1
0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors
DF40 Series
2013.11 ④
■Features
1. High density mounting
Space saving design that has a minimum
connector width, yet still retains a sufficient
vacuum area for easy pick-and-place mounting
Minimum width: 3.38 mm
2. Multiple stack height options
In addition to its space saving design, several
stack heights are available and add versatility to
any application. Stack heights: 1.5 mm, 2.0 mm,
2.5 mm, 3.0 mm, 3.5 mm, and 4.0 mm.
3. High contact reliability
Despite its small stature and low profile, the contacts
deliver strong contact forces and an effective mating
length of 0.45 mm on the 1.5 mm stacking height.
This connector utilizes a locking system that prevents
accidental unmating issues and emits a clear tactile
click to ensure that mating has been completed.
4. Excellent self-aligning range
The use of guide ribs allows 0.33 mm of self-
alignment on this connector.
5.
Reinforced structure with shock absorbing ribs
Both sides of the connector have been reinforced
with the addition of shock absorbing ribs.
6. Solder wicking prevention
Nickel-plated barriers were added to protect the
contact areas from potential solder wicking.
7. Contamination resistant design
When mated, the connector’s design covers the
contacts which help to keep dust and other debris away
from the contacts. The SMT leads are kept very close
to the connector housing which also helps to prevent
shorts caused by debris on the exposed contacts
8. RoHS compliant
Environment friendly and does not use RoHS
specified prohibited materials.
All materials and substances used to produce
these parts comply with the RoHS standards.
9.
High speed signal with noise prevention
The shielded type can support high speed signal
transmissions with noise prevention.
:m^hi^c\
egdYjXih
9;)%
(#(-bb
*#%bb
Space saving
&-#+bb
-%edh#!%#)bbe^iX]!&#*bb]Z^\]i
&#*〜)#%bb
%#)*bb
AdX`hnhiZb
&%edh#id*%edh#
H]dX`VWhdgei^dcg^Wh
Space saving
High contact reliability - effective mating length 0.45 mm
Stacking height variations
Standard type
Stacking
height
1.5
mm
2.0
mm
2.5
mm
3.0
mm
3.5
mm
4.0
mm
No. of Contact
10 ○−○−−−
12 △○ −−−−
20 ○○○ −○−
24 ○○ −−−−
30 ○○○○○ −
34 ○−−−−−
40 ○○○ −○○
44 − ○−○−−
50 ○○○○○○
60 ○○○○○○
70 ○○ −○−−
80 ○○ −○○○
90 ○−−
○−○
100 ○−−
○−−
Δ : Products under development
Shielded type
Stacking
height
1.5
mm
3.0
mm
No. of
Contacts
30 ○−
48 ○○
70 − ○
2
DF40 Series●0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors
■Product Specifi cations
Ratings Rated Current 0.3A
Rated Voltage AC,DC 30V
Operating Temperature Range
-35 〜85℃ (Note 1)
Operating Humidity Range
20 〜80%
Storage Temperature Range
-10 〜60℃ (Note 2)
Storage Humidity Range
40 〜70% (Note 2)
Items Specifi cations Conditions
1. Insulation Resistance Minimum of 50 Mø Measured with DC 100 V
2. Withstanding Voltage No fl ashover or breakdown Apply AC 100 V for 1 minute
3. Contact Resistance Maximum of 90 mø Measured with AC 20 mV, 1 kHz and 1 mA
4. Vibration Resistance No electrical discontinuity of 1μs or greater Frequency 10-55 Hz, half amplitude 0.75 mm, 3
directions for 2 hours
5. Humidity Resistance Contact resistance Maximum of 90 mø
Insulation resistance Minimum of 25 mø
Left at temperature 40 ± 2ç, humidity 90 to 95%,
96 hours
6. Temperature Cycles Contact resistance Maximum of 90 mø
Insulation resistance Minimum of 50 mø
(-55ç: 30 minutes → 5~35ç: 10 minutes → 85ç: 30
minutes →5~35ç: 10 minutes) 5 cycles
7. Durability Contact Resistance: Maximum of 90 mø 30 mating cycles
8. Soldering Heat
Resistance
Should be no melting of resin parts that affects
its performance
Refl ow: according to the Recommended
Temperature Profi le
Hand solder: Soldering iron temperature 350ç, no
more than 3 seconds.
Note 1: Includes temperature rise caused by current fl ow.
Note 2: The term "storage" here refers to products stored for a long period prior to board mounting and use. The operating
temperature and humidity range covers the non-energized condition of connectors after board mounting and the
temporary storage conditions during transportation, etc.
■Materials (Standard, non shielded type)
Product Component Materials Finish UL Regulation
Receptacle Insulator LCP Black UL94V-0
Contact Phosphor bronze Gold plating ---------------
Header Insulator LCP Black UL94V-0
Contact Phosphor bronze Gold plating ---------------
■Materials (Shielded type)
Product Component Materials Finish UL Regulation
Receptacle
Insulator LCP Black UL94V-0
Contact Phosphor bronze Gold plating ---------------
Shield plate Phosphor bronze Gold plating ---------------
Header
Insulator LCP Black UL94V-0
Contact Phosphor bronze Gold plating ---------------
Reinforcing metal fi tting Phosphor bronze Gold plating ---------------
3
DF40 Series●0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors
■Product Number Structure (Standard, non-shielded type)
Refer to this page when determining product specifications by model types. Please place orders with part numbers listed in
this catalog. The characteristics and specifications of the product described in this catalog are reference values. Please
make sure to check the latest delivery specifications at the time of product use.
■Product Number Structure ( Shielded type)
Refer to this page when determining product specifications by model types. Please place orders with part numbers listed in
this catalog. The characteristics and specifications of the product described in this catalog are reference values. Please
make sure to check the latest delivery specifications at the time of product use.
●Receptacle
●Receptacle
●Header
●Header
❶ Series Name: DF40
❷ Style
C: Without reinforcing metal fi tting
HC: Without reinforcing metal fi tting
(The H denotes a stacking
height 2.5 mm or above)
❶ Series Name: DF40
❷ Style
GB: With shield
❶ Series Name: DF40
❷ Style
C: Without reinforcing metal fi tting
❶ Series Name: DF40
❷ Style
GB: With reinforcing metal fi tting
(For use with shielded product )
❸ Stacking height
❸ Stacking height
❹ No. of Contacts
❸ No. of Contacts
❹ Connector Type
DP: Double row pin header
❸ No. of Contacts
❹ Connector Type
DP: Double row pin header
❹ No. of Contacts
❺ Connector Type
DS: Double row receptacle
❻ Contact Pitch:0.4mm
❼
Mating direction Shape V: Vertical SMT
❽ Packaging Type
(51) Embossed tape packaging
❺ Connector Type
DS: Double row receptacle
❻ Contact Pitch: 0.4 mm
❼ Mating direction V: Vertical SMT
❽ Packaging Type
(51) Embossed tape packaging
❺ Contact Pitch: 0.4 mm
❻ Mating direction V: Vertical SMT
❼ Packaging Type
(51) Embossed tape packaging
❺ Contact Pitch: 0.4 mm
❻ Mating direction V: Vertical SMT
❼ Packaging Type
(51) Embossed tape packaging
Display Stacking height
None 1.5mm
2.0 2.0mm
2.5 2.5mm
3.0 3.0mm
3.5 3.5mm
4.0 4.0mm
Display Stackingheight
1.5 1.5mm
3.0 3.0mm
DF40 # − (**)−*DS − 0.4 V (**)
❶❷ ❸ ❹❺ ❻❼❽
DF40 GB − (**)−*DS − 0.4 V (**)
❶❷ ❸ ❹❺ ❻❼❽
DF40 # − *DP − 0.4 V (**)
❶❷ ❸❹ ❺❻❼
DF40 GB − *DP − 0.4 V (**)
❶❷ ❸❹ ❺❻❼
4
DF40 Series●0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors
Part No. HRS No. No. of Contacts A B C D RoHS
DF40C-10DS-0.4V(51) CL684-4036-2-51 10 4.6 1.6 1.0 1.45
○
DF40C-12DS-0.4V(51) Under development 12 5.0 2.0 1.0 1.45
DF40C-20DS-0.4V(51) CL684-4005-9-51 20 6.6 3.6 1.0 1.45
DF40C-24DS-0.4V(51) CL684-4006-1-51 24 7.4 4.4 1.2 1.45
DF40C-30DS-0.4V(51) CL684-4007-4-51 30 8.6 5.6 1.5 1.45
DF40C-34DS-0.4V(51) CL684-4023-0-51 34 9.4 6.4 2.3 1.45
DF40C-40DS-0.4V(51) CL684-4008-7-51 40 10.6 7.6 3.2 1.45
DF40C-50DS-0.4V(51) CL684-4009-0-51 50 12.6 9.6 3.2 1.45
DF40C-60DS-0.4V(51) CL684-4004-6-51 60 14.6 11.6 3.2 1.45
DF40C-70DS-0.4V(51) CL684-4016-5-51 70 16.6 13.6 3.2 1.45
DF40C-80DS-0.4V(51) CL684-4002-0-51 80 18.6 15.6 3.2 1.45
DF40C-90DS-0.4V(51) CL684-4124-8-51 90 20.6 17.6 3.2 1.45
DF40C-100DS-0.4V(51) CL684-4033-4-51 100 22.6 19.6 3.2 1.45
(Note 1) Please place orders by full reel quantities.
(Note 2) The surface of the 60-100 pos. parts have a small, concave section that will not affect the vacuum pick up operation.
(Note 3) PCB layout prohibited area.
(Note 4) This connector is NOT polarized
(Note 5) Some parts are available with metal fi ttings. Please contact a Hirose sales representative for more information.
Unit: mm
7¤%#%'
E2%#)¤%#%'
%#'¤%#%'
(#,- %#%*
%
'#(- %
"%#%*
&#*B6M
2.88±0.2
3.38±0.2
Vacuum pick up area : C±0.2
B±0.08
P=0.4±0.05
A±0.2
0.12±0.02
D±0.15
■Receptacle (Stacking height 1.5 mm)
BRecommended PCB layout
【Specification No.】
(51): Embossed package 5,000 pieces per reel
■Stacking height 1.5 mm
5
DF40 Series●0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors
Unit: mm
7¤%#%'
E2%#)¤%#%'
%#'¤%#%'
(#,- %#%*
%
'#(- %
"%#%*
&#*B6M
2.94±0.2
3.38±0.2
Vacuum pick up area : C±0.2
B±0.08
P=0.4±0.05
A±0.2
0.12±0.02
D±0.15
■Receptacle (Stacking height 2.0 mm)
BRecommended PCB layout
■Stacking height 2.0 mm 【Specification No.】
(51): Embossed package 4,000 pieces per reel
Part No. HRS No. No. of Contacts A B C D RoHS
DF40C(2.0)-12DS-0.4V(51) CL684-4148-6-51 12 5.0 2.0 1.0 1.95
○
DF40C(2.0)-20DS-0.4V(51) CL684-4040-0-51 20 6.6 3.6 1.0 1.95
DF40C(2.0)-24DS-0.4V(51) CL684-4021-2-51 24 7.4 4.4 1.2 1.95
DF40C(2.0)-30DS-0.4V(51) CL684-4058-5-51 30 8.6 5.6 1.5 1.95
DF40C(2.0)-40DS-0.4V(51) CL684-4042-5-51 40 10.6 7.6 3.2 1.95
DF40C(2.0)-50DS-0.4V(51) CL684-4091-0-51 50 12.6 9.6 3.2 1.95
DF40C(2.0)-60DS-0.4V(51) CL684-4034-7-51 60 14.6 11.6 3.2 1.95
DF40C(2.0)-70DS-0.4V(51) CL684-4147-3-51 70 16.6 13.6 3.2 1.95
DF40C(2.0)-80DS-0.4V(51) CL684-4132-6-51 80 18.6 15.6 3.2 1.95
(Note 1) Please place orders by full reel
(Note 2) The surface of the 60-100 pos. parts have a small, concave section that will not affect the vacuum pick up operation.
(Note 3) PCB layout prohibited area.
(Note 4)This connector is NOT polarized
(Note 5) Some parts are available with metal fi ttings. Please contact a Hirose sales representative for more information.
6
DF40 Series●0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors
Unit: mm
7¤%#%'
E2%#)¤%#%'
%#'¤%#%'
(#,- %#%*
%
'#(- %
"%#%*
%#.'B6M
2.94±0.2
3.38±0.2
Vacuum pick up area : C±0.2
B±0.08
P=0.4±0.05
A±0.2
0.12±0.02
D±0.15
■Receptacle (Stacking height 2.5 mm to 4.0 mm)
BRecommended PCB layout
■Stacking height 3.0 mm 【Specification No.】
(51): Embossed package 3,000 pieces per reel
Unit: mm
■Stacking height 2.5 mm 【Specification No.】
(51): Embossed package 3,000 pieces per reel
Part No. HRS No. No. of Contacts A B C D RoHS
DF40HC(2.5)-10DS-0.4V(51) Under development 10 4.6 1.6 1.0 2.4
○
DF40HC(2.5)-20DS-0.4V(51) CL684-4126-3-51 20 6.6 3.6 1.0 2.4
DF40HC(2.5)-40DS-0.4V(51) CL684-4112-9-51 40 10.6 7.6 3.2 2.4
DF40HC(2.5)-50DS-0.4V(51) CL684-4101-2-51 50 12.6 9.6 3.2 2.4
DF40HC(2.5)-60DS-0.4V(51) CL684-4085-8-51 60 14.6 11.6 3.2 2.4
Part No. HRS No. No. of Contacts A B C D RoHS
DF40HC(3.0)-30DS-0.4V(51)
CL684-4098-0-51 30 8.6 5.6 1.5 2.9
○
DF40HC(3.0)-44DS-0.4V(51)
CL684-4076-7-51 44 11.4 8.4 3.2 2.9
DF40HC(3.0)-50DS-0.4V(51)
CL684-4099-2-51 50 12.6 9.6 3.2 2.9
DF40HC(3.0)-60DS-0.4V(51)
CL684-4100-0-51 60 14.6 11.6 3.2 2.9
DF40HC(3.0)-70DS-0.4V(51)
CL684-4138-2-51 70 16.6 13.6 3.2 2.9
DF40HC(3.0)-80DS-0.4V(51)
CL684-4180-9-51 80 18.6 15.6 3.2 2.9
DF40HC(3.0)-90DS-0.4V(51)
CL684-4161-4-51 90 20.6 17.6 3.2 2.9
DF40HC(3.0)-100DS-0.4V(51)
CL684-4151-0-51 100 22.6 19.6 3.2 2.9
(Note 1) Please place orders by full reel
(Note 2) The surface of the 60-100 pos. parts have a small, concave section that will not affect the vacuum pick up operation
(Note 3) PCB layout prohibited area.
(Note 4) This connector is NOT polarized.
(Note 5) Some parts are available with metal fi ttings. Please contact a Hirose sales representative for more information.
7
DF40 Series●0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors
Unit: mm
■Stacking height 4.0 mm 【SpecificationNo.】
(51):Embossedpackage2,000piecesperreel
Unit: mm
■Stacking height 3.5 mm 【Specification No.】
(51): Embossed package 2,000 pieces per reel
Part No. HRS No. No. of Contacts A B C D RoHS
DF40HC(3.5)-20DS-0.4V(51) CL684-4188-0-51 20 6.6 3.6 1.0 3.4
○
DF40HC(3.5)-30DS-0.4V(51) CL684-4136-7-51 30 8.6 5.6 1.5 3.4
DF40HC(3.5)-40DS-0.4V(51) CL684-4209-9-51 40 10.6 7.6 3.2 3.4
DF40HC(3.5)-50DS-0.4V(51) CL684-4109-4-51 50 12.6 9.6 3.2 3.4
DF40HC(3.5)-60DS-0.4V(51) CL684-4102-5-51 60 14.6 11.6 3.2 3.4
DF40HC(3.5)-80DS-0.4V(51) CL684-4162-7-51 80 18.6 15.6 3.2 3.4
Part No. HRS No. No. of Contacts A B C D RoHS
DF40HC(4.0)-40DS-0.4V(51) Under development 40 10.6 7.6 3.2 3.9
○
DF40HC(4.0)-50DS-0.4V(51) Under development 50 12.6 9.6 3.2 3.9
DF40HC(4.0)-60DS-0.4V(51) CL684-4133-9-51 60 14.6 11.6 3.2 3.9
DF40HC(4.0)-80DS-0.4V(51) CL684-4140-4-51 80 18.6 15.6 3.2 3.9
DF40HC(4.0)-90DS-0.4V(51) CL684-4165-5-51 90 20.6 17.6 3.2 3.9
(Note 1) Please place orders by full reel
(Note 2) The surface of the 60-100 pos. parts have a small, concave section that will not affect the vacuum pick up operation
(Note 3) PCB layout prohibited area.
(Note 4) This connector is NOT polarized.
(Note 5) Some parts are available with metal fi ttings. Please contact a Hirose sales representative for more information.
8
DF40 Series●0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors
3.78
＋
0.05
0
2.38
0
−
0.05
1.5MAX
6.48
±
0.02
5.6
±
0.02
P=0.4±0.02
0.2±0.02
4.08
＋
0.05
0
2.64
0
−
0.05
0.28±0.02
3.2
±
0.02
3.78
＋
0.05
0
2.38
0
−
0.05
1.5MAX
10.08
±
0.02
9.2
±
0.02
P=0.4±0.02
0.2±0.02
4.08
＋
0.05
0
4.08
＋
0.05
0
2.64
0
−
0.05
0.6±0.02 0.28±0.02
0.6±0.02 0.6±0.02
1.45
±
0.15
3.12
±
0.2
Vacuum pick up area: 1.5±0.2
8.64
±
0.3
6.48
±
0.1
3.38
±
0.3
0.2±0.02
0.12±0.02
5.6
±
0.08
P=0.4±0.05
P=0.4±0.05
9.2
±
0.08
0.12±0.02
0.12±0.02
0.2±0.02
3.38
±
0.3
3.2
±
0.08
10.08
±
0.1
12.24
±
0.3
Vacuum pick up area: 3.2±0.2
3.12
±
0.2
1.45
±
0.15
■Receptacle (Stacking height 1.5 mm, with shield)
BRecommended PCB layout
Unit: mm
■Stacking height 1.5mm 【Specification No.】
(51): Embossed package 5,000 pieces per reel
Part No. HRS No. No. of Contacts Signal contact Ground contact RoHS
DF40GB(1.5)-30DS-0.4V(51) CL684-4198-4-51 30 30 4 ○
DF40GB(1.5)-48DS-0.4V(51) CL684-4194-3-51 48 40 12
(Note 1) Please place orders by full reel
(Note 2) PCB layout prohibited area.
(Note 3) This connector is NOT polarized
< 30 contact >
< 48 contact >
< 30 contact > < 48 contact >
9
DF40 Series●0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors
3.2
±
0.02
3.78
＋
0.05
0
2.38
0
−
0.05
1.5MAX
10.08
±
0.02
9.2
±
0.02
P=0.4±0.02
0.2±0.02
4.08
＋
0.05
0
4.08
＋
0.05
0
2.64
0
−
0.05
0.6±0.02 0.28±0.02
0.6±0.02 0.6±0.02
0.28±0.020.6±0.02
2.64 0
−0.05
4.08＋0.05
0
4.08＋0.05
0
0.2±0.02
P=0.4±0.02
13.6
±
0.02
14.48
±
0.02
2.38 0
−0.05
3.78＋0.05
0
9.2
±
0.02
0.6±0.020.6±0.02
3.6
±
0.02
2.9
±
0.15
Vacuum pick up area: 3.2±0.2
12.24
±
0.3
10.08
±
0.1
3.2
±
0.08
3.38
±
0.3
0.2±0.02
0.12±0.02
0.12±0.02
P=0.4±0.05
9.2
±
0.08
3.12
±
0.2
3.68
±
0.2
3.38
±
0.2
16.64
±
0.3
P=0.4±0.05
13.6
±
0.08
Vacuum pick up area: 3.2±0.2
3.38
±
0.3
3.6
±
0.08
9.2
±
0.08
0.12±0.050.2±0.02
0.12±0.02
2.9
±
0.15
3.12
±
0.2
■Receptacle (Stacking height 3.0 mm, with shield)
BRecommended PCB layout
Unit: mm
■Stacking height 3.0mm 【Specification No.】
(51): Embossed package 3,000 pieces per reel
Part No. HRS No. No. of Contacts Signal contact Ground contact RoHS
DF40GB(3.0)-48DS-0.4V(51) CL684-4197-1-51 48 40 12 ○
DF40GB(3.0)-70DS-0.4V(51) CL684-4196-9-51 70 54 20
(Note 1) Please place orders by full reel
(Note 2) The surface of the 70 pos. part have a small, concave section that will not affect the vacuum pick up operation
(Note 3) This connector is NOT polarized.
< 48 contact >
< 70 contact >
< 48 contact > < 70 contact >
10
DF40 Series●0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors
7¤%#%'
E2%#)¤%#%' %#(¤%#%'
%#+*¤%#%'
(#(, %#%*
%
'#%* %
"%#%*
%#'(¤%#%' %#(*¤%#%'
B±0.08
Vacuum pick up area : C±0.2
1.85±0.2
P=0.4±0.05
A±0.2
2.97±0.2
0.15±0.02
1.14±0.15
■Header
BRecommended PCB layout
Unit: mm
Part No. HRS No. No. of Contacts A B C RoHS
DF40C-10DP-0.4V(51) CL684-4035-0-51 10 3.52 1.6 1.0
○
DF40C-12DP-0.4V(51) CL684-4149-9-51 12 3.92 2.0 1.0
DF40C-20DP-0.4V(51) CL684-4010-9-51 20 5.52 3.6 1.0
DF40C-24DP-0.4V(51) CL684-4011-1-51 24 6.32 4.4 1.2
DF40C-30DP-0.4V(51) CL684-4012-4-51 30 7.52 5.6 1.5
DF40C-34DP-0.4V(51) CL684-4024-3-51 34 8.32 6.4 2.3
DF40C-40DP-0.4V(51) CL684-4013-7-51 40 9.52 7.6 3.2
DF40C-44DP-0.4V(51) CL684-4077-0-51 44 10.32 8.4 3.2
DF40C-50DP-0.4V(51) CL684-4014-0-51 50 11.52 9.6 3.2
DF40C-60DP-0.4V(51) CL684-4003-3-51 60 13.52 11.6 3.2
DF40C-70DP-0.4V(51) CL684-4015-2-51 70 15.52 13.6 3.2
DF40C-80DP-0.4V(51) CL684-4001-8-51 80 17.52 15.6 3.2
DF40C-90DP-0.4V(51) CL684-4125-0-51 90 19.52 17.6 3.2
DF40C-100DP-0.4V(51) CL684-4032-1-51 100 21.52 19.6 3.2
(Note 1) Please place orders by full reel
(Note 2) There are no concave parts on the header side contact part to increase the mating strength for 60 pos. or above.
(Note 3) Use the contacts at the four corners as metal fi ttings. Do not use them as signal or power contacts.
(Note 4)
The surface of the 90 pos and higher parts have a small, concave section that will not affect the vacuum pick up operation
(Note 5) This connector is NOT polarized.
11
DF40 Series●0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors
F
0
−
0.05
E
0
−
0.05
D
＋
0.05
0
3.32
＋
0.05
0
1.88
0
−
0.05
2.05
0
−
0.05
1.02
0
−
0.05
2.42
＋
0.05
0
3.37
＋
0.05
0
P=0.4
±
0.02 0.35
±
0.02
0.23
±
0.02
B
±
0.02
C
±
0.02
1.14
±
0.15
0.08±0.02
Vacuum pick up area:
G±0.2
2.97
±
0.2
2.02
±
0.2
0.15±0.02
D
±
0.1
P=0.4±0.05
E
±
0.08
1.85±0.2
A
±
0.3
1.52±0.2
■Header (For use with shielded product)
BRecommended PCB layout
Unit: mm
Part No. HRS No. No. of Contacts A B C D E F G RoHS
DF40GB-30DP-0.4V(51) CL684-4200-4-51 10 7.16 6.67 5.6 8.74 7.32 6.12 1.5
○
DF40GB-48DP-0.4V(51) CL684-4195-6-51 12 10.76 10.27 9.2 12.34 10.92 9.72 3.2
DF40GB-70DP-0.4V(51) CL684-4199-7-51 20 15.16 14.67 13.6 16.74 15.32 14.12 3.2
(Note 1) Please place orders by full reel
(Note 2) There are no concave parts of header side contact part to increase the mating strength for 60 pos. or above.
(Note 3) This connector is NOT polarized.
12
DF40 Series●0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors
Unit: mm
A
A
Unreeling Direction
GG
8±0.1 H
Ø1.5
2±0.1
4±0.1
F
1.75±0.1
C±0.1
B±0.1
A±0.3
F-F
0.3±0.1
1.65±0.15
R0.75
R0.75
H
0.2±0.05
F
G-G
+0.1
0
+0.1
0
+0.1
0
Ø13±0.2
Ø80±1
Ø380±2
E±0.5
D±1
Ø1.5 holes for
feed mechanism
2±0.5
Ø21±0.8
Product label
120°
120°
BEmbossed Carrier Tape Dimensions (JIS C 0806 compliant)
●Receptacle (Stacking height 1.5 mm) ●Reel Condition Dimensions
■Stacking height 1.5 mm
Part No. A B C D E
DF40C-10DS-0.4V(51) 16 −7.5 21.5 17.5
DF40C-12DS-0.4V(51) 16 −7.5 21.5 17.5
DF40C-20DS-0.4V(51) 16 −7.5 21.5 17.5
DF40C-24DS-0.4V(51) 16 −7.5 21.5 17.5
DF40C-30DS-0.4V(51) 24 −11.5 29.5 25.5
DF40C-34DS-0.4V(51) 24 −11.5 29.5 25.5
DF40C-40DS-0.4V(51) 24 −11.5 29.5 25.5
DF40C-50DS-0.4V(51) 24 −11.5 29.5 25.5
DF40C-60DS-0.4V(51) 24 −11.5 29.5 25.5
DF40C-70DS-0.4V(51) 32 28.4 14.2 37.5 33.5
DF40C-80DS-0.4V(51) 32 28.4 14.2 37.5 33.5
DF40C-90DS-0.4V(51) 44 40.4 20.2 49.5 45.5
DF40C-100DS-0.4V(51) 44 40.4 20.2 49.5 45.5
DF40GB(1.5)-30DS-0.4V(51) 24 −11.5 29.5 25.5
DF40GB(1.5)-48DS-0.4V(51) 24 −11.5 29.5 25.5
(Note 1) For 10-60 contact position parts, the carrier tape only has one row of holes. The carrier for parts
with 70 contacts and above has two rows of holes.
13
DF40 Series●0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors
Unit: mm
J
GG
H
Unreeling Direction
0.2±0.05
R0.75
F±0.15
J
8±0.1
Ø1.5
2±0.1
4±0.1
H
1.75±0.1
H-H
G-G
+0.1
0
R0.75 +0.1
0
0.3±0.1
A±0.3
B±0.1
C±0.1
+0.1
0
Ø13±0.2
Ø80±1
Ø380±2
E±0.5
D±1
Ø1.5 holes for
feed mechanism
2±0.5
Ø21±0.8
Product label
120°
120°
BEmbossed Carrier Tape Dimensions (JIS C 0806 compliant)
●
Receptacle (Stacking height 2.0 mm to 2.5 mm)
●Reel Dimensions
■Stacking height 2.0 mm
Part No. A B C D E F
DF40C(2.0)-12DS-0.4V(51) 16 −7.5 21.5 17.5 2.2
DF40C(2.0)-20DS-0.4V(51) 16 −7.5 21.5 17.5 2.2
DF40C(2.0)-24DS-0.4V(51) 16 −7.5 21.5 17.5 2.2
DF40C(2.0)-30DS-0.4V(51) 24 −11.5 29.5 25.5 2.2
DF40C(2.0)-40DS-0.4V(51) 24 −11.5 29.5 25.5 2.2
DF40C(2.0)-50DS-0.4V(51) 24 −11.5 29.5 25.5 2.2
DF40C(2.0)-60DS-0.4V(51) 24 −11.5 29.5 25.5 2.2
DF40C(2.0)-70DS-0.4V(51) 32 28.4 14.2 37.5 33.5 2.2
DF40C(2.0)-80DS-0.4V(51) 32 28.4 14.2 37.5 33.5 2.2
Unit: mm
■Stacking height 2.5 mm
Part No. A B C D E F
DF40HC(2.5)-10DS-0.4V(51) 16 −7.5 21.5 17.5 2.72
DF40HC(2.5)-20DS-0.4V(51) 16 −7.5 21.5 17.5 2.72
DF40HC(2.5)-40DS-0.4V(51) 24 −11.5 29.5 25.5 2.72
DF40HC(2.5)-50DS-0.4V(51) 24 −11.5 29.5 25.5 2.72
DF40HC(2.5)-60DS-0.4V(51) 24 −11.5 29.5 25.5 2.72
(Note 1) For 10-60 contact position parts, the carrier tape only has one row of holes. The carrier for parts with 70 contacts
and above has two rows of holes.
14
DF40 Series●0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors
Unit: mm
J
GG
Ø1.5
+0.1
0
2±0.1
JH
Unreeling Direction
G-G
8±0.1 0.4±0.1
4±0.1
1.75±0.1
C±0.1
B±0.1
A±0.3
HH-H
F±0.15
0.2±0.05
R0.75+0.1
0
R0.75
+0.1
0
Ø13±0.2
Ø80±1
Ø380±2
E±0.5
D±1
Ø1.5 holes for
feed mechanism
2±0.5
Ø21±0.8
Product label
120°
120°
BEmbossed Carrier Tape Dimensions (JIS C 0806 compliant)
●
Receptacle (Stacking height 3.0 mm to 4.0 mm)
●Reel Condition Dimensions
■Stacking height 3.5 mm
Unit: mm
■Stacking height 4.0 mm
Part No. A B CDEF
DF40HC(3.5)-20DS-0.4V(51)
16 −7.5 21.5 17.5 3.72
DF40HC(3.5)-30DS-0.4V(51)
24 −11.5 29.5 25.5 3.72
DF40HC(3.5)-50DS-0.4V(51)
24 −11.5 29.5 25.5 3.72
DF40HC(3.5)-60DS-0.4V(51)
24 −11.5 29.5 25.5 3.72
Part No. A B CDEF
DF40HC(4.0)-40DS-0.4V(51)
24 −11.5 29.5 25.5 4.15
DF40HC(4.0)-50DS-0.4V(51)
24 −11.5 29.5 25.5 4.15
DF40HC(4.0)-60DS-0.4V(51)
24 −11.5 29.5 25.5 4.15
DF40HC(4.0)-80DS-0.4V(51)
32 28.4 14.2 37.5 33.5 4.15
DF40HC(4.0)-90DS-0.4V(51)
44 40.4 20.2 49.5 45.5 4.15
(Note 1) For 10-60 contact position parts, the carrier tape only has one row of holes. The carrier for parts with 70
contacts and above has two rows of holes.
Unit: mm
■Stacking height 3.0 mm
Part No. A B CDEF
DF40HC(3.0)-30DS-0.4V(51)
24 −11.5 29.5 25.5 3.15
DF40HC(3.0)-44DS-0.4V(51)
24 −11.5 29.5 25.5 3.15
DF40HC(3.0)-50DS-0.4V(51)
24 −11.5 29.5 25.5 3.15
DF40HC(3.0)-60DS-0.4V(51)
24 −11.5 29.5 25.5 3.15
DF40HC(3.0)-70DS-0.4V(51)
32 28.4 14.2 37.5 33.5 3.15
DF40HC(3.0)-80DS-0.4V(51)
32 28.4 14.2 37.5 33.5 3.15
DF40HC(3.0)-90DS-0.4V(51)
44 40.4 20.2 49.5 45.5 3.15
DF40HC(3.0)-100DS-0.4V(51)
44 40.4 20.2 49.5 45.5 3.15
DF40GB(3.0)-48DS-0.4V(51)
24 −11.5 29.5 25.5 3.15
DF40GB(3.0)-70DS-0.4V(51)
32 28.4 14.2 37.5 33.5 3.15
15
DF40 Series●0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors
A
A
Ø1.5
2±0.1
4±0.1
FF-F
G
H
H
F
Unreeling Direction
G-G
0.3±0.1
G
1.75±0.1
C±0.1
B±0.1
A±0.3
0.2±0.05
1.34±0.15
+0.1
0
Ø0.75
+0.1
0
Ø0.75
+0.1
0
Ø13±0.2
Ø80±1
Ø380±2
E±0.5
D±1
Ø1.5 holes for
feed mechanism
2±0.5
Ø21±0.8
Product label
120°
120°
●Header ●Reel Dimensions
Unit: mm
Part No. A B C D E
DF40C-10DP-0.4V(51) 12 −5.5 17.5 13.5
DF40C-12DP-0.4V(51) 12 −5.5 17.5 13.5
DF40C-20DP-0.4V(51) 16 −7.5 21.5 17.5
DF40C-24DP-0.4V(51) 16 −7.5 21.5 17.5
DF40C-30DP-0.4V(51) 16 −7.5 21.5 17.5
DF40C-34DP-0.4V(51) 24 −11.5 29.5 25.5
DF40C-40DP-0.4V(51) 24 −11.5 29.5 25.5
DF40C-44DP-0.4V(51) 24 −11.5 29.5 25.5
DF40C-50DP-0.4V(51) 24 −11.5 29.5 25.5
DF40C-60DP-0.4V(51) 24 −11.5 29.5 25.5
DF40C-70DP-0.4V(51) 32 28.4 14.2 37.5 33.5
DF40C-80DP-0.4V(51) 32 28.4 14.2 37.5 33.5
DF40C-90DP-0.4V(51) 44 40.4 20.2 49.5 45.5
DF40C-100DP-0.4V(51) 44 40.4 20.2 49.5 45.5
DF40GB-30DP-0.4V(51) 16 −7.5 21.5 17.5
DF40GB-48DP-0.4V(51) 24 −11.5 29.5 25.5
DF40GB-70DP-0.4V(51) 24 −11.5 29.5 25.5
(Note 1) For 10-60 contact position parts, the carrier tape only has one row of holes. The carrier for parts
with 70 contacts and above has two rows of holes.
16
DF40 Series●0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors
(Note 1) The temperature shows PCB surface temperature near the connector lead part.
50
60 seconds
or below
100
150
200
250
Heating time (sec.)
Temperature (ç)
0100 150 200 25050
Normal
temperature
300
90 to 120 seconds
180ç
250ç
220ç
150ç
【Conditions】
1. Peak temperature Maximum of 250ç
2. Heating part Minimum of 220ç within 60 seconds
3. Preheating part 150〜180ç 90〜120 seconds
4. Number of times Maximum of 2 cycles
BOperating Precautions
1. Recommended Solder Profi le
2. Recommended hand solder
conditions Soldering iron temperature 340 ±10ç, solder time no more than 3 seconds
3. Recommended screen thickness:
Opening ratio (pattern area ratio)
Thickness: 0.12 mm
Opening ratio: DS side 80% DP side 80%
4. Leaning of PCB Max 0.02 mm at the center of connector (using both edges of connector as criteria)
5. Washing Cleaning/washing is not recommended for this connector. Cleaning agents can
deteriorate the mechanical operation and the environmental resistance of this
connector.
6. Precautions ■ Do not mate or unmate these connectors until they are mounted, failure to follow
this precaution can lead to deformation or damage to these connectors.
■ Provide another form of support to the PCB, this connector was not designed to
be the main form of support.
■ Mating and unmating with excessive force can cause damage.
■ Do not apply excessive amounts of fl ux as it may cause excess solder and fl ux
wicking
■ There may be a slight variance in the color of the molding between production
lots, this variance will not affect the performance of the connector.
■ Refer to the next page for the handling precautions when mating and unmating
the connectors.
■ If the connector becomes disconnected due to impact, a fall or a counterforce to
the FPC, it may be necessary to hold the connector in place with an addition to
the device’s case or other cushioning material to hold the connector in place.
17
DF40 Series●0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors
DF40*-*DS-0.4V
DF40*-*DS-0.4V
BPrecautions when connector mating
Prior to mating, locate the guidance ribs and
align the header.
Do not apply excess force to the connector
during mating. Doing so can lead to contact
damage
Make sure that the connector is parallel to
the other side, it then will drop down slightly.
Continue to press it down until it is fully mated
while maintaining the angle. Do not apply
excessive force as it may damage the contacts.
18
DF40 Series●0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors
9;)%"9H"%#)K
9;)%"9E"%#)K
Pitch direction
Width direction
Corner direction
BPrecautions when unmating a connector
To unmate this connector, lift evenly across
the header, making sure that each side stays
parallel to each other.
If circumstances prevent the connectors from
staying parallel to each other, then one side
may be lifted as shown in the diagram. This
method is only approved if the connector is
mounted onto an extremely rigid circuit board.
If the board were to warp during this process
it may result in damage to the connector or its
solder joints.
Do not try to disconnect these connectors by
pulling on one side or a corner, or unmate it
while it is securely mounted onto a rigid FPC.
These actions may lead to deformities and
ultimately a damaged connector.
As shown in the fi gure to the left, do not unmate
it from the width direction (front to back), it may
damage contacts.
19
DF40 Series●0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors
Header
The contact may peel away if there is
not enough rigidity in FPC.
Receptacle
FPC
Header
Receptacle
FPC
BPrecautions when unmating a connector
When mounting the receptacle side to FPC
which does not have enough rigidity, the contact
may peel away soldered connection.
We recommended to mount the header side to
the FPC.
We have conducted evaluations on the
requirements needed for FPC rigidity. If you
need to mount the receptacle to the FPC,
contact your local Hirose Rep for this data.
Even when mounting the header side to FPC,
if the rigidity of FPC is low, the connector may
break as shown in the left fi gure. Please check
the strength and durability of FPC before using.
For the evaluation results of each item and FPC
rigidity, please contact us.
20
DF40 Series●0.4 mm Pitch, 1.5 to 4.0 mm Height, Board-to-Board and Board-to-FPC Connectors
USA:
HIROSE ELECTRIC (U.S.A.), INC. San Jose Office
3255 Scott Boulevard, Building 7, Suite 101
Santa Clara, CA 95054
Phone : +1-408-253-9640
Fax : +1-408-253-9641
http://www.hiroseusa.com
USA:
HIROSE ELECTRIC (U.S.A.), INC. Headquarters
2688 Westhills Court, Simi Valley, CA 93065-6235
Phone : +1-805-522-7958
Fax : +1-805-522-3217
http://www.hiroseusa.com
HONG KONG:
HIROSE ELECTRIC HONGKONG TRADING CO., LTD.
Room 1001, West Wing, Tsim Sha Tsui Centre, 66
Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong
Phone : +852-2803-5338
Fax : +852-2591-6560
http://www.hirose-hongkong.com.hk
CHINA:
HIROSE ELECTRIC TRADING (SHANGHAI) CO., LTD. Beijing Branch
A1001, Ocean International Center, Building 56# East 4th
Ring Middle Road, Chao Yang District, Beijing, 100025
Phone : +86-10-5165-9332
Fax : +86-10-5908-1381
http://www.hirose-china.com.cn
TAIWAN:
HIROSE ELECTRIC TAIWAN CO., LTD.
103 8F, No.87, Zhengzhou Rd., Taipei
Phone : +886-2-2555-7377
Fax : +886-2-2555-7350
http://www.hirose-taiwan.com.tw
GERMANY:
HIROSE ELECTRIC EUROPE B.V. German Branch
Herzog-Carl-Strasse 4 D-73760 Ostfildern
(Scharnhauser Park)
Phone : +49-711-4560-02-1
Fax : +49-711-4560-02-299
http://www.hirose.de
INDIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD. Bangalore Liaison office
Unit No.03, Ground Floor, Explorer Building International Tech
Park Whitefield Road, Bangalore 560066 Karnataka, India
Phone : +65-6324-6113
Fax : +65-6324-6123
http://www.hirose-singapore.com.sg
SINGAPORE:
HIROSE ELECTRIC SINGAPORE PTE. LTD.
10 Anson Road #26-1 International Plaza
079903
Phone : +65-6324-6113
Fax : +65-6324-6123
http://www.hirose-singapore.com.sg
THE NETHERLANDS:
HIROSE ELECTRIC EUROPE B.V.
Hogehillweg #8 1101 CC Amsterdam Z-O
Phone : +31-20-6557460
Fax : +31-20-6557469
http://www.hiroseeurope.com
UNITED KINGDOM:
HIROSE ELECTRIC EUROPE B.V. UK Branch
22 Vincent Avenue, Crownhill Business
Centre, Crownhill, Milton Keynes, MK8 0AB
Phone : +44-1908-305750
Fax : +44-1908-305768
http://www.hirose.co.uk
USA:
HIROSE ELECTRIC (U.S.A.), INC. Detroit Office (Automotive)
37677 Professional Center Drive, Suite #100C
Livonia, MI 48154
Phone : +1-734-542-9963
Fax : +1-734-542-9964
http://www.hiroseusa.com
CHINA:
HIROSE ELECTRIC TRADING (SHANGHAI) CO., LTD.
1601,Henderson Metropolitan,NO.300 ,East Nanjing
Road,Huangpu District, Shanghai,China 200001
Phone : +86-21-6391-3355
Fax : +86-21-6391-3335
http://www.hirose-china.com.cn
CHINA:
HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD.
Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre
5002, ShenNanDong Road, ShenZhen City, Guangdong Province, 518008
Phone : +86-755-8207-0851
Fax : +86-755-8207-0873
http://www.hirose-china.com.cn
KOREA:
HIROSE KOREA CO., LTD.
1261-10, Jeoungwhang-Dong, Shihung-City,
Kyunggi-Do 429-450
Phone : +82-31-496-7000,7124
Fax : +82-31-496-7100
http://www.hirose.co.kr
INDIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD Delhi Liaison Office
Suite No. 606 5th Floor SB Tower 1A/1 Sector
16 A Filmcity Noida 201301 Uttar Pradesh-India
Phone : +91-120-4804917
Fax : +91-120-4804949
http://www.hirose.com/sg/
MALAYSIA:
HIROSE ELECTRIC SINGAPORE PTE. LTD (Representative office)
1-10-07, Suntech @ Penang Cybercity (1164),Lintang
Mayang Pasir 3,11950, Bayan Baru, Penang, Malaysia.
Phone : +604-619-2564
Fax : +604-619-2574
http://www.hirose.com/sg/
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.
The contents of this catalog are current as of date of 11/2013. Contents are subject to change without notice for the purpose of improvements.
6-3,Nakagawa Chuoh-2-Chome,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN
TEL: +81-45-620-3526 Fax: +81-45-591-3726
http://www.hirose.com
http://www.hirose-connectors.com
®
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Hirose Electric:
DF40C-80DP-0.4V(51) DF40C-80DS-0.4V(51) DF40C-60DP-0.4V(51) DF40C-60DS-0.4V(51) DF40C-20DS-
0.4V(51) DF40C-24DS-0.4V(51) DF40C-30DS-0.4V(51) DF40C-40DS-0.4V(51) DF40C-50DS-0.4V(51) DF40C-
20DP-0.4V(51) DF40C-24DP-0.4V(51) DF40C-30DP-0.4V(51) DF40C-40DP-0.4V(51) DF40C-50DP-0.4V(51)
DF40C-100DP-0.4V(51) DF40C-100DS-0.4V(51) DF40C-10DP-0.4V(51) DF40C-10DS-0.4V(51) DF40B-10DS-
0.4V(51) DF40B-50DS-0.4V(51) DF40C(2.0)-20DS-0.4V(51) DF40C(2.0)-50DS-0.4V(51) DF40C(2.0)-60DS-0.4V(51)
DF40C-44DP-0.4V(51) DF40HC(2.5)-20DS-0.4V(51) DF40HC(2.5)-50DS-0.4V(51) DF40HC(3.0)-30DS-0.4V(51)
DF40HC(3.0)-44DS-0.4V(51) DF40HC(3.0)-50DS-0.4V(51) DF40HC(3.0)-60DS-0.4V(51) DF40HC(3.5)-60DS-0.4V(51)
DF40C-70DP-0.4V(51) DF40C-70DS-0.4V(51) DF40C(2.0)-80DS-0.4V(51) DF40HC(2.5)-60DS-0.4V(51)
DF40HC(3.5)-30DS-0.4V(51) DF40HC(3.5)-50DS-0.4V(51) DF40C-90DP-0.4V(51) DF40C-90DS-0.4V(51)
DF40B(2.0)-12DS-0.4V(51) DF40B(2.0)-80DS-0.4V(51) DF40C(2.0)-30DS-0.4V(51) DF40C(2.0)-40DS-0.4V(51)
DF40C(2.0)-40DS-0.4V(70) DF40C(2.0)-44DS-0.4V(70) DF40C(2.0)-50DS-0.4V(70) DF40C(2.0)-60DS-0.4V(52)
DF40C(2.0)-60DS-0.4V(70) DF40C(2.0)-70DS-0.4V(51) DF40C-12DP-0.4V(51) DF40C-20DS-0.4V(52) DF40C-20DS-
0.4V(70) DF40C-30DS-0.4V(70) DF40C-40DS-0.4V(52) DF40C-40DS-0.4V(70) DF40C-50DS-0.4V(52) DF40C-
50DS-0.4V(70) DF40C-60DS-0.4V(52) DF40C-70DS-0.4V(70) DF40C-80DS-0.4V(52) DF40HC(2.5)-30DS-0.4V(70)
DF40HC(2.5)-40DS-0.4V(70) DF40HC(3.0)-30DS-0.4V(70) DF40HC(3.0)-44DS-0.4V(70) DF40HC(3.0)-50DS-0.4V(70)
DF40HC(3.0)-60DS-0.4V(70) DF40HC(4.0)-40DS-0.4V(70) DF40HC(4.0)-60DS-0.4V(51) DF40HC(4.0)-80DS-
0.4V(51) DF40JC-10DP-0.4V(53) DF40JC-10DS-0.4V(53) DF40JC-20DS-0.4V(53) DF40JC-24DP-0.4V(53) DF40JC-
24DS-0.4V(53) DF40JC-30DS-0.4V(53) DF40JC-40DP-0.4V(53) DF40JC-40DS-0.4V(53) DF40JC-44DS-0.4V(53)
DF40JC-50DS-0.4V(53) DF40JC-60DP-0.4V(53) DF40JC-60DS-0.4V(53) DF40JC-70DS-0.4V(53) DF40JC-90DS-
0.4V(53) DF40RC-30DP-0.4V(51) DF40RC-40DP-0.4V(51) DF40SB-20DS-0.4V(51) DF40SB-24DS-0.4V(51)
DF40SB-40DS-0.4V(51) DF40HC(3.0)-90DS-0.4V(51) DF40HC(3.5)-80DS-0.4V(51) DF40HC(4.0)-90DS-0.4V(51)
DF40C-80DP-0.4V(58) DF40C-20DS-0.4V(58) DF40C-24DS-0.4V(58) DF40C-40DS-0.4V(58) DF40C-50DS-0.4V(58)
DF40C-24DP-0.4V(58) DF40C-40DP-0.4V(58) DF40C-50DP-0.4V(58) DF40C-70DP-0.4V(58)
