S1A, S1B, S1D, S1G, S1J, S1K, S1M www.vishay.com Vishay General Semiconductor Surface Mount Glass Passivated Rectifier FEATURES * Low profile package * Ideal for automated placement * Glass passivated pellet chip junction * Low forward voltage drop Available * Low leakage current * High forward surge capability * Meets MSL level 1, per J-STD-020, LF maximum peak of 260 C SMA (DO-214AC) * AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 or P/NHM3 * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS TYPICAL APPLICATIONS IF(AV) 1.0 A VRRM 50 V, 100 V, 200 V, 400 V, 600 V, 800 V, 1000 V IFSM 40 A, 30 A EAS 5 mJ IR 1.0 A, 5.0 A VF 1.1 V TJ max. 150 C Package SMA (DO-214AC) Circuit configuration Single For use in general purpose rectification of power supplies, inverters, converters and freewheeling diodes for consumer, automotive, and telecommunication. MECHANICAL DATA Case: SMA (DO-214AC) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/N-M3 - halogen-free, RoHS-compliant, commercial grade Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified Base P/NHM3_X - halogen-free, RoHS-compliant and AEC-Q101 qualified ("_X" denotes revision code e.g. A, B,.....) Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3, M3, HE3, and HM3 suffix meets JESD 201 class 2 whisker test Polarity: color band denotes cathode end MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL Device marking code S1A S1B S1D S1G S1J S1K S1M UNIT SA SB SD SG SJ SK SM Maximum recurrent peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current (fig. 1) IF(AV) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM Non-repetitive peak reverse avalanche energy at 25 C, IAS = 1 A, L = 10 mH EAS 5 mJ TJ, TSTG -55 to +150 C Operating junction and storage temperature range 1.0 40 A 30 A Revision: 31-Jul-2018 Document Number: 88711 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 S1A, S1B, S1D, S1G, S1J, S1K, S1M www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage 1.0 A SYMBOL S1A S1B S1D TA = 25 C S1K S1M UNIT V 1.0 IR TA = 125 C S1J 1.1 VF Maximum DC reverse current at rated DC blocking voltage S1G 5.0 A 50 Typical reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 1.8 s Typical junction capacitance 4.0 V, 1 MHz CJ 12 pF THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance (1) S1A S1B S1D S1G S1J S1K S1M RJA 75 85 RJL 27 30 UNIT C/W Note (1) Thermal resistance from junction to ambient and from junction to lead mounted on PCB with 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pad areas ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE S1J-E3/61T 0.064 61T 1800 7" diameter plastic tape and reel S1J-E3/5AT 0.064 5AT 7500 13" diameter plastic tape and reel S1JHE3_A/H (1) 0.064 H 1800 7" diameter plastic tape and reel S1JHE3_A/I (1) 0.064 I 7500 13" diameter plastic tape and reel S1J-M3/61T 0.064 61T 1800 7" diameter plastic tape and reel S1J-M3/5AT 0.064 5AT 7500 13" diameter plastic tape and reel S1JHM3_A/H (1) 0.064 H 1800 7" diameter plastic tape and reel S1JHM3_A/I (1) 0.064 I 7500 13" diameter plastic tape and reel Note AEC-Q101 qualified (1) RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 100 Average Forward Current (A) Resistive or Inductive Load 1.0 S1A thru S1J 0.8 0.6 S1K, S1M 0.4 0.2 0.2" x 0.2" (5.0 mm x 5.0 mm) Thick Copper Pad Areas Peak Forward Surge Current (A) 1.2 TL = 110 C 8.3 ms Single Half Sine-Wave S1A thru S1J 10 S1K, S1M 0 0 0 20 40 60 80 100 120 140 160 1 10 100 Lead Temperature (C) Number of Cycles at 60 Hz Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Revision: 31-Jul-2018 Document Number: 88711 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 S1A, S1B, S1D, S1G, S1J, S1K, S1M www.vishay.com Vishay General Semiconductor 100 TJ = 25 C f = 1.0 MHz Vsig = 50 mVp-p Pulse Width = 300 s 1% Duty Cycle Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 1 TJ = 25 C 0.1 TJ = -40 C 0.01 0.4 0.8 1.2 10 1 0.01 1.6 0.1 Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics 10 100 Fig. 5 - Typical Junction Capacitance 10 1000 Transient Thermal Impedance (C/W) Instantaneous Reverse Current (A) 1 Reverse Voltage (V) TJ = 150 C 1 TJ = 75 C 0.1 TJ = 25 C 0.01 TJ = -40 C 20 40 60 80 S1A thru S1J 10 Units Mounted on 0.20" x 0.20" (5.0 mm x 5.0 mm) x 0.5 Mil. Inches (0.013 mm) Thick Copper Land Areas 1 0.01 0.001 0 S1K, S1M 100 100 0.1 1 10 100 t - Pulse Duration (s) Percent of Rated Peak Reverse Voltage (%) Fig. 4 - Typical Reverse Leakage Characteristics Fig. 6 - Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMA (DO-214AC) Cathode Band Mounting Pad Layout 0.110 (2.79) 0.100 (2.54) 0.065 (1.65) 0.049 (1.25) 0.177 (4.50) 0.157 (3.99) 0.012 (0.305) 0.006 (0.152) 0.060 (1.52) MIN. 0.208 (5.28) REF. 0.090 (2.29) 0.078 (1.98) 0.060 (1.52) 0.030 (0.76) 0.074 (1.88) MAX. 0.066 (1.68) MIN. 0.008 (0.203) 0 (0) 0.208 (5.28) 0.194 (4.93) Revision: 31-Jul-2018 Document Number: 88711 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000