SD5000C..R SERIES
STANDARD RECOVERY DIODES Hockey Puk Version
5570A
1
Bulletin I2034 rev. B 04/00
www.irf.com
Features
Wide current range
High voltage ratings up to 3000V
High surge current capabilities
Diffused junction
Hockey Puk version
Case style B-44 (R-PUK)
Typical Applications
Converters
Power supplies
High power drives
Auxiliary system supplies for traction applications
Major Ratings and Characteristics
IF(AV) 5570 A
@ Ths 55 °C
IF(RMS) 9400 A
@ Ths 25 °C
IFSM @ 50Hz 67800 A
@ 60Hz 71000 A
I2t@
50Hz 23000 KA2s
@ 60Hz 21000 KA2s
VRRM range 2000 to 3000 V
TJ- 40 to 160 °C
Parameters SD5000C..R Units
case style B-44 (R-PUK)
SD5000C..R Series
2
Bulletin I2034 rev. B 04/00
www.irf.com
Voltage VRRM , maximum repetitive VRSM , maximum non- IRRM max.
Type number Code peak reverse voltage repetitive peak rev. voltage @ TJ = 160°C
VVmA
20 2000 2100
24 2400 2500
26 2600 2700
30 3000 3100
ELECTRICAL SPECIFICATIONS
Voltage Ratings
IF(AV) Max. average forward current 5570 (2850) A 180° conduction, half sine wave
@ Heatsink temperature 55 (85) °C Double side (single side) cooled
IF(RMS) Max. RMS forward current 9400 A @ 25°C heatsink temperature double side cooled
IFSM Max. peak, one-cycle forward, 67800 t = 10ms No voltage
non-repetitive surge current 71000 t = 8.3ms reapplied
57000 t = 10ms 100% VRRM
59700 t = 8.3ms reapplied Sinusoidal halfwave,
I2t Maximum I2t for fusing 23000 t = 10ms No voltage Initial TJ = TJ max.
21000 t = 8.3ms reapplied
16260 t = 10ms 100% VRRM
14845 t = 8.3ms reapplied
I2√t Maximum I2√t for fusing 230000 KA2√s t = 0.1 to 10ms, no voltage reapplied
VF(TO)1 Low level value of threshold
voltage
VF(TO)2 High level value of threshold
voltage
rf1Low level value of forward
slope resistance
rf2High level value of forward
slope resistance
VFM Max. forward voltage drop 1.32 V Ipk= 8000A, TJ = TJ max, tp = 10ms sinusoidal wave
A
KA2s
0.774 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max.
Parameter SD5000C..R Units Conditions
Forward Conduction
V
mΩ
0.068 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max.
1.271 (I > π x IF(AV)),TJ = TJ max.
0.037 (I > π x IF(AV)),TJ = TJ max.
SD5000C..R 100
SD5000C..R Series
3
Bulletin I2034 rev. B 04/00
www.irf.com
∆RthJ-hs Conduction
(The following table shows the increment of thermal resistence RthJ-hs when devices operate at different conduction angles than DC)
Ordering Information Table
1- Diode
2- Essential part number
3- 0 = Standard recovery
4- C = Ceramic Puk
5- Voltage code: code x 100 = VRRM (see Voltage Ratings Table)
6- R = Puk Case B-44 (R-PUK)
123 4 5 6
Device Code
SD 500 0 C 30 R
Sinusoidal conduction Rectangular conduction
Conduction angle Units Conditions
Single Side Double Side Single Side Double Side
180°0.0009 0.0010 0.0006 0.0006
120°0.0010 0.0011 0.0010 0.0010
90°0.0013 0.0013 0.0014 0.0014 K/W TJ = TJ max.
60°0.0019 0.0019 0.0020 0.0020
30°0.0033 0.0033 0.0034 0.0034
TJMax. junction operating temperature range -40 to 160
Tstg Max. storage temperature range -55 to 200
RthJ-hs Max. thermal resistance, junction 0.02 DC operation single side cooled
to heatsink 0.01 DC operation double side cooled
F Mounting force, ± 10% 39200 N
(4000) (Kg)
wt Approximate weight 1590 g
Case style B-44 (R-PUK) See Outline Table
Parameter SD5000C..R Units Conditions
Thermal and Mechanical Specifications
K/W
°C
SD5000C..R Series
4
Bulletin I2034 rev. B 04/00
www.irf.com
Fig. 1 - Current Ratings Characteristics
Outline Table
Fig. 2 - Current Ratings Characteristics
40
60
80
100
120
140
160
0 1000200030004000
30° 60° 90° 120°
180°
Average Forward Current (A)
Maximum Allowable Heatsink Temperature (°C)
Conduction Angle
SD5000C..R Series
(Single Side Cooled)
R (DC) = 0.02 K/W
thJ-h s
20
40
60
80
100
120
140
160
0 1000 2000 3000 4000 5000 6000
30°
60°
90°
180°DC
120°
A ve rag e F orw a rd C urren t (A )
Maxim um Allowable Heatsink Tem perature (°C)
Conduction Period
SD 50 00C ..R Serie s
(Sing le Side C o oled)
R (D C ) = 0.02 K/W
th J-hs
3.5 (0.14) DIA. NOM. x
2.5 (0.10) DEEP MIN. BOTH ENDS
111 (4.37) D IA. MAX.
TWO PLACES
73.2 (2.88) DIA. MAX.
100.5 (3.96) DIA. MAX.
37.2 (1.46)
36.2 (1.43)
0.8 (0.03) MIN.
BOTH ENDS
Case Style B-44 (R-PUK)
All dimensions in millimeters (inches)
Quote between upper and lower
pole pieces has to be considered
after application of Mounting Force
(see Thermal and Mechanical
Specification)
SD5000C..R Series
5
Bulletin I2034 rev. B 04/00
www.irf.com
Fig. 3 - Current Ratings Characteristics Fig. 4 - Current Ratings Characteristics
Fig. 5 - Forward Power Loss Characteristics Fig. 6 - Forward Power Loss Characteristics
20
40
60
80
100
120
140
160
0 1000 2000 3000 4000 5000 6000 7000
30°
60°90°120°
180°
Average Forward Current (A)
Maximum Allowable Heatsink Temperature (°C)
Conduction Angle
SD 5000C..R Series
(Double Side Cooled)
R (DC) = 0.01 K/W
thJ-h s
0
2000
4000
6000
8000
10000
12000
0 1000 2000 3000 4000 5000 6000
180°
120°
90°
60°
30°
Average Forward Current (A)
Maxim um Average Forward Pow er Loss (W)
RMS Limit
Conduction Angle
SD5000C..R Series
T = 160°C
J
0
2000
4000
6000
8000
1000 0
1200 0
1400 0
0 2000 4000 6000 8000 10000
DC
180°
120°
90°
60°
30°
Average Forward Current (A)
RM S Lim it
M aximum Average Forw ard Pow er Loss (W )
Conduction Period
SD 5 000C ..R Se ries
T = 160°C
J
Fig. 7 - Maximum Non-Repetitive Surge Current
Single and Double Side Cooled
Fig. 8 - Maximum Non-Repetitive Surge Current
Single and Double Side Cooled
15000
20000
25000
30000
35000
40000
45000
50000
55000
60000
110100
Number Of Equal Amplitude Half Cycle Current Pulses (N)
Peak Half Sine W ave Forward Current (A)
SD5000C..R Series
Init ia l T = 160°C
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
J
At Any Rated Load Condition And With
Rated V Applied Following Surge.
RRM
10000
20000
30000
40000
50000
60000
70000
0.01 0.1 1
Pulse Train Duration (s)
Peak Half Sine W ave Forward Current (A)
SD 5000C..R Series
In it ia l T = 1 6 0 °C
N o V o lt a g e R e a p p lie d
Ra ted V Re ap plie d
RRM
J
V ersus Pu lse Tra in D ura tio n.
M aximum No n Repetitive Surge C urrent
20
40
60
80
100
120
140
160
0 2000 4000 6000 8000 10000
30°60°90°
180°DC
120°
Average Forward Current (A)
Maximum Allowable Heatsink Temperature (°C)
Conduction Period
SD5000C..R Series
(Double Side Cooled)
R (DC) = 0.01 K/W
th J- hs
SD5000C..R Series
6
Bulletin I2034 rev. B 04/00
www.irf.com
Fig. 10 - Thermal Impedance ZthJ-hs Characteristics
Fig. 9 - Forward Voltage Drop Characteristics
1000
10000
100000
0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5
T = 25°C
J
Instantaneous Forwa rd Voltage (V)
Instantaneous Forw ard Current (A)
SD5000C..R Series
T = 160°C
J
0.0001
0.001
0.01
0.1
0.0 01 0.0 1 0 .1 1 1 0 10 0
Sq ua re W ave Pulse D uration (s)
thJ-hs
Tra n sie n t Th e rm a l Im pe da n c e Z ( K/ W )
SD 5000C..R Series
Stea d y State Va lue
R = 0.02 K/W
(Single Side C ooled)
R = 0.01 K/W
(Double Side C ooled)
(D C Operation)
th J- hs
thJ-hs
