CS340602 CS341202 Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Fast Recovery Single Diode Modules 20 Amperes/600-1200 Volts A B L H K F C A L J ] E D G - DIA. A G .250 TAB F C K CS340602, CS341202 Fast Recovery Single Diode Modules 20 Amperes/600-1200 Volts Description: Powerex Fast Recovery Single Diode Modules are designed for use in applications requiring fast switching. The modules are isolated for easy mounting with other components on common heatsinks. POW-R-BLOKTM has been tested and recognized by Underwriters Laboratories (QQQX2 Power Switching Semiconductors). Features: M Isolated Mounting M Planar Chips A K M UL Recognized A Applications: Outline Drawing M Inverters Dimension A B Inches 1.54 1.1890.008 Millimeters 0.94 24 D 0.77 19.5 E 0.65 16.5 F 0.28 7 H M Switching Power Supplies 32.20.2 C G M Choppers 39 M Free Wheeling Ordering Information: Select the complete eight digit module part number you desire from the table below. Example: CS341202 is a 1200 Volt, 20 Ampere Fast Recovery Single Diode Module. 0.1650.004 Dia. Dia. 4.20.1 0.16 4.2 J 0.14 3.7 K 0.12 3.2 L 0.02 0.4 Type CS34 Voltage Volts (x100) Current Rating Amperes (x10) 06 12 02 D-5 http://store.iiic.cc/ Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CS340602, CS341202 Fast Recovery Single Diode Modules 20 Amperes/600-1200 Volts Absolute Maximum Ratings Characteristics Symbol Peak Reverse Blocking Voltage VRRM VRSM Transient Peak Reverse Blocking Voltage (Non-Repetitive), t < 5ms DC Reverse Blocking Voltage DC Current, TC = 115C Peak One-Cycle Surge (Non-Repetitive) On-State Current (60Hz) Peak One-Cycle Surge (Non-Repetitive) On-State Current (50Hz) I2t (for Fusing), 8.3 milliseconds Storage Temperature Operating Temperature Maximum Mounting Torque M4 Mounting Screw Module Weight (Typical) V Isolation CS341202 Units 600 1200 Volts 720 1350 Volts VR(DC) IF(DC) 480 960 20 20 Amperes IFSM IFSM 400 400 Amperes 365 365 Amperes I2t 667 667 A2sec TSTG Tj -40 to 125 -40 to 125 C -40 to 150 -40 to 150 -- -- VRMS D-6 http://store.iiic.cc/ CS340602 12 Volts C 12 in.-lb. 25 25 Grams 2500 2500 Volts Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CS340602, CS341202 Fast Recovery Single Diode Modules 20 Amperes/600-1200 Volts Electrical and Thermal Characteristics, Tj = 25C unless otherwise specified Characteristics Symbol Test Conditions Blocking State Maximums Reverse Leakage Current, Peak IRRM Tj = 150C, VRRM = Rated 5.0 mA Conducting State Maximums Peak On-State Voltage VFM IFM = 20A 1.5 Volts trr IFM = 20A, Tj = 150C di/dt =-50A/ms, VR = 1/2 VRRM IFM = 20A, Tj = 150C 0.8 ms Switching Minimums Reverse Recovery Time Reverse Recovery Charge Qrr CS340602/CS341202 15 Units mC di/dt =-50A/ms, VR = 1/2 VRRM Thermal Maximums Thermal Resistance, Junction-to-Case Thermal Resistance, Case-to-Sink (Lubricated) Ru(J-C) Ru(C-S) Per Module 1.2 C/Watt Per Module 0.8 C/Watt D-7 http://store.iiic.cc/ Powerex, Inc., 200 Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 CS340602, CS341202 Fast Recovery Single Diode Modules 20 Amperes/600-1200 Volts MAXIMUM ALLOWABLE CASE TEMPERATURE, TC, (oC) 500 2.2 1.8 1.4 1.0 0.6 10-1 100 101 400 300 200 100 0 100 102 101 INSTANTANEOUS ON-STATE CURRENT, IFM, (AMPERES) CYCLES AT 60 HZ MAXIMUM ON-STATE POWER DISSIPATION (SINUSOIDAL WAVEFORM) REVERSE RECOVERY CHARACTERISTICS 102 40 30 20 100 Irr trr Qrr 0 0 10 AVERAGE ON-STATE CURRENT, IT(AV), (AMPERES) 20 100 100 101 INSTANTANEOUS ON-STATE CURRENT, IFM, (AMPERES) D-8 http://store.iiic.cc/ DC 130 120 110 10 20 AVERAGE ON-STATE CURRENT, IF(AV), (AMPERES) 101 10 140 0 VR = 600V di/dt = -50A/s Tj = 25oC Tj = 150oC 101 150 102 10-1 102 trr, (s) MAXIMUM PEAK SURGE (NON-REPETITIVE) CURRENT, IFSM, (AMPERES) Tj = 25oC TRANSIENT THERMAL IMPEDANCE, Zu(J-C)(t), (oC/WATT) 2.6 Irr, (AMPERES), Qrr, (C) INSTANTANEOUS ON-STATE VOLTAGE, VFM, (VOLTS) MAXIMUM POWER DISSIPATION, PAV(MAX), (WATTS) MAXIMUM ALLOWABLE CASE TEMPERATURE MAXIMUM ALLOWABLE PEAK SURGE (NON-REPETITIVE) CURRENT MAXIMUM ON-STATE CHARACTERISTICS TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (JUNCTION-TO-CASE) 101 100 2.0 1.6 1.2 0.8 0.4 0 10-3 10-2 10-1 TIME, t, (SECONDS) 100