MICROCIRCUIT DATA SHEET Original Creation Date: 04/30/99 Last Update Date: 07/19/00 Last Major Revision Date: 07/05/00 MRLM137-K-RH REV 1A0 3-TERMINAL VOLTAGE REGULATOR, -37 VOLTS < VO < -1.25 VOLTS AT 1.5A GUARANTEED TO 30K RAD(Si) TESTED TO MIL-STD-883, METHOD 1019.5, CONDITION A General Description The LM137K is an adjustable 3-terminal negative voltage regulator capable of supplying in excess of 1.5A over an output voltage range of -1.2V to -37V. This regulator is exceptionally easy to apply, requiring only 2 external resistors to set the output voltage and 1 output capacitor for frequency compensation. The circuit design has been optimized for excellent regulation and low thermal transients. Futher, the LM137K features internal current limiting, thermal shutdown and safe-area compensation, making it virtually blowout-proof against overloads. The LM137K serves a wide variety of applications including local on-card regulation, programmable-output voltage regulation or precision current regulation. The LM137K is an ideal complement to the LM117K adjustable positive regulator. Industry Part Number NS Part Numbers LM137 LM137KPQML LM137KPQMLV Prime Die LM137 Controlling Document SEE FEATURES SECTION Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MICROCIRCUIT DATA SHEET MRLM137-K-RH REV 1A0 Features - Output voltage adjustable from -1.2V to -37V 1.5A output current guaranteed, -55 C to +150 C Line regulation typically 0.01%/V Load regulation typically 0.3% Excellent thermal regulation, 0.002%/W 50 ppm/ C temperature coefficient Temperature-independent current limit Internal thermal overload protection Stantard 3-lead transistor package Output short circuit protected CONTROLLING DOCUMENTS LM137KPQML 5962P9951702QYA LM137KPQMLV 5962P9951702VYA 2 MICROCIRCUIT DATA SHEET MRLM137-K-RH REV 1A0 (Absolute Maximum Ratings) (Note 1) Power Dissipation Internally Limited Input-Output Voltage Differential 40V Operating Junction Temperature -55 C < Ta < +150 C Maximum Junction Temperature (Note 2) 150 C Maximum Power Dissipation (@ 25 C) Minimum Input Voltage 28 Watts -41.25V Storage Temperature -65 C < Ta < +150 C Lead Temperature (Soldering, 10 seconds) Thermal Resistance ThetaJA (Still Air) (500LF/Min Air Flow) 300 C 40 C/W 14 C/W ThetaJC Package Weight (Typical) ESD Rating (Note 3) 4 C/W 12750mg 4000V Note 1: Note 2: Note 3: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Rating indicate conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. The maximum power dissipation must be derated at elevated temperatures and is dictated by Tjmax (maximum junction temperature), ThetaJA (package junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any temperature is Pdmax = (Tjmax - TA) /ThetaJA or the number given in the Absolute Maximum Ratings, whichever is lower. Human body model, 100pF discharged through 1.5K Ohms Recommended Operating Conditions Ta -55 C < Ta < +125 C Input Voltage Range -41.25V to -4.25V 3 MICROCIRCUIT DATA SHEET MRLM137-K-RH REV 1A0 Electrical Characteristics DC PARAMETERS: (SEE NOTE 3) SYMBOL Vout PARAMETER Output Voltage CONDITIONS NOTES Vin = -4.25V, Il = 5mA Vin = -4.25V, Il = 1.5A Vin = -41.25V, Il = 5mA Vin = -41.25V, Il = 200mA Vrline Vrload Line Regulation Load Regulation -41.25V < Vin < -4.25, Il = 5mA Vin = -6.25V, Il = 5mA to 1.5A Vin = -41.25V, Il = 5mA to 200mA PINNAME MIN MAX UNIT SUBGROUPS 3 -1.275 -1.225 V 1 3 -1.3 2, 3 3 -1.275 -1.225 V 1 3 -1.3 2, 3 3 -1.275 -1.225 V 1 3 -1.3 2, 3 3 -1.275 -1.225 V 1 3 -1.3 -1.2 V 2, 3 3 -9 9 mV 1 3 -23 23 mV 2, 3 3 -6 6 mV 1 3 -12 12 mV 2, 3 3 -6 6 mV 1 3 -12 12 mV 2, 3 -1.2 -1.2 -1.2 V V V Vrth Thermal Regulation Vin = -14.6V, Il = 1.5A 3 -5 5 mV 1 Iadj Adjust Pin Current Vin = -4.25V, Il = 5mA 3 25 100 uA 1, 2, 3 Vin = -41.25V, Il = 5mA 3 25 100 uA 1, 2, 3 Delta Iadj(line) Adjust Pin Current Change vs. Line Voltage -41.25V < Vin < -4.25, Il = 5mA 3 -5 5 uA 1, 2, 3 Delta Iadj(load) Adjust Pin Current Change vs. Load Current Vin = -6.25V, Il = 5mA to 1.5A 3 -5 5 uA 1, 2, 3 Ios Output Short Circuit Current Vin = -4.25V 3 1.5 3.5 A 1, 2, 3 Vin = -40V 3 0.2 1 A 1, 2, 3 Vin = -4.25V 3 -1.275 -1.225 V 1 3 -1.3 2, 3 3 -1.275 -1.225 V 1 3 -1.3 2, 3 Vout (Recovery) Output Voltage Recovery Vin = -40V 4 -1.2 -1.2 V V MICROCIRCUIT DATA SHEET MRLM137-K-RH REV 1A0 Electrical Characteristics DC PARAMETERS: (SEE NOTE 3) SYMBOL Iq Vstart Vout PARAMETER Minimum Load Current Voltage Start-up Output Voltage (Continued) CONDITIONS NOTES PINNAME MIN MAX UNIT SUBGROUPS Vin = -4.25V 3 0.2 3 mA 1, 2, 3 Vin = -14.25V 3 0.2 3 mA 1, 2, 3 Vin = -41.25V 3 1 5 mA 1, 2, 3 Vin = 4.25V, Il = 1.5A 3 -1.275 -1.225 V 1 3 -1.3 -1.2 V 2, 3 1, 3 -1.3 -1.2 V 2 50 dB 9 Vin = -6.25V, Il = 5mA AC PARAMETERS: (SEE NOTE 3) Delta Vin/Delta Vout Ripple Rejection Vin = -6.25V, ei = 1Vrms at 2400Hz, Il = 500mA 3 Vno Output Noise Voltage Vin = -6.25V, Il = 100mA 3 120 uVrms 9 Delta Vout/Delta Vin Line Transient Response Vin = -6.25V, Il = 100mA, Vpulse = -1V 3 80 mV/V 9 Delta Vout/Delta Il Load Transient Response Vin = -6.25V, Il = 100mA, Delta Il = 400mA 2, 3 60 mV 9 DC PARAMETERS: DRIFT VALUES (See NOTE 3) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: "Delta calculations performed on JAN S and QMLV devices at group B, subgroup 5 only". Vout Output Voltage Vin = -4.25V, Il = 5mA 3 -0.01 0.01 V 1 Vin = -4.25V, Il = 1.5mA 3 -0.01 0.01 V 1 Vin = -41.25V, Il = 5mA 3 -0.01 0.01 V 1 Vin = -41.25V, Il = 200mA 3 -0.01 0.01 V 1 Vrline Line Regulation Vin = -41.25V to -4.25, Il = 5mA 3 -4 4 mV 1 Iadj Adjust Pin Current Vin = -4.25V, Il = 5mA 3 -10 10 uA 1 Vin = -41.25V, Il = 5mA 3 -10 10 uA 1 DC PARAMETERS: POST RADIATION LIMITS +25 C (See NOTE 3) Delta Iadj (line) Adjust Pin Current Change vs. Line Voltage -41.25V < Vin < -4.25V, Il = 5mA 3 -20 20 uA 1 Vrload Load Regulation -6.25V, 5mA to 1.5A 3 -7.5 7.5 mV 1 5 MICROCIRCUIT DATA SHEET MRLM137-K-RH REV 1A0 Note 1: Note 2: Note 3: Tested at +125 C; correlated to 150 C. Limit of 0.15mV/mA is equivalent to 60mV. Pre and post irradiation limits are identical to those listed under AC and DC electrical characteristics except as listed in the Post Radiation Limits Table. These parts may be dose rate sensitive in a space environment and demonstrate enhanced low dose rate effect. Radiation end point limits for the noted parameters are guaranteed only for the conditions as specified in MIL-STD-883, Method 1019.5, Condition A. 6 MICROCIRCUIT DATA SHEET MRLM137-K-RH REV 1A0 Graphics and Diagrams GRAPHICS# DESCRIPTION 05191HRB4 METAL CAN (KA), TO-3, 2LD, LOW PROFILE (B/I CKT) K02CRE METAL CAN (KA), TO-3, 2LD, LOW PROFILE (P/P DWG) P000200A METAL CAN (KA), TO-3, 2 LD, LOW PROFILE (PINOUT) See attached graphics following this page. 7 VOUT ADJUSTMENT CASE IS INPUT LM137K, LM137HVK 2 - LEAD TO3 CONNECTION DIAGRAM BOTTOM VIEW P000200A N MIL/AEROSPACE OPERATIONS 2900 SEMICONDUCTOR DRIVE SANTA CLARA, CA 95050 MICROCIRCUIT DATA SHEET MRLM137-K-RH REV 1A0 Revision History Rev ECN # Originator Changes 0A0 M0003416 07/19/00 Rel Date Rose Malone Initial MDS Release: MRLM137-K-RH, Rev. 0A0 - Rad Hard Data Sheet. 1A0 M0003735 07/19/00 Rose Malone Update MDS: MRLM137-K-RH, Rev. 0A0 to MRLM137-K-RH, Rev. 1A0. Changes made in Absolute and Recommended Section, Post Radiaton Section, Delta Iadj Parameter from -10uA Min, 10uV Max to -20uA Min, 20uA Max. Added Vrload parameter in Post Radiaton Section. 8