2 APEMwww.apem.com
FP series
Fully illuminated pushbutton switches - momentary or latching
Distinctive features and specifications
❑❑ Suited for integrated designs
❑❑ Large but lightweight
❑❑ Pad printed or laser etched symbols
❑❑ Full actuator or symbol illumination, adaptable to design
requirements
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load : 200mA 12VDC
• Initial contact resistance : 50 mΩ max.
• Insulation resistance : 1 GΩ min. at 500VDC
• Dielectric strength : 1.000 Vrms 50 Hz min.
• Electrical life at full load : 300.000 cycles
MATERIALS
• Case : stanyl PA46
• Actuator : PA12
• Bushing/ bezel : PA66
• Contacts : silver, gold plated
(code 4)
• Multi-wire lead AWG22
• Terminal seal : epoxy or termelt
overmolding
GENERAL SPECIFICATIONS
• Panel thickness : 1(.039) to 18 mm (.708) max.
• Total travel : 2,8 mm ± 0,5 mm
• Typical operating force : 8N ± 2N
• Mechanical life : 1 million cycles
• Torque : 3 Nm max. applied to nut
• Operating temperature : -40°C to +75°C
Pad printing
Non-illuminated
Laser
Illuminated
Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.
Tolerance : The general tolerance for dimensions in this brochure is ± 0,3 (.012).
Dimensions, specifications and data shown in this brochure are subject to change without notice.
APEM www.apem.com 3
FP series
Fully illuminated pushbutton switches - momentary or latching
Overview
FP
SERIES
Model
AThreaded bushing,
dia. 24 mm
Actuator
PRound, flat
RRound, curved
Electrical function
1OFF - ON
3Normally open
(NO)
LED control and No of poles
ANon-illuminated, 1 pole
BNon-illuminated, 2 poles
CIndependent, 1 pole
DIndependent, 2 poles
Contact mat.
4Silver, gold
plated
Silver on request.
Terminals
1Solder lugs
2Straight cable
3Right angle
cable, length
300 mm
Actuator colour
1Blue
2Black
3Green
4Grey
5Yellow
6Red
7White/natural
9Orange
AMaroon
BBlack lacquered
ABOUT THIS SERIES
On the following pages, you will find successively :
model structure of switches and options in the same order as in above chart
Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.
Mounting accessories : Standard hardware supplied : 1 hex nut and 1 O-Ring
Packaging unit : solder lug versions : 20 pieces - cable versions : 1 piece
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
Bezel colour
1Blue
2Black
3Green
4Grey
5Yellow
6Red
7White/natural
LED colour
XNon-illum.
ABlue
BGreen
CRed
DYellow
EWhite
FRed/green
GRed/blue Marking
XNo marking
1Pad printing
2Laser
Symbols
See end of series
LED resistor
0No resistor
supplied
112V resistor
224V resistor
348V resistor
4 APEMwww.apem.com
FP series
Fully illuminated pushbutton switches - momentary or latching
Mounting by Ø 24 mm threaded bushing
MODEL
STRUCTURE
• Three terminal types
• Curved or flat actuator
To order a product, replace • with one of the codes selected under “LED control
and number of poles”
on next page, then add he desired options.
Solder lug terminals
LATCHING
Curved actuator
FPAR1•1 OFF - ON
Flat actuator
FPAP1•1 OFF ON
MOMENTARY (NO)
Curved actuator
FPAR3•1
Flat actuator
FPAP3•1
Straight cable terminals
Right angle cable terminals
LATCHING
Curved actuator
FPAR1•2 OFF - ON
Flat actuator
FPAP1•2 OFF ON
MOMENTARY (NO)
Curved actuator
FPAR3•2
Flat actuator
FPAP3•2
LATCHING
Curved actuator
FPAR1•3 OFF - ON
Flat actuator
FPAP1•3 OFF ON
MOMENTARY (NO)
Curved actuator
FPAR3•3
Flat actuator
FPAP3•3
APEM www.apem.com 5
FP series
Fully illuminated pushbutton switches - momentary or latching
Options
LED CONTROL AND NUMBER OF POLES
Complete the model numbers on previous pages with one of the following codes.
Non-illuminated
one pole
A
Function 3 (momentary)Function 1 (latching)
Non-illuminated
two poles
B
Independent
one pole
C
Function 3 (momentary)Function 1 (latching)
Independent
two poles
D
CONTACT MATERIALS
4Silver, gold plated
Silver : on request.
ACTUATOR COLOUR
1: blue - 2: black - 3: green - 4: grey - 5: yellow - 6: red - 7: white/natural
9: orange - A: maroon - B: black,
lacquered
BEZEL COLOUR
1: blue - 2: black - 3: green - 4: grey - 5: yellow
6: red - 7: white/natural - 8: bright chrome
LED COLOUR
X: non-illuminated
A: blue - B: green - C: red - D: yellow - E: white - F: red/green - G: red/blue
FP series
Fully illuminated pushbutton switches - momentary or latching
Options
MARKING
LED RESISTOR
XNo marking
1Pad printing
2Laser
0No resistor supplied
112V resistor
224V resistor
348V resistor
SYMBOLS
XX No symbol
Available symbols
See following pages.
Marking colour
White marking for illuminated actuators (laser etching) and non-illuminated
black actuators (pad printing). Black marking for non-illuminated colour
actuators (pad printing). Other : on request.
Marking area
The symbol will be included in the hatched area.
www.apem.com APEM6
APEM www.apem.com 7
FP series
Fully illuminated pushbutton switches - momentary or latching
Symbols
CODE SYMBOL DESCRIPTION
XX None -
-
-
-
-
Stop
Motion
Up motion
CODE SYMBOL DESCRIPTION CODE SYMBOL DESCRIPTION
Revolving light
Rear
ventilator
Heating
(0637)
Door
opening
Windshield
demister/defroster
(0635)
Windshield
wiper
(0086)
Windshield
washer
(0088)
Ventilator fan
(0089)
16
17
18
19
20
21
22
23
03
04
05
06
07
08
09
Most symbols meet the ISO 7000 standard “graphical symbols for use on equipments” (code given in bracket in the
description). Contact us for symbols not featured in the following tables.
Legend scale :
Depending on space available on the product (see “Symbols” section).
-
-
02
01
Down motion
Hot
Cold
Hazard warning
(0085)
10
11
12
13
Traveller
lighting
14
Driver
lighting
(1421
15
Side mirror
defroster
Restarting
pump
Front
fog lights
(0633)
Rear
fog lights
(0634)
24
25
26
27
28 Propulsion
system trim
Electric motor
(0011)
31
Anchor
Beacon
(1141)
30
29
Emergency first
aid vehicle
(2565)
Load tipping
(1557)
Loading light
(2457)
Tractor, rear-ward
(1667)
Combine,
direction of
movement (1678)
Use no forks
(2406)
32
33
34
35
36
37
Transmission
(1166)
38
Working spot
light
(1145)
39
Engine
(0640)
Horn
(0244)
40
41
Lock
(1656)
Taxi sign light
(2551)
Working light
(1204)
Working light
symmetric
(1204)
-
-
42
43
44
45
46
47
8 APEMwww.apem.com
FP series
Fully illuminated pushbutton switches - momentary or latching
Symbols
Most symbols meet the ISO 7000 standard “graphical symbols for use on equipments” (code given in bracket in the
description). Contact us for symbols not featured in the following tables.
Legend scale :
Depending on space available on the product (see “Symbols” section).
CODE SYMBOL DESCRIPTION
All wheel
drive
48
CODE SYMBOL DESCRIPTION
Indicator
64
Brake release
65
Baggage room
left door
66
Baggage room
right door
67
Power blinds
68
Engine
idle control
69
Cruise
res/set
70
Driver windows
up/down
71
Middle door
opening
72
Front door
opening
73
Lighting in
baggage room
74
Cruise on/off
75
TV
76
Pump
77
Toilet
78
Toilet
decontamination
79
CODE SYMBOL DESCRIPTION
Front windshield
heating
80
Aus
81
Radiator
fan
82
Remove
retarder
83
Restricted
speed
84
Preheater
85
ABS detection
86
ECAS detection
87
Engine stop
88
Cruise
res/cancel
89
ECAS reset
90
Driver windows
heating
91
Cruise set
92
Air bag
up/down
93
Read lighting
94
Lighting
main switch
95
Differential lock
(1662)
49
-
50
-
51
-
-
Rear window
wiper
(0097)
Rear window
washer
(0099)
52
53
54
55
Lower load
(2223)
Cab lock
(1560)
56
57
Extraction
58
Pumping in
59
Rear PTO
(1572)
60
Front PTO
61
Rockshaft down
62
Rockshaft up
63
APEM www.apem.com 9
FP series
Fully illuminated pushbutton switches - momentary or latching
Symbols
Most symbols meet the ISO 7000 standard “graphical symbols for use on equipments” (code given in bracket in the
description). Contact us for symbols not featured in the following tables.
Legend scale :
Depending on space available on the product (see “Symbols” section).
CODE SYMBOL DESCRIPTION
Heating
using water
96
Low beam
97
Position
lights
98
Diesel
acceleration
99
Manual
mode
Clockwise
cabin rotation
Anticlockwise
cabin rotation
-
A1
A2
A3
A4
-
Parking
brake
A5
A6
-
A7
-
A8
-
A9
-
AA
-
AB
-
AC
CODE SYMBOL DESCRIPTION
-
AD
-
AE
-
AF
Battery charging
condition
(0247)
AG
Turn signals
(0084)
AH
High beam
(0082)
AJ
Differential lock,
bogie
(2600)
AK
Brushing with a
rotating brush
(0070)
AL
Differential lock,
transfer case 4x4
(2475)
AM
Loader bucket,
float
(1441)
AN
Loader bucket
(1437)
AP
Rear window
washer & wiper
(0098)
AQ
Header
Header drive
(1579)
AR
Excavator/backhoe
boom side shift
(2091)
AS
Chemical water
treatment
(1851)
AT
Grapple skidder,
single funct° boom
(1762)
AU
CODE SYMBOL DESCRIPTION
-
AV
-
AW
-
AY
-
AZ
-
B1
-
B2
-
B3
F P 1 1 0 5 - A .
