insulator MDV Glass-filled Polyester

Plastic Insulator

Solder Pot

Receptacle

.022 (0.56)

MAX.

.022 (0.56)

MAX.

.093 ± .005

(2.36 ± 0.13)

.093 ± .005

(2.36 ± 0.13)

.130

(3.30)

MAX.

.210

(5.33)

.204 (5.18)

MAX.

.185 (4.69)

MAX.

.375 (9.52)

MAX.

.356 (9.04)

MAX.

.065 (1.65)

MAX.

.065 (1.65)

MAX.

.170

(4.32)

.170

(4.32)

MAX.

PCB ordering information - page 30

SERIES-INSULATOR STYLE-MATERIAL

MD - Clip mounting -Diallyl phthalate

MDV - Clip mounting-Polyester

H- Insulated solid or stranded wire

L - Uninsulated solid wire

S - Solder pot to accept #26 AWG max.

harness wire.

No designator - No hardware - standard mounting

.091 (2.31) hole diameter

Not available in clip mounting.

See page 79 and 81for additional codes.

(H) 001 - 18", 7/34strand,#26 AWG,

MIL-W-16878/4, Type E Teflon, Yellow.

(H) 003 - 18", 7/34strand,#26 AWG,

MIL-W-16878/4, Type E Teflon,color

coded to MIL-STD-681 System I.

(L) 1 - 1/2"uninsulated solid #25AWG gold plated copper.

(L) 2 - 1"uninsulated solid #25AWG gold plated copper.

1 - .050 (1.27) centers

9-15-21-25-31*-37-51. See page 7

P- Pin S - Socket

CONTACT SPACING

CONTACT ARRANGEMENT

CONTACT TYPE

CONTACT SPACING

CONTACT ARRANGEMENT

CONTACT TYPE

TERMINATION TYPE

TERMINATION CODE**

TERMINATION CODE

LOCKING HARDWARE

MD 1-9PH001P

RoHS COMPLIANCE

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Micro-D Plastic Shell - .050" Contact Spacing MD/MDV

Part Number by Shell Size

MD1-9P**

MD1-9S**

MD1-15P**

MD1-15S**

MD1-21P**

MD1-21S**

MD1-25P**

MD1-25S**

MD1-37P**

MD1-37S**

MD1-51P**

MD1-51S**

MDV1-9-P**

MDV1-9S**

MDV1-15P**

MDV1-15S**

MDV1-21P**

MDV1-21S**

MDV1-25P**

MDV1-25S**

MDV1-37P**

MDV1-37S**

MDV1-51P**

MDV1-51S**

Max.

Avg. Weight***

±5% (oz.)/±5% (gm.)

.512 (13.00)

.662 (16.81)

.812 (20.62)

.912 (23.16)

1.212 (30.78)

1.162 (29.51)

Add lead type and length, see Part Number Explanation. Weight given is with 1/2", uninsulated solid #25 AWG gold plated copper pigtails.

** ***

.292 (7.42)

.376 (9.55)

.442 (11.23)

.526 (13.36)

.592 (15.04)

.676 (17.17)

.692 (17.58)

.776 (19.71)

.992 (25.20)

1.076 (27.33)

.942 (23.93)

1.026 (26.06)

.405 (10.29)

.555 (14.10)

.705 (17.91)

.805 (20.45)

1.105 (28.07)

1.055 (26.80)

.170 (4.32)

.213 (5.41)

.215 (5.46)

.258 (6.55)

.026 (0.73)

.038 (1.10)

.035 (1.00)

.053 (1.50)

.050 (1.40)

.063 (1.80)

.056 (1.60)

.086 (2.45)

.076 (2.15)

.109 (3.10)

.093 (2.65)

How to Order

With Clip Mounting Slots

Micro-D Plastic Shell - .050" Contact Spacing MD**

Panel Mounting Hardware

Clip Mounting

Description

Dimensions (Clip Mounting Only)

Coupling Retention Clip

(see Figure 2)

Mounting Screw Brackets

(see Figures 1 and 3)

Panel

Mounting Key

Edgeboard Mounted

(see Figure 4)

Plug and Receptacle

Rear Mounted

Plug and Receptacle

Front Mounted

Plug Front Mounted

Receptacle Rear Mounted

Part Number

201-9100-000

294-9100-000

015-9100-000

015-5009-000

MD51428-1

Panel Mounting Key

Mounting Key and Coupling Clip Assembly

Mounting Screw Bracket

Edgeboard Mounting Bracket

Edgeboard Mounting Bracket and

Coupling Clip Assembly

Must be ordered separately; specify left and right hand for complete

assembly.

.200 ± .005 (5.08 ± 0.13) .330 ± .005

(8.38 ± 0.13) .265 ± .005 (6.73 ± 0.13)

Must be ordered separately; assembly contains set of left and right

hand types.

Illustrated is therecommended method of front mounting

with metal panel mounting keys. Panel mounting keys are

available with or without coupling retention clips.

For front mounting, place therear of theconnector thru

thepanelcutout. With themountingflangeagainst the

panel,fullyinsert the panelmountingkeysthru the slots

in theflange and thruthepanelcutout.Retainingthe

keys in this position, bend them outward against the rear

ofthepanel.Whenmatingafront mountedconnector

withanunmountedconnector, a couplingretention clip

assembly may be used to securely lock the two together.

Mountingscrew brackets are available and may be used

instead of the panel mounting keys.

Panel Cutouts

Figure 1

Figure 3

Rear Mounting

Figure 4

Edgeboard Mounting

Figure 2

Front Mounting

FULL R. (TYP.)

.015 (0.38)R.

MAX. (TYP.)

.075 + .005 - .000

(1.91 + 0.13 _ 0.00)

.182 + .004 - .000

(4.62 + 0.10 - 0.00)

PANEL REF.

.018 + .002 - .000

(0.46 + 0.05 - 0.00)

.005 (0.13) MAX.

R. (TYP.)

26˚/27˚ TYP.

.015 (0.38)R.

MAX. (TYP.)

Apanel thickness of 1/8" (3.17mm) maximum is recommended for ease of tab bending

when a panel mounting key & clip assembly or edgeboard mounting brackets are used.

Front mounting is preferred. However, when rear mounting is necessary, use figure 3 for

dimensions.

Figure 4 is for edge board mounting bracket or edgeboard clip assembly. The .184 +_ .002

(2.67 +_ 0.05) dimension locates the MD socket insulator flush with the end of the board.

Screw brackets (015-9100-000) will accommodate #2-56 screws.

Front mounting(Figure 1) andrearmounting(Figure 3) accommodate#2-56screws.

Shell

Size

.408 (10.36)

.378 ( 9.60)

.400 (10.16)

.588 (14.94)

.528 (13.28)

.550 (13.97)

.738 (18.75)

.678 (17.27)

.700 (17.78)

.838 (21.29)

.778 (19.76)

.800 (20.32)

1.138 (28.91)

1.078 (27.38)

1.100 (27.94)

1.088 (27.64)

1.028 (26.11)

1.050 (26.67)

.172 (4.37)

.217 (5.51)

.091 (2.31)

.172 (4.37)

.217 (5.51)

.091 (2.31)

.172 (4.37)

.217 (5.51)

.091 (2.31)

.172 (4.37)

.217 (5.51)

.091 (2.31)

.172 (4.37)

.217 (5.51)

.091 (2.31)

.215 (5.46)

.260 (6.60)

.091 (2.31)

.650 (16.51)

.795 (20.19)

.945 (24.00)

1.045 (26.54)

1.345 (34.16)

1.295 (32.89)

.089 (2.26)

Cutout

Figure

+ .004 (0.10)

- .000 (0.00)

+ .004 (0.10)

- .000 (0.00)

+ .004 (0.10)

- .000 (0.00)

+ .005 (0.13)

- .000 (0.00)

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Micro Center Jackscrew MJS

How to Order

The MJS jackscrew series provides a reliable interconnect for board-to-board,

board-to-cable and in-line cable-to-cable applications. Layouts accommodating

up to 76 MICROPIN/MICROSOCKETTM contacts are available, with the same

wide range of options as are offered with the other MICRO Line products offered

in this catalog.

SERIES

INSULATOR MATERIAL

CONTACT ARRANGEMENT

CONTACT TYPE

TERMINATION TYPE

TERMINATION CODES

SERIES CONTACT TYPE TERMINATION CODE*

MJS 26 P H 001* -

TERMINATION TYPE

INSULATOR MATERIAL

B - Diallyl phthalate

V - Polyester

U- Polyetherimide

R - Polyphenylene sulfide

MJS - Micro Center Jackscrew

* See Termination Codes shown below.

P - Pin

S - Socket

(H) 001

(H) 003

(L) 1

(L) 2

- 18" , 7/34 strand, #26 AWG,

MIL-W-16878/4, Type E Teflon,

yellow.

- 18", 7/34 strand, #26 AWG,

MIL-W-16878/4, Type E Teflon,

color coded to MIL-STD-681

System I.

- 1/2" uninsulated solid #25

AWG gold plated copper.

- 1" uninsulated solid #25 AWG

gold plated copper.

H - Insulated wire harness.

I - Integral tail (MJSV-28S only).

L - Solid - uninsulated wire.

S - Solder pot to accept #26 AWG

harness wire.

T - Thru bundle pigtail (MJSV-28P only).

Unshrounded Receptacle: 10, 26, 51, 66

Shrouded Receptacle; 10, 26, 34, 38, 42, 76

Low Profile Plug and Receptacle

(shrouded): 28

CONTACT ARRANGEMENTS

RoHS COMPLIANCE

Standard Wire Termination Codes

The following termination codes are listed for your information. For additional codes please refer to Appendix on page 79 and 81. All wire lengths are minimum.

Harness Type (H)

#26 AWG per MIL-W-16878/4 Type ETeflon,7/34 stranded.

Solid UninsulatedType (L)

#25AWG gold plated solid copper.

Length

3(76.2)

6(152.4)

8(203.2)

10 (254.0)

12(304.8)

18 (457.2)

20 (508.0)

H 020

H 019

H 026

H 029

H 028

H 001

H 038

H 027

H 016

H 034

H 025

H 002

H 003

H 023

24 (609.6)

30 (762.0)

36 (914.4)

48(1219.2)

72(1828.8)

120 (3048.0)

H 009

H 010

H 011

H 013

H 017

H 042

H 004

H 005

H 006

H 048

H 046

H 041

L61

L56

L57

L39

L58

L14

L16

L10

.125(3.18)

.150 (3.81)

.190 (4.83)

.250 (6.35)

.375(9.53)

.500 (12.70)

.750 (19.05)

1.000 (25.40)

1.500 (38.10)

2.000 (50.80)

2.500 (63.50)

3.000 (76.20)

All YellowColorCodedLength Termination

CodeLength

Termination

CodeLength

All YellowColorCoded

Contact Arrangements

Face view of pin-use reverse order for socket

Identification numbers are for reference only and do not appear on connectors. *Low profile configuration

**MJSV & MJSR

10 Contacts

26 Contacts 16 Contacts** 28 Contacts**

34 Contacts

MJSV (shrouded)

66 Contacts

MJSB/MJSU (unshrouded)

51 Contacts

Micro Center Jackscrew MJS

Unshrouded Receptacle (10-26-51-66)

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

MJSB/MJSU

Rear View

UNSHROUDED

STANDARD MATERIALS AND FINISHES

Micropin

Microsocket

Insulator

Copper alloy, 50 miro-inch gold

Copper alloy, 50 micro-inch gold

Stainless steel, passivated & lubricated

Stainless steel, passivated

Diallyl phthalate, green color

or polyetherimide, natural color

Jackscrew

Retainer, Jackscrew

Insert, Threaded

Post, Polarizing

.145 (3.68)

DIA.

MAX.

.055 (1.40) TYP.

.050 (1.27) TYP.

Part Number

MJSB or MJSU-10P

MJSB or MJSU-10S

MJSB or MJSU-26P

MJSB or MJSU-26S

MJSB or MJSU-51P

MJSB or MJSU-51S

MJSB or MJSU-66P

MJSB or MJSU-66S

.378 (9.60)

.778 (19.76)

1.028 (26.11)

1.280 (32.51)

.190 (4.83)

.260 (6.60)

.290 (7.37)

.690 (17.53)

.940 (23.88)

1.190 (30.23)

Max.

Bsc.

.126 ± .005

(3.20 ± 0.13)

.170 ± .010 (4.32 ± 0.25)

1-64 UNC-2A

THREAD

.170 (4.32)

MAX.

.110 MAX.

(2.79)

1-64 UNC-2B

THREAD

.332 (8.43)

MAX.

POLARIZING PIN (OPTIONAL WITH LOSS OF CONTACT)

Receptacle Plug

Shrouded Receptacle (16-28*-34)

MJSV/MJSR

.285 (7.24)

MAX.

.080 (2.03)

.065 (1.65)

.285 (7.24) MAX. B

1-64 UNC-2B

THREAD

1-64 UNC-2A

THREAD

.205 (5.21) MAX.

.090 ± .010

(2.29 ± 0.25)

.110 (2.79) MAX.

.145

(3.68)

DIA. MAX.

Face View

Face View Receptacle

Plug

SHROUDED

STANDARD MATERIALS AND FINISHES

Micropin

Microsocket

Insulator

Copper alloy, 50 miro-inch gold

Copper alloy, 50 micro-inch gold

Part Number

MJSV or MJSR-16P

MJSV or MJSR-16S

MJSV-28P* or MJSR-28P*

MJSV-28S* or MJSR-28S*

MJSV-34P or MJSR-34P

MJSV-34S or MJSR-34S

.700 (17.78)

1.020 (25.91)

1.180 (29.97)

*Low profile configuration, for "L" (uninsulated solid wire) termination add .090 (2.29) to the "B" dimension.

For "H" (insulated wire) termination add .200 (5.08) to the "B" dimension. For special configurations

with backpotted standoffs consult factory.

.345 (8.76)

.320 (8.13)

.232 (5.89)

.246 (6.25)

.330 (8.38)

.305 (7.75)

.545 (13.84)

.865 (21.97)

1.025 (26.04)

.175 (4.45)

.062 (1.57)

.160 (4.06)

Max.

Ref.

± .006 (0.15)

Stainless steel, passivated

Polyester, black color

Polyphenylene sulfide, black color

Jackscrew

Retainer, Jackscrew

Insert, Threaded

Post, Polarizing

www.ittcannon.com

Micro Center Jackscrew MJS

Shrouded Receptacle (42)

MJSR-42P A

1.322

(33.58)

REF.

.125

(3.18)

TYP.

CAV. #1

.075

(1.91)

TYP.

#1 (.073) - 64 UNC-2B

THREADED INSERT

.035 (0.89)

.015 (0.38)

TYP.

CAV. #31

.100

(2.54)

TYP.

.297

(7.54)

REF.

.420

(10.67)

MAX.

CAV #42

1.328

(33.73)

REF.

.125

(3.18)

TYP. .100

(2.54)

TYP.

CAV

# 1

CAV. 42

1/16 SOCKET HEAD JACKSCREW

#1 (.073 - 64 UNC - 2A THREAD

.131 (3.33)

.121 (3.07) TYP

.145 (3.68)

DIA. MAX. .108

(2.74) MAX.

.075 (1.91)

TYP.

.303

(7.70)

REF.

.420

(10.67)

MAX.

MJSR-42S

Part Number

Max.

Ref.

±.006 (0.15)

MJSR-42P

MJSR-42S

1.445 (36.70)

.345 (8.76)

.357 (9.07)

1.250 (31.75)

.142 (3.61)

STANDARD MATERIALS AND FINISHES

Micropin

Microsocket

Insulator

Jackscrew

Retainer, Jackscrew

Insert, Threaded

Copper alloy, 50 miro-inch gold

Copper alloy, 50 micro-inch gold

Polyphenylene sulfide, black color

Stainless steel, passivated

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Micro Center Jackscrew MJS

Shrouded Receptacle (76)

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

MJSR-76P

#2 (0.86) - 64 UNC-2B

THREADED INSERT

1.472

(37.39)

REF.

CAV.

.100 (2.54) TYP.

.075

(1.91)

TYP.

CAV. #76 CAV. #62

.447

(11.35)

REF.

.570

(14.48)

MAX.

.035 (0.89)

.015 (0.38)

TYP.

CAV. #13

++ ++

+++

.570

(14.48)

MAX.

.453

(11.51)

TYP.

.075

(1.91)

TYP.

.100 (2.54)

TYP.

1.478 (37.54) TYP.

CAV. #1

1/16 SOCKET HEAD JACKSCREW

#2 (.086 - 64 UNC - 2A THREAD .131 (3.33)

.121 (3.07) TYP

.160

(4.06)

MAX.

.150 (3.81)

MAX.

MJSR-76S

Part Number

Max.

Ref.

±.006 (0.15)

MJSR-76P

MJSR-76S

1.595 (40.51)

.345 (8.76)

.357 (9.07)

1.400 (35.56)

.142 (3.61)

CAV. #62 CAV. #76

CAV. #13

STANDARD MATERIALS AND FINISHES

Micropin

Microsocket

Insulator

Jackscrew

Retainer, Jackscrew

Insert, Threaded

Copper alloy, 50 miro-inch gold

Copper alloy, 50 micro-inch gold

Polyphenylene sulfide, black color

Stainless steel, passivated

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Micro Center Jackscrew MJS

Plug (Molded-In Insert - Special)

MJSV**P

MJSV-26P**

(Shown)

Part Number

MJSV-26P**

MJSV-38P**

.868 (22.05)

1.168 (29.67)

Ref.

.100 (2.54)

INSERT

#1-64 UNC-2B

INSULATOR

MAX.

ENGAGING FACE

.300 (7.62)

MAX.

.061 (1.55)

MAX.

.109 (2.77)

MAX. DIA.

LEAD

LENGTH

MICRO-PIN

CONTACT

.162 (4.11)

REF.

CAVITY # 1

Receptacle (Special)

MJSV-26S**

(Shown)

Part Number

MJSV-26S**

MJSV-38S**

.943 (23.95)

1.243 (31.57)

.874 (22.20)

1.174 (29.82)

Max.

Ref.

.167 (4.24)

REF.

.100 (2.54)

REF.

.253 (6.43)

MAX.

.320 (8.13)

MAX.

.155 (3.94)

MAX.

#1-64 UNC-2A

MICRO-SOCKET

.190 (4.83)

REF.

LEAD

LENGTH

JACKSCREW

MJSV**S*

CAVITY # 1

Contact Arrangements

.075 (1.91) .050 (1.27)

.100 (2.54)

Identification numbers are for reference and do not appear on connectors.

.050 (1.27)

TYP.

26 Contacts

.050 (1.27)

TYP.

.075 (1.91)

.100 (2.54)

REF.

38 Contacts

Face view of pin - use reverse order for socket

Microminiature Circular - .050" Contact Spacing MICRO-K

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

MICRO-K microminiature circular connectors

are rugged yet lightweight - and are designed

to be comparable to MIL-DTL-83513.

Applications include biomedical,

instrumentation and miniature black boxes.

MIK: Accommodate up to 55 contacts on .050

(1.27) centers (equivalent to 420 contacts per

square inch). Five keyway polarization prevents

cross plugging. The threaded coupling nuts

provide strong, reliable coupling. MIK recepta-

cles can be either front or back panel mounted;

in back mounting applications, panel thickness

of up to 3/32" can be used on the larger sizes.

Maximum temperature range - 55˚C to + 125˚C.

Standard MIK connectors are available in two

shell sizes accommodating two contact

arrangements pre-wired to your specific

requirements.

MIKM: Similar to our MIK, except has a steel

shell and receptacle for improved ruggedness

and RFI resistance. It accommodates up to 85

twist pin contacts. Maximum temperature

range - 55˚C to + 125˚ C.

MIKQ: Aquick disconnect metal shell and

receptacle version that can be instantaneously

disconnected yet provides a solid lock when

engaged. Applications include commercial TV

cameras, portable

radios, military gun sights, airborne landing

systems and medical equipment. Maximum

temperature range - 55˚C to +125˚C.

Specifications

STANDARD MATERIAL AND FINISHES ELECTRO/MECHANICAL FEATURES

*For plug only

Electrodeposited for receptacle.

MIK

Thermoplastic

Stainless Steel

Passivated

Glass-reinforced

Thermoplastic

50 Microinch

Gold Plated

Copper Alloy

Stainless Steel

Passivated

Glass-reinforced

Thermoplastic

50 Microinch

Gold Plated

Copper Alloy

Brass

Brass, Electroless

Nickel Plated*

Glass-reinforced

Thermoplastic

50 Microinch

Gold Plated

Copper Alloy

No. of Contacts

Wire Size

Contact Termination

Contact Rating

Couping

Polarization

Contact Spacing

Shell Styles

7,55

#24 AWG

thru #32 AWG

Crimp

3 Amps

Threaded

Keyways

.050 (1.27)

Centers

0-Wall Mtg.

6-Straight Plug

7,55, 85

#24 AWG

thru #32 AWG

Crimp

3 Amps

Threaded

Keyways

.050 (1.27)

Centers

0-Wall Mtg.

6-Straight Plug

7,19, 37

#24 AWG

thru #32 AWG

Crimp

3 Amps

Push/Pull

Keyways

.050 (1.27)

Centers

7-Jam Nut

6-Straight Plug

9-Rear Panel

Mtg. Receptacle

Shell

Coupling Nut

Insulator

Contacts

MIKM MIKQ MIK MIKM MIKQ

How to Order

SERIES

MIK M 6- 55 P * * * * * *

SERIES

MIK: Microminiature Circular 7, 19, 37, 55, 85 (H) 001 - 18", 7/34 strand, #26 AWG,

MIL-W-16878/4, Type E Teflon,

yellow.

18",7/34 strand, #26 AWG,

MIL-W-16878/4, Type E Teflon,

color coded to MIL-STD-681

System I.

1/2" uninsulated solid #25

AWG gold plated copper.

1" uninsulated solid #25 AWG

gold plated copper.

(H) 003 -

(L) 1 -

(L) 2 -

G - Cable nut and grip (MIKQ plug only)

N - Nut only (MIKQ plug only)

NOTE: Contact types cannot be interchanged

between shell styles.

P - Pin

S - Socket

H - Insulated round hook-up wire

L - Uninsulated round solid wire

No Letter - Screw couping, plastic shell

M - Screw coupling, metal shell

Q - Push/Pull, metal shell

0 - Wall mounting receptacle (MIK and

MIKM only)

6 - Straight plug (MIK, MIKM and MIKQ)

7 - Jam nut mount (MIKQ only)

9 - Rear panel mounted receptacle (MIKQ)

CONNECTOR TYPES

SHELL STYLES

CONNECTOR TYPE

SHELL STYLE

CONTACT ARRANGEMENT

CONTACT ARRANGEMENTS

CONTACT TYPE

TERMINATION TYPE

TERMINATION TYPES

TERMINATION LENGTH CODE

TERMINATION LENGTH CODE (STANDARDS)

HARDWARE

RoHS COMPLIANCE

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Microminiature Circular - .050" Contact Spacing MIK

Standard Wire Termination Codes

The following termination codes are listed for your

information. For additional codes please refer to

Appendix on page 79 and 81. All wire lengths are

minimum.

HARNESS TYPES (H)

#26 AWG per MIL-W-16878 Type E, Teflon Stranded

Length

020

019

026

029

028

001

038

009

010

011

013

017

042

027

016

034

025

002

003

023

004

005

006

048

046

041

3 (76.2)

6(152.4)

8(203.2)

10 (254.0)

12(304.8)

18(457.2)

20 (508.0)

24 (609.6)

30 (762.0)

36(914.4)

48(1219.2)

72(1828.8)

120 (3048.0)

-All YellowColorCoded

Contact Arrangements

Face View, Pin Side-(Male Twist Pin Contacts)

MIK/MIKM/MIKQ

7 Contacts

MASTER KEY (TYP)

67 74

82 85

10 16

17 24

25 31

32 39

4046

4752

53 55

10 15

16 22

23 28

29 33

34 37

1917

MIKQ

19 Contacts

MIKQ

37 Contacts

MIK/MIKM

55 Contacts

MIKM

85 Contacts

Cavity identification numbers are for reference only, they do not appear on connectors.

Shell Dimensions

DIA.

LA THD.

.335 (8.51)

Max.

H (TYP.)

KA THD

DIA.

H (TYP.)

DIA.

A THD.

MIK (Rear Panel Mount Thickness - see Tabulation "T") Weight given is 1/2" uninsulated, solid #25 AWG gold plated copper pigtails

PlugReceptacle

Shell Size7only

Receptacle

Shell Size55 only

Plug

Part Number

by Shell Size

MIK6-7P

MIK6-55P

Thread

Max.

Avg. Weight

oz. (gm.) ±5%

5/16-24UNF-2B

9/16-24UNF-2A

.375 (9.52)

.755 (19.18)

.315 (8.00)

.460 (11.68)

.054 (1.54)

.202 (5.72)

Part Number

by Shell Size

MIK0-7S

MIK0-55S

Thread

± .010 (0.25)

Max.

± .003 (0.08)

± .010 (0.25)

Max.

± .005 (0.13)

Max.

Avg. Weight

oz. (gm.) ± 5%

5/16-24UNF-2B

9/16-24UNF-2A

.325 (8.26)

.625 (15.88)

.315 (8.00)

.440 (11.18)

.078 (1.98)

.089 (2.26)

.062 (1.57)

.100 (2.54)

.355 (9.02)

.495 (12.57)

.460 (11.68)

.580 (14.73)

.630 (16.00)

.760 (19.30)

.032 (0.81)

.062 (1.57)

.022 (.635)

.134 (3.81)

Receptacle

Microminiature Circular - .050" Contact Spacing MIKM/MIKQ

Shell Dimensions (Continued)

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

MIKM (Rear Panel Mount Thickness .335 (8.51) max. - see Tabulation "T")

LATHD.

DIA.

.3 35 (8 .51)

Max.

H (TYP.)

KATHD

ATHD ATHD

DIA. D

DIA.

Plug Receptacle

Shell Size 7 only

Receptacle

Shell Size 55 & 85

Plug

MIKM6-7P 5/16-24UNF-2A .375 (9.52) .315 (8.00) .054 (1.54)

MIKM6-55P 5/8-24UNEF-2B .775 (19.18) .440 (11.18) .333 (9.44)

MIKM6-85P 11/16-24UNEF-2B .860 (21.84) .460 (11.68) .419 (11.88)

MIKM0-7S 5/16-24UNF-2A .325 (8.26) .320 (8.13) .078 (1.98) .062 (1.57) .400 (10.16) .460 (11.68) .630 (16.00) .032 (0.81) .051 (1.45)

MIKM0-55S 5/8-24UNEF-2A .625 (15.88) .440 (11.18) .091 (2.31) .062 (1.57) .490 (12.45) .580 (14.73) .760 (19.30) .125 (3.18) .269 (7.62)

MIKM0-85S 11/16-24UNEF-2A .745 (18.92) .440 (11.18) .091 (2.31) .062 (1.57) .490 (12.45) .674 (17.12) .845 (21.46) .125 (3.18) .346 (9.80)

Part Number

by Shell Size

Part Number

by Shell Size

Thread

Max.

Avg. Weight

oz. (gm.)+_5%

Thread D

Max.

+_ .003 (0.08) K

Max.

+_ .005 (0.13)

Max.

Avg. Weight

oz. (gm.)+_5%

MIKQ6-7S .385 (9.78) .305 (7.75) .180 (4.57) .214 (6.08)

MIKQ6-19S .515 (13.08) .405 (10.29) .260 (6.60) .376 (10.70)

MIKQ6-37S .760 (19.30) .635 (16.13) .350 (8.89) .714 (20.23)

MIKQ6-7S .510 (12.95) .245 (6.22) .359 (9.12) 3/8-32UNEF-2A .128 (3.63)

MIKQ7-19P .575 (14.60) .345 (8.76) .470 (11.94) 1/2-28UNEF-2A .214 (6.08)

MIKQ7-37P .855 (21.71) .520 (13.20) .740 (18.80) 3/4-20UNEF-2A .300 (8.52)

MIKQ (Front Panel Mounting Type Shown-.093 (2.36) Thickness)

DIA. .760

(19.30) MAX.

DIA.

1.20

(30.48) MAX.

FOR SIZE 37 ONLY

DIA.

.950 (24.13) MAX.

NUT

MASTER KEY

.093 (2.36) REF.

.043±.005

(1.09±0.13)

D THD.

C DIM.

ACROSS FLAT

.495 (12.67) MAX.

Plug

Receptacle

*Std. Conn. not supplied with Cable Nut & Grip, See Mod Codes. Lanyard Relase Is Available. Consult factory.

Part Number

by Shell Size

MAX.

Ref.

Avg. Weight

oz. (gm.)±5%

Part Number

by Shell Size

MAX.

Thread

Avg. Weight

oz. (gm.)±5%

Front Panel Mounting-MIKQ7

MIKQ Front Panel Mounting

DIA.

MIKQ7-7P .364 (9.24) .390 (9.91)

MIKQ7-19P .475 (12.06) .515 (13.08)

MIKQ7-37P .740 (18.78) .755 (19.17)

Shell Size A

± .005 (0.13)

DIA.

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Microminiature Circular - .050" Contact Spacing MIKQ

Shell Dimensions (Continued)

MIKQ9-7P (Back Panel Mounting)

MIKQ9-19P (Back Panel Mounting)

MIKQ9-37P (Back Panel Mounting)

MIKQ Rear Panel Mounting

Receptacle

Rear Panel Mounting-MIKQ9

Shell Size

MIKQ9-7P

MIKQ9-19P

MIKQ9-37P

.425 (10.76)

.535 (13.58)

.740 (18.78)

DIA.

.885 MAX.

(22.48 MAX.)

.730 ± .010

(18.54 ± 0.25)

.625 ± .010

(15.87 ± 0.25) DIA.

.525 ± .010

(13.33 ± 0.25)

KEY

.415 ± .010

(10.54 ± 0.25)

.570 (14.48)

DIA. MAX.

.485 (12.32)

MAX.

.250 ± .010

(6.35 ± 0.25)

.043 ± .005

(1.09 ± 0.13)

.245 (6.22)

DIA. MAX.

WIRE

EXTENSION

LENGTH

INSULATOR

SHELL

7/16-28 UNEF-2A

.250 ± .010 (6.35 ± 0.25)

9/16-24 UNEF-2A THREAD

.485 (12.32) MAX.

5/8

HEX-NUT

.043 ± .005 (1.09 ± 0.13)

INSULATOR

.345 (8.76)

DIA. MAX.

3/4-20 UNEF-2A THREAD

13/16 HEX NUT

SHELL

.250 ± .010

(6.35 ± 0.25) .043 ± .005

(1.09 ± 0.13) .505 MAX.

(12.83 MAX.)

.665 MAX.

(16.89) MAX.

INSULATOR

.490 MAX.

(12.45 MAX.)

.440 (11.18)

.564 (14.33)

.755 (19.17)

± .005 (0.13)

Dia.

.425

(10.79 )

+.015

-.000

+0.30

-0.00

1/2

HEX-NUT

Microstrips .050" Contact Spacing MT

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

The Cannon Microstrips provide an extremely

dense and reliable interconnection solution in

aminimum profile package, giving great appli-

cation flexibility. Available with latches or

guide pins, Microstrips are frequently found in

board-to-wire applications where high reliabili-

ty is a primary concern.

Three termination styles are available: solder

cup, pigtail, harness, or printed circuit leads.

The MicroPin Contact System assures maxi-

mum performance in a minimum package.

Product Features

• High Performance MicroPin Contact System

• High-density .050” contact spacing

• Pre-wired for ease of installation

• Fully potted wireterminations

•Guide pins for alignment and polarizing

• Quick-disconnect latches

•3Amp current rating

• Precision crimp terminations

• Solder cup, pigtail or printed circuit terminations

• Surface mount leads

Specifications

Current Rating 3Amps max

Dielectric Withstanding Voltage 900 VAC @ sea level; 300 VAC @ 70,000 feet altitude

Insulation Resistance 5000 megohms min.

Contact Resistance 8milliohms max.

Operating Temperature MTV polyester -56°C to +125°C; MTB diallyl phthalate -55°C to +150°C

Durability 500 cycles min.

Shock/Vibration 50 G’s/20 G’s

Connector Mating Force (8 oz.) x (# of contacts)

Latch Retention 5lbs. min.

Wire Size #26 AWG insulated wire, #25 AWG uninsulated solid wire. MT strips will also accommodate #24 AWG through #32 AWG.

For other wiring options contact the factory for ordering information.

General Performance requirements are designed to be comparable to MIL-DTL-83513

Materials and Finishes

Insulator MTV:Glass-filled polyester per MIL-M-24519; MTB: Glass-filled diallyl phthalate per MIL-M-14

Contact Copper Alloy per 83513-Style

Contact Finish 50 Microinches Min. Gold Plated per MIL-G-45204

Insulated Wire #26 AWG. 19/38 Stranded, silver-plated copper,TFE Teflon insulation per MIL-W-16878/4

Uninsulated Solid Wire #25 AWG gold-plated copper per QQ-W-343

Potting Material/Contact Encapsulant Epoxy

Latch 300 series stainless steel, passivated

MicroPin Contact System

The Cannon MicroPin Contact System offers

uncompromised performance in downsized

interconnects. The beryllium copper pin contact is

fully recessed in the insulator, assuring positive

contact alignment and robust performance. The

socket contact is precision machined from high

strength copper alloy and features a smooth lead-in

chamfer.

The MicroPin features seven points of electrical

contact. This contact system assures high normal

force, excellent wipe and superior shock and

vibration performance.

SLEEVE WIRE

WIRE CRIMP

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Microstrips .050" Contact Spacing MT

How to Order

R MTV1 – 16 P H001 01

RoHS Compliance

Series

MTB1 – High Temperature Diallyl Phthalate 150°C (Recommended for severe environments)

MTV1 – Polyester 125°C (Recommended for general purpose use)

Number of Cavities

2through 40.

This number is the total number of cavities including guide pins and latches. 40 positions is the

maximum recommended size for standard strips, but sizes up to 120 positions are available on request.

Contact Type

P- Pin

S–Socket

Termination Style

Solder Cup contacts for customer termination

Pre-wired Pigtails

H067 – Pre-wired pigtail with 18” of insulated Teflon wire per M22759/11, #26 AWG, 19 strand, yellow

HY01 – Pre-wired pigtail with 18” of insulated Teflon wire per M22759/11, #26 AWG, 19 strand, 10 color repeating

Straight Terminals .018” diameter,gold-plated

L1 – 5” extension

L2 – 1” extension

L57 – .190” extension

L61 – .125” extension

Right Angle Terminals staggered footprint .018” diameter,gold plated

AL57 – .190” extension

AL61 – .125” extension

Right Angle Terminals .050" in-line footprint .018" diameter,gold plated

BL57 – .190” extension

BL61 – .125” extension

Surface Mount .018” diameter, gold-plated

CL1

Guide Pin and Latch Options

01 – Guide pin installed in end cavities of socket strip. Blank holes in end cavities of pin strip.

02 – Guide pin installed in cavity #1 of socket Strip. Blank holes in cavity #1 of pin strip.

03 – Spring latches installed in end cavities of socket strip. Latch clips installed in end cavities of pin strip. For use with MTV1 only.

04 – Spring latch installed in center cavity of socket strip. Spring latch installed in center cavity of pin strip. For use with MTV1 only.

Socket StripPin Strip

Guide Pins In End Cavities

Guide Pins In Cavity #1

End Latches

Center Latch

CAV #1

SOCKET

CAV #1

Solder Cup Straight Terminals

Right Angle Terminals

.100" Spacing Staggered

ALL EVEN

NUMBERED

CONTACTS

.100 (2.54)

AL57 .190 (4.83)

AL61 .125 (3.18)

Surface Mount Terminals

.0120 (0.30)

±.001 (0.03)

.010 (0.25)

TYP

.070 (1.78)

.030 (0.76)

.050 (1.27) MIN

SOLDER DIPPED

.025 (0.64)

REF

.160

(4.06)

.140

(3.56)

Right Angle Terminals

.050" Centers

.170 (4.32) MAX.

.065 (1.65) MAX.

.065 (1.65) MAX. .100 (2.54)

.018 (1.65)

±.002 (0.5)

BL57: .190 (4.83)

BL61: .125 (3.18) MIN+ .015 (0.38)

L1: .500 (12.7)

L2: 1.00 (25.4)

L57: .190 (4.83)

L6: .125 (3.18) MIN+ .015 (0.38)

.018 (.45)

±.002 (.05)

Microstrips .050" Contact Spacing MT

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Connector Weights

Contact (with std. 1/2”

copper pigtails) .040 gms.

MTB pin .021 gms.

Insulator socket .006 gms.

(per contact MTV pin .014 gms.

cavity) socket .004 gms.

Guide Stainless

Post Steel .035 gms.

Male .035 gms.

Latch Female .074 gms.

Terminal Dimensions

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Male Latch

.032 ±.003

(0.81 ±0.08)

DIA.

.200 ±.010

(5.08 ±0.25)

.010 (6.25)

REF

Female Latch

.100 (2.54)

REF

.020 (0.51)

REF

.250 (6.35)

MAX

.035 (0.89)

REF

.045 (1.14)

MAX

.076 (1.93)

MAX

.070 (1.78)

REF

.050 (1.27)

REF

NO CONTACT

.035 (0.89)

REF

.035 (0.89)

REF

.070 (1.78)

REF

.050 (1.27)

REF

NO CONTACT

.035 (0.89)

REF

.0085 (0.22)

REF

.077 (1.96)

MAX

.107 (2.72) MAX

.2835 (7.20)

REF

Latch Dimensions

Microstrips .050" Contact Spacing MT

Standard Wire Termination Codes

Harness Type - (H)

Length

H020

H019

H026

H029

H028

H001

H033

H009

H010

H011

H013

H017

H042

3 (76.2)

6 (152.4)

8 (203.2)

10 (254.0)

12 (304.8)

18 (457.2)

20 (508.0)

24 (609.6)

30 (762.0)

36 (914.4)

48 (1219.2)

72 (1828.5)

120 (3048.0)

H027

H016

H034

H025

H002

H003

H023

H004

H005

H006

H048

H046

H041

L61

L56

L57

L39

L58

L14

L16

L10

.125 (3.18)

.150 (3.81)

.190 (4.83)

.250 (6.35)

.375 (9.52)

.500 (12.70)

.750 (19.05)

1.000 (25.40)

1.500 (38.10)

2.000 (50.80)

2.500 (63.50)

3.000 (76.20)

All Yellow ColorCodedTerminationCode Length

#26 AWG per MIL-W-16878 Type E; Teflon Stranded

Solid UninsulatedType - (L)

#25 AWG Gold Plated Copper

Thefollowingtermination codesare listed for your

information.For additional codespleaserefer to

Appendix on page79 and 81. All wire lengths are

minimum.

Guide Pin Dimensions

Polarization

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Microminiature Strip - .100/.050" Contact Spacing MT

Modification code "-01" in the part number

refers to guide posts located on both ends

of the socket side of the 50-MIL STRIP

connector and empty cavities on the pin

side to accept the guide posts.

Although in many cases it is not necessary

to polarize 50-MIL STRIP connectors, there

are several ways to prevent cross plugging.

One method is the use of guide posts that

can be located in specified cavities to assure

that the contacts will align when these post

are positioned before mating.

MTB1 and MTV1 - .050 (1.27) Contact Centers

Receptacle Plug

.200 ± .010

(5.08 ± 0.25)

.032 ± .003

(0.81 ± 0.08)

DIA.

.126 ± .005

(3.20 ± 0.13)

.100 ± .005

(2.54 ± 0.13)

LEAD

LENGTH

.125 (3.18)

MAX. EPOXY

(INSULATED WIRE ONLY)

.050 (1.27) TYP.

CAVITY

.283 ± .005

(7.19 ± 0.13)

LEAD

LENGTH

.125 (3.18)

MAX. EPOXY

(INSULATED WIRE ONLY)

CAVITY

.070 ± .005 (1.78 ± 0.13): MTV

.080 ± .005 (2.03 ± 0.13): MTB

.070 ± .005 (1.78 ± 0.13): MTV

.080 ± .005 (2.03 ± 0.13): MTB

.050 (1.27) TYP.

NOTE: MTB1 available in up to 120 contacts.

Part

Number

by Size

MT*1-1**

MT*1-2**

MT*1-3**

MT*1-4**

MT*1-5**

MT*1-6**

MT*1-7**

MT*1-8**

MT*1-9**

MT*1-10**

MT*1-11**

MT*1-12**

MT*1-13**

MT*1-14**

MT*1-15**

MT*1-16**

MT*1-17**

MT*1-18**

MT*1-19**

MT*1-20**

.070 (1.78)

.120 (3.05)

.170 (4.32)

.220 (5.59)

.270 (6.85)

.320 (8.13)

.370 (9.40)

.420 (10.67)

.470 (11.94)

.520 (13.60)

.570 (14.48)

.620 (15.75)

.670 (17.02)

.720 (18.29)

.770 (19.56)

.820 (20.83)

.870 (22.10)

.920 (23.37)

.970 (24.64)

1.020 (25.91)

1.070 (27.18)

1.120 (28.45)

1.170 (29.72)

1.220 (30.99)

1.270 (32.36)

1.320 (33.53)

1.370 (34.80)

1.420 (36.07)

1.470 (37.34)

1.520 (38.61)

1.570 (39.88)

1.620 (41.15)

1.670 (42.42)

1.720 (43.69)

1.770 (44.96)

1.820 (46.23)

1.870 (47.50)

1.920 (48.77)

1.970 (50.04)

2.020 (51.31)

2.070 (52.58)

2.120 (53.85)

2.170 (55.12)

2.220 (56.39)

2.270 (57.66)

2.320 (58.93)

2.370 (60.20)

2.420 (61.47)

2.470 (62.74)

2.520 (64.01)

2.570 (65.28)

2.620 (66.55)

2.670 (67.82)

2.720 (69.09)

2.770 (70.36)

2.820 (71.63)

2.870 (72.90)

2.920 (74.17)

2.970 (75.44)

3.020 (76.71)

3.070 (77.98)

3.120 (79.25)

3.170 (80.52)

3.220 (81.79)

3.270 (83.06)

3.320 (84.33)

3.370 (85.60)

3.420 (86.87)

3.470 (88.14)

3.520 (89.41)

3.570 (90.68)

3.620 (91.95)

3.670 (93.22)

3.720 (94.49)

3.770 (95.76)

3.820 (97.03)

3.870 (98.30)

3.920 (99.57)

3.970 (100.84)

4.020 (102.11)

4.070 (103.38)

4.120 (104.65)

4.170 (105.92)

4.220 (107.19)

4.270 (108.46)

4.320 (109.73)

4.370 (111.00)

4.420 (112.27)

4.470 (113.54)

4.520 (114.81)

4.570 (116.08)

4.620 (117.35)

4.670 (118.62)

4.720 (119.89)

4.770 (121.16)

4.820 (122.43)

4.870 (123.70)

4.920 (124.97)

4.970 (126.24)

5.020 (127.50)

5.070 (128.78)

5.120 (130.05)

5.170 (131.32)

5.220 (132.59)

5.270 (133.86)

5.320 (135.13)

5.370 (136.40)

5.420 (137.67)

5.470 (138.94)

5.520 (140.21)

5.570 (141.48)

5.620 (142.75)

5.670 (144.02)

5.720 (145.29)

5.770 (146.56)

5.820 (147.83)

5.870 (149.10)

5.920 (150.37)

5.970 (151.64)

6.020 (152.91)

MT*1-21**

MT*1-22**

MT*1-23**

MT*1-24**

MT*1-25**

MT*1-26**

MT*1-27**

MT*1-28**

MT*1-29**

MT*1-30**

MT*1-31**

MT*1-32**

MT*1-33**

MT*1-34**

MT*1-35**

MT*1-36**

MT*1-37**

MT*1-38**

MT*1-39**

MT*1-40**

MT*1-41**

MT*1-42**

MT*1-43**

MT*1-44**

MT*1-45**

MT*1-46**

MT*1-47**

MT*1-48**

MT*1-49**

MT*1-50**

MT*1-51**

MT*1-52**

MT*1-53**

MT*1-54**

MT*1-55**

MT*1-56**

MT*1-57**

MT*1-58**

MT*1-59**

MT*1-60**

MT*1-61**

MT*1-62**

MT*1-63**

MT*1-64**

MT*1-65**

MT*1-66**

MT*1-67**

MT*1-68**

MT*1-69**

MT*1-70**

MT*1-71**

MT*1-72**

MT*1-73**

MT*1-74**

MT*1-75**

MT*1-76**

MT*1-77**

MT*1-78**

MT*1-79**

MT*1-80**

MT*1-81**

MT*1-82**

MT*1-83**

MT*1-84**

MT*1-85**

MT*1-86**

MT*1-87**

MT*1-88**

MT*1-89**

MT*1-90**

MT*1-91**

MT*1-92**

MT*1-93**

MT*1-94**

MT*1-95**

MT*1-96**

MT*1-97**

MT*1-98**

MT*1-99**

MT*1-100**

MT*1-101**

MT*1-102**

MT*1-103**

MT*1-104**

MT*1-105**

MT*1-106**

MT*1-107**

MT*1-108**

MT*1-109**

MT*1-110**

MT*1-111**

MT*1-112**

MT*1-113**

MT*1-114**

MT*1-115**

MT*1-116**

MT*1-117**

MT*1-118**

MT*1-119**

MT*1-120**

Part

Number

by Size

±.015 (0.38)

Part

Number

by Size

±.015 (0.38)

Part

Number

by Size

±.015 (0.38)

Part

Number

by Size

±.015 (0.38)

Part

Number

by Size

±.015 (0.38)

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Microminiature Strip - .100/.050" Contact Spacing MT

MTB2 and MTV2 - .100 (2.54) Contact Centers

Receptacle Plug

.200 ± .010

(5.08 ± 0.25)

.032 ± .003

(0.81 ± 0.08)

DIA.

.126 ± .005

(3.20 ± 0.13)

.100 ± .005

(2.54 ± 0.13)

LEAD

LENGTH

.125 (3.18)

MAX. EPOXY

(INSULATED WIRE ONLY)

.100 (2.54) TYP.

CAVITY

CAV #1

.283 ± .005

(7.19 ± 0.13)

LEAD

LENGTH

.125 (3.18)

MAX. EPOXY

(INSULATED WIRE ONLY)

CAVITY

.070 ± .005 (1.78 ± 0.13): MTV

.080 ± .005 (2.03 ± 0.13): MTB

.070 ± .005 (1.78 ± 0.13): MTV

.080 ± .005 (2.03 ± 0.13): MTB

.100 (2.54)

TYP.

Part

Number

by Size

MT*2-1**

MT*2-2**

MT*2-3**

MT*2-4**

MT*2-5**

MT*2-6**

MT*2-7**

MT*2-8**

MT*2-9**

MT*2-10**

MT*2-11**

MT*2-12**

MT*2-13**

MT*2-14**

MT*2-15**

MT*2-16**

MT*2-17**

MT*2-18**

MT*2-19**

MT*2-20**

MT*2*21**

MT*2-22**

MT*2-23**

MT*2-24**

MT*2-25**

MT*2-26**

MT*2-27**

MT*2-28**

MT*2-29**

MT*2-30**

MT*2-31**

MT*2-32**

MT*2-33**

MT*2-34**

MT*2-35**

MT*2-36**

MT*2-37**

MT*2-38**

MT*2-39**

MT*2-40**

MT*2-41**

MT*2-42**

MT*2-43**

MT*2-44**

MT*2-45**

MT*2-46**

MT*2-47**

MT*2-48**

MT*2-49**

MT*2-50**

MT*2*51**

MT*2-52**

MT*2-53**

MT*2-54**

MT*2-55**

MT*2-56**

MT*2-57**

MT*2-58**

MT*2-59**

MT*2-60**

.070 (1.78)

.170 (4.32)

.270 (6.86)

.370 (9.40)

.470 (11.94)

.570 (14.48)

.670 (17.02)

.770 (19.56)

.870 (22.10)

.970 (24.64)

1.070 (27.18)

1.170 (29.72)

1.270 (32.26)

1.370 (34.80)

1.470 (37.34)

1.570 (39.88)

1.670 (42.42)

1.770 (44.96)

1.870 (47.50)

1.970 (50.04)

2.070 (52.58)

2.170 (55.12)

2.270 (57.66)

2.370 (60.20)

2.470 (62.74)

2.570 (65.28)

2.670 (67.82)

2.770 (70.36)

2.870 (72.90)

2.970 (75.44)

±.015 (0.38)

Part

Number

by Size

±.015 (0.38)

3.070 (77.98)

3.170 (80.52)

3.270 (83.06)

3.370 (85.60)

3.470 (88.14)

3.570 (90.68)

3.670 (93.22)

3.770 (95.76)

3.870 (98.30)

3.970 (100.84)

4.070 (103.38)

4.170 (105.92)

4.270 (108.46)

4.370 (111.00)

4.470 (113.54)

4.570 (116.08)

4.670 (118.62)

4.770 (121.16)

4.870 (123.70)

4.970 (126.24)

5.070 (128.78)

5.170 (131.32)

5.270 (133.86)

5.370 (136.40)

5.470 (138.94)

5.570 (141.48)

5.670 (144.02)

5.770 (146.56)

5.870 (149.10)

5.970 (151.64)

How to Order

Not applicable for printed

circuit board configurations

shown on pages 55 & 56

MEB

SERIES PREFIX

MEB - L -

H -

S -

BR -

Consult factory for wire lead modification codes.

Consult factory

Uninsulated solid wire

Insulated stranded round harness

wire

Solder pots

PC board right angle, socket side only

Micro edgeboard, plug with twist pin

contacts or recept. with microsocket

contacts.

1 - .050 (1.27) centers 128/184

2 - .100 (2.54) centers 64/92

(alternate contact holes)

64, 92, 128, 184

P - Pin

S - Socket

* For other contact spacing acommodations consult customer service.

CONTACT SPACING

LAYOUT

CONTACT TYPE

TERMINATION MODIFICATIONS

LEAD LENGTH

OTHER MODIFICATIONS

LEAD LENGTH

OTHER MODIFICATIONS

1 128 P * * * * *-

RoHS COMPLIANCE

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Micro Edgeboard - .050" Contact Spacing MEB

The Micro Edgeboard (MEB) connector series

provides a combination of high density and high

reliability for applications in airborne and space

systems, computers and peripherals, and

industrial /commercial control systems. This

series incorporates the proven

MICROPINTM/MICROSOCKETTM contact. This

contact has an outstanding record of high

reliability and millions of contacts are in use in

various applications where electrical

interconnects are used.

The MEB has machined aluminum shells for

ruggedness, diallyl phthalate insulator for top

electrical performance and a 36-position

polarization key system to prevent cross plug-

ging. Contacts are on .050 (1.27) center

spacings. A variety of termination types are

available, including 90˚ or right angle pigtails

for multi-layered P.C. boards, "coke bottle”

termination for double-sided P.C. boards.

Harnessing capability is also available for both

pin and socket sides.

The MEB, including the SBR 90˚ or right angle

variation available for multi-layer boards, can

be mounted on the female (daughter) side of

double or single-sided P.C. boards. The mating

male (mother) board side can have the

terminations formed to meet the application

demands.

Conforms to MIL-C-55302/120 thru 123. (not

qualified)

Specifications

Shell:

Contact, Pin and Socket:

Jackscrew/Jackpost:

Insulator:

6061-T6 Aluminum Alloy per QQ-A-200/8 or QQ-A-225/8, electroless nickel per

SAE AMS-C-26074, Class 4, except .0010 to .0015 (0.03 to 0.04) thick or conversion

coating per MIL-C-5541, Class 3, color gold.

Copper Alloy, 50 microinch gold per ASTM B488, Type II, Code C, Class 1.25

303 stainless steel, passivated per QQ-P-35.

Glass-filled diallyl phthalate per MIL-M-14, Type SDG-F, color green Polyester

per MIL-M-24519, Type GPT-30F , color black available for MEB-128 upon

request.

MATERIALS AND FINISHES

Consult factory for stranded wie lead modifications codes.

Size or Length:

Coupling:

Polarization:

Contact Spacing Centers:

Shell Styles:

2sizes

Friction/Jackscrew

Shells, polarizing keys (36 positions)

.050 (1.27)

Plug and receptacle

TERMINATION TYPES

MECHANICAL FEATURES

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Micro Edgeboard - .050" Contact Spacing MEB

Plug (Mother Board)

Receptacle (Daughter Board)

#24 AWG

RETAINING PIN HOLES

.050

(1.27)

.050 (1.27)

.250 (6.35)

.180 ± .005

(4.57 ± .13)

.0945 ± .0035 (2.40 ± .09) DIA.

THRU .187 (4.75) X .045 (1.14) DEEP "C" BORE 2 PLACES "A" SIDE ONLY

.187 (4.75) DIA. THRU "B"SIDE ONLY

Part No.

128S

128SBR

.5 (14.17)

*Will accept up to .093 (2.36) thick P.C. Board with shell modifications.

3.950 (100.33) .250 (6.35) 3.700 (93.98).400 (10.16) .300 (7.62) .280 (7.11) .030 (0.76) .200 (5.08)

Weight

oz. (gm.) Max.

±.015 (0.38)

±.010 (0.25)

Max.

±.020 (0.51)

MEB1-12BS

#24 AWG

RETAINING PIN HOLES

.050

(1.27)

.050 (1.27)

.250 (6.35)

.180 ± .005

(4.57 ± .13)

.0945 ± .0035 (2.40 ± .09) DIA.

THRU .187 (4.75) X .045 (1.14) DEEP "C" BORE 2 PLACES "A" SIDE ONLY

.187 (4.75) DIA. THRU "B"SIDE ONLY

Part No.

128S

128SBR

.5 (14.17)

*Will accept up to .093 (2.36) thick P.C. Board with shell modifications.

3.950 (100.33) .250 (6.35) 3.700 (93.98).400 (10.16) .300 (7.62) .280 (7.11) .030 (0.76) .200 (5.08)

Weight

oz. (gm.) Max.

±.015 (0.38)

±.010 (0.25)

Max.

±.020 (0.51)

MEB1-12BS

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Micro Edgeboard - .050" Contact Spacing MEB

Plug (Mother Board)

MEB1-184P

.050 (1.27) TYP

RETAINING PIN HOLES

TYP E

#25 AWG

(MEB1-184P)

.075 (1.91)

.075 (1.91) TYP.

Part No.

184P 1.0 (28.35) 2.775 (70.49).343 (8.71)5.800 (147.32) .250 (6.35).400 (10.16) .280 (7.11) .350 (8.89) .275 (6.99)

Weight

oz. (gm.) Max.

+_.015 (0.38)

+_.010 (0.25)

+_.005 (0.13)

+_.010 (0.25)

+_.025 (0.64)

.075

(1.91)

.0945 +_ .0035

(2.40 +_ 0.09)

3 PLACES

Receptacle (Daughter Board)

#24 AWG

RETAINING PIN HOLES

.075

(1.91)

.050 (1.27) TYP.

.250

(6.35)

.180 ± .005

(4.57 ± 0.13)

.0945 ± .0035 (2.40 ± .09) DIA.

THRU .187 (4.75) X .075 (1.91) DEEP "C" BORE

3 PLACES-A SIDE ONLY.

.187 (4.75) DIA. 3 PLACES-B SIDE ONLY

Part No.

184S

184SBR

1.0 (28.35)

*Will accept up to .093 (2.36) thick P.C. Board with shell modifications.

All round pigtail #25 AWG wire termination designs available for the MEB1-12B receptacle will apply on the MEB1-184 series also.

5.800 (147.32) .343 (8.71) 2.775 (70.49) .400 (10.16) .300 (7.62) .280 (7.11) .030 (0.76) .200 (5.08) .250 (6.35)

Weight

oz. (gm.) Max.

±.015 (0.38)

±.010 (0.25)

±.005 (0.13)

±.010 (0.25)

Max.

±.020 (0.51)

±.010 (0.25)

MEB1-184S

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Micro Edgeboard - .050" Contact Spacing MEB

PC Board Right Angle

.075

(1.91)

.050

(1.27)

.150

(3.81)

.075

(1.91)

.100

(2.54)

.110

(2.79)

MIN.

.100

(2.54)

3PLACES

BOARD

ROW B

EVEN*

ROW A

EVEN*

ROW B

ODD*

ROW A

ODD*

.275

(6.99)

.180

(4.57)

B6 B4 B2

A5 A3

A2 A1

MEB1-128SBR

Keying Accessory - Key and Retaining Pin

.186 ± .003 HEX.

(4.72 ± 0.08)

.106 ± .003

(2.69 ± 0.08)

DIA.

#2-56 UNC-2B

THREAD

.029 (0.74)

DIA. MAX.

.029 (0.74)

DIA. MAX.

.034 ± .001

(0.86 ± 0.03)

.034 ± .001

(0.86 ± 0.03)

MEB-184

P/N 980-0004-129

MEB-128

P/N 980-0003-879

P/N 201-9509-000

± .003 (0.08)

.081 (2.06) .325 (8.26) .089 (2.26) .250 (6.35) .313 (7.95)

± .005 (0.13) C

± .003 (0.08) D

± .010 (0.25) E

± .010 (0.25)

Polarizing Hardware Kit

Contains 2 polarizing keys and 4 spiral pins.

MEB-128-P/N 320-9514-003

MEB-184-P/N 320-9514-002

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Micro Edgeboard - .050" Contact Spacing MEB

Jackscrew/ Jackpost Assembly (MEB 64 & 128 Sizes Only)

Jackpost Kit

Jackscrew Kit

MEB plug or receptacle-P/N 320-9514-001 RETAINING

RETAINING

.270 (6.86)

MAX.

.045

(1.14)

REF.

.790 ± .010

20.07 ± 0.25)

JACKSCREW

ASSEMBLY

JACKPOST

#2-56

UNC-2A

THREAD

RETAINING

JACKSCREW

ASSEMBLY

RETAINING

PLUG

CONNECTOR

WASHER

[.022 (0.56) thk]

Plug

with Jackscrew Receptacle

with Jackscrew

JACKPOST

RECEPTACLE

CONNECTOR

.260

(6.60)

MAX.

#2-56

UNC-2A

THREAD

WASHER

[.032 (0.81) THK]

MEB plug-P/N 320-9521-001

MEB receptacle-P/N 320-9521-000

Contains 2 bushings and 4 spirals pins

Contains 2 jackscrew assemblies

Special Variations

.016

(0.41)

DIA.

.250

(6.35)

.580

(14.73)

4-40 UNC-THD

THRU HOLE

.200

(5.08)

MIN.

.110

(2.79)

2 PLACES

.030

(0.76)

.060

(1.52)

.275

(6.99)

.125 +_ .010

(3.18 +_ 0.25)

2 PLACES

.285

(7.24)

MAX.

.100

(2.54)

31 PLACES

Alternative Receptacle Configuration

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

The Centi Line - .075" Contact Spacing

Standard Data

The Cannon Centi connectors are especially

suitable for commercial applications such as

computers, instrumentation, communications

and audio equipment. They are available in D

subminiature size metal shell rectangular, plas-

tic shell rectangular and strip configurations.

All Centi connectors use the reliable twist pin

contact design in a 5 amp version terminated

on .075 (1.91) and .100 (2.54) centers. The

Centi contact is crimp removable, connectors

are available for customer assembly. Standard

crimp and assembly tools are available.

The twist pin contact is recessed within the

insulator housing while the rugged cylindrical

socket is exposed. When the connector halves

are mated, the chamfered sockets guide the

pins into positive alignment. The CentipinTM

contact, now under compression, forms a

multi-point contact with the CentisocketTM to

provide a high degree of reliability.

•Contact rating: 5 amps max, except BR

Series (2 amps max.)

•Minimum contact centers: 0.075 (1.91).

•Wiresizes: #22 thru #26 AWG, stranded or

solid.

•Contact termination: Multiple indent crimp.

•Contact retention: Crimp snap-in/removable.

•Contact materials and finish: Copper alloy,

gold- plated per ASTM B488, Type II, Code

C, Class 1.25.

•Mating/unmating force: 12 oz. per contact,

max.

Performance Data

Test

Method 301:

1,000 VAC at sea level

300 VAC at 70,000' altitude

Method 302, Condition A

Method 107, Condition A

+55˚C to +85˚C

Method 213, Condition I:

100 G's, 3 axes, 6 millisecond

duration sawtooth pulse

Method 204, Condition B:

15 G's, 10-2,000 Hz, 12 hours

500 cycles of mating and

unmating, 500 CPH max.

Method 106, Omit 7a and 7b

Method 101, Condition B:

48 hours

Method 307:

At 5 amps

No breakdown

5,000 megohms minimum

No physical damage

No loss of continutiy> 1/µsec

No physical damage

No loss of continuity> 1µsec

No mechanical or electrical defects

Insulation resistance > 100 megohms

Shall be capable of mating and unmating

and meet contact resistance requirements

9 milliohms maximum

4 lb. minimum axial load

(after 10 insertion extraction cycles)

Dielectric Withstanding

Voltage

Insulation Resistance

Thermal Shock

Physical Shock

Vibration

Durability

Moisture Resistance

Salt Spray

Contact Resistance

Contact Retention

Method Criteria of Acceptance

How to Order

SERIES

NOTE: Connectors may be ordered less contacts by adding the mod callout "FO" at end of number.

Contacts are then supplied in bulk form.

* Accommodates AWG #26 thru #22

PBR* * * *

SERIES

2D - Double Density D19, 31, 52, 79 and 100 BR - 90˚ right angle PCBmounting

(For BR Series use "P" to designate jackpost)

F171 - Jackpost assembly

F172- Standard jackscrew

F173 - Lowprofile jackscrew

For other modifications consult factory

P-Pin

S-Socket

E,A, B, C and D

Omit if not required

SHELL SIZE

FLOAT MOUNTS

CONTACT ARRANGEMENT

CONTACT TYPE

CONTACT TYPE*

TERMINATION

MODIFICATION

RoHSCOMPLIANCE

Double Density D - .075" Contact Spacing 2D

The Double Density D is a rectangular connector in

the popular D Subminiature shell configuration

featuring double the contact density in the same

insert area. The Double Density D connector can

thus accommodate up to 100 contacts instead of 50.

This double contact density is achieved by using

field-proven, highly reliable CentipinTM/CentisocketTM

contacts on .075 (1.91) centers, in the positive con-

tact alignment design. In this design contact

positions are reversed; the flexible CentipinTM

contacts are recessed in the insulator and the more

rugged CentisocketTMcontacts are exposed. This

reversal of positions, and the chamfered-entry of the

sockets, assures positive mating even under severe

misalignment conditions. The contacts are retained

in the monobloc insulator by a resilient internal

shoulder that snaps into a locking groove in the con-

tact. The chamfered front of the contact will not

damage the internal shoulder in the insulator.

Contacts are crimp removable type.

The Double Density D connector is available in the

five popular shell and insert sizes accommodating up

to100 contacts. These connectors mate exclusively

with other Double Density D connectors. A wide

range of accessories can be used, including junction

shells, potting cups, switching shells, guide pin

plates, and dust caps.

1.STANDARD D HARDWARE-

2. ONE PIECE MONOBLOCK INSULATOR-

Including full range of D-Subminiature accessories

glass-filled nylon material

thermoplastic internal shoulder snaps into a locking groove in the contact.

seven outer wiping surfaces assure electrical continuity even under severe

shock and vibration

flexible pin is recessed in insulator cavity and rugged socket is exposed

assure alignment during mating and prevent scooping

Retention Force: 8 lbs. min. initially, 4 lbs. min. after 10 cycles.

3. CONTACT RETENTION-

4. TWIST PIN CONTACTS-

5. POSTIVE CONTACT ALIGNMENT-

6. GUIDE-IN KEYS AND KEYWAYS-

Specifications

WEIGHT

Part Number

by shell size

2DE19P

2DE19S

2DA31P

2DA31S

2DB52P

2DB52S

2DC79P

2DC79S

2DD100P

2DD100S

4.05

3.75

5.20

4.90

8.75

7.15

11.70

9.70

12.85

10.95

5.02

5.17

6.78

7.22

11.40

11.05

15.73

15.62

17.95

18.45

.142

.133

.183

.173

.308

.252

.413

.342

.453

.386

*Shell

Mounting Hardware

and Float Mounts

Insulator

Contacts

Alternate finish,

Modification Code

Steel, cadmium plated with yellow chro-

mate supplementary coating

Stainless steel

Glass-filled nylon

Copper alloy, gold plate

A106 Gold over brass

A156 Gold over brass

A197 Tin/Lead over steel

Sizes

Coupling

Polarization

Contact Spacing

Contact Termination

- Five shell sizes: E, A, B, C, and D

- Friction or jackscrew

- Keystone-shaped shells

- .075 (1.91)

- Crimp snap-in

*Brass non-magnetic also available

.177

.182

.239

.255

.402

.390

.555

.551

.633

.651

Weight (in gr.)

Less With Contacts

Weight (in oz.)

Less With Contacts

MATERIALS AND FINISHES MECHANICAL FEATURES

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

Double Density D - .075" Contact Spacing 2D

Standard Shell

++++

Part Number

by Shell Size

2DE19P

2DE19S

2DA31P

2DA31S

2DB52P

.250 (6.35)

.236 (5.99)

2DB52S

2DC79P

2DC79S

2DD100P

2DD100S

.236 (5.99)

+ .020 (0.51)

- .000 (0.00)

Part Number

by Shell Size

+ .020 (0.51)

- .000 (0.00)

.856(21.74)MAX.

TWO MTG. HOLES

.123 ± .005

(3.12 ± 0.13)

10˚ (TYP)

Float Mount

TWO MTG. HOLES

.0885 ± .0025

(2.248 ± 0.064)

10˚ (TYP)

.032 (.812)

TOTAL

DIAMETRAL

FLOAT V

Part Number

by Shell Size

± .015 (0.38)

±.015 (0.38)

± .010 (0.25)

Max.

2DE19P

2DE19S

2DA31P

2DA31S

2DB52P

2DB52S

2DC79P

2DC79S

2DD100P

2DD100S

1.213 (30.81)

1.541 (39.14)

2.088 (53.03)

2.729 (69.31)

2.635 (66.92)

.697 (17.70)

.640 (16.26)

1.025 (26.03)

.968 (24.58)

1.583 (40.21)

1.508 (38.30)

2.231 (56.67)

2.156 (54.76)

2.127 (54.02)

2.062 (52.37)

.984 (24.99)

1.312 (33.32)

1.852 (47.04)

2.500 (63.50)

2.406 (61.11)

.360 (9.14)

.308 (7.82)

.360 (9.14)

.308 (7.82)

.378 (9.60)

.308 (7.82)

.378 (9.60)

.308 (7.82)

.484 (12.29)

.420 (10.67)

.494 (12.55)

.605 (15.37)

.759 (19.28)

1.083 (27.51)

1.625 (41.27)

2.272 (57.71)

2.178 (55.32)

.422 (10.72)

.534 (13.56)

.036 (.914)

.032 (213)

.036 (.914)

.032 (213)

.036 (.914)

.032 (213)

.036 (.914)

.032 (213)

.036 (.914)

.032 (213)

.236 (5.99)

.243 (6.17)

.236 (5.99)

.243 (6.17)

.231 (5.87)

.243 (6.17)

.231 (5.87)

.243 (6.17)

.231 (5.87)

.243 (6.17)

.055 (1.40)

.047 (1.19)

.055 (1.40)

.047 (1.19)

.055 (1.40)

.047 (1.19)

.055 (1.40)

.047 (1.19)

.055 (1.40)

.047 (1.19)

.422 (10.72)

.429 (10.90)

.422 (10.72)

.429 (10.90)

.426 (10.82)

.429 (10.90)

.426 (10.82)

.429 (10.90)

.426 (10.82)

.429 (10.90)

.120 (3.05)

.129 (3.28)

.120 (3.05)

.129 (3.28)

.120 (3.05)

.129 (3.28)

.120 (3.05)

.555 (14.10)

For shell with float mounts, add letter F after shell size, e.g., 2DEF19P.

Jackscrew/Jackpost Assembly

#4-40 UNC-2A THREAD #4-40 UNC-2A THREAD

#4-40 UNC-2A THREAD

#4-40 UNC-2B

THREAD

.233 (5.92)

.223 (5.66)

.325 ± .015

(8.26 ± 0.38)

.025 (0.64)

MAX.

.025 (0.64)

MAX.

.180 ± .025 Grip

(4.57 ± 0.64) Length

.180 ± .025 Grip

(4.57 ± 0.64) Length

.230 (5.84) MAX.

.620 ± .010

(15.75 ± 0.25)

Standard (F172) Jackscrew

(factory installed)

Low Profile (F173) Jackscrew

(factory installed)

Jackpost (F171)

Front Panel Connector Mounting Only

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

Double Density D - .075" Contact Spacing 2D

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Contact Arrangements

19 Contacts

All views are pin front face. Use reverse order for socket side.

Cavity identification numbers are shown for reference only and do not appear on insulator front face. However they do appear on rear of insulator.

100

31 Contacts

52 Contacts

100 Contacts

79 Contacts

90˚ PCB Mounting - 3 Row

.148

(3.76)

MIN.

.253 (6.43)

.233 (5.92)

.130 (3.30)

.100 (2.54)

.125 (3.18)

.115 (2.92)

DIA. TYP.

.0375

(0.95)

REF.

.075

(.190)

REF.

.690

(17.53)

MAX.

.510 (12.95)

.490 (12.45)

.510 (12.95)

.480 (12.18)

CAV. #1

.065 (1.65)

#4-40

UNC-2B THREAD

(2PLACES)

LAST

LEAD

PCB Termination Leads

(all contact arrangements)

.024 (6.10) to .028 (7.11).

Suggested finished PC hole

Size .033 (8.38) +_ .003 (0.08)

LEAD #1

LAST CAV.

.075 (1.90)

.100

(2.54)

REF.

.100

(2.54)

REF.

Part Number

by Shell Size

± .015 (0.38)

± .010 (0.25)

Max.

2DE19SBRP

2DA31SBRP

2DB52SBRP

2DC79SBRP

1.215 (30.86)

1.540 (39.12)

2.090 (53.09)

2.730 (69.34)

.984 (24.99)

1.312 (33.32)

1.852 (47.04)

2.500 (63.50)

.690 (17.53)

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

90˚ PCB Mounting - 4 Row

++++++

+++++++

+++

+ + +

++++++

+++++++

+++

+ + +

.130

(3.30)

MIN.

.253 (6.43)

.233 (5.92)

.790

(20.07)

MAX.

.125 (3.18)

.115 (2.92)

DIA. TYP.

.510 (12.95)

.490 (12.45)

.065 (1.65)

.620 (15.75)

.590 (14.99)

.075 (1.90)

CAV #100

LEAD

#100

Part Number

by Shell Size

2DD100SBRP

+_ .015 (0.38)

+_ .010 (0.25)

Max.

2.635 (66.93) 2.406 (61.11) .790 (20.07)

Contact Arrangements - Page 62

LEAD

CAV #1

#4-40

UNC-2B THREAD

(2 PLACES)

.0375 (0.94) REF.

.075 (1.90) REF.

.100

(2.54)

REF.

.100

(2.54)

REF.

.200

(5.08)

REF.

Double Density D - .075" Contact Spacing 2D

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Double Density D - .075" Contact Spacing 2D

Panel Cutouts

KTYP R

FULL R

.032 (0.81) R MAX. TYP

10˚0' TYP.

Mtg.

Method

+_ .005 (0.13)

+_ .002 (0.05)

+_ .002 (0.05)Conn.

2DE

2DA

2DB

2DC

2DD

Front

Rear

Front

Rear

Front

Rear

Front

Rear

Front

Rear

.874 (22.20)

.806 (20.47)

1.202 (30.53)

1.134 (28.80)

1.743 (44.27)

1.674 (42.52)

2.391 (60.73)

2.326 (59.08)

2.297 (58.34)

2.218 (56.34)

.437 (11.10)

.403 (10.24)

.601 (15.26)

.567 (14.40)

.872 (22.15)

.837 (21.26)

1.196 (30.38)

1.163 (29.54)

1.149 (29.18)

1.109 (28.17)

.984 (24.99)

1.312 (33.32)

1.852 (47.04)

2.500 (63.50)

2.406 (61.11)

.492 (12.50)

.656 (16.66)

.926 (23.52)

1.250 (31.75)

1.203 (30.56)

.513 (13.03)

.449 (11.40)

.513 (13.03)

.449 (11.40)

.513 (13.03)

.449 (11.40)

.513 (13.03)

.449 (11.40)

.623 (15.82)

.555 (14.10)

.257 (6.53)

.225 (5.71)

.257 (6.53)

.225 (5.71)

.257 (6.53)

.225 (5.71)

.257 (6.53)

.225 (5.71)

.312 (7.92)

.278 (7.06)

.120 (3.05)

.060 (1.52)

.083 (2.11)

.132 (3.35)

.083 (2.11)

.132 (3.35)

.083 (2.11)

.132 (3.35)

.083 (2.11)

.132 (3.35)

.083 (2.11)

.132 (3.35)

For contact part numbers, termination tooling and assembly see pages 67-69.

Panel Mounting

3/32 THICKNESS (REF. )

RECOMMENDED RIVET THICKNESS

RIVET THICKNESS

Front Mounting

Standard

Rear Mounting

Standard

Front Mounting

Float

Rear Mounting

Float

www.ittcannon.com

Centi-D Loc-.075" Contact Spacing CDL

How to Order

Asubminiature allplastic high density "D" rectan-

gularconnector. TheCDL is ageneralpurpose

connector with a peripheral o-ring and wire sealing

gasket.Connectorutilizesrear insertion, front re-

lease,crimpsnap-in size 22,centi-loc contacts

installable by the custormer or, if preferred, by the

factory.

MATERIAL

Insulator:

Dielectric Gasket:

Contact:

Seal Ring

Black Nylon

Polychloroprene

Copper Alloy, Gold Plated

Silicone

SERIES

Centi-D Loc Series 139

(Consult customer service for other sizes)

P - Centi-loc pin

S - Centi-loc socket

F0 - Less contacts

- No lock (mtg. holes)

- No lock type with rear gasket

CONTACT ARRANGEMENT

CONTACT STYLE

MODIFICATION CODES

TYPE

CDL 2A 139 F0P *- --

TYPE

CONTACT ARRANGEMENT

CONTACT STYLE

MODIFICATION CODES

RoHS

COMPLIANCE

Plug

2.344 (59.54)

± .005 (0.13)

.625 (15.88)

± .010 (0.25)

.260 (6.60)

± .010 (0.25)

.540 (13.72)

MAX.

.150 (3.81)

± .010 (0.25)

2.025 (51.44)

MAX.

Plug Receptacle

SILICONE

SEAL RING

CONTACT

HEIGHT

.035 (0.89)

.015 (0.38)

2.625 (66.68)

.560 (14.22)

MAX.

CAVITY #1

.625 (15.88)

± .010 (0.25)

.175 (4.44) MAX.

CONTACT

HEIGHT

.065 (1.65)

.045 (1.14)

.535

(13.59)

MAX.

.150 (3.81)

± .010 (0.25)

2.025 (51.44) MAX.

CAVITY #1

Recommended Panel Cutouts

.125 (3.18)

DIA. TYP.

.565 (14.35)

± .005 (0.13)

.2035 (51.69)

± .016 (0.41) .063 (1.60)

RAD. MAX.

2.344 (59.54)

± .005 (0.13)

Contact Arrangements

Plug Receptacle

CAVITY #1 CAVITY #1

CAVITY #70

Engaging Face View

CAVITY #70

CAVITY #117 CAVITY #117

CAVITY #92

CAVITY #139 CAVITY #139

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Strip Connectors - .100"/.075" Contact Spacing CTA

Components and Accessories

www.ittcannon.com

CENTI-LOC connectors are low-cost nylon

strip connectors designed for commercial

applications such as instrumentation, commu-

nications, and medical equipment. They are

available in continuous strip form up to a max-

imum length of 6 inches (152.40mm), accom-

modating from 1 to 60 rear insertion, front

release, crimp snap-in size 22 CENTIPINTM/

CENTISOCKETTM contacts. These contacts

utilize a proven positive contact alignment

design, giving additional contact strength and

positive contact alignment during mating.

These connectors can be ordered in kit or bulk

form. The kit comprises all the parts necessary

to assemble one complete 6-inch (152.40) strip

connector with 60 contacts on .100 (2.54) cen-

ters or a 4-inch (101.60mm) strip with 53 con-

tacts on .075 (1.91) centers. If more then one

connector is required, the parts can be ordered

in bulk and assembled as desired.

The CENTI-LOC strip connector can be ordered in

kit or bulk form. The kit includes matin g insulators

with a full compliment of contacts and two guide

posts. If more than one connector is required, the

parts can be ordered in bulk and assembled as

desired.

The guide posts and polarizing posts are inserted in the same manner as the contacts. The guide

posts are inserted into the socket insulator and the polarizing posts are inserted into the pin

insulator. The corresponding contact in the mating insulator must be removed for each.

See assembly instructions.

Kit Form

Insulator

Part

Number

CTA3-KIT

CTA4-KIT

CTA3-CTA4-KIT

Part

Number

Contact

Center

Spacing Type Material

CTA3-IP-53

CTA3-IS-53

CTA4-IP-60

CTA4-IS-60

CTA-GP

CTA-PP

.075 (1.91)

.100 (2.54)

Socket

P/N 230-9507-000

P/N 230-9506-000

Nylon

Passivated Stainless Steel

Insulator

Guide Post

Polarizing Post

.075 (1.91)

.100 (2.54)

.075 (1.91) & .100 (2.54)

Contact

Center spacing Guide Posts

Polarizing Posts

.475 (12.06)

MAX.

.275 (6.98)

MAX.

Kits include mating insulators with full

complement of contacts and two guide posts.

Dimensional Data

Weights

CTA3-.075(1.91) Centers CTA4-.100(2.54) Centers

4.031 (102.39)

MAX.

.040 (1.02) MIN. .040 (1.02) MIN.

.115 (2.92)

MAX.

.115 (2.92)

MAX.

.100 (2.54)

TYP.

6.031 (153.19)

MAX.

.075 (1.91)

TYP.

Part

Number

No. of

Contacts

Type

Avy. Weight

oz.

± 5%

gm.

socket

.185

.203

.230

.241

5.25

5.75

6.30

6.90

CTA3

CTA4

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

The Centi Line - .075" Contact Spacing 2D/CTA

Contacts

Aresilient internal shoulder retains the contacts in the

insulator housing. The front of the contact is chamfered

to prevent damage to the internal shoulder as the

contact is pushed into position.

Subtract .064 (1.63) +_ .010 (.25) from pigtail

length when used in 2D pin insulator for potting

well of connector assembly.

Subtract .081 (2.08) +_ .010 (.25) from pigtail

length when used in 2D socket insulator for

potting well of connector assembly.

Contact Part Number

Part Number

031-9540-000

031-9540-004

031-9540-005

030-9542-001

030-9542-002

030-9542-004

Standard 30µin. plating

50µin. plating

NOTE: Plating,except as noted,is 30 micro-inch gold.

Consult factory for any tail size or plating requirements.

Special crimp locator required. Part number: 995-0001-714. (L3198-CL-PSL)

Use special insertion tip (323-9510-016 &-017).

***

With inspection hole;

50µin. plating

P.C. tail

.026 dia. x.083 lg. Soc.

N/A 030-9542-011

P.C. tail

.020 dia. x

030-9542-012

Long crimp

barrel **

030-9542-014

Small crimp bore

For AWG #32 &30

030-9556-000

***

Small crimp bore

For AWG #28 &30

030-9542-022

.183 lg. Soc.

.183 lg. Pin

P.C. tail

.020 dia. x

030-9542-015

P.C. tail

.018 dia. x

030-9542-016

*031-9540-013

031-9540-016

031-9540-022

***

031-9540-007

*031-9540-015

*031-9540-019

.232 lg. Soc.

.255 lg. Pin

.444 lg. Soc.

.445 lg. Pin

Socket TypePin Socket

P.C. TailContacts

2D and Centi-Loc Crimp and Assembly Tools

Insertion Tools For Standard Contact

Insertion Tools For Long Crimp barrel Contacts

Extraction Tools

Tool

M22520/2-01

CIET-CTA

Handle

CTA-AB

Assembly Holding

Block

Part Number: 328-9508-000

Socket Extraction

Tip

Pin Extraction

Tip

Insertion Tips

Description

Part Number

AWG

Size*

30/P.C. Tail

AWG

Size*

Tip Part Number ***

Pin Contact

Tip Part Number ***

Socket Contact

Contact

CENTIPIN

CENTISOCKET

Description

CET-P-CTA-2

CET-S-CTA-1

Kit Part Number

(handle and tip)

Tip Part

Number

Handle Part

Number

070112-0002

070113-0001

324-9502-000

324-9501-000

204-9500-000

Handle

Part Number***

204-9500-000

323-9510-008

323-9510-009

323-9510-010

323-9510-012

323-9510-013

323-9510-014

Based on wire size per MIL-W-16878 with Type E insulation, use smaller tool for wire with thin

insulation, larger tool for wire having thick insulation.

The 5 insertion tips (part numbers 323-9510-001 thru - 005). plus handle, and the pin and socket

extaction tips maybe ordered as a SINGLE KIT by specifying the part number CIET-CTA-2.

[Part number: 070143-0002].

To order the SINGLE KIT for the long crimp barrel contact (tip part numbers 323-9510-008 thru

-014, handle and pin and socket extraction tips) please specify CIET-CTA-3.

***

CIT-PS-CTA-22

CIT-PS-CTA-24

CIT-PS-CTA-26

CIT-PS-CTA-28

CIT-PS-CTA-30

323-9510-001

323-9510-002

323-9510-003

323-9510-004

323-9510-005

204-9500-000

Kit Part Number

(handle and tip)

Tip

Part Number**

Handle

Part Number**

M22520/2-01

995-0001-584

L3198-CLP

995-0001-338

L3198-CLS

995-0001-353

Pin Socket

Locators

The Centi Line - .075" Contact Spacing 2D/CTA

2D/CTA CENTI-LOCTM Connectors Assembly Instructions

www.ittcannon.com

The Double Density D/CTA CENTI-LOC Connectors

are highly reliable and simple connectors to use.

There are a few helpful suggestions that will assure

complete satisfaction when followed:

1. The following instructions should be followed.

2. The proper crimp tool and locator (if required)

must be used. These tools have been designed

for use with this product. Substitutions of crimp-

ing equipment may result in connector failure at

the assembly operation.

3. After crimping a contact to a lead it is of vital

importance that the proper tool be used to assure

seating the contact in the insulator in the proper

position. Any substitution of insertion tools may

result in over or under insertion of the contact

which may damage the retention system of the

insulator.

4. The female (socket) side of the connector has

been designed with a controlled float to allow for

ease of mating. To avoid reducing this float or

causing a splaying of the contacts, any unneces-

sary strain caused by clamping the leads too

close to the rear of the connector should be

avoided.

Use of recommended tooling together with proper

assembly techniques will pay dividends in reliability

and reduced costs.

2D Assembly Instructions

Cut the wires to length required and strip .100" of

insulation from the end to be crimped. Check for

cut or broken wires and frayed insulation.

Using the proper crimp tool and locator, insert the

contact into the locator. Insert the stripped end of the

wire into the contact crimp pot, and crimp the contact to

the wire. Squeeze the handles firmly to insure a proper

crimp (tool will not release if crimping is incomplete).

NOTE: Contact stop must be changed in tool locator

when crimping pin and socket contacts.

1. Placethe properinsertion tip in the

insertion/-extraction handle and put the tip over the

wire as shown. The tool tip will butt up against the

crimppot.Connectormust be firmlysupported

duringbothinsertion andextractionoperations.

2. Using a firm, steady pressure, push the contact into

the cavity until the resilient internal shoulder in the

insulator snaps into the locking groove in the contact.

The shoulder of the tool tip bottoms against the rear

of the insulator, preventing over-insertion. Repeat for

balance of contacts.

1. For contact extraction, remove the insertion tool

tip and replace it with the proper extraction tool tip.

(The socket tip will fit into the socket, and the pin

tip will slide over the pin bundle). Insert the tool tip

into the contact cavity: (the pin tip will butt up

against the shoulder of the pin contact, and the

socket tip will bottom out in the socket contact.)

2. Apply a firm, steady pressure until the contact is

released from the internal shoulder in the insulator. The

shoulder of the tool tip bottom against the insulator

face to prevent damage to the internal shoulder.

Remove the tool tip and pull the contact from the rear

of the connector. Repeat for the balance of contacts to

be removed.

WIRE STRIPPING

.100

(2.54)

CONTACT INSERTION

CONTACT EXTRACTION

CONTACTCRIMPING

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

The Centi Line - .075" Contact Spacing 2D/CTA

CTA Assembly Instructions

.275 (6.98)

MAX.

.475 (12.06)

MAX.

INSERTION

Guide Posts

Polarizing Posts

1. Place the connector into the slot in the assembly block

with the arrows on the insulator pointing downward. The

connector will bottom against the internal shoulder in the

groove in the assembly block. Start contact insertion by

placing the crimped contact in the cavity by hard.

3. With firm steady pressure, push the contact into the

cavity until the resilient internal shoulder snaps into the

locking groove in the contact. To prevent over insertion,

the tool tip bottoms against the rear of the insulator.

4. The guide post and polarizing posts are inserted in teh

same manner as the contacts. The guide posts are inserted

into the socket insulator, and the polarizing posts are

inserted into the pin insulartor. The corresponding contact

in the mating insulator must be removed for each.

2. Position the insertion tool tip on the rear of contact as

shown. The insulation must be pulled back from the crimp

pot approximately 1/32" to allow the tool tip to butt

against the contact crimp pot.

EXTRACTION

1. To extract the contacts, place the conector face up in

the assembly block so that the contact to be extracted is

in the end of the block that has a fully slotted opening.

2. The pin extraction tool tip is tubular, slides over the pin

bundle and butts against the front shoulder of the pin. The

socket extraction tool is a solid rod that fits into the socket

contact, the external shoulder butts against the contact

socket shoulder.

3. Insert the extraction tool into the cavity and apply firm

pressure until the contact is pushed thru the rear of the

connector.

4. Lift the insulator from the groove and pull the contact

out. Repeat for balance of contacts to be removed.

The NANO Line - .025" Contact Spacing

Specifications

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

•Contact Rating - 1 amp max.

•Minimum contact centers - 0.025 (0.64).

•Wire sizes - #32 AWG stranded, #30 AWG solid.

•Contact termination - integral pigtail or multiple indent crimp.

•Contact rentention - fixed via epoxy.

•Contact materials - socket: nickel silver.

pin bundle: precious metal alloy or BeCu.

pin Sleeve: nickel silver or cartridge brass.

Type Single Row

Strip

NTP NDM NJS NJSC

Metal Shell

Rectangular

Center Jackscrew

Alum. alloy

2024 T351 per

QQ-A-250 or

6061-T6 per

QQ-A-200

nickel plate

Phenolic Phenolic Polyester

- Precious metal per ASTM B477 and ASTM B541, or BeCu per CDA alloy 172 & 102 -

- Nickel silver/ASTM B122, Comp. B-

- Nickel silver per ASTM B122, Comp. B or Cartridge Brass per CDA alloy 260 -

1-40

Contacts

9, 15, 21, 25

31, 37

9, 24, 44

Circular

Center Jackscrew

Polyester

27, 72, 266

Shell

Insulator

No. of Contacts

Pin Bundle

Material

Socket Sleeve

Material

Pin Sleeve

Material

• Mating/unmating force - 6oz. per contact max.

Test Data

30 milliohms maximum

80 milliohms maximum

The table below summarizes the results of key tests

performed in accordance with MIL-STD-202, where

applicable. Data is applicable to standard connec-

tor with standard terminations. Variations may

affect this data, so please consult the factory for

further information on your requirements.

Dielectric Withstanding

Voltage

Method 301:

350 VAC at sea level

100 VAC at 70,000' altitude

Method 302, Condition A

Insulation Resistance

Thermal Shock

Physical Shock

Vibration

Durability

Moisture Resistance

Salt Spray

Contact Resistance

Contact Retention

Method 107, Condition B:

-65˚C to +125˚C

Method 213, Condition I:

100 G's, 3-axes, 6 millisecond

duration sawtooth pluse

Method 204, Condition D:

15 G's, 10-2,000 Hz, 12 hours

500 cycles of mating and

unmating, 500 CPH max.

Method 106, omit 7b

Method 101, Condition B:

48 hours

Method 307:

At 1 amp

At 100 milliamps

No breakdown

5,000 megohms minium

No physical damage

No physical damge

No loss of continuity > 1 µ sec

No physical damge

No loss of continuity > 1 µ sec

No mechanical or electrical defect

Insulation resistance > 100 megohms

Shall be capable of mating and unmating,

and meet contact resistance requirements

With gold plated Be-

Cu Nanopin contact.

With precious metal

alloy Nanopin contact.

}

60 milliohms maximum

3 lb. minimum axial load

Test Method Criteria of Acceptance

NANO contacts incorporate the highly reli-

able Twist Pin concept, which allows conti-

nuity in very dense areas and under severe

shock and vibration, requiring low engage-

ment and separation forces. Termination

can consist of uninsulated pigtails or insu-

lated wire all pre-harnessed at our factory

to your specifications.

Due to various industry application require-

ments the NANO line is available in several

different configurations, available in strip,

metal shell and plastic, rectangular or cir-

cular configurations with center jackscrew.

Successful applications for NANO connec-

tors are many and varied, from the Air

Force's AIRS program to actual human

implantations in the medical research field.

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Strip Connectors - .025" Contact Spacing NT

How to Order - NT

SERIES

NT P 2 40 S H * * *

SERIES

Nano Strip

40 Maximum - .025 (0.64) centers

20 Maximum - .050 (1.27) centers

L- Solid uninsulated wire

T- One piece contact/lead

H- Insulated harness wire

For termination code, see NJS section,

page 73.

P- Pin (Plug)

S- Socket (Receptacle)

P- Phenolic

1 - Contacts on .025 (0.64) centers

2 - Contacts on .050 (1.27) centers

INSULATOR MATERIAL

CONTACT LOCATION

INSULATOR MATERIAL

CONTACT LOCATION

CONTACT ARRANGEMENTS

CONTACT TYPE

TERMINATION TYPE

MODIFICATION CODE

TERMINATION MODIFICATION

RoHS COMPLIANCE

Dimensions

NTP

.025 (0.64) TYP.

.055

(1.40)

MAX. B

.055

(1.40)

MAX.

.055

(1.40)

MAX.

.025 (0.64) TYP.

.080

(2.03)

.160

(4.06)

MAX.

.025 (0.64) TYP.

.220

(5.59)

MAX.

Plug - "H" and "L"

Termination Types Plug - "T"

Termination Types Receptacle - "H", "L", and "T"

Termination Types

NTPI-1*-**

NTPI-2*-**

NTPI-3*-**

NTPI-4*-**

NTPI-5*-**

NTPI-6*-**

NTPI-7*-**

NTPI-8*-**

NTPI-9*-**

NTPI-10*-**

NTPI-11*-**

NTPI-12*-**

NTPI-13*-**

NTPI-14*-**

NTPI-15*-**

NTPI-16*-**

NTPI-17*-**

NTPI-18*-**

NTPI-19*-**

NTPI-20*-**

NTPI-21*-**

NTPI-22*-**

NTPI-23*-**

NTPI-24*-**

NTPI-25*-**

NTPI-26*-**

NTPI-27*-**

NTPI-28*-**

NTPI-29*-**

NTPI-30*-**

NTPI-31*-**

NTPI-32*-**

NTPI-33*-**

NTPI-34*-**

NTPI-35*-**

NTPI-36*-**

NTPI-37*-**

NTPI-38*-**

NTPI-39*-**

NTPI-40*-**

.025 (0.64)

.050 (1.27)

.075 (1.91)

.100 (2.54)

.125 (3.18)

.150 (3.81)

.175 (4.45)

.200 (5.08)

.225 (5.72)

.050 (1.27)

.075 (1.91)

.100 (2.54)

.125 (3.18)

.150 (3.81)

.175 (4.45)

.200 (5.08)

.225 (5.72)

.250 (6.35)

.275 (6.99)

.250 (6.35)

.275 (6.99)

.300 (7.62)

.325 (8.26)

.350 (8.89)

.375 (9.53)

.400 (10.16)

.425 (10.80)

.450 (11.43)

.475 (12.07)

.300 (7.62)

.325 (8.26)

.350 (8.89)

.375 (9.53)

.400 (10.16)

.425 (10.80)

.450 (11.43)

.475 (12.07)

.500 (12.70)

.525 (13.34)

.500 (12.70)

.525 (13.34)

.550 (13.97)

.575 (14.61)

.600 (15.24)

.625 (15.88)

.650 (16.51)

.675 (17.15)

.700 (17.78)

.725 (18.42)

.550 (13.97)

.575 (14.61)

.600 (15.24)

.625 (15.88)

.650 (16.51)

.675 (17.15)

.700 (17.78)

.725 (18.42)

.750 (19.05)

.775 (19.69)

.750 (19.05)

.775 (19.69)

.800 (20.32)

.825 (20.96)

.850 (21.59)

.875 (22.23)

.900 (22.86)

.925 (23.50)

.950 (24.13)

.975 (24.77)

.800 (20.32)

.825 (20.96)

.850 (21.59)

.875 (22.23)

.900 (22.86)

.925 (23.50)

.950 (24.13)

.975 (24.77)

1.000 (25.40)

1.025 (26.04)

±.010 (0.25)

Ref.

Part Number

by Insulator Size

Ref.

Part Number

by Insulator Size

Ref.

Part Number

by Insulator Size

Ref.

Part Number

by Insulator Size

±.010 (0.25)

NANO D Metal Shell - .025" Contact Spacing NDM

How to Order - NDM

www.ittcannon.com

SERIES

9, 15, 21, 25, 31, 37

NDM - NANO D Metal Shell

P = Pin (Plug)

S = Socket (Receptacle)

H= Insulated harness wire

L= Solid copper

T = One piece contact/lead

To specifiy lead lengths, type and mechanical

modifications consult customer service.

CONTACT ARRANGEMENTS

CONTACT TYPE

TERMINATION TYPE

MODIFICATION CODE

NDM- 9 P T * *

RoHS COMPLIANCE

Dimensions

.025 (0.64) TYP.

Plug

Receptacle

.130

(3.30) MAX

.150 (3.81)MAX.

.155 (3.94) MAX.

.051 +_ .004

(1.30+_ 0.10)

.083 +_ .004

(2.11 +_ 0.10)

DIA.TYP.

.083 +_ .004

(2.11 +_ 0.10)

DIA.TYP.

.004 +_ .004

(1.12+_ 0.10)

.175 (4.44)

MAX.

.205 (5.21)

MAX.

Part Number

By Shell Size

NDM-9P*/S*

NDM-15P*/S*

NDM-21P*/S*

NDM-25P*/S8

NDM-31P*/S*

NDM-37P*/S*

.200 (5.08)

.350 (8.89)

.500 (12.7)

.600 (15.24)

.750 (19.05)

.900 (22.86)

.317 (8.05)

.467 (11.86)

.617 (15.67)

.717 (18.21)

.867 (22.02)

1.017 (25.83)

.380 (9.65)

.530 (13.46)

.680 (17.27)

.780 (19.81)

.930 (23.62)

1.080 (27.43)

.565 (14.35)

.715 (18.16)

.865 (21.97)

.965 (24.51)

1.115 (28.32)

1.265 (32.13)

.725 (18.42)

.875 (22.23)

1.025 (26.04)

1.125 (28.58)

1.275 (32.39)

1.425 (36.20)

Ref.

±.005 (0.13)

Max.

Plug

Ref.

Receptacle

Ref.

Consult customer service for availability of other sizes.

Panel Mounting Dimensions

.565 (14.35)

.715 (18.16)

.865 (21.97)

.965 (24.51)

1.115 (28.32)

1.265 (32.13)

.261 (6.63)

.411 (10.44)

.561 (14.25)

.661 (16.79)

.811 (20.60)

.961 (24.41)

.095 (2.41)

Size

±.005 (0.13)

+ .005 (0.13)

- .000 (0.00)

+ .005 (0.13)

- .000 (0.00)

.032 (0.81) R TYP.

.086 ± .004

(2.18 ± 0.10)

DIA. TYP

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

NDM

www.ittcannon.com

Center Jackscrew - .030" Contact Spacing NJS

How to Order - NJS

SERIES

NJS - Nano center jackscrew rectangular (9,

24, 44)

NJSC - Nano center jackscrew circular (27, 72

266)

(H) 001 = 18" #32 AWG 7/40 strd. Type

"ET" Teflon per MIL-W-16878/6,

color yellow.

(H) 003 = 18" #32 AWG 7/40 strd. Type

"ET" Teflon per MIL-W-16878/6

color coded to MIL-STD-681, Sys-

tem 1.

(L) 1 = 1/2" uninsulated solid #30 AWG

gold plated copper.

(L) 2 = 1" uninsulated solid #30 AWG gold

plated copper

(T)* = Consult customer service

9, 24, 27, 44, 72, 266

P = Pin (Plug)

S = Socket (Receptacle)

H = Insulated harness wire

L= Solid uninsulated wire

T = One piece contact/Lead

* See Termination Codes shown below for additional length modification codes.

CONTACT ARRANGEMENTS

CONTACT TYPE

TERMINATION TYPE

TERMINATION CODE

TERMINATION CODE*

NJS - 24 P H * * *

RoHS COMPLIANCE

Standard Wire Termination Codes

The following termination codes are listed for your information. For additional codes please refer to Appendix on page 80 and 82. All wire lengths ae minimum.

Harness Type (H)

Length

3 (76.2)

6 (152.4)

8(203.2)

10(254.0)

12(304.8)

18(457.2)

20 (508.0)

H020

H019

H026

H029

H028

H001

H038

H027

H016

H034

H025

H002

H003

H023

24 (609.6)

30(762.0)

36 (914.4)

48(1219.2)

72(1828.8)

120 (3048.0)

H009

H010

H011

H013

H017

H042

H004

H005

H006

H048

H046

H041

L61

L56

L57

L39

L58

.125 (3.18)

.150(3.81)

.190(4.83)

.250(6.35)

.375 (9.53)

.500 (12.70)

L14

L16

L10

.750(19.05)

1.000 (25.40)

1.500 (38.10)

2.000 (50.80)

2.500 (63.50)

3.000 (76.20)

All YellowColorCodedLength All YellowColorCodedLengthCode LengthCode

#32 AWG, 7/40 stranded,Type "ET"per MIL-W-16878/6

SolidUninsulatedType (L)

#32 AWG gold plated copper.

NJS-9P*

NJS-9S*

NJS-24P*

NJS-24S*

NJSC-266

NJSC-72

NJSC-44

NJSC-27

Part Number

Face View Pin Insert

0-80 UNF-2B

THREADED INSERT

Receptacle Side View Plug Side View

.255 (6.48)

.435 (11.05)

Max.

NJS-9 & NJS-24

.165 (4.19)

Max.

.138 (3.51)

.078 (1.98)

.138 (3.51)

.078 (1.98)

±.005 (0.13)

.116 (2.95)

±.005 (0.13)

Center Jackscrew/Rectangular

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Center Jackscrew - .030" Contact Spacing NJS

Contacts

.060 (1.52) MAX.

EPOXY WICKING

SOCKET

CONTACT

.062 (1.57)

REF.

.011

(.28)

REF.

PIN CONTACT

WITH THRU-BUNDLE

PIGTAIL

.011

(.28)

REF.

.100 (2.54) MAX

EPOXY

WICKING .

EPOXY RETAINING

CONTACT INSULATOR

0.90 ± .010

(2.29 ± 0.25)

GUIDE POST

(OPTIONAL WITH LOSS OF CONTACT

NOTE: Guide posts can be installed in any contaact cavity for polarization purposes.

Socket View Pin View

(Thru-Bundle Contact)

Pin View

(Crimp-Type Contact)

Connector Saver

.128

(3.25)

REF.

#0-80 UNF-2A

.062

(1.57)

REF.

Part Number: NJS97294-835

GUIDE POST

CAVITY

(open)

NJS-9P &S

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Custom Cable Assemblies

Dynamic Custom Cable Assemblies

for Harsh Environments

ITT has been a world leader in designing

and manufacturing harsh environment

micro interconnects and cable assem-

blies for over fifty years. In addition, our

historical product and assembly expert-

ise dates back over 85 years to the

founding of the original ITT Cannon.

Today, we provide complete turnkey

cable assemblies for all of ITT’s micro

connector portfolio including: Cent Line

Interconnects, MDM series, M83513

Series, MEB series, MDM Mixed Signal

Packages, MT strip interconnects, micro

miniaturecircular MIK series, and our

high density Nano Connectors. Our

cable assembly expertise has allowed

ITT to develop innovative Six Sigma

driven manufacturing processes that

allows our customers a full breadth of

tight pitch cable assemblies in 0.100,

0.075, 0.050, and 0.025 contact spacing.

ITT’s harsh environment interconnects

and cable assemblies are used in the

most demanding applications and envi-

ronments. You will find our products in

such markets as: Aerospace, Defense

Electronics, Geophysical Exploration,

High Speed Computer Networking,

Industrial Automation, Medical

Electronics, Satellite and Space

Communications, and

Telecommunications. Our complete

interconnect solutions have flown on

every major Aircraft and Space platform

since the 1940’s. In fact, many aircraft

mechanics still refer to ITT Cannon con-

nector and cable assemblies as the

Aviation standard.

Our product portfolio has been devel-

oped and is continuing to be developed

to provide our customers with new and

better technologies that offer superior

system level performance while lowering

overall system level costs. Our corporate

culture in Six Sigma Methodologies

allows ITT to continuously challenge our

Engineering and Scientific professionals

to develop new processes and technolo-

gies in Material Science, Automation,

and Testing to ensure that our cus-

tomers get the best cost effective harsh

environment cable assemblies from ITT.

You should expect no less from an

Industry leader.

The following paragraphs highlight sev-

eral examples of interconnect cable

assemblies for various Market segments

that ITT services. These examples rep-

resent just a snapshot of the many cus-

tom micro interconnects or cable

assemblies that ITT can provide the

industry.

Custom Micro D and M83513

Interconnect cable

assemblies

As one of the original developers of the

Micro Interconnect technology, ITT has

been an industry innovator in providing

complete harsh environment cable

assemblies and stretching the state of

art in such areas as: Filtering, Hermetics,

moisturebarriers, High Speed and

Mixed Signal Packages, EMI suppres-

sion, and multiple cable types. Most of

ITT’s custom cable assemblies utilize our

standard Micro pin contact system.

However,ITT does use other types of

contact systems when manufacturing

mixed signal interconnect systems

where signal speed and power contacts

will be incorporated into a complete

cable assembly solution.

ITT manufactures complete cable

assemblies worldwide at locations in

Santa Ana California, Basingstoke UK,

and Nogales Mexico. The various engi-

neering and manufacturing centers of

excellence are utilized to best fit various

cable assembly and product platform

specialties to provide our customers

with the most cost effective solutions.

Space Grade Micro Interconnect

cable assemblies

ITT has been deciding and manufactur-

ing Space Rated interconnects and

cable assemblies since the beginning of

the US space Program in the mid 20th

century. Prior to the MIL DTL M83513

specification ITT had been qualified for

all NASA GSFC performance and speci-

fication requirements, on numerous

satellite and space launch systems. ITT’s

Engineering and Product teams have

over 200 years of combined experience

in design, manufacture, and test of

Space flight interconnects and cable

assemblies. Our expertise in material

science, manufacturing processes, out

gassing, testing and screening, Magnetic

permeability, and Cryogenics has given

ITT a tremendous understanding in

developing high reliability space system

interconnects and cable assemblies .

All of ITT’s Space rated micro intercon-

nect assemblies utilize ITT QPL M83513

connectors. These cable assemblies are

tested to meet the most stringent per-

formance requirements as outlined by

numerous NASA GSFC specifications.

Additional performance and test require-

ments beyond existing NASA GSFC

guidelines can always be tailored so that

additional custom test programs can be

incorporated.

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Custom Cable Assemblies

High Temperature Harsh Environment

Interconnect Assemblies

The proliferation of deep water drilling

prospects in the world’s oceans has cre-

ated increased performance demands

for micro miniature interconnects and

cable assemblies for down hole oil field

exploration. Not only are new fields

being discovered in ocean depths

greater than five miles but the wells

themselves are being drilled deeper into

the earths crust, sometimes to depths of

30,000 feet. Thus, the temperature

extremes in excess of 200 degrees C are

becoming the norm. In this the most

demanding of environments, ITT has

been designing and manufacturing such

micro interconnect connector and cable

assemblies for over forty years. Again

our engineering and manufacturing

expertise in the material science of

Liquid Crystal Polymer (LCP), flourosili-

cones, plating, metals, and high temper-

atureepoxies is leading ITT to develop

high temperature performance beyond

200 degree C operating temperatures.

Pictured below is an ITT high tempera-

turenano interconnect assembly.ITT is

developing new products around this

nano interconnect platform that will not

only increase signal density but will

include new material’s and processes for

higher temperature applications.

Medical Electronics Cable

Assemblies:

As microminiaturization continues in the

medical technologies field so the contri-

butions of ITT’s micro interconnect

devices and assemblies. Our custom

medical assemblies are utilized in such

applications as: patient monitoring, diag-

nostics, imaging, and disposable sys-

tems. These types of application have

been well served by ITT’s Nano, MT strip

and MIKQ series of interconnects. In

addition to there specific connector

types, ITT is well experienced in the

careful selection of medical grade cables

and termination materials to ensure fully

compliant med. cal cable assemblies.

Shown below is an example of ITT’s

MIKQ high strength plastic circular

quick disconnect connector cable

assembly for a medical application.

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Flex Circuit Cable Assembly

Terminating to Flexible Circuits

Ideally, for a low profile and a neat finish, it is

best to terminate flexible circuits in line with

the contacts. Since most Microminiature

connectors have contacts set into two or

three rows, termination is a simple process.

The diagrams opposite are basically a design

guide for pad arrangements, to suit MDM con-

nectors in particular and to ensure the circuits

enter the potting well. The length of the pad is

optional but of course it is important to pro-

vide enough coverlay,especially at the edges

of the circuit, to avoid de-lamination. Wesug-

gest at least 0,51 mm (.020 inches). Our stan-

dard potting shrouds provide support to the

circuit with a dimension of 7,00 mm (.275

inches) from the rear of the flange.

Please consult Customer Service for specific

flex circuit assembly design considerations

and requirements.

0,51 (.020)

2,16 (.085)

1,27 (.050)

0,51 (.020)

COVERLAY

EXTENDS

INTO

POTTING

6,99

(.275)

4,98

(.196)

2,00 (.079)/1,53 (060)

FIRST POTTING LEVEL

TO RETAIN CONTACTS

Diagram 1 shows details of the pad spacing and the

suggested amount of material to be left between the

end of the pad A and the edge of the ﬂex B.

Diagram 2 illustrates how the connector is

prepared with short pigtails and a special ﬁrst

pot which just captures the contacts. The ﬁnal

back potting for strength is controlled by our

standard 7,00 (.275) potting ﬁxtures.

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Custom Back Shells

Custom Back Shell Systems

ITT has designed numerous back shell solutions for

micro miniature interconnects for many harsh envi-

ronment applications. Although ITT does not offer a

standard back shell portfolio today, we can design

and manufacture a range of back fittings for our

MDM connector products depending on the cus-

tomer requirements. Utilizing one of our partnership

relationships, one of our UK based micro product

groups of ITT can provide can provide custom

designs utilizing proven banded systems in which

the braid is captivated over a chimney style outlet.

These types of back shell systems are available in

different material finishes and sizes and can be pro-

vided with special process termination methods. In

addition, ITT has developed a method of riveting the

back fitting to the shell within the jacking area. This

option guarantees 360 degree shielding effective-

ness even when jackscrews or jacking posts are not

being used.

Where a conduit system is preferred such as for test

box environments in field locations, back fittings and

afully screened weatherproof convoluted trunking

can be provided

Inaddition to the above ITT can provide special

back potting style termination systems for environ-

mental protection and strain relief. These types of a

back shell style system are typically filled with epoxy

orother encapsulating materials to provide a robust

and effective back shell system.

Sealing Gaskets

Wehave received requests for gasket materials to seal the MDM connectors into various enclosures. We recommend that you consider wider flanged connectors

together with a low cost conductive gasket to provide an adequate surface area. This combination will give you IP-66 sealing with good EMC compliance. The follow-

ing dimensions for gaskets and flange dimensions are regarded as the minimum that you should consider.

Conductive elastomers generally offer a superior shielding performance when compared with alternatives as in table below.

Gasket Type Neoprene (wire

impregnated)

Silicone (wire

impregnated)

Silicone

(oriented wire)

Neoprene

(fabric wrap)

Metallic

finger stock

Metallic fibres Conductive

silicone rubber

Shielding performance S S GGGGG

Temperature range SG G SGGG

IP sealing P P S S P P G

Compression force GGGGGS S

Compression range S S S G G P S

Surface texture P P GPGP S

Compression set S S S S GPG

Re-usability S S S S GP G

*Neoprene is a trademark of Dupont P = Poor S = Satisfactory G = Good

Conductive rubber gaskets can be loaded with many different metallic fillers but the choice of material is dependent upon a number of factors such as level of con-

ductivity,shielding effectiveness, galvanic compatibility and cost.

Galvanic Corrosion can occur when two dissimilar metals are in contact with one another in the presence of an electrolyte. The type of gasket material has to be

assessed because of the use of metallic fillers. Many applications aredry indoor environments where corrosion is not a major concern. However, for external use,

particularly marine, it is recommended that consideration be given to compatibility. The table on the next page is a summary.

Enclosure Material Silver/Nickel Silver/Copper Silver/aluminum Inert aluminum Silver/Glass Silver Nickel/Graphite Nickel

aluminum alloys X X l▲X X l l

Magnesium alloys X X l l X X l l

Stainless steel ▲▲▲▲▲▲▲▲

Copper alloys ▲▲▲▲▲▲▲▲

Cadmium plating X X l l X X l l

Tin plating lXl▲l l ▲ ▲

Nickel plating ▲l l ▲▲▲▲▲

Chromium plating ▲▲▲▲▲▲▲▲

Silver plating ▲▲▲▲▲▲▲▲

Zinc & galvanise plating X X l l X X l l

Titanium ▲▲▲▲▲▲▲▲

▲=good l=Satisfactory X = Not recommended

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

“L” Code Chart

SORTED BY LENGTH

Wire Length, IN.

Decimal Fraction Code

0.080 L63

0.094 3/32 L62

0.110 L65

0.125 1/8 L61

0.140 L67

0.150 L56

0.171 L66

0.187 3/16 L17

0.190 L57

0.210 L59

0.250 1/4 L39

0.312 3/8 L60

0.375 3/8 L58

0.380 L64

0.500 1/2 L1

0.625 5/8 L12

0.750 3/4 L4

1.000 L2

1.500 L7

2.000 L6

2.250 L25

2.500 L16

3.000 L10

3.500 L15

4.000 L11

4.500 L28

5.000 L9

6.000 L3

7.000 L8

8.000 L18

9.000 L45

10.000 L13

11.500 L52

12.000 L4

15.000 L46

18.000 L55

20.000 L5

#25AWG, SOLID COPPER WIRE PER QQ-W-343,

TYPE “S”, GOLD PLATED PER MIL-G-45204, TYPE

II GRADE C OR D, CLASS 1 (50 MICROINCHES

MINIMUM)

SORTED BY CODE

Wire Length, IN.

Code Decimal Fraction

L1 0.500 1/2

L2 1.000

L3 6.000

L4 12.000

L5 20.000

L6 2.000

L7 1.500

L8 7.000

L9 5.000

L10 3.000

L11 4.000

L12 0.625 5/8

L13 10.000

L14 0.750 3/4

L15 3.500

L16 2.500

L17 0.187 3/16

L18 8.000

L25 2.250

L28 4.500

L39 0.250 1/4

L45 9.000

L46 15.000

L52 11.500

L55 18.000

L56 0.150

L57 0.190

L58 0.375 3/8

L59 0.210

L60 0.312 5/16

L61 .0125 1/8

L62 0.094 3/32

L63 0.080

L64 0.380

L65 0.110

L66 0.171

L67 0.140

Appendix

Nano “L” Code Charts on page 80.

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Appendix

“L” Code Chart (for Nano products only)

SORTED BY LENGTH

Wire Length, IN.

Decimal Fraction Code

0.080 L63

0.094 3/32 L62

0.110 L65

0.125 1/8 L61

0.140 L67

0.150 L56

0.171 L66

0.187 3/16 L17

0.190 L57

0.210 L59

0.250 1/4 L39

0.312 3/8 L60

0.375 3/8 L58

0.380 L64

0.500 1/2 L1

0.625 5/8 L12

0.750 3/4 L4

1.000 L2

1.500 L7

2.000 L6

2.250 L25

2.500 L16

3.000 L10

3.500 L15

4.000 L11

4.500 L28

5.000 L9

6.000 L3

7.000 L8

8.000 L18

9.000 L45

10.000 L13

11.500 L52

12.000 L4

15.000 L46

18.000 L55

20.000 L5

SORTED BY CODE

Wire Length, IN.

Code Decimal Fraction

L1 0.500 1/2

L2 1.000

L3 6.000

L4 12.000

L5 20.000

L6 2.000

L7 1.500

L8 7.000

L9 5.000

L10 3.000

L11 4.000

L12 0.625 5/8

L13 10.000

L14 0.750 3/4

L15 3.500

L16 2.500

L17 0.187 3/16

L18 8.000

L25 2.250

L28 4.500

L39 0.250 1/4

L45 9.000

L46 15.000

L52 11.500

L55 18.000

L56 0.150

L57 0.190

L58 0.375 3/8

L59 0.210

L60 0.312 5/16

L61 .0125 1/8

L62 0.094 3/32

L63 0.080

L64 0.380

L65 0.110

L66 0.171

L67 0.140

#30AWG, SOLID COPPER WIRE PER QQ-W-343,

TYPE “S”, GOLD PLATED PER MIL-G-45204, TYPE

II GRADE C OR D, CLASS 1 (50 MICROINCHES

MINIMUM)

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Appendix

“H” Code Charts

16878/4

Wire, Electrical, Polyetrafluorethylene (PTFE)

Insulated, 200 Degrees C, 600 Volts, Extruded

Insulation

Length Yellow White System 1

1030 C30 A30

2024 C24 A24

3 020 C20 027

4 – C33 033

5 031 C31 A31

6 019 047 016

8 026 C26 034

9015 C15 A15

10 029 C29 025

12 028 008 002

16 039 C39 A39

17 036 C36 A36

18 001 044 003

20 038 C38 023

21 055 C55 A55

24 009 045 004

30 010 C10 005

35018 C18 A18

36011 058 006

40 037 C37 A37

42 012 021 A12

48 013 C13 048

50 040 C40 A40

60 014 C14 056

72 017 059 046

80 032 C32 A32

92 022 C22 A22

96 035 C35 A35

120 042 C42 041

180 043 C43 A43

22759/11-26

Wire, Electrical, Fluoropolymer-Insulated, Extruded

TFE, Silver-Coated Copper Conductor, 600 Volt

10Color

Length White Repeat System 1

1G30 Y30 H30

2G24 Y24 H24

3 G20 Y20 H20

4 G33 Y33 H33

5 G31 Y31 H31

6 065 Y19 072

8 G26 Y26 H26

9 G15 Y15 H15

10 G29 Y29 H29

12 066 Y28 073

16 G39 Y39 H39

17 G36 Y36 H36

18 067 Y01 074

20 G38 Y38 H38

21 G55 Y55 H55

24 068 Y09 075

30 G10 Y10 H10

35 G18 Y18 H18

36 069 Y11 076

40 G37 Y37 H37

42 G12 Y12 H12

48 070 Y13 077

50 G40 Y40 H40

60 G14 Y14 H14

72 071 Y17 078

80 G32 Y32 H32

92 G22 Y22 H22

96 G35 Y35 H35

120 G42 Y42 H42

180 G43 Y43 H43

22759/33-26

Wire, Electrical, Fluoropolymer-Insulated, Crosslinked

Modified, ETFE, Lightweight, Silver-Coated, High-

Strength Copper Alloy 200 Degrees C, 600 Volt

10Color

Length White Repeat System 1

1V30 W30 X30

2V24 W24 X24

3V20 W20 X20

4V33 W33 X33

5V31 W31 X31

6V19 W19 X19

8 V26 W26 X26

9 V15 W15 X15

10 V29 W29 X29

12 V28 W28 X28

16 V39 W39 X39

17 V36 W36 X36

18 V01 W01 X01

20 V38 W38 X38

21 V55 W55 X55

24 V09 W09 X09

30 V10 W10 X10

35V18 W18 X18

36 V11 W11 X11

40 V37 W37 X37

42 V12 W12 X12

48 V13 W13 X13

50 V40 W40 X40

60 V14 W14 X14

72 V17 W17 X17

80 V32 W32 X32

92 V22 W22 X22

96 V35 W35 X35

120 V42 W42 X42

180 V43 W43 X43

Nano “H” Code Charts on page 82.

www.ittcannon.com

Appendix

“H” Code Charts (for Nano products only)

MIL-W-16878/6

Wire, Electrical, Polyetrafluorethylene (PTFE)

Insulated, 200 Degrees C, 250 Volts, Extruded

Insulation

Length Yellow White System 1

1030 C30 A30

2024 C24 A24

3020 C20 027

4– C33 033

5031 C31 A31

6 019 047 016

8026 C26 034

9 015 C15 A15

10 029 C29 025

12 028 008 002

16 039 C39 A39

17 036 C36 A36

18 001 044 003

20 038 C38 023

21 055 C55 A55

24 009 045 004

30 010 C10 005

35 018 C18 A18

36011 058 006

40037 C37 A37

42 012 021 A12

48 013 C13 048

50 040 C40 A40

60 014 C14 056

72 017 059 046

80 032 C32 A32

92 022 C22 A22

96 035 C35 A35

120 042 C42 041

180 043 C43 A43

www.ittcannon.com

Reference Data

PIN MIL-STD-681 Base First Second Third PIN MIL-STD-681 Base First Second Third

No. No. Color Stripe Stripe Stripe No. No. Color Stripe Stripe Stripe

1* 0 BLK 51 957 WHT GRN VIO

2* 1 BRN 52 958 WHT GRN GRY

3* 2 RED 53 967 WHT BLU VIO

4* 3 ORN 54 968 WHT BLU GRY

5* 4 YEL 55 978 WHT VIO GRY

6* 5 GRN 56 9012 WHT BLK BRN RED

7* 6 BLU 57 9013 WHT BLK BRN ORN

8* 7 VIO 58 9014 WHT BLK BRN YEL

9* 8 GRY 59 9015 WHT BLK BRN GRN

10* 9 WHT 60 9016 WHT BLK BRN BLU

11 90 WHT BLK 61 9017 WHT BLK BRN VIO

12 91 WHT BRN 62 9018 WHT BLK BRN GRY

13 92 WHT RED 63 9023 WHT BLK RED ORN

14 93 WHT ORN 64 9024 WHT BLK RED YEL

15 94 WHT YEL 65 9025 WHT BLK RED GRN

16 95 WHT GRN 66 9026 WHT BLK RED BLU

17 96 WHT BLU 67 9027 WHT BLK RED VIO

18 97 WHT VIO 68 9028 WHT BLK RED GRY

19 98 WHT GRY 69 9034 WHT BLK ORN YEL

20 901 WHT BLK BRN 70 9035 WHT BLK ORN GRN

21 902 WHT BLK RED 71 9036 WHT BLK ORN BLU

22 903 WHT BLK ORN 72 9037 WHT BLK ORN VIO

23 904 WHT BLK YEL 73 9038 WHT BLK ORN GRY

24 905 WHT BLK GRN 74 9045 WHT BLK YEL GRN

25 906 WHT BLK BLU 75 9046 WHT BLK YEL BLU

26 907 WHT BLK VIO 76 9047 WHT BLK YEL VIO

27 908 WHT BLK GRY 77 9048 WHT BLK YEL GRY

28 912 WHT BRN RED 78 9056 WHT BLK GRN BLU

29 913 WHT BRN ORN 79 9057 WHT BLK GRN VIO

30 914 WHT BRN YEL 80 9058 WHT BLK GRN GRY

31 915 WHT BRN GRN 81 9067 WHT BLK BLU VIO

32 916 WHT BRN BLU 82 9068 WHT BLK BLU GRY

33 917 WHT BRN VIO 83 9078 WHT BLK VIO GRY

34 918 WHT BRN GRY 84 9123 WHT BRN RED ORN

35 923 WHT RED ORN 85 9124 WHT BRN RED YEL

36 924 WHT RED YEL 86 9125 WHT BRN RED GRN

37 925 WHT RED GRN 87 9126 WHT BRN RED BLU

38 926 WHT RED BLU 88 9127 WHT BRN RED VIO

39 927 WHT RED VIO 89 9128 WHT BRN RED GRY

40 928 WHT RED GRY 90 9134 WHT BRN ORN YEL

41 934 WHT ORN YEL 91 9135 WHT BRN ORN GRN

42 935 WHT ORN GRN 92 9136 WHT BRN ORN BLU

43 936 WHT ORN BLU 93 9137 WHT BRN ORN VIO

44 937 WHT ORN VIO 94 9138 WHT BRN ORN GRY

45 938 WHT ORN GRY 95 9145 WHT BRN YEL GRN

46 945 WHT YEL GRN 96 9146 WHT BRN YEL BLU

47 946 WHT YEL BLU 97 9147 WHT BRN YEL VIO

48 947 WHT YEL VIO 98 9148 WHT BRN YEL GRY

49 948 WHT YEL GRY 99 9156 WHT BRN GRN BLU

50 956 WHT GRN BLU 100 9157 WHT BRN GRN VIO

*10 colors repeat is the standard wire color code for 83513-Style connectors.

Appendix

MIL-STD-681 Wire Color Code

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Terminology

Adhesive dispensing: acomputer-controlled machine automatically dispenses epoxy adhesive.

Backmolding: this term refers to the process of transfer-molding epoxy performs into a old. The epoxy is heated and pressurized, much like

conventional plastic molding.

Backpotting: the application of epoxy to connector wire terminations for strain relief and sealing. Epoxy is dispensed with pneumatic

syringes. Standard Micro products have built-in potting wells to contain the epoxy, but optional potting in custom configurations is

accomplished with inexpensive molds.

Brady labels: wraparound adhesive labels for multi-conductor cable.

Breakout: the area where one or more cables are joined together. A breakout frequently requires splices and extra strain relief such as cable

ties or tubing.

Electrical testing: Hi-pot, insulation resistance, and continuity testing are standard tests for cable assemblies.

Etching: etching is a chemical process to prepare certain types of Teflon insulated wire for potting. Without etching, the epoxy will not bond

properly.

Expando: braided sleeving used to protect a wire bundle. The simplest and least expensive method of jacketing a cable, expando tubing is

made of abrasion-resistant nylon or other materials. The ends of the tubing are usually encapsulated in epoxy.

Header: ageneral term for any printed circuit board mounted connector used as an I/O port.

Hot stamping: insulated wireis imprinted with identification numbers or text.

Hot-stamped heat shrink tubing: used for multi-conductor cables, heat shrink tubing is impression stamped, then installed on the cable and

shrunk.

Ink-jet marking: dots of ink are sprayed through a stationary nozzle onto a part moving on a conveyer. Ink jet marking is now standard.

Ink-stamping: the traditional method of placing metal type in a marking machine which is inked with a roller. The metal type transfers the ink

to a rubber pad, and the part is pressed onto the pad. Oven curing is required.

Jumper Cable: this term usually applies to a short cable assembly that plugs into a printed circuit board one one end, with the other end

mounted in an I/O panel.

Lacing: the process of tying individual wires together into bundles. Special lacing tape is used.

Laser stripping: insulation is removed from the wire by using a special laser stripping machine. Typically used on flat cable.

Mass-termination: simultaneous termination of multiple contacts. Normally associated with IDC termination, mass termination is also used on

micropins in a special multi-contact crimp tool.

Pigtail: asingle-ended cable assembly having one connector on one end and unterminated wireon the other end.

Potting: the application of various adhesives to a connector. Potting encapsulates the wires or terminals, providing environmental sealing and

strain relief.

Silkscreening: Ink is transferred through a screen.

Stripping: insulation is removed from wireends on automatic cut and strip equipment.

Thermal Shock: aconditioning environmental test that cycles a part repeatedly through a specified temperature range. Thermal shock is fre-

quently performed prior to pressuretesting.

Tinning: the application of molten solder to connector terminals. Microproducts aretinned on a fully automatic machine with cleaning, pre-

heating and inert gas tinning. Pre-tinned leads ensureexcellent solderabillity.

Wire marking: individual numbered adhesive tags are attached to each wire.

Wire striping: insulated wire from #24 thru #28 AWG is striped with colors for circuit identification.

Wiring fixtures: flat wiring boards or morecomplicated three-dimensional fixtures are required for many multi-branched cable harnesses.

Mating connectors arefixtured in the exact position of the end use equipment, and the cable assembly is built on the fixture.

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

THIS NOTE MUST BE READ IN CON-

JUNCTION WITH THE PRODUCT DATA

SHEET/CATALOG. FAILURE TO

OBSERVE THE ADVICE IN THIS INFOR-

MATION SHEET AND THE OPERATING

CONDITIONS SPECIFIED IN THE PROD-

UCT DATA SHEET/ CATALOG COULD

RESULT IN HAZARDOUS SITUATIONS.

1. MATERIAL CONTENT AND PHYSICAL

FORM

Electrical connectors do not usually contain

hazardous materials. They contain conduct-

ing and non-conducting materials and can be

divided into two groups.

a) Printed circuit types and low cost audio

types which employ all plastic insulators and

casings.

b) Rugged, Fire Barrier and High Reliability

types with metal casings and either natural

rubber, synthetic rubber, plastic or glass

insulating materials. Contact materials vary

with type of connector and also application

and are usually manufactured from either:

Copper, copper alloys, nickel, alumel,

chromel or steel. In special applications,

other alloys may be specified.

2. FIRE CHARACTERISTICS AND ELEC-

TRIC SHOCK HAZARD

There is no fire hazard when the connec-

tor is correctly wired and used within the

specified parameters. Incorrect wiring or

assembly of the connector or careless

use of metal tools or conductive fluids, or

transit damage to any of the component

parts may cause electric shock or burns.

Live circuits must not be broken by sepa-

rating mated connectors as this may

cause arcing, ionization and burning.

Heat dissipation is greater at maximum

resistance in a circuit. Hot spots may occur

when resistance is raised locally by damage,

e.g. cracked or deformed contacts, broken

strands of wire. Local overheating may also

result from the use of the incorrect applica-

tion tools or from poor quality soldering or

slack screw terminals. Overheating may

occur if the ratings in the product Data

Sheet/Catalog are exceeded and can cause

breakdown of insulation and hence electric

shock. If heating is allowed to continue it

intensifies by further increasing the local

resistance through loss of temper of spring

contacts, formation of oxide film on contacts

and wires and leakage currents through car-

bonization of insulation and tracking paths.

Fire can then result in the presence of com-

bustible materials and this may release nox-

ious fumes. Overheating may not be visually

apparent. Burns may result from touching

overheated components.

3. HANDLING

Care must be taken to avoid damage

to any component parts of electrical connec-

tors during installation and use. Although

there are normally no sharp edges, care

must be taken when handling certain compo-

nents to avoid injury to fingers. Electrical

connectors may be damaged in transit to the

customers, and damage may result in cre-

ation of hazards. Products should therefore

be examined prior to installation/use and

rejected if found to be damaged.

4. DISPOSAL

Incineration of certain materials may release

noxious or even toxic fumes.

5. APPLICATION

Connectors with exposed contacts should

not be selected for use on the current supply

side of an electrical circuit, because an elec-

tric shock could result from touching exposed

contacts on an unmated connector. Voltages

in excess of 30 V ac or 42.5 V dc are poten-

tially hazardous and care should be taken to

ensure that such voltages cannot be trans-

mitted in any way to exposed metal parts of

the connector body. The connector and

wiring should be checked, before making

live, to have no damage to metal parts or

insulators, no solder blobs, loose strands,

conducting lubricants, swarf, or any other

undesired conducting particles. Circuit resist-

ance and continuity check should be made to

make certain that there are no high resist-

ance joints or spurious conducting paths.

Always use the correct application tools as

specified in the Data Sheet/Catalog. Do not

permit untrained personnel to wire, assemble

or tamper with connectors. For operation

voltage please see appropriate national reg-

ulations.

IMPORTANT GENERAL INFORMATION

(i) Air and creepage paths/Operating volt-

age. The admissible operating voltages

depend on the individual applications and the

valid national and other applicable safety

regulations.

For this reason the air and creepage path

data are only reference values. Observe

reduction of air and creepage paths due to

PC board and/or harnessing.

(ii) Temperature

All information given are temperature limits.

The operation temperature depends on the

individual application.

(iii) Other important information

Cannon continuously endeavors to improve

their products. Therefore, Cannon products

may deviate from the description, technical

data and shape as shown in this catalog and

data sheets.

“Engineered for life” is a registered trade-

trademarks or registered trademarks are

property of their respective owners. All data

subject to change without notice.

Product Safety Information

D-Subminiature Connectors

Fiber Optic Connectors and Cable Assemblies

Rack and Panel Connectors

Microminiature Connectors

Circular/Filter/Hermetic Connectors

Pioneered by Cannon during the 1930s, our Rack & Panel

Connectors offer an unmatched variety of shell configurations and

insert arrangements, as well as materials, plating and contact

options. Today, we are recognized as an industry leader, offering

an unparalleled range of off-the-shelf and custom Rack & Panel

products to align with customer needs.

As a world leader in circular, filter, and hermetic connectors,

ITT

can leverage its design and manufacturing expertise to fit

virtually any application. Our expertise includes fast positive

mating for a wide range of military applications, as well as

numerous sizes and contact configurations for various harsh

environments.

Cannon invented D-sub connectors in 1952. Our family

of D-Subs now includes combinations of signal, power and

RF, as

well as severe service sealed connectors. Cannon D-Subs are

available with an extensive line of backshells and accessories

and are one of the most economical shielded connector

solutions available.

Cannon fiber optic solutions provide an excellent

performance/

cost value. Performance may be tailored to the end system, with

our use of superior materials and bonding agents providing

highly effective solutions. Our wide variety of products include

fiber optic hybrid contacts, multi-channel, rack and panel and hi-

rel assemblies.

Developed first by Cannon in the 1960s, Microminiature Connectors

offer high performance and reliability with exceptional versatility.

Available in rectangular, circular and strip-style configurations for

countless applications, many of our highly engineered

Microminiature connector products meet critical customer demands

in multiple applications across the Aerospace & Defense industry.

RF Connectors

ITT Cannon has been providing interconnect products to the

Microwave and RF industry since 1963 (formerly The Sealectro

Corporation). The RF 50 & 75 Ohm product lines cover UHF band

through Ku band requirements. These connectors and cable

assemblies are available with a thread type, snap type, bayonet

type or slide on coupling method. The frequencies range from DC

to 18+ GHz.

ITT Cannon is a leading global manufacturer of connector products serving international

customers in the aerospace and defense, medical, energy, transportation and industrial end

markets. Whether delivering critical specs to aircraft pilots, streaming data through

communications satellites or enabling ultrasound technology that gives an expectant mother the

first glimpse of her unborn child, Cannon connects the world’s most important information with the

people who need it. To learn more, visit www.ittcannon.com

Cannon Microminiature

Connectors Customer

Support Locations

ASIA

Tuopandun Industrial Area, Jinda Cheng,

Xiner Village, Shajing Town,

Baoan District, Shenzhen City,

Guangdong, China 518125

Phone: 86.755.2726.7888

Fax: 86.755.2726.7515

GERMANY

Cannonstrasse 1

Weinstadt, 71384

phone: 49.7151.699.0

fax: 49.7151.699.217

ITALY

Corso Europa 41/43

Lainate (MI),

Italy 20020

phone: 39.02938721

fax: 39.0293872300

Jays Close, Viables Estate

Basingstoke, RG22 4BA

phone: 44.1256.311200

fax: 44.1256.323356

USA

56 Technology Drive

Irvine, CA 92618

phone: 1.800.854.3028

fax: 1.714.628.2142

www.ittcannon.com

“Engineered for life” and “Cannon” are registered trademarks of ITT Inc.

Specification and other data are based on information available at the time of

printing, and are subject to change without notice.

Our facility is not currently certified by the DLA and this product is not covered

by the QPL/QML.

Cannon

Microminiature

Connectors

Electronic Components