F#9#B?J; F98IJ7D:E<<I<EH8?%JH?#B;7:9ECFED;DJI IF;9?<?97J?EDI C7J;H?7B Standoff - Thermoplastic U.L. 94 V0. Color, Black :;I?=D Channels provide lead separation and lateral stability for components. Molded tabs retain component leads within the standoff for preassembly. Raised pads allow for easy PCB cleaning. CEKDJ?D= Suitable for passive components, bi-lead, tri-lead, 3mm, 5mm, LEDs, resistors, capacitors, diodes. Standoffs vary in height from .100 minimum to 1.0 maximum, increments of .010 . EH:;H?D=9E:;I STD XXX BLK LENGTH IN INCHES COLOR U.S. & Foreign Patents Issued and Pending (.100 to 1.0 ) 100 110 120 130 140 150 160 170 180 190 200 210 220 230 240 250 260 270 280 290 300 310 320 330 340 350 360 370 380 390 400 410 420 430 440 450 460 470 480 490 500 510 520 530 540 550 560 570 580 EKJB?D;:H7M?D= 590 600 610 620 630 640 650 660 670 680 690 700 710 720 730 740 750 760 770 780 790 800 810 820 830 840 850 860 870 880 890 900 910 920 930 940 950 960 970 980 990 1.0 CEKDJ?D=9ED<$ SINGLE LEAD BI-LEAD TRI-LEAD 7FFB?97J?ED (R) P-C-LITE component standoffs are designed for printed circuit board mounting of multi-lead devices ie. LEDs, IR emitter/detectors, lamps, resistors, capacitors, transistors and diodes. L;HI7J?B?JO (R) P-C-LITE component standoffs cope with various problems in mounting passive components. These include height control, lateral stability, lead retention, lead shorting and removal of soldering residue. :;I?=D (R) P-C-LITE component standoffs provide lead separation and retention for both bi and tri-lead components. Molded tabs retain the component and standoff as a unit permitting preassembly operations. Clearance pads are provided for proper PCB cleaning. ?DIJ7BB7J?ED (R) P-C-LITE component standoffs permit the use of various shapes and sizes of LEDs, as well as other bi/tri-lead components. Device height control is simplified with mounts ranging in lengths from .100 to 1.00 in increments of .010 . F98CEKDJ<EH8?%JH?#B;7:B;:i IF;9?<?97J?EDI C7J;H?7B Housing - Thermoplastic (black) U.L. 94 V0. :;I?=D PCH 175 - Right angle through-hole mount for LEDs. Can be used as a single LED mount or banded together in an array with its dove-tail interlocking feature. When banded together with the PCH 175 the LEDs are on .250 centers. B;:i 5mm size - round or rectangular shape with or without flange. Bi-lead, standard .100 lead spacing. Tri-lead, either .050 or .100 lead spacing. Both the bi-lead and tri-lead LEDs can also be combined in arrays with one another. H;I?IJEHI;B;9JEH U.S. & Foreign Patents Issued and Pending EH:;H?D=9E:;I PCH 175 MODEL F98CEKDJ?D= <;7JKH;I BI & TRI-LEAD LEDs LEDs IN ARRAYS * Right angle PCB mount for bi and tri-lead LEDs for use as logic and diagnostic indicators. * Accommodates round and rectangular shapes of LEDs with or without flanges. * Dove-tail interlock feature allows mounting of both mono and multi-colored LEDs. * Mount forms LED leads which are locked into position by retaining tabs. Form leads with the mount, snap leads into retaining tabs. '$.&&$+(($++*, Bi-lead and tri-lead LEDs can be combined with dove-tail interlocking feature. * Formed LED leads are staggered in their length permitting easier PCB insertion. * Molded standoffs permit the easy cleaning of PCB after wave soldering operation. lYYiWb[i6lYYb_j[$Yec mmm$L99B?J;$Yec )'