FAD1533024 - Carlo Gavazzi Group

Specifications are subject to change without notice (01.09.99) 1

Dupline®Field- and Installationbus

Type: Dupline

Output signal

Supply

Ordering Key

• Receivers with current signal output

• Current output signals:

FAD 1530: 1 x 0 to 1 mA

FAD 1531: 1 x 0 to 20 mA

FAD 1532: 1 x 4 to 20 mA

• 8-bit (8 channels) resolution

• For binary transmitted analogue signals

• Galvanically separated output

• D-housing

• Plug-in type module

• AC power supply

Product Description

Dupline analog receivers with

standard current output sig-

nals (0 to 1 mA, 0 to 20 mA, 4

to 20 mA). Convert binary

codes into analog current sig-

nals.

Type Selection

Supply Ordering no. Ordering no. Ordering no.

0 to 1 mA 0 to 20 mA 4 to 20 mA

24 VAC FAD 1530 024 FAD 1531 024 FAD 1532 024

120 VAC FAD 1530 120 FAD 1531 120 FAD 1532 120

220 VAC FAD 1530 220 FAD 1531 220 FAD 1532 220

Code module FMK A to FMK P FMK A to FMK P FMK A to FMK P

Output Specifications

FAD 1530 ... FAD 1531 ... FAD 1532 ...

Output 1 current output 1 current output 1 current output

Signal range 0 to 1 mA 0 to 20 mA 4 to 20 mA

Isolated in groups of 1 x 1 1 x 1 1 x 1

Output load resistance ≤10 kΩ≤350 Ω≤350 Ω

Resolution 8 bits (3.92 µA/LSB) 8 bits (78.43 µA/LSB) 8 bits (62.75 µA/LSB)

Settling time ≤1 pulse train + 10 ms ≤1 pulse train + 10 ms ≤1 pulse train + 10 ms

Short-circuit protection Yes Yes Yes

Short-circuit current 1 mA 20 mA 20 mA

Open loop voltage Approx. 15 V Approx. 15 V Approx. 15 V

Inaccuracy ≤1% of full scale ≤1% of full scale ≤1% of full scale

Cable length ≤3 m ≤3 m ≤3 m

Dielectric voltage

Output - Dupline ≥200 VAC (rms) ≥200 VAC (rms) ≥200 VAC (rms)

Receiver with Analog Current Output

Types FAD 1530, FAD 1531, FAD 1532

FAD 1530 024

2Specifications are subject to change without notice (01.09.99)

Supply Specifications

FAD 1530, FAD 1531, FAD 1532

General Specifications

Power supply Overvoltage cat. III (IEC 60664)

Rated operational voltage

through pins A1 & A2 220 230 VAC +6%,

-15% (IEC 60038)

120 120 VAC ± 10% (IEC 60038)

024 24 VAC ± 10%

Frequency 45 to 65 Hz

Voltage interruption ≤40 ms

Rated operational power Typ. 2.5 VA

Rated impulse 220 4 kV

withstand voltage 120 2.5 kV

024 800 V

Dielectric voltage

Supply - Dupline ≥2 kVAC (rms)

Supply - Output ≥2 kVAC (rms)

Output OFF delay

upon loss of Dupline carrier Undefined

Power ON delay Undefined, ≤1 s

Environment

Degree of protection IP 20

Pollution degree 3 (IEC 60664)

Operating temperature -20° to +50°C (-4° to +122°F)

Storage temperature -50° to +85°C (-58° to +185°F)

Humidity (non-condensing) 20 to 80%

Mechanical resistance

Shock 15 G (11 ms)

Vibration 2 G (6 to 55 Hz)

Dimensions

Material

(see "Technical Information") D-housing

Weight 200 g

Approvals CSA, UL

Operation DiagramMode of Operation

Receiver with current signal

output. The binary status of

an entire channel group (8 bit)

is converted to a current sig-

nal. The binary status of the

selected group may be gen-

erated by Dupline transmit-

ters with analog inputs (cur-

rent, voltage, temperature

etc.) or by PC’s.

The least significant bit (influ-

encing the output current by

0.392% of full scale) is the

highest channel of the select-

ed group (C8 if FMK C is

plugged in). The most signifi-

cant bit (influencing the output

current by 49.8% of full scale)

is the lowest channel of the

selected group (C1 in the

above example).

Note: Analog receivers must

not be used in systems where

channel generators with 2 or 3

sequences are installed.

Output

signal

Accessories

Socket◊D 411

Socket cover BB 5

Hold down spring◊HF

Front mounting bezel FRS 2

DIN-rail for D 411 FMD 411

For further information refer to "Accessories".

Wiring Diagram

Load

S: signal wire.

MSB =

Most Significant Bit

LSB =

Least Significant Bit

Channel status

Power

Supply