Planar Beam Lead PIN Diode For High Isolation Description Features Metelics' Planar Beam Lead PIN Diodes provide low microwave capacitance with exceptional lead strength. The high beam strength offers the users superior assemply yield. The Oxide / Nitride / Polyimide Passivation offers high reliability with low reverse leakage current and high temperature performance. * * * * Replacement for HPND-4005 Single / Common-Anode Configurations 4 Gram minimum Lead Pull Oxide / Nitride / Polyimide Triple Passivation for High Reliability Electrical Specifications, TA = 25 C Part Number Style IR Max. nA VBR Min. V CJ Max. pF RS Max. Typical ns Outline MPND4005-B15 Single 100 100 0.02 6.5 125 B15 MPND4005-B16 Common Anode 100 100 0.02 6.5 125 B16 I R=10 A VR = 10 V f = 15GHz I F = 20mA f = 3 GHz IF = 20 mA IR = 6 mA 50% Recovery Test Conditions NOTES: VR = 30 V 1. All devices available in a varity of packages - see outline drawings 2. Consult factory for special version, high reliability screening or custom designs Absolute Maximum Ratings Parameters Limit Total Power Dissipation 250 mW @ 25C Derate linearly to zero @ +175C Operation Temperature -65C to +175C Storage Temperature -65C to +200C Terminal Strength 4 grams Minimum Revision Date: 05/01/05 Planar Beam Lead PIN Diode For High Isolation Typical Performance, TA = 25 C Figure 1. Figure 2. Isolation vs Fre equency M!# # M! M! # RS ( ) # 6OLTS Isolation (dB) Forward Resistance vss Current Curre # # Frequency (GHz) B15 Outline B16 Outline Figure 3. Figure 4. B15 4.3 [0.109] 3.1 [0.079] I F (mA) 0.5 [0.013] 0.2 [0.005] B16 4.3 [0.109] 3.1 [0.079] Cathode 0.5 [0.013] 0.2 [0.005] 13.3 [0.338] 11.7 [0.297] 30.0 [0.762] 25.2 [0.640] 12.6 [0.320] 11.0 [0.279] 30.5 [0.775] 25.5 [0.648] 13.2 [0.335] 11.6 [0.295] Back Common Anode Back Dimensions in mils [mm] 10.2 [0.259] 8.6 [0.218] 10.2 [0.259] 8.6 [0.218] 3.5 [0.089] 1.5 [0.038] Dimensions in mils [mm] 3.5 [0.089] 1.5 [0.038] Back View Back View Aeroflex / Metelics Aeroflex Microelectronic Solutions 975 Stewart Drive, Sunnyvale, CA 94085 TEL: 408-737-8181 Fax: 408-733-7645 www.aeroflex-metelics.com sales@aeroflex-metelics.com Aeroflex / Metelics, Inc. reserves the right to make changes to any products and services herein at any time without notice. Consult Aeroflex or an authorized sales representative to verify that the information in this data sheet is current before using this product. Aeroflex does not assume any responsibility or liability arising out of the application or use of any product or service described herein, except as expressly agreed to in writing by Aeroflex; nor does the purchase, lease, or use of a product or service from Aeroflex convey a license under any patent rights, copyrights, trademark rights, or any other of the intellectual rights of Aeroflex or of third parties. Copyright 2003 Aeroflex / Metelics. All rights reserved. Revision Date: 05/01/05 attributes represented by these three icons: solution-minded, performance-driven and customer-focused. A17005 (-)