74HC245; 74HCT245 Octal bus tranceiver; 3-state Rev. 03 -- 31 January 2005 Product data sheet 1. General description The 74HC245; 74HCT245 is a high-speed Si-gate CMOS device and is pin compatible with Low-Power Schottky TTL (LSTTL). The 74HC245; 74HCT245 is an octal transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions. The 74HC245; 74HCT245 features an output enable input (OE) for easy cascading and a send/receive input (DIR) for direction control. OE controls the outputs so that the buses are effectively isolated. The 74HC245; 74HCT245 is similar to the 74HC640; 74HCT640 but has true (non-inverting) outputs. 2. Features Octal bidirectional bus interface Non-inverting 3-state outputs Multiple package options Complies with JEDEC standard no. 7A ESD protection: HBM EIA/JESD22-A114-B exceeds 2000 V MM EIA/JESD22-A115-A exceeds 200 V Specified from -40 C to +85 C and from -40 C to +125 C 3. Quick reference data Table 1: Quick reference data GND = 0 V; Tamb = 25 C; tr = tf = 6 ns. Symbol Parameter Conditions Min Typ Max Unit CL = 15 pF; VCC = 5 V - 7 - ns Type 74HC245 tPHL, tPLH propagation delay An to Bn or Bn to An CI input capacitance - 3.5 - pF CI/O input/output capacitance - 10 - pF - 30 - pF - 10 - ns CPD power dissipation capacitance per transceiver VI = GND to VCC [1] Type 74HCT245 tPHL, tPLH propagation delay An to Bn or Bn to An CL = 15 pF; VCC = 5 V 74HC245; 74HCT245 Philips Semiconductors Octal bus tranceiver; 3-state Table 1: Quick reference data ...continued GND = 0 V; Tamb = 25 C; tr = tf = 6 ns. Symbol Parameter CI input capacitance CI/O input/output capacitance power dissipation capacitance per transceiver CPD [1] Conditions VI = GND to VCC - 1.5 V [1] Min Typ Max Unit - 3.5 - pF - 10 - pF - 30 - pF CPD is used to determine the dynamic power dissipation (PD in W): PD = CPD x VCC2 x fi x N + (CL x VCC2 x fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; (CL x VCC2 x fo) = sum of outputs. 4. Ordering information Table 2: Ordering information Type number Package Temperature range Name Description 74HC245N -40 C to +125 C DIP20 plastic dual in-line package; 20 leads (300 mil) SOT146-1 74HC245D -40 C to +125 C SO20 plastic small outline package; 20 leads; body width 7.5 mm SOT163-1 74HC245PW -40 C to +125 C TSSOP20 plastic thin shrink small outline package; 20 leads; SOT360-1 body width 4.4 mm 74HC245DB -40 C to +125 C SSOP20 plastic shrink small outline package; 20 leads; body width 5.3 mm 74HC245BQ -40 C to +125 C DHVQFN20 plastic dual-in-line compatible thermal enhanced SOT764-1 very thin quad flat package no leads; 20 terminals; body 2.5 x 4.5 x 0.85 mm 74HCT245N -40 C to +125 C DIP20 plastic dual in-line package; 20 leads (300 mil) SOT146-1 74HCT245D -40 C to +125 C SO20 plastic small outline package; 20 leads; body width 7.5 mm SOT163-1 74HCT245PW -40 C to +125 C TSSOP20 plastic thin shrink small outline package; 20 leads; SOT360-1 body width 4.4 mm 74HCT245DB -40 C to +125 C SSOP20 plastic shrink small outline package; 20 leads; body width 5.3 mm 74HCT245BQ -40 C to +125 C DHVQFN20 plastic dual-in-line compatible thermal enhanced SOT764-1 very thin quad flat package no leads; 20 terminals; body 2.5 x 4.5 x 0.85 mm 9397 750 14502 Product data sheet Version SOT339-1 SOT339-1 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 31 January 2005 2 of 22 74HC245; 74HCT245 Philips Semiconductors Octal bus tranceiver; 3-state 5. Functional diagram 1 DIR OE 2 B0 3 16 15 14 A5 13 A6 3EN1 3EN2 2 18 3 17 4 16 5 15 6 14 7 13 8 12 9 B6 9 2 A4 B5 8 G3 17 A3 B4 7 1 1 B3 6 19 A2 B2 5 18 A1 B1 4 19 A0 11 mna175 12 A7 B7 11 mna174 Fig 1. Logic symbol Fig 2. IEC logic symbol 9397 750 14502 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 31 January 2005 3 of 22 74HC245; 74HCT245 Philips Semiconductors Octal bus tranceiver; 3-state 6. Pinning information 1 terminal 1 index area 1 20 VCC A0 2 19 OE A1 3 18 B0 A2 4 17 B1 A3 5 16 B2 245 A0 2 19 OE A1 3 18 B0 A2 4 17 B1 A3 5 A4 6 A5 7 6 15 B3 A6 8 A5 7 14 B4 A7 9 A6 8 13 B5 A7 9 12 B6 GND 10 11 B7 15 B3 14 B4 GND(1) 13 B5 12 B6 GND 10 A4 001aac431 16 B2 245 B7 11 DIR 20 VCC DIR 6.1 Pinning 001aac432 Transparent top view (1) The die substrate is attached to this pad using conductive die attach material. It can not be used as supply pin or input Fig 3. Pin configuration DIP20, SO20, SSOP20 and TSSOP20 Fig 4. Pin configuration DHVQFN20 6.2 Pin description Table 3: Pin description Symbol Pin Description DIR 1 direction control A0 2 data input/output A1 3 data input/output A2 4 data input/output A3 5 data input/output A4 6 data input/output A5 7 data input/output A6 8 data input/output A7 9 data input/output GND 10 ground (0 V) B7 11 data input/output B6 12 data input/output B5 13 data input/output B4 14 data input/output B3 15 data input/output B2 16 data input/output 9397 750 14502 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 31 January 2005 4 of 22 74HC245; 74HCT245 Philips Semiconductors Octal bus tranceiver; 3-state Table 3: Pin description ...continued Symbol Pin Description B1 17 data input/output B0 18 data input/output OE 19 output enable input (active LOW) VCC 20 supply voltage 7. Functional description 7.1 Function table Table 4: Function table [1] Input Input/output OE DIR An Bn L L A=B input L H input B=A H X Z Z [1] H = HIGH voltage level; L = LOW voltage level; X = don't care; Z = high-impedance OFF-state. 8. Limiting values Table 5: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions VCC supply voltage Max Unit -0.5 +7 V IIK input diode current VI < -0.5 V or VI > VCC + 0.5 V - 20 mA IOK output diode current VO < -0.5 V or VO > VCC + 0.5 V - 20 mA IO output source or sink current VO = -0.5 V to VCC + 0.5 V - 35 mA ICC, IGND VCC or GND current - 70 mA Tstg storage temperature -65 +150 C Ptot [1] total power dissipation [1] DIP20 package - 750 mW SO20, SSOP20, TSSOP20 and DHVQFN20 packages - 500 mW For DIP20 packages: above 70 C, Ptot derates linearly with 12 mW/K. For SO20 packages: above 70 C, Ptot derates linearly with 8 mW/K. For SSOP20 and TSSOP20 packages: above 60 C, Ptot derates linearly with 5.5 mW/K. For DHVQFN20 packages: above 60 C, Ptot derates linearly with 4.5 mW/K. 9397 750 14502 Product data sheet Min (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 31 January 2005 5 of 22 74HC245; 74HCT245 Philips Semiconductors Octal bus tranceiver; 3-state 9. Recommended operating conditions Table 6: Recommended operating conditions Symbol Parameter Conditions Min Typ Max Unit Type 74HC245 VCC supply voltage 2.0 5.0 6.0 V VI input voltage 0 - VCC V VO output voltage 0 - VCC V tr, tf input rise and fall times VCC = 2.0 V - - 1000 ns VCC = 4.5 V - 6.0 500 ns VCC = 6.0 V - - 400 ns -40 - +125 C Tamb ambient temperature Type 74HCT245 VCC supply voltage 4.5 5.0 5.5 V VI input voltage 0 - VCC V VO output voltage 0 - VCC V tr, tf input rise and fall times - 6.0 500 ns Tamb ambient temperature -40 - +125 C Conditions Min Typ Max Unit VCC = 4.5 V 10. Static characteristics Table 7: Static characteristics type 74HC245 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Tamb = 25 C VIH VIL VOH HIGH-level input voltage LOW-level input voltage HIGH-level output voltage VCC = 2.0 V 1.5 1.2 - V VCC = 4.5 V 3.15 2.4 - V VCC = 6.0 V 4.2 3.2 - V VCC = 2.0 V - 0.8 0.5 V VCC = 4.5 V - 2.1 1.35 V VCC = 6.0 V - 2.8 1.8 V IO = -20 A; VCC = 2.0 V 1.9 2.0 - V IO = -20 A; VCC = 4.5 V 4.4 4.5 - V IO = -20 A; VCC = 6.0 V 5.9 6.0 - V IO = -6.0 mA; VCC = 4.5 V 3.98 4.32 - V IO = -7.8 mA; VCC = 6.0 V 5.48 5.81 - V VI = VIH or VIL 9397 750 14502 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 31 January 2005 6 of 22 74HC245; 74HCT245 Philips Semiconductors Octal bus tranceiver; 3-state Table 7: Static characteristics type 74HC245 ...continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Typ Max Unit VOL LOW-level output voltage VI = VIH or VIL IO = 20 A; VCC = 2.0 V - 0 0.1 V IO = 20 A; VCC = 4.5 V - 0 0.1 V IO = 20 A; VCC = 6.0 V - 0 0.1 V IO = 6.0 mA; VCC = 4.5 V - 0.15 0.26 V IO = 7.8 mA; VCC = 6.0 V - 0.16 0.26 V ILI input leakage current VI = VCC or GND; VCC = 6.0 V - - 0.1 A IOZ OFF-state output current VI = VIH or VIL; VO = VCC or GND; VCC = 6.0 V - - 0.5 A ICC quiescent supply current VI = VCC or GND; IO = 0 A; VCC = 6.0 V - - 8.0 A CI input capacitance - 3.5 - pF CI/O input/output capacitance - 10 - pF Tamb = -40 C to +85 C VIH VIL VOH VOL HIGH-level input voltage LOW-level input voltage HIGH-level output voltage LOW-level output voltage VCC = 2.0 V 1.5 - - V VCC = 4.5 V 3.15 - - V VCC = 6.0 V 4.2 - - V VCC = 2.0 V - - 0.5 V VCC = 4.5 V - - 1.35 V VCC = 6.0 V - - 1.8 V IO = -20 A; VCC = 2.0 V 1.9 - - V IO = -20 A; VCC = 4.5 V 4.4 - - V IO = -20 A; VCC = 6.0 V 5.9 - - V IO = -6.0 mA; VCC = 4.5 V 3.84 - - V IO = -7.8 mA; VCC = 6.0 V 5.34 - - V IO = 20 A; VCC = 2.0 V - - 0.1 V IO = 20 A; VCC = 4.5 V - - 0.1 V IO = 20 A; VCC = 6.0 V - - 0.1 V IO = 6.0 mA; VCC = 4.5 V - - 0.33 V IO = 7.8 mA; VCC = 6.0 V - - 0.33 V VI = VIH or VIL VI = VIH or VIL ILI input leakage current VI = VCC or GND; VCC = 6.0 V - - 1.0 A IOZ OFF-state output current VI = VIH or VIL; VO = VCC or GND; VCC = 6.0 V - - 5.0 A ICC quiescent supply current VI = VCC or GND; IO = 0 A; VCC = 6.0 V - - 80 A Tamb = -40 C to +125 C VIH HIGH-level input voltage VCC = 2.0 V 1.5 - - V VCC = 4.5 V 3.15 - - V VCC = 6.0 V 4.2 - - V 9397 750 14502 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 31 January 2005 7 of 22 74HC245; 74HCT245 Philips Semiconductors Octal bus tranceiver; 3-state Table 7: Static characteristics type 74HC245 ...continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Typ Max Unit VIL LOW-level input voltage VCC = 2.0 V - - 0.5 V VCC = 4.5 V - - 1.35 V VCC = 6.0 V - - 1.8 V VOH VOL HIGH-level output voltage LOW-level output voltage VI = VIH or VIL - IO = -20 A; VCC = 2.0 V 1.9 - - V IO = -20 A; VCC = 4.5 V 4.4 - - V IO = -20 A; VCC = 6.0 V 5.9 - - V IO = -6.0 mA; VCC = 4.5 V 3.7 - - V IO = -7.8 mA; VCC = 6.0 V 5.2 - - V VI = VIH or VIL - IO = 20 A; VCC = 2.0 V - - 0.1 V IO = 20 A; VCC = 4.5 V - - 0.1 V IO = 20 A; VCC = 6.0 V - - 0.1 V IO = 6.0 mA; VCC = 4.5 V - - 0.4 V IO = 7.8 mA; VCC = 6.0 V - - 0.4 V ILI input leakage current VI = VCC or GND; VCC = 6.0 V - - 1.0 A IOZ OFF-state output current VI = VIH or VIL; VO = VCC or GND; VCC = 6.0 V - - 10.0 A ICC quiescent supply current VI = VCC or GND; IO = 0 A; VCC = 6.0 V - - 160 A Conditions Min Typ Max Unit Table 8: Static characteristics type 74HCT245 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Tamb = 25 C VIH HIGH-level input voltage VCC = 4.5 V to 5.5 V 2.0 1.6 - V VIL LOW-level input voltage VCC = 4.5 V to 5.5 V - 1.2 0.8 V VOH HIGH-level output voltage VI = VIH or VIL; VCC = 4.5 V IO = -20 A 4.4 4.5 - V IO = -6 mA 3.98 4.32 - V IO = 20 A - 0 0.1 V IO = 6.0 mA - 0.15 0.26 V VOL LOW-level output voltage VI = VIH or VIL; VCC = 4.5 V ILI input leakage current VI = VCC or GND; VCC = 5.5 V - - 0.1 A IOZ OFF-state output current VI = VIH or VIL; VCC = 5.5 V; VO = VCC or GND per input pin; other inputs at VCC or GND; IO = 0 A - - 0.5 A ICC quiescent supply current VI = VCC or GND; IO = 0 A; VCC = 5.5 V - - 8.0 A 9397 750 14502 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 31 January 2005 8 of 22 74HC245; 74HCT245 Philips Semiconductors Octal bus tranceiver; 3-state Table 8: Static characteristics type 74HCT245 ...continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Typ Max Unit ICC additional quiescent supply current per input pin VI = VCC - 2.1 V; other inputs at VI = VCC or GND; VCC = 4.5 V to 5.5 V; IO = 0 A An or Bn inputs - 40 144 A OE input - 150 540 A DIR input - 90 324 A CI input capacitance - 3.5 - pF CI/O input/output capacitance - 10 - pF VCC = 4.5 V to 5.5 V 2.0 - - V - - 0.8 V IO = -20 A 4.4 - - V IO = -6 mA 3.84 - - V IO = 20 A - - 0.1 V IO = 6.0 mA - - 0.33 V Tamb = -40 C to +85 C VIH HIGH-level input voltage VIL LOW-level input voltage VCC = 4.5 V to 5.5 V VOH HIGH-level output voltage VI = VIH or VIL; VCC = 4.5 V VOL LOW-level output voltage VI = VIH or VIL; VCC = 4.5 V ILI input leakage current VI = VCC or GND; VCC = 5.5 V - - 1.0 A IOZ OFF-state output current VI = VIH or VIL; VCC = 5.5 V; VO = VCC or GND per input pin; other inputs at VCC or GND; IO = 0 A - - 5.0 A ICC quiescent supply current VI = VCC or GND; IO = 0 A; VCC = 5.5 V - - 80 A ICC additional quiescent supply current per input pin VI = VCC - 2.1 V; other inputs at VI = VCC or GND; VCC = 4.5 V to 5.5 V; IO = 0 A An or Bn inputs - - 180 A OE input - - 675 A DIR input - - 405 A Tamb = -40 C to +125 C VIH HIGH-level input voltage VCC = 4.5 V to 5.5 V 2.0 - - V VIL LOW-level input voltage VCC = 4.5 V to 5.5 V - - 0.8 V VOH HIGH-level output voltage VI = VIH or VIL; VCC = 4.5 V IO = -20 A 4.4 - - V IO = -6 mA 3.7 - - V IO = 20 A - - 0.1 V IO = 6.0 mA - - 0.4 V VOL LOW-level output voltage VI = VIH or VIL; VCC = 4.5 V ILI input leakage current VI = VCC or GND; VCC = 5.5 V - - 1.0 A IOZ OFF-state output current VI = VIH or VIL; VCC = 5.5 V; VO = VCC or GND per input pin; other inputs at VCC or GND; IO = 0 A - - 10 A 9397 750 14502 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 31 January 2005 9 of 22 74HC245; 74HCT245 Philips Semiconductors Octal bus tranceiver; 3-state Table 8: Static characteristics type 74HCT245 ...continued At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Typ Max Unit ICC quiescent supply current VI = VCC or GND; IO = 0 A; VCC = 5.5 V - - 160 A ICC additional quiescent supply current per input pin VI = VCC - 2.1 V; other inputs at VI = VCC or GND; VCC = 4.5 V to 5.5 V; IO = 0 A An or Bn inputs - - 196 A OE input - - 735 A DIR input - - 441 A Min Typ Max Unit propagation delay An to Bn or Bn see Figure 5 to An VCC = 2.0 V - 25 90 ns VCC = 4.5 V - 9 18 ns VCC = 5.0 V; CL = 15 pF - 7 - ns VCC = 6.0 V - 7 15 ns VCC = 2.0 V - 30 150 ns VCC = 4.5 V - 11 30 ns VCC = 6.0 V - 9 26 ns VCC = 2.0 V - 41 150 ns VCC = 4.5 V - 15 30 ns VCC = 6.0 V - 12 26 ns VCC = 2.0 V - 14 60 ns VCC = 4.5 V - 5 12 ns - 4 10 ns - 30 - pF propagation delay An to Bn or Bn see Figure 5 to An VCC = 2.0 V - - 115 ns VCC = 4.5 V - - 23 ns VCC = 6.0 V - - 20 ns 11. Dynamic characteristics Table 9: Dynamic characteristics type 74HC245 GND = 0 V; test circuit see Figure 7. Symbol Parameter Conditions Tamb = 25 C tPHL, tPLH tPZH, tPZL tPHZ, tPLZ tTHL, tTLH 3-state output enable time OE to An or OE to Bn 3-state output disable time OE to An or OE to Bn output transition time see Figure 6 see Figure 6 see Figure 5 VCC = 6.0 V CPD power dissipation capacitance per transceiver VI = GND to VCC [1] Tamb = -40 C to +85 C tPHL, tPLH 9397 750 14502 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 31 January 2005 10 of 22 74HC245; 74HCT245 Philips Semiconductors Octal bus tranceiver; 3-state Table 9: Dynamic characteristics type 74HC245 ...continued GND = 0 V; test circuit see Figure 7. Symbol Parameter Conditions tPZH, tPZL 3-state output enable time OE to An or OE to Bn see Figure 6 tPHZ, tPLZ tTHL, tTLH Min Typ Max Unit VCC = 2.0 V - - 190 ns VCC = 4.5 V - - 38 ns VCC = 6.0 V - - 33 ns VCC = 2.0 V - - 190 ns VCC = 4.5 V - - 38 ns VCC = 6.0 V - - 33 ns VCC = 2.0 V - - 75 ns VCC = 4.5 V - - 15 ns VCC = 6.0 V - - 13 ns propagation delay An to Bn or Bn see Figure 5 to An VCC = 2.0 V - - 135 ns VCC = 4.5 V - - 27 ns VCC = 6.0 V - - 23 ns 3-state output disable time OE to An or OE to Bn output transition time see Figure 6 see Figure 5 Tamb = -40 C to +125 C tPHL, tPLH tPZH, tPZL tPHZ, tPLZ tTHL, tTLH [1] 3-state output enable time OE to An or OE to Bn 3-state output disable time OE to An or OE to Bn output transition time see Figure 6 VCC = 2.0 V - - 225 ns VCC = 4.5 V - - 45 ns VCC = 6.0 V - - 38 ns see Figure 6 VCC = 2.0 V - - 225 ns VCC = 4.5 V - - 45 ns VCC = 6.0 V - - 38 ns see Figure 5 VCC = 2.0 V - - 90 ns VCC = 4.5 V - - 18 ns VCC = 6.0 V - - 15 ns CPD is used to determine the dynamic power dissipation (PD in W): PD = CPD x VCC2 x fi x N + (CL x VCC2 x fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; (CL x VCC2 x fo) = sum of outputs. 9397 750 14502 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 31 January 2005 11 of 22 74HC245; 74HCT245 Philips Semiconductors Octal bus tranceiver; 3-state Table 10: Dynamic characteristics type 74HCT245 GND = 0 V; test circuit see Figure 7. Symbol Parameter Conditions Min Typ Max Unit - 12 22 ns VCC = 5.0 V; CL = 15 pF - 10 - ns Tamb = 25 C tPHL, tPLH propagation delay An to Bn or Bn see Figure 5 to An VCC = 4.5 V tPZH, tPZL 3-state output enable time OE to An or OE to Bn VCC = 4.5 V; see Figure 6 - 16 30 ns tPHZ, tPLZ 3-state output disable time OE to An or OE to Bn VCC = 4.5 V; see Figure 6 - 16 30 ns tTHL, tTLH output transition time VCC = 4.5 V; see Figure 5 CPD power dissipation capacitance per transceiver VI = GND to VCC - 1.5 V [1] - 5 12 ns - 30 - pF Tamb = -40 C to +85 C tPHL, tPLH propagation delay An to Bn or Bn VCC = 4.5 V; see Figure 5 to An - - 28 ns tPZH, tPZL 3-state output enable time OE to An or OE to Bn VCC = 4.5 V; see Figure 6 - - 38 ns tPHZ, tPLZ 3-state output disable time OE to An or OE to Bn VCC = 4.5 V; see Figure 6 - - 38 ns tTHL, tTLH output transition time VCC = 4.5 V; see Figure 5 - - 15 ns tPHL, tPLH propagation delay An to Bn or Bn VCC = 4.5 V; see Figure 5 to An - - 33 ns tPZH, tPZL 3-state output enable time OE to An or OE to Bn VCC = 4.5 V; see Figure 6 - - 45 ns tPHZ, tPLZ 3-state output disable time OE to An or OE to Bn VCC = 4.5 V; see Figure 6 - - 45 ns tTHL, tTLH output transition time VCC = 4.5 V; see Figure 5 - - 18 ns Tamb = -40 C to +125 C [1] CPD is used to determine the dynamic power dissipation (PD in W): PD = CPD x VCC2 x fi x N + (CL x VCC2 x fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; (CL x VCC2 x fo) = sum of outputs. 9397 750 14502 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 31 January 2005 12 of 22 74HC245; 74HCT245 Philips Semiconductors Octal bus tranceiver; 3-state 12. Waveforms VI VM An, Bn input VM GND t PHL t PLH VOH 90 % VM VM Bn, An output 10 % VOL t THL t TLH 001aac433 Measurement points are given in Table 11. VOL and VOH are typical voltage output drop that occur with the output load. Fig 5. Input (An, Bn) to output (Bn, An) propagation delays and output transition times tr VI tf 90 % OE input VM GND 10 % tPLZ tPZL VCC output LOW-to-OFF OFF-to-LOW VM 10 % VOL tPHZ VOH output tPZH 90 % HIGH-to-OFF OFF-to-HIGH VM GND outputs enabled outputs enabled outputs disabled 001aac479 Measurement points are given in Table 11. VOL and VOH are typical voltage output drop that occur with the output load. Fig 6. 3-state output enable and disable times Table 11: Type Measurement points Input Output VM VM 74HC245 0.5VCC 0.5VCC 74HCT245 1.3 V 1.3 V 9397 750 14502 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 31 January 2005 13 of 22 74HC245; 74HCT245 Philips Semiconductors Octal bus tranceiver; 3-state VCC VCC PULSE GENERATOR VI VO RL = 1 k open D.U.T RT CL 50 pF mgk563 Test data is given in Table 12. Definitions test circuit: RT = Termination resistance should be equal to output impedance Zo of the pulse generator. CL = Load capacitance including jig and probe capacitance. RL = Load resistor. Fig 7. Load circuitry for switching times Table 12: Type Test data Input Test VI tr, tf tPHL, tPLH tPZH, tPHZ tPZL, tPLZ 74HC245 VCC 6 ns open GND VCC 74HCT245 3V 6 ns open GND VCC 9397 750 14502 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 31 January 2005 14 of 22 74HC245; 74HCT245 Philips Semiconductors Octal bus tranceiver; 3-state 13. Package outline DIP20: plastic dual in-line package; 20 leads (300 mil) SOT146-1 ME seating plane D A2 A A1 L c e Z b1 w M (e 1) b MH 11 20 pin 1 index E 1 10 0 5 10 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT A max. A1 min. A2 max. b b1 c mm 4.2 0.51 3.2 1.73 1.30 0.53 0.38 0.36 0.23 26.92 26.54 inches 0.17 0.02 0.13 0.068 0.051 0.021 0.015 0.014 0.009 1.060 1.045 D e e1 L ME MH w Z (1) max. 6.40 6.22 2.54 7.62 3.60 3.05 8.25 7.80 10.0 8.3 0.254 2 0.25 0.24 0.1 0.3 0.14 0.12 0.32 0.31 0.39 0.33 0.01 0.078 (1) E (1) Note 1. Plastic or metal protrusions of 0.25 mm (0.01 inch) maximum per side are not included. OUTLINE VERSION SOT146-1 REFERENCES IEC JEDEC JEITA MS-001 SC-603 EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-13 Fig 8. Package outline SOT146-1 (DIP20) 9397 750 14502 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 31 January 2005 15 of 22 74HC245; 74HCT245 Philips Semiconductors Octal bus tranceiver; 3-state SO20: plastic small outline package; 20 leads; body width 7.5 mm SOT163-1 D E A X c HE y v M A Z 20 11 Q A2 A (A 3) A1 pin 1 index Lp L 10 1 e bp detail X w M 0 5 10 mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (1) e HE L Lp Q v w y mm 2.65 0.3 0.1 2.45 2.25 0.25 0.49 0.36 0.32 0.23 13.0 12.6 7.6 7.4 1.27 10.65 10.00 1.4 1.1 0.4 1.1 1.0 0.25 0.25 0.1 0.01 0.019 0.013 0.014 0.009 0.51 0.49 0.30 0.29 0.05 0.419 0.043 0.055 0.394 0.016 inches 0.1 0.012 0.096 0.004 0.089 0.043 0.039 0.01 0.01 Z (1) 0.9 0.4 0.035 0.004 0.016 o 8 o 0 Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. REFERENCES OUTLINE VERSION IEC JEDEC SOT163-1 075E04 MS-013 JEITA EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-19 Fig 9. Package outline SOT163-1 (SO20) 9397 750 14502 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 31 January 2005 16 of 22 74HC245; 74HCT245 Philips Semiconductors Octal bus tranceiver; 3-state SSOP20: plastic shrink small outline package; 20 leads; body width 5.3 mm D SOT339-1 E A X c HE y v M A Z 20 11 Q A2 A (A 3) A1 pin 1 index Lp L 1 10 w M bp e detail X 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (1) e HE L Lp Q v w y Z (1) mm 2 0.21 0.05 1.80 1.65 0.25 0.38 0.25 0.20 0.09 7.4 7.0 5.4 5.2 0.65 7.9 7.6 1.25 1.03 0.63 0.9 0.7 0.2 0.13 0.1 0.9 0.5 8 o 0 o Note 1. Plastic or metal protrusions of 0.2 mm maximum per side are not included. OUTLINE VERSION SOT339-1 REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-19 MO-150 Fig 10. Package outline SOT339-1 (SSOP20) 9397 750 14502 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 31 January 2005 17 of 22 74HC245; 74HCT245 Philips Semiconductors Octal bus tranceiver; 3-state TSSOP20: plastic thin shrink small outline package; 20 leads; body width 4.4 mm SOT360-1 E D A X c HE y v M A Z 11 20 Q A2 (A 3) A1 pin 1 index A Lp L 1 10 e detail X w M bp 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D (1) E (2) e HE L Lp Q v w y Z (1) mm 1.1 0.15 0.05 0.95 0.80 0.25 0.30 0.19 0.2 0.1 6.6 6.4 4.5 4.3 0.65 6.6 6.2 1 0.75 0.50 0.4 0.3 0.2 0.13 0.1 0.5 0.2 8 o 0 o Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION SOT360-1 REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 99-12-27 03-02-19 MO-153 Fig 11. Package outline SOT360-1 (TSSOP20) 9397 750 14502 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 31 January 2005 18 of 22 74HC245; 74HCT245 Philips Semiconductors Octal bus tranceiver; 3-state DHVQFN20: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; SOT764-1 20 terminals; body 2.5 x 4.5 x 0.85 mm A B D A A1 E c detail X terminal 1 index area terminal 1 index area C e1 e 2 9 y y1 C v M C A B w M C b L 1 10 Eh e 20 11 19 12 Dh X 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT mm A(1) max. A1 b 1 0.05 0.00 0.30 0.18 c D (1) Dh E (1) Eh 0.2 4.6 4.4 3.15 2.85 2.6 2.4 1.15 0.85 e 0.5 e1 L v w y y1 3.5 0.5 0.3 0.1 0.05 0.05 0.1 Note 1. Plastic or metal protrusions of 0.075 mm maximum per side are not included. REFERENCES OUTLINE VERSION IEC JEDEC JEITA SOT764-1 --- MO-241 --- EUROPEAN PROJECTION ISSUE DATE 02-10-17 03-01-27 Fig 12. Package outline SOT764-1 (DHVQFN20) 9397 750 14502 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 31 January 2005 19 of 22 74HC245; 74HCT245 Philips Semiconductors Octal bus tranceiver; 3-state 14. Revision history Table 13: Revision history Document ID Release date Data sheet status Change notice Doc. number Supersedes 74HC_HCT245_3 20050131 Product data sheet - 9397 750 14502 74HC_HCT245_CNV_2 Modifications: 74HC_HCT245_CNV_2 * The format of this data sheet is redesigned to comply with the new presentation and information standard of Philips Semiconductors * Section 4 "Ordering information", Section 6 "Pinning information" and Section 13 "Package outline" are modified to include the DHVQFN20 package. 19930930 Product specification - 9397 750 14502 Product data sheet - - (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 31 January 2005 20 of 22 74HC245; 74HCT245 Philips Semiconductors Octal bus tranceiver; 3-state 15. Data sheet status Level Data sheet status [1] Product status [2] [3] Definition I Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data Production This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). [1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. [3] For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 16. Definitions 17. Disclaimers Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 18. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com 9397 750 14502 Product data sheet (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Rev. 03 -- 31 January 2005 21 of 22 Philips Semiconductors 74HC245; 74HCT245 Octal bus tranceiver; 3-state 19. Contents 1 2 3 4 5 6 6.1 6.2 7 7.1 8 9 10 11 12 13 14 15 16 17 18 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 3 Pinning information . . . . . . . . . . . . . . . . . . . . . . 4 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 4 Functional description . . . . . . . . . . . . . . . . . . . 5 Function table . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 5 Recommended operating conditions. . . . . . . . 6 Static characteristics. . . . . . . . . . . . . . . . . . . . . 6 Dynamic characteristics . . . . . . . . . . . . . . . . . 10 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 15 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 20 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 21 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Contact information . . . . . . . . . . . . . . . . . . . . 21 (c) Koninklijke Philips Electronics N.V. 2005 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 31 January 2005 Document number: 9397 750 14502 Published in The Netherlands