0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors DF40 Series Space saving Space saving -%edh#!%#)bbe^iX]!&#*bb]Z^\]i (#(-bb *#%bb :m^hi^c\ egdYjXih 9;)% &-#+bb Features High contact reliability - effective mating length 0.45 mm 1. High density mounting H]dXVWhdgei^dcg^Wh In addition to its space saving design, several stack heights are available and add versatility to any application. Stack heights: 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm, 3.5 mm, and 4.0 mm. %#)*bb 2. Multiple stack height options &#*)#%bb S p a c e s av i n g d e s i g n t h a t h a s a m i n i mu m connector width, yet still retains a sufficient vacuum area for easy pick-and-place mounting Minimum width: 3.38 mm 3. High contact reliability Despite its small stature and low profile, the contacts deliver strong contact forces and an effective mating length of 0.45 mm on the 1.5 mm stacking height. This connector utilizes a locking system that prevents accidental unmating issues and emits a clear tactile click to ensure that mating has been completed. 4. Excellent self-aligning range The use of guide ribs allows 0.33 mm of selfalignment on this connector. 5. Reinforced structure with shock absorbing ribs Both sides of the connector have been reinforced with the addition of shock absorbing ribs. Nickel-plated barriers were added to protect the contact areas from potential solder wicking. 7. Contamination resistant design When mated, the connector's design covers the contacts which help to keep dust and other debris away from the contacts. The SMT leads are kept very close to the connector housing which also helps to prevent shorts caused by debris on the exposed contacts 8. RoHS compliant 9. High speed signal with noise prevention Standard type Stacking height 10 12 20 24 30 34 40 44 50 60 70 80 90 100 1.5 mm - 2.0 mm - - - - 2.5 mm - - - - - - - - 3.0 mm - - - - - - 3.5 mm - - - - - - - - 4.0 mm - - - - - - - - - : Products under development Shielded type Stacking height 30 48 70 No. of Contacts Environment friendly and does not use RoHS specified prohibited materials. All materials and substances used to produce these parts comply with the RoHS standards. Stacking height variations No. of Contact 6. Solder wicking prevention AdXhnhiZb &%edh#id*%edh# 1.5 mm - 3.0 mm - The shielded type can support high speed signal transmissions with noise prevention. 2013.11 1 DF40 Series0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors Product Specifications Ratings Rated Current 0.3A Rated Voltage AC,DC 30V Items Operating Temperature Range -35 85 (Note 1) Operating Humidity Range 20 80% Storage Temperature Range -10 60 (Note 2) Storage Humidity Range 40 70% (Note 2) Specifications Conditions 1. Insulation Resistance Minimum of 50 Mo Measured with DC 100 V 2. Withstanding Voltage No flashover or breakdown Apply AC 100 V for 1 minute 3. Contact Resistance Maximum of 90 mo Measured with AC 20 mV, 1 kHz and 1 mA 4. Vibration Resistance No electrical discontinuity of 1s or greater Frequency 10-55 Hz, half amplitude 0.75 mm, 3 directions for 2 hours 5. Humidity Resistance Contact resistance Maximum of 90 mo Insulation resistance Minimum of 25 mo Left at temperature 40 2c, humidity 90 to 95%, 96 hours 6. Temperature Cycles Contact resistance Maximum of 90 mo Insulation resistance Minimum of 50 mo (-55c: 30 minutes 5~35c: 10 minutes 85c: 30 minutes 5~35c: 10 minutes) 5 cycles 7. Durability Contact Resistance: Maximum of 90 mo 30 mating cycles 8. Soldering Heat Resistance Should be no melting of resin parts that affects its performance Reflow: according to the Recommended Temperature Profile Hand solder: Soldering iron temperature 350c, no more than 3 seconds. Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" here refers to products stored for a long period prior to board mounting and use. The operating temperature and humidity range covers the non-energized condition of connectors after board mounting and the temporary storage conditions during transportation, etc. Materials (Standard, non shielded type) Product Receptacle Header Component Insulator Contact Insulator Contact Materials LCP Phosphor bronze LCP Phosphor bronze Finish Black Gold plating Black Gold plating UL Regulation UL94V-0 --------------UL94V-0 --------------- Materials LCP Phosphor bronze Phosphor bronze LCP Phosphor bronze Phosphor bronze Finish Black Gold plating Gold plating Black Gold plating Gold plating UL Regulation UL94V-0 ----------------------------UL94V-0 ----------------------------- Materials (Shielded type) Product Receptacle Header 2 Component Insulator Contact Shield plate Insulator Contact Reinforcing metal fitting DF40 Series0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors Product Number Structure (Standard, non-shielded type) Refer to this page when determining product specifications by model types. Please place orders with part numbers listed in this catalog. The characteristics and specifications of the product described in this catalog are reference values. Please make sure to check the latest delivery specifications at the time of product use. Receptacle DF40 # - (**) - * DS - 0.4 V (**) Series Name: DF40 No. of Contacts Stacking height Display Stacking height Style None 1.5mm C: Without reinforcing metal fitting 2.0 2.0mm HC: Without reinforcing metal fitting 2.5 2.5mm (The H denotes a stacking 3.0 3.0mm height 2.5 mm or above) 3.5 3.5mm 4.0 4.0mm Connector Type DS: Double row receptacle Contact Pitch:0.4mm Mating direction Shape V: Vertical SMT Packaging Type (51) Embossed tape packaging Header DF40 # - * DP - 0.4 V (**) Series Name: DF40 No. of Contacts Contact Pitch: 0.4 mm Mating direction V: Vertical SMT Style Connector Type C: Without reinforcing metal fitting DP: Double row pin header Packaging Type (51) Embossed tape packaging Product Number Structure ( Shielded type) Refer to this page when determining product specifications by model types. Please place orders with part numbers listed in this catalog. The characteristics and specifications of the product described in this catalog are reference values. Please make sure to check the latest delivery specifications at the time of product use. Receptacle DF40 GB - (**) - * DS - 0.4 V (**) Stacking height Series Name: DF40 Style GB: With shield Display 1.5 3.0 Connector Type DS: Double row receptacle Stacking height 1.5mm 3.0mm Contact Pitch: 0.4 mm Mating direction V: Vertical SMT No. of Contacts Packaging Type (51) Embossed tape packaging Header DF40 GB - * DP - 0.4 V (**) Series Name: DF40 No. of Contacts Contact Pitch: 0.4 mm Style GB: With reinforcing metal fitting (For use with shielded product ) Connector Type DP: Double row pin header Mating direction V: Vertical SMT Packaging Type (51) Embossed tape packaging 3 DF40 Series0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors Receptacle (Stacking height 1.5 mm) A0.2 B0.08 3.380.2 2.880.2 P=0.40.05 0.120.02 D0.15 Vacuum pick up area : C0.2 BRecommended PCB layout 7%#%' &#*B6M %#%* % (#,- % '#(- "%#%* E2%#)%#%' %#'%#%' Stacking height 1.5 mm Specification No. (51): Embossed package 5,000 pieces per reel Unit: mm Part No. HRS No. No. of Contacts A B C D DF40C-10DS-0.4V(51) CL684-4036-2-51 10 4.6 1.6 1.0 1.45 DF40C-12DS-0.4V(51) Under development 12 5.0 2.0 1.0 1.45 DF40C-20DS-0.4V(51) CL684-4005-9-51 20 6.6 3.6 1.0 1.45 DF40C-24DS-0.4V(51) CL684-4006-1-51 24 7.4 4.4 1.2 1.45 DF40C-30DS-0.4V(51) CL684-4007-4-51 30 8.6 5.6 1.5 1.45 DF40C-34DS-0.4V(51) CL684-4023-0-51 34 9.4 6.4 2.3 1.45 DF40C-40DS-0.4V(51) CL684-4008-7-51 40 10.6 7.6 3.2 1.45 DF40C-50DS-0.4V(51) CL684-4009-0-51 50 12.6 9.6 3.2 1.45 DF40C-60DS-0.4V(51) CL684-4004-6-51 60 14.6 11.6 3.2 1.45 DF40C-70DS-0.4V(51) CL684-4016-5-51 70 16.6 13.6 3.2 1.45 DF40C-80DS-0.4V(51) CL684-4002-0-51 80 18.6 15.6 3.2 1.45 DF40C-90DS-0.4V(51) CL684-4124-8-51 90 20.6 17.6 3.2 1.45 DF40C-100DS-0.4V(51) CL684-4033-4-51 100 22.6 19.6 3.2 1.45 RoHS (Note 1) Please place orders by full reel quantities. (Note 2) The surface of the 60-100 pos. parts have a small, concave section that will not affect the vacuum pick up operation. (Note 3) PCB layout prohibited area. (Note 4) This connector is NOT polarized (Note 5) Some parts are available with metal fittings. Please contact a Hirose sales representative for more information. 4 DF40 Series0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors Receptacle (Stacking height 2.0 mm) A0.2 B0.08 3.380.2 2.940.2 P=0.40.05 0.120.02 D0.15 Vacuum pick up area : C0.2 BRecommended PCB layout 7%#%' &#*B6M %#%* % (#,- % '#(- "%#%* E2%#)%#%' %#'%#%' Stacking height 2.0 mm Specification No. (51): Embossed package 4,000 pieces per reel Unit: mm Part No. HRS No. No. of Contacts A B C D DF40C(2.0)-12DS-0.4V(51) CL684-4148-6-51 12 5.0 2.0 1.0 1.95 DF40C(2.0)-20DS-0.4V(51) CL684-4040-0-51 20 6.6 3.6 1.0 1.95 DF40C(2.0)-24DS-0.4V(51) CL684-4021-2-51 24 7.4 4.4 1.2 1.95 DF40C(2.0)-30DS-0.4V(51) CL684-4058-5-51 30 8.6 5.6 1.5 1.95 DF40C(2.0)-40DS-0.4V(51) CL684-4042-5-51 40 10.6 7.6 3.2 1.95 DF40C(2.0)-50DS-0.4V(51) CL684-4091-0-51 50 12.6 9.6 3.2 1.95 DF40C(2.0)-60DS-0.4V(51) CL684-4034-7-51 60 14.6 11.6 3.2 1.95 DF40C(2.0)-70DS-0.4V(51) CL684-4147-3-51 70 16.6 13.6 3.2 1.95 DF40C(2.0)-80DS-0.4V(51) CL684-4132-6-51 80 18.6 15.6 3.2 1.95 RoHS (Note 1) Please place orders by full reel (Note 2) The surface of the 60-100 pos. parts have a small, concave section that will not affect the vacuum pick up operation. (Note 3) PCB layout prohibited area. (Note 4)This connector is NOT polarized (Note 5) Some parts are available with metal fittings. Please contact a Hirose sales representative for more information. 5 DF40 Series0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors Receptacle (Stacking height 2.5 mm to 4.0 mm) A0.2 B0.08 3.380.2 2.940.2 P=0.40.05 0.120.02 D0.15 Vacuum pick up area : C0.2 BRecommended PCB layout 7%#%' %#.'B6M %#%* % (#,- % '#(- "%#%* E2%#)%#%' %#'%#%' Stacking height 2.5 mm Specification No. (51): Embossed package 3,000 pieces per reel Unit: mm Part No. HRS No. No. of Contacts A B C D DF40HC(2.5)-10DS-0.4V(51) Under development 10 4.6 1.6 1.0 2.4 DF40HC(2.5)-20DS-0.4V(51) CL684-4126-3-51 20 6.6 3.6 1.0 2.4 DF40HC(2.5)-40DS-0.4V(51) CL684-4112-9-51 40 10.6 7.6 3.2 2.4 DF40HC(2.5)-50DS-0.4V(51) CL684-4101-2-51 50 12.6 9.6 3.2 2.4 DF40HC(2.5)-60DS-0.4V(51) CL684-4085-8-51 60 14.6 11.6 3.2 2.4 Stacking height 3.0 mm RoHS Specification No. (51): Embossed package 3,000 pieces per reel Unit: mm Part No. HRS No. No. of Contacts A B C D DF40HC(3.0)-30DS-0.4V(51) CL684-4098-0-51 30 8.6 5.6 1.5 2.9 DF40HC(3.0)-44DS-0.4V(51) CL684-4076-7-51 44 11.4 8.4 3.2 2.9 DF40HC(3.0)-50DS-0.4V(51) CL684-4099-2-51 50 12.6 9.6 3.2 2.9 DF40HC(3.0)-60DS-0.4V(51) CL684-4100-0-51 60 14.6 11.6 3.2 2.9 DF40HC(3.0)-70DS-0.4V(51) CL684-4138-2-51 70 16.6 13.6 3.2 2.9 DF40HC(3.0)-80DS-0.4V(51) CL684-4180-9-51 80 18.6 15.6 3.2 2.9 DF40HC(3.0)-90DS-0.4V(51) CL684-4161-4-51 90 20.6 17.6 3.2 2.9 DF40HC(3.0)-100DS-0.4V(51) CL684-4151-0-51 100 22.6 19.6 3.2 2.9 RoHS (Note 1) Please place orders by full reel (Note 2) The surface of the 60-100 pos. parts have a small, concave section that will not affect the vacuum pick up operation (Note 3) PCB layout prohibited area. (Note 4) This connector is NOT polarized. (Note 5) Some parts are available with metal fittings. Please contact a Hirose sales representative for more information. 6 DF40 Series0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors Stacking height 3.5 mm Specification No. (51): Embossed package 2,000 pieces per reel Unit: mm Part No. HRS No. No. of Contacts A B C D DF40HC(3.5)-20DS-0.4V(51) CL684-4188-0-51 20 6.6 3.6 1.0 3.4 DF40HC(3.5)-30DS-0.4V(51) CL684-4136-7-51 30 8.6 5.6 1.5 3.4 DF40HC(3.5)-40DS-0.4V(51) CL684-4209-9-51 40 10.6 7.6 3.2 3.4 DF40HC(3.5)-50DS-0.4V(51) CL684-4109-4-51 50 12.6 9.6 3.2 3.4 DF40HC(3.5)-60DS-0.4V(51) CL684-4102-5-51 60 14.6 11.6 3.2 3.4 DF40HC(3.5)-80DS-0.4V(51) CL684-4162-7-51 80 18.6 15.6 3.2 3.4 Stacking height 4.0 mm RoHS Specification No. (51): Embossed package 2,000 pieces per reel Unit: mm Part No. HRS No. DF40HC(4.0)-40DS-0.4V(51) Under development No. of Contacts A B C D 40 10.6 7.6 3.2 3.9 DF40HC(4.0)-50DS-0.4V(51) Under development 50 12.6 9.6 3.2 3.9 DF40HC(4.0)-60DS-0.4V(51) CL684-4133-9-51 60 14.6 11.6 3.2 3.9 DF40HC(4.0)-80DS-0.4V(51) CL684-4140-4-51 80 18.6 15.6 3.2 3.9 DF40HC(4.0)-90DS-0.4V(51) CL684-4165-5-51 90 20.6 17.6 3.2 3.9 RoHS (Note 1) Please place orders by full reel (Note 2) The surface of the 60-100 pos. parts have a small, concave section that will not affect the vacuum pick up operation (Note 3) PCB layout prohibited area. (Note 4) This connector is NOT polarized. (Note 5) Some parts are available with metal fittings. Please contact a Hirose sales representative for more information. 7 DF40 Series0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors Receptacle (Stacking height 1.5 mm, with shield) < 30 contact > 3.380.3 8.640.3 6.480.1 5.60.08 P=0.40.05 0.20.02 0.120.02 Vacuum pick up area: 1.50.2 1.450.15 3.120.2 < 48 contact > 3.380.3 P=0.40.05 12.240.3 10.080.1 9.20.08 3.20.08 0.20.02 0.120.02 0.120.02 Vacuum pick up area: 3.20.2 1.450.15 3.120.2 BRecommended PCB layout 0.20.02 0.60.02 0.280.02 2.64-00.05 2.38-00.05 1.5MAX 0 4.08 3.7800.05 0.05 4.0800.05 2.64-00.05 P=0.40.02 10.080.02 9.20.02 3.20.02 0.60.02 0.60.02 0.20.02 Stacking height 1.5mm 4.0800.05 < 48 contact > 6.480.02 5.60.02 P=0.40.02 1.5MAX 2.38-00.05 3.7800.05 < 30 contact > 0.280.02 Specification No. (51): Embossed package 5,000 pieces per reel Unit: mm Part No. HRS No. No. of Contacts Signal contact Ground contact DF40GB(1.5)-30DS-0.4V(51) CL684-4198-4-51 30 30 4 DF40GB(1.5)-48DS-0.4V(51) CL684-4194-3-51 48 40 12 (Note 1) Please place orders by full reel (Note 2) PCB layout prohibited area. (Note 3) This connector is NOT polarized 8 RoHS DF40 Series0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors Receptacle (Stacking height 3.0 mm, with shield) < 48 contact > 3.380.3 P=0.40.05 12.240.3 10.080.1 9.20.08 3.20.08 0.20.02 0.120.02 0.120.02 Vacuum pick up area: 3.20.2 2.90.15 3.120.2 < 70 contact > 16.640.3 13.60.08 9.20.08 3.60.08 3.380.2 3.680.2 3.380.3 P=0.40.05 0.20.02 0.120.02 0.120.05 Vacuum pick up area: 3.20.2 2.90.15 3.120.2 BRecommended PCB layout < 70 contact > 14.480.02 13.60.02 9.20.02 3.60.02 10.080.02 9.20.02 0.20.02 0.60.02 0.280.02 0.20.02 2.64-00.05 4.0800.05 3.7800.05 2.38-00.05 P=0.40.02 0.60.02 2.64-00.05 4.0800.05 3.20.02 0.60.02 1.5MAX 4.0800.05 3.7800.05 2.38-00.05 P=0.40.02 0.60.02 Stacking height 3.0mm 0.60.02 0.60.02 4.0800.05 < 48 contact > 0.280.02 Specification No. (51): Embossed package 3,000 pieces per reel Unit: mm Part No. HRS No. No. of Contacts Signal contact Ground contact DF40GB(3.0)-48DS-0.4V(51) CL684-4197-1-51 48 40 12 DF40GB(3.0)-70DS-0.4V(51) CL684-4196-9-51 70 54 20 RoHS (Note 1) Please place orders by full reel (Note 2) The surface of the 70 pos. part have a small, concave section that will not affect the vacuum pick up operation (Note 3) This connector is NOT polarized. 9 DF40 Series0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors Header A0.2 B0.08 1.850.2 2.970.2 P=0.40.05 1.140.15 0.150.02 Vacuum pick up area : C0.2 BRecommended PCB layout 7%#%' %#%* % (#(, %#+*%#%' %#(%#%' % '#%* "%#%* E2%#)%#%' %#'(%#%' %#(*%#%' Unit: mm Part No. HRS No. No. of Contacts A B C DF40C-10DP-0.4V(51) CL684-4035-0-51 10 3.52 1.6 1.0 DF40C-12DP-0.4V(51) CL684-4149-9-51 12 3.92 2.0 1.0 DF40C-20DP-0.4V(51) CL684-4010-9-51 20 5.52 3.6 1.0 DF40C-24DP-0.4V(51) CL684-4011-1-51 24 6.32 4.4 1.2 DF40C-30DP-0.4V(51) CL684-4012-4-51 30 7.52 5.6 1.5 DF40C-34DP-0.4V(51) CL684-4024-3-51 34 8.32 6.4 2.3 DF40C-40DP-0.4V(51) CL684-4013-7-51 40 9.52 7.6 3.2 DF40C-44DP-0.4V(51) CL684-4077-0-51 44 10.32 8.4 3.2 DF40C-50DP-0.4V(51) CL684-4014-0-51 50 11.52 9.6 3.2 DF40C-60DP-0.4V(51) CL684-4003-3-51 60 13.52 11.6 3.2 DF40C-70DP-0.4V(51) CL684-4015-2-51 70 15.52 13.6 3.2 DF40C-80DP-0.4V(51) CL684-4001-8-51 80 17.52 15.6 3.2 DF40C-90DP-0.4V(51) CL684-4125-0-51 90 19.52 17.6 3.2 DF40C-100DP-0.4V(51) CL684-4032-1-51 100 21.52 19.6 3.2 RoHS (Note 1) Please place orders by full reel (Note 2) There are no concave parts on the header side contact part to increase the mating strength for 60 pos. or above. (Note 3) Use the contacts at the four corners as metal fittings. Do not use them as signal or power contacts. (Note 4) The surface of the 90 pos and higher parts have a small, concave section that will not affect the vacuum pick up operation (Note 5) This connector is NOT polarized. 10 DF40 Series0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors Header (For use with shielded product) A0.3 D0.1 E0.08 2.970.2 2.020.2 1.850.2 P=0.40.05 1.520.2 0.080.02 1.140.15 Vacuum pick up area: G0.2 0.150.02 BRecommended PCB layout D00.05 E-00.05 B0.02 F-00.05 C0.02 1.88-00.05 1.02-00.05 0.230.02 3.3200.05 2.4200.05 0.350.02 2.05-00.05 3.3700.05 P=0.40.02 Unit: mm Part No. HRS No. No. of Contacts A B C DF40GB-30DP-0.4V(51) CL684-4200-4-51 DF40GB-48DP-0.4V(51) CL684-4195-6-51 DF40GB-70DP-0.4V(51) CL684-4199-7-51 D E F G 10 7.16 6.67 12 10.76 10.27 5.6 8.74 7.32 6.12 1.5 9.2 12.34 10.92 9.72 3.2 20 15.16 14.67 13.6 16.74 15.32 14.12 3.2 RoHS (Note 1) Please place orders by full reel (Note 2) There are no concave parts of header side contact part to increase the mating strength for 60 pos. or above. (Note 3) This connector is NOT polarized. 11 DF40 Series0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors BEmbossed Carrier Tape Dimensions (JIS C 0806 compliant) 0 O1 3 O1.5 holes for feed mechanism O801 A B0.1 A0.3 0 O3802 12 0 .2 20.5 0 .8 1 F-F C0.1 F 20.1 Product label O2 1 0. + 0 .5 40.1 Reel Condition Dimensions 12 O1 1.750.1 Receptacle (Stacking height 1.5 mm) A G G E0.5 D1 0.20.05 .1 +00 5 0.7 H R 0.30.1 F G-G 1.650.15 H 80.1 Unreeling Direction .1 +0 0 .75 R0 Stacking height 1.5 mm Part No. Unit: mm A B C D E DF40C-10DS-0.4V(51) 16 - 7.5 21.5 17.5 DF40C-12DS-0.4V(51) 16 - 7.5 21.5 17.5 DF40C-20DS-0.4V(51) 16 - 7.5 21.5 17.5 DF40C-24DS-0.4V(51) 16 - 7.5 21.5 17.5 DF40C-30DS-0.4V(51) 24 - 11.5 29.5 25.5 DF40C-34DS-0.4V(51) 24 - 11.5 29.5 25.5 DF40C-40DS-0.4V(51) 24 - 11.5 29.5 25.5 DF40C-50DS-0.4V(51) 24 - 11.5 29.5 25.5 DF40C-60DS-0.4V(51) 24 - 11.5 29.5 25.5 DF40C-70DS-0.4V(51) 32 28.4 14.2 37.5 33.5 DF40C-80DS-0.4V(51) 32 28.4 14.2 37.5 33.5 DF40C-90DS-0.4V(51) 44 40.4 20.2 49.5 45.5 DF40C-100DS-0.4V(51) 44 40.4 20.2 49.5 45.5 DF40GB(1.5)-30DS-0.4V(51) 24 - 11.5 29.5 25.5 DF40GB(1.5)-48DS-0.4V(51) 24 - 11.5 29.5 25.5 (Note 1) For 10-60 contact position parts, the carrier tape only has one row of holes. The carrier for parts with 70 contacts and above has two rows of holes. 12 DF40 Series0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors BEmbossed Carrier Tape Dimensions (JIS C 0806 compliant) 1.750.1 Receptacle (Stacking height 2.0 mm to 2.5 mm) B0.1 A0.3 0 O801 0 12 12 O1.5 holes for feed mechanism O3802 0 .8 1 C0.1 .2 O2 .1 +0 0 20.5 0 .5 H Product label H-H O1 3 O1 40.1 20.1 Reel Dimensions G G E0.5 D1 .1 +0 0 Unreeling Direction 5 0.7 J 0.30.1 H J F0.15 0.20.05 80.1 R G-G .1 +00 .75 R0 Stacking height 2.0 mm Part No. DF40C(2.0)-12DS-0.4V(51) DF40C(2.0)-20DS-0.4V(51) DF40C(2.0)-24DS-0.4V(51) DF40C(2.0)-30DS-0.4V(51) DF40C(2.0)-40DS-0.4V(51) DF40C(2.0)-50DS-0.4V(51) DF40C(2.0)-60DS-0.4V(51) DF40C(2.0)-70DS-0.4V(51) DF40C(2.0)-80DS-0.4V(51) A 16 16 16 24 24 24 24 32 32 Stacking height 2.5 mm Part No. DF40HC(2.5)-10DS-0.4V(51) DF40HC(2.5)-20DS-0.4V(51) DF40HC(2.5)-40DS-0.4V(51) DF40HC(2.5)-50DS-0.4V(51) DF40HC(2.5)-60DS-0.4V(51) B - - - - - - - 28.4 28.4 C 7.5 7.5 7.5 11.5 11.5 11.5 11.5 14.2 14.2 D 21.5 21.5 21.5 29.5 29.5 29.5 29.5 37.5 37.5 E 17.5 17.5 17.5 25.5 25.5 25.5 25.5 33.5 33.5 Unit: mm F 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 Unit: mm A 16 16 24 24 24 B C D E F 7.5 21.5 17.5 2.72 - 7.5 21.5 17.5 2.72 - 11.5 29.5 25.5 2.72 - 11.5 29.5 25.5 2.72 - 11.5 29.5 25.5 2.72 - (Note 1) For 10-60 contact position parts, the carrier tape only has one row of holes. The carrier for parts with 70 contacts and above has two rows of holes. 13 DF40 Series0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors BEmbossed Carrier Tape Dimensions (JIS C 0806 compliant) 1.750.1 Receptacle (Stacking height 3.0 mm to 4.0 mm) Product label O801 O3802 B0.1 A0.3 0 12 O1.5 holes for feed mechanism 12 0 0 .8 1 C0.1 .2 20.5 0 H-H O2 .1 +0 0 .5 H O1 3 O1 40.1 20.1 Reel Condition Dimensions G G E0.5 D1 .1 +00 J 5 0.7 R 0.40.1 H J F0.15 0.20.05 80.1 G-G Unreeling Direction .1 +00 .75 R0 Stacking height 3.0 mm Part No. A B DF40HC(3.0)-30DS-0.4V(51) DF40HC(3.0)-44DS-0.4V(51) DF40HC(3.0)-50DS-0.4V(51) DF40HC(3.0)-60DS-0.4V(51) DF40HC(3.0)-70DS-0.4V(51) DF40HC(3.0)-80DS-0.4V(51) DF40HC(3.0)-90DS-0.4V(51) DF40HC(3.0)-100DS-0.4V(51) DF40GB(3.0)-48DS-0.4V(51) DF40GB(3.0)-70DS-0.4V(51) 24 24 24 24 32 32 44 44 24 32 - - - - 28.4 28.4 40.4 40.4 - 28.4 C 11.5 11.5 11.5 11.5 14.2 14.2 20.2 20.2 11.5 14.2 D 29.5 29.5 29.5 29.5 37.5 37.5 49.5 49.5 29.5 37.5 E 25.5 25.5 25.5 25.5 33.5 33.5 45.5 45.5 25.5 33.5 Stacking height 3.5 mm Unit: mm F 3.15 3.15 3.15 3.15 3.15 3.15 3.15 3.15 3.15 3.15 Unit: mm Part No. A B C D E F DF40HC(3.5)-20DS-0.4V(51) 16 - 7.5 21.5 17.5 3.72 DF40HC(3.5)-30DS-0.4V(51) 24 - 11.5 29.5 25.5 3.72 DF40HC(3.5)-50DS-0.4V(51) 24 - 11.5 29.5 25.5 3.72 DF40HC(3.5)-60DS-0.4V(51) 24 - 11.5 29.5 25.5 3.72 Stacking height 4.0 mm Unit: mm Part No. A B C D E F DF40HC(4.0)-40DS-0.4V(51) 24 - 11.5 29.5 25.5 4.15 DF40HC(4.0)-50DS-0.4V(51) 24 - 11.5 29.5 25.5 4.15 DF40HC(4.0)-60DS-0.4V(51) 24 - 11.5 29.5 25.5 4.15 DF40HC(4.0)-80DS-0.4V(51) 32 28.4 14.2 37.5 33.5 4.15 DF40HC(4.0)-90DS-0.4V(51) 44 40.4 20.2 49.5 45.5 4.15 (Note 1) For 10-60 contact position parts, the carrier tape only has one row of holes. The carrier for parts with 70 contacts and above has two rows of holes. 14 DF40 Series0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors Reel Dimensions Product label 0 A B0.1 A0.3 0 12 12 C0.1 0 .8 1 O1.5 holes for feed mechanism A E0.5 G G O801 O2 20.5 O3802 F-F .2 .1 +0 0 F 0 .5 40.1 20.1 O1 3 O1 1.750.1 Header D1 H .1 +00 5 .7 O0 0.30.1 F G-G 1.340.15 0.20.05 H Unreeling Direction .1 +0 0 .75 O0 Unit: mm Part No. A B C D E DF40C-10DP-0.4V(51) 12 - 5.5 17.5 13.5 DF40C-12DP-0.4V(51) 12 - 5.5 17.5 13.5 DF40C-20DP-0.4V(51) 16 - 7.5 21.5 17.5 DF40C-24DP-0.4V(51) 16 - 7.5 21.5 17.5 DF40C-30DP-0.4V(51) 16 - 7.5 21.5 17.5 DF40C-34DP-0.4V(51) 24 - 11.5 29.5 25.5 DF40C-40DP-0.4V(51) 24 - 11.5 29.5 25.5 DF40C-44DP-0.4V(51) 24 - 11.5 29.5 25.5 DF40C-50DP-0.4V(51) 24 - 11.5 29.5 25.5 DF40C-60DP-0.4V(51) 24 - 11.5 29.5 25.5 DF40C-70DP-0.4V(51) 32 28.4 14.2 37.5 33.5 DF40C-80DP-0.4V(51) 32 28.4 14.2 37.5 33.5 DF40C-90DP-0.4V(51) 44 40.4 20.2 49.5 45.5 DF40C-100DP-0.4V(51) 44 40.4 20.2 49.5 45.5 DF40GB-30DP-0.4V(51) 16 - 7.5 21.5 17.5 DF40GB-48DP-0.4V(51) 24 - 11.5 29.5 25.5 DF40GB-70DP-0.4V(51) 24 - 11.5 29.5 25.5 (Note 1) For 10-60 contact position parts, the carrier tape only has one row of holes. The carrier for parts with 70 contacts and above has two rows of holes. 15 DF40 Series0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors BOperating Precautions 1. Recommended Solder Profile Temperature (c) 250 250c 220c 60 seconds or below 200 180c 150 150c 90 to 120 seconds 100 50 Normal temperature 0 50 100 150 200 250 300 Heating time (sec.) Conditions 1. Peak temperature 2. Heating part 3. Preheating part 4. Number of times Maximum of 250c Minimum of 220c within 60 seconds 150180c 90120 seconds Maximum of 2 cycles (Note 1) The temperature shows PCB surface temperature near the connector lead part. 2. Recommended hand solder conditions Soldering iron temperature 340 10c, solder time no more than 3 seconds 3. Recommended screen thickness: Opening ratio (pattern area ratio) Thickness: 0.12 mm Opening ratio: DS side 80% DP side 80% 4. Leaning of PCB 16 Max 0.02 mm at the center of connector (using both edges of connector as criteria) 5. Washing Cleaning/washing is not recommended for this connector. Cleaning agents can deteriorate the mechanical operation and the environmental resistance of this connector. 6. Precautions Do not mate or unmate these connectors until they are mounted, failure to follow this precaution can lead to deformation or damage to these connectors. Provide another form of support to the PCB, this connector was not designed to be the main form of support. Mating and unmating with excessive force can cause damage. Do not apply excessive amounts of flux as it may cause excess solder and flux wicking There may be a slight variance in the color of the molding between production lots, this variance will not affect the performance of the connector. Refer to the next page for the handling precautions when mating and unmating the connectors. If the connector becomes disconnected due to impact, a fall or a counterforce to the FPC, it may be necessary to hold the connector in place with an addition to the device's case or other cushioning material to hold the connector in place. DF40 Series0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors BPrecautions when connector mating DF40*-*DS-0.4V DF40*-*DS-0.4V Prior to mating, locate the guidance ribs and align the header. Do not apply excess force to the connector during mating. Doing so can lead to contact damage Make sure that the connector is parallel to the other side, it then will drop down slightly. Continue to press it down until it is fully mated while maintaining the angle. Do not apply excessive force as it may damage the contacts. 17 DF40 Series0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors BPrecautions when unmating a connector 9;)%"9H"%#)K 9;)%"9E"%#)K To unmate this connector, lift evenly across the header, making sure that each side stays parallel to each other. If circumstances prevent the connectors from staying parallel to each other, then one side may be lifted as shown in the diagram. This method is only approved if the connector is mounted onto an extremely rigid circuit board. If the board were to warp during this process it may result in damage to the connector or its solder joints. Pitch direction Corner direction Do not try to disconnect these connectors by pulling on one side or a corner, or unmate it while it is securely mounted onto a rigid FPC. These actions may lead to deformities and ultimately a damaged connector. As shown in the figure to the left, do not unmate it from the width direction (front to back), it may damage contacts. Width direction 18 DF40 Series0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors BPrecautions when unmating a connector The contact may peel away if there is not enough rigidity in FPC. Receptacle FPC When mounting the receptacle side to FPC which does not have enough rigidity, the contact may peel away soldered connection. We recommended to mount the header side to the FPC. Header We have conducted evaluations on the requirements needed for FPC rigidity. If you need to mount the receptacle to the FPC, contact your local Hirose Rep for this data. Header FPC Receptacle Even when mounting the header side to FPC, if the rigidity of FPC is low, the connector may break as shown in the left figure. Please check the strength and durability of FPC before using. For the evaluation results of each item and FPC rigidity, please contact us. 19 DF40 Series0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors USA: HIROSE ELECTRIC (U.S.A.), INC. Headquarters 2688 Westhills Court, Simi Valley, CA 93065-6235 Phone : +1-805-522-7958 Fax : +1-805-522-3217 http://www.hiroseusa.com USA: HIROSE ELECTRIC (U.S.A.), INC. San Jose Office 3255 Scott Boulevard, Building 7, Suite 101 Santa Clara, CA 95054 Phone : +1-408-253-9640 Fax : +1-408-253-9641 http://www.hiroseusa.com USA: HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive) 37677 Professional Center Drive, Suite #100C Livonia, MI 48154 Phone : +1-734-542-9963 Fax : +1-734-542-9964 http://www.hiroseusa.com THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 1101 CC Amsterdam Z-O Phone : +31-20-6557460 Fax : +31-20-6557469 http://www.hiroseeurope.com GERMANY: HIROSE ELECTRIC EUROPE B.V. German Branch Herzog-Carl-Strasse 4 D-73760 Ostfildern (Scharnhauser Park) Phone : +49-711-4560-02-1 Fax : +49-711-4560-02-299 http://www.hirose.de UNITED KINGDOM: HIROSE ELECTRIC EUROPE B.V. UK Branch 22 Vincent Avenue, Crownhill Business Centre, Crownhill, Milton Keynes, MK8 0AB Phone : +44-1908-305750 Fax : +44-1908-305768 http://www.hirose.co.uk CHINA: HIROSE ELECTRIC TRADING (SHANGHAI) CO., LTD. 1601,Henderson Metropolitan,NO.300 ,East Nanjing Road,Huangpu District, Shanghai,China 200001 Phone : +86-21-6391-3355 Fax : +86-21-6391-3335 http://www.hirose-china.com.cn CHINA: HIROSE ELECTRIC TRADING (SHANGHAI) CO., LTD. Beijing Branch A1001, Ocean International Center, Building 56# East 4th Ring Middle Road, Chao Yang District, Beijing, 100025 Phone : +86-10-5165-9332 Fax : +86-10-5908-1381 http://www.hirose-china.com.cn CHINA: HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre 5002, ShenNanDong Road, ShenZhen City, Guangdong Province, 518008 Phone : +86-755-8207-0851 Fax : +86-755-8207-0873 http://www.hirose-china.com.cn HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Room 1001, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +852-2803-5338 Fax : +852-2591-6560 http://www.hirose-hongkong.com.hk TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 103 8F, No.87, Zhengzhou Rd., Taipei Phone : +886-2-2555-7377 Fax : +886-2-2555-7350 http://www.hirose-taiwan.com.tw KOREA: HIROSE KOREA CO., LTD. 1261-10, Jeoungwhang-Dong, Shihung-City, Kyunggi-Do 429-450 Phone : +82-31-496-7000,7124 Fax : +82-31-496-7100 http://www.hirose.co.kr SINGAPORE: INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. Bangalore Liaison office HIROSE ELECTRIC SINGAPORE PTE. LTD. 10 Anson Road #26-1 International Plaza Unit No.03, Ground Floor, Explorer Building International Tech Park Whitefield Road, Bangalore 560066 Karnataka, India 079903 Phone : +65-6324-6113 Phone : +65-6324-6113 Fax : +65-6324-6123 Fax : +65-6324-6123 http://www.hirose-singapore.com.sg http://www.hirose-singapore.com.sg INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD Delhi Liaison Office Suite No. 606 5th Floor SB Tower 1A/1 Sector 16 A Filmcity Noida 201301 Uttar Pradesh-India Phone : +91-120-4804917 Fax : +91-120-4804949 http://www.hirose.com/sg/ MALAYSIA: HIROSE ELECTRIC SINGAPORE PTE. LTD (Representative office) 1-10-07, Suntech @ Penang Cybercity (1164),Lintang Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia. Phone : +604-619-2564 Fax : +604-619-2574 http://www.hirose.com/sg/ (R) 20 6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 11/2013. Contents are subject to change without notice for the purpose of improvements. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Hirose Electric: DF40C-80DP-0.4V(51) DF40C-80DS-0.4V(51) DF40C-60DP-0.4V(51) DF40C-60DS-0.4V(51) DF40C-20DS0.4V(51) DF40C-24DS-0.4V(51) DF40C-30DS-0.4V(51) DF40C-40DS-0.4V(51) DF40C-50DS-0.4V(51) DF40C20DP-0.4V(51) DF40C-24DP-0.4V(51) DF40C-30DP-0.4V(51) DF40C-40DP-0.4V(51) DF40C-50DP-0.4V(51) DF40C-100DP-0.4V(51) DF40C-100DS-0.4V(51) DF40C-10DP-0.4V(51) DF40C-10DS-0.4V(51) DF40B-10DS0.4V(51) DF40B-50DS-0.4V(51) DF40C(2.0)-20DS-0.4V(51) DF40C(2.0)-50DS-0.4V(51) DF40C(2.0)-60DS-0.4V(51) DF40C-44DP-0.4V(51) DF40HC(2.5)-20DS-0.4V(51) DF40HC(2.5)-50DS-0.4V(51) DF40HC(3.0)-30DS-0.4V(51) DF40HC(3.0)-44DS-0.4V(51) DF40HC(3.0)-50DS-0.4V(51) DF40HC(3.0)-60DS-0.4V(51) DF40HC(3.5)-60DS-0.4V(51) DF40C-70DP-0.4V(51) DF40C-70DS-0.4V(51) DF40C(2.0)-80DS-0.4V(51) DF40HC(2.5)-60DS-0.4V(51) DF40HC(3.5)-30DS-0.4V(51) DF40HC(3.5)-50DS-0.4V(51) DF40C-90DP-0.4V(51) DF40C-90DS-0.4V(51) DF40B(2.0)-12DS-0.4V(51) DF40B(2.0)-80DS-0.4V(51) DF40C(2.0)-30DS-0.4V(51) DF40C(2.0)-40DS-0.4V(51) DF40C(2.0)-40DS-0.4V(70) DF40C(2.0)-44DS-0.4V(70) DF40C(2.0)-50DS-0.4V(70) DF40C(2.0)-60DS-0.4V(52) DF40C(2.0)-60DS-0.4V(70) DF40C(2.0)-70DS-0.4V(51) DF40C-12DP-0.4V(51) DF40C-20DS-0.4V(52) DF40C-20DS0.4V(70) DF40C-30DS-0.4V(70) DF40C-40DS-0.4V(52) DF40C-40DS-0.4V(70) DF40C-50DS-0.4V(52) DF40C50DS-0.4V(70) DF40C-60DS-0.4V(52) DF40C-70DS-0.4V(70) DF40C-80DS-0.4V(52) DF40HC(2.5)-30DS-0.4V(70) DF40HC(2.5)-40DS-0.4V(70) DF40HC(3.0)-30DS-0.4V(70) DF40HC(3.0)-44DS-0.4V(70) DF40HC(3.0)-50DS-0.4V(70) DF40HC(3.0)-60DS-0.4V(70) DF40HC(4.0)-40DS-0.4V(70) DF40HC(4.0)-60DS-0.4V(51) DF40HC(4.0)-80DS0.4V(51) DF40JC-10DP-0.4V(53) DF40JC-10DS-0.4V(53) DF40JC-20DS-0.4V(53) DF40JC-24DP-0.4V(53) DF40JC24DS-0.4V(53) DF40JC-30DS-0.4V(53) DF40JC-40DP-0.4V(53) DF40JC-40DS-0.4V(53) DF40JC-44DS-0.4V(53) DF40JC-50DS-0.4V(53) DF40JC-60DP-0.4V(53) DF40JC-60DS-0.4V(53) DF40JC-70DS-0.4V(53) DF40JC-90DS0.4V(53) DF40RC-30DP-0.4V(51) DF40RC-40DP-0.4V(51) DF40SB-20DS-0.4V(51) DF40SB-24DS-0.4V(51) DF40SB-40DS-0.4V(51) DF40HC(3.0)-90DS-0.4V(51) DF40HC(3.5)-80DS-0.4V(51) DF40HC(4.0)-90DS-0.4V(51) DF40C-80DP-0.4V(58) DF40C-20DS-0.4V(58) DF40C-24DS-0.4V(58) DF40C-40DS-0.4V(58) DF40C-50DS-0.4V(58) DF40C-24DP-0.4V(58) DF40C-40DP-0.4V(58) DF40C-50DP-0.4V(58) DF40C-70DP-0.4V(58)