SPECIFICATION
PSP-500-5 PSP-500-12 PSP-500-13.5 PSP-500-15 PSP-500-24 PSP-500-27 PSP-500-48
MODEL
DCVOLTAGE
RATEDCURRENT
CURRENTRANGE
RATEDPOWER
OUTPUT VOLTAGE ADJ.RANGE
LINEREGULATION
LOADREGULATION
SETUP,RISETIME
HOLDUP TIME (Typ.)
VOLTAGERANGE Note.6
FREQUENCY RANGE
POWERFACTOR (Typ.)
EFFICIENCY (Typ.)
INPUT
INRUSHCURRENT (Typ.)
LEAKAGECURRENT
SAFETY STANDARDS
HARMONICCURRENT
EMSIMMUNITY
WORKINGTEMP.
WORKINGHUMIDITY
REMOTECONTROL
STORAGETEMP.,HUMIDITY
TEMP.COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
NOTE
PACKING
OVERLOAD
FUNCTION
ACCURRENT (Typ.)
5V 12V 13.5V 15V 24V 27V 48V
80A 41.5A 37A 33A 20.8A 18.5A 10.5A
0~80A 0~41.5A 0~37A 0~33A 0~20.8A 0~18.5A 0~10.5A
400W 498W 499.5W 495W 499.2W 499.5W 504W
100mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p
4.75~5.5V 10~13.2V 12~15V 13.5~18V 20~26.4V 24~30V 41~56V
2.0%
2.0%
1.0% 1.0% 1.0% 1.0% 1.0% 1.0%
0.5% 0.3% 0.3% 0.3% 0.2% 0.2%0.2%
0.5% 0.5% 0.5% 0.5% 0.5%0.5%
1500ms,50msatfullload
24msatfullload
90~264VAC127~370VDC
47~63Hz
0.95/230VAC0.98/100VACatfullload
76% 82% 82% 82% 84% 84% 86%
7A/115AVC3.5A/230VAC
20A/115VAC40A/230VAC
<1mA /240VAC
110~125% ratedoutputpower
5.75~6.75V
Protectiontype:Shutdowno/pvoltage,re-powerontorecover
13.8~16.2V 15.5~18.2V 18~21V 27.6~32.4V 31~36.5V 57.6~67.2V
Protectiontype:Constantcurrentlimiting,recoversautomaticallyafterfaultconditionisremoved
UL60950-1, TUVEN60950-1approved
CompliancetoEN55022(CISPR22)ClassB
Complianceto EN61000-3-2,-3
Complianceto EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024,lightindustrylevel,criteria A
-10~+60 (Refertooutputloadderatingcurve)
20~90%RHwith30CFMforcedairnon-condensing
-20~+85 ,10~95%RH
0.03%/ (0~50
10~500Hz,2G10min./1cycle,60min.eachalongX, Y,Zaxes
130.1Khrsmin.MIL-HDBK-217F(25 )
278*127*63.5mm(L*W*H)
2.6Kg;6pcs/15.7Kg/0.89CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. In parallel connection, maybe only one unit operated, if the total output load less than 5% of rated load condition.
6. Derating may be needed under low input voltages. Please check the derating curve for more details.
FileName:PSP-500-SPEC2008-12-30
RC+/RC-:0~0.8V=poweron;4~10V=poweroffsinkcurrent<4~10mA
OVERVOLTAGE
OVERTEMPERATURE RTH2 95 detectonheatsinkofQ1,Q7powertransistor&L3outputchoke
Protectiontype: Shutdowno/pvoltage,recoversautomaticallyaftertemperaturegoesdown
500WwithPFCandParallelFunction PSP-500 series
Universal AC input / Full range
Built-in active PFC function, PF>0.95
Protections: Short circuit / Overload / Over voltage / Over temperature
Foced air cooling by built-in DC fan
Current sharing up to 2000W(3+1)
With power good and fail signal output
Built-in remote ON-OFF control
Built-in remote sense function
3 years warranty
Features :
RIPPLE&NOISE(max.) Note.2
VOLTAGETOLERANCE Note.3
WITHSTANDVOLTAGE
ISOLATIONRESISTANCE
I/P-O/P:3KVACI/P-FG:1.5KVACO/P-FG:0.5KVAC
I/P-O/P,I/P-FG,O/P-FG:100MOhms/500VDC /25 /70%RH
ENVIRONMENT
SAFETY &
EMC
(Note4)
PROTECTION
EMICONDUCTION&RADIATION