ACT-S128K32V High Speed 3.3Volt 4 Megabit SRAM Multichip Module Features 4 Low Power CMOS 128K x 8 SRAMs in one MCM Overall configuration as 128K x 32 Input and Output TTL Compatible 17, 20, 25, 35, 45 & 55ns Access Times, 15ns Available by Special Order Full Military (-55C to +125C) Temperature Range +5V Power Supply Choice of 5 Hermetically sealed Co-fired Packages: 68-Lead, Dual-Cavity CQFP (F2), 0.88"SQ x 0.20"max (0.18"max thickness available, contact factory for details) (Drops into the 68 Lead JEDEC 0.99"SQ CQFJ footprint) 66-Lead, PGA-Type (P2,P6 with/without shoulders), 1.185"SQ x 0.245"max 66-Lead, PGA-Type (P7,P3 with/without shoulders), 1.08"SQ x 0.160"max CIRCUIT TECHNOLOGY www.aeroflex.com/act1.htm General Description Internal Decoupling Capacitors DESC SMD# Pending Block Diagram - PGA Type Package(P2,P3) & CQFP(F2) WE1 CE1 WE2 CE2 WE3 CE3 WE4 CE4 A0 - A16 OE 128Kx8 128Kx8 128Kx8 128Kx8 8 8 8 8 I/O0-7 I/O8-15 I/O16-23 I/O24-31 Pin Description I/O0-31 Data I/O A0-16 Address Inputs WE1-4 Write Enables CE1-4 Chip Enables OE Output Enable Vcc Power Supply GND Ground NC Not Connected Utilizing Samsung SRAM die, the ACT-S128K32V is a High Speed 4 megabit CMOS SRAM Multichip Module (MCM) designed for full temperature range, 3.3V Power Supply, military, space, or high reliability mass memory and fast cache applications. The MCM can be organized as a 128K x 32 bits, 256K x 16 bits or 512k x 8 bits device and is input and output TTL compatible. Writing is executed when the write enable (WE) and chip enable (CE) inputs are low. Reading is accomplished when WE is high and CE and output enable (OE) are both low. Access time grades of 17ns, 20ns, 25ns, 35ns, 45ns and 55ns maximum are standard. The products are designed for operation over the temperature range of -55C to +125C and screened under the full military environment. DESC Standard Military Drawing (SMD) part numbers are pending. The ACT-S128K32V is manufactured in Aeroflex's 80,000ft2 MIL-PRF-38534 certified facility in Plainview, N.Y. eroflex Circuit Technology - Advanced Multichip Modules (c) SCD3359 REV A 10/4/97 Absolute Maximum Ratings Symbol Rating TC TSTG PD Range Units Case Operating Temperature -55 to +125 C Storage Temperature -65 to +150 C F1, P2/P6, P3/P7 Packages 3.0 W F2 Package 2.7 W F1, P2/P6, P3/P7 Packages 3.0 C/W F2 Package 9.0 C/W -0.5 to +7 V 300 C Maximum Package Power Dissipation OJ-C Hottest Die, Max Thermal Resistance - Junction to Case VG Maximum Signal Voltage to Ground TL Maximum Lead Temperature (10 seconds) Normal Operating Conditions Symbol Minimum Maximum Units Power Supply Voltage +3.0 +3.6 V VIH Input High Voltage +2.0 VCC + 0.3 V VIL Input Low Voltage -0.3 +0.8 V VCC Parameter Truth Table Mode Standby Read Read Write CE H L L L OE X L H X WE X H H L Data I/O High Z Data Out High Z Data In Power Standby (deselect/power down) Active Active (deselected) Active Capacitance (f = 1MHz, TC = 25C) Symbol Parameter Maximum Units CAD A0 - A16 Capacitance 50 pF COE OE Capacitance 50 pF CWE Write Enable Capacitance 20 pF CCE Chip Enable Capacitance 20 pF CI/O I/O0 - I/O31 Capacitance 20 pF Capacitance is guaranteed by design but not tested. DC Characteristics (3.0Vdc< VCC < 3.6Vdc, VSS = 0V, TC = -55C to +125C, Unless otherwise specified) Parameter Sym Conditions -017 & -020 -025 & -035 -045 & -055 Units Min Max Min Max Min Max Input Leakage Current ILI VCC = Max, VIN = 0 or VCC 10 10 10 A Output Leakage Current ILO CE = VIH, OE = VIH, VOUT = 0 or VCC 10 10 10 A 600 500 420 mA Operating Supply Current 32 Bit Mode Aeroflex Circuit Technology CE = VIL, OE = VIH, ICCx32 f = 5 MHz, VCC = Max, CMOS Compatible 2 SCD3359 REV A 10/3/97 Plainview NY (516) 694-6700 DC Characteristics (3.0Vdc< VCC < 3.6Vdc, VSS = 0V, TC = -55C to +125C, Unless otherwise specified) Parameter Sym -017 & -020 -025 & -035 -045 & -055 Units Min Max Min Max Min Max Conditions Standby Current ISB CE = VIH, OE = VIH, f = 5 MHz, VCC = Max, CMOS Compatible 80 60 60 mA Output Low Voltage VOL IOL = 8 mA, VCC = Min 0.4 0.4 0.4 V Output High Voltage VOH IOH = -4.0 mA, VCC = Min 2.4 2.4 2.4 V AC Characteristics (VCC = 3.3V, VSS = 0V, TC = -55C to +125C) Read Cycle Parameter Sym -017 Min Max -020 Min Max -025 Min Max -035 Min Max -045 -055 Min Max Min Max 17 20 25 35 45 Units 55 ns Read Cycle Time tRC Address Access Time tAA 17 20 25 35 45 55 ns Chip Enable Access Time tACE 17 20 25 35 45 55 ns Output Hold from Address Change tOH Output Enable to Output Valid tOE Chip Enable to Output in Low Z * tCLZ 3 3 3 3 3 3 ns Output Enable to Output in Low Z * tOLZ 0 0 0 0 0 0 ns Chip Deselect to Output in High Z * tCHZ 12 12 12 15 20 20 ns Output Disable to Output in High Z * tOHZ 10 11 12 15 20 20 ns 0 0 9 5 12 5 15 5 20 5 25 ns 30 ns * Parameters guaranteed by design but not tested Write Cycle Parameter Sym -020 -025 -035 -045 -055 -017 Min Max Min Max Min Max Min Max Min Max Min Max Units Write Cycle Time tWC 17 20 25 35 45 55 ns Chip Enable to End of Write tCW 12 15 20 25 30 40 ns Address Valid to End of Write tAW 12 15 20 25 30 40 ns Data Valid to End of Write tDW 10 12 15 18 20 20 ns Write Pulse Width tWP 13 15 20 25 30 40 ns Address Setup Time tAS 0 0 0 0 0 0 ns Output Active from End of Write * tOW 3 3 3 4 4 4 ns Write to Output in High Z * tWHZ Data Hold from Write Time tDH 0 0 0 0 0 0 ns Address Hold Time tAH 0 0 0 0 0 0 ns 10 10 10 15 15 15 * Parameters guaranteed by design but not tested Aeroflex Circuit Technology 3 SCD3359 REV A 10/3/97 Plainview NY (516) 694-6700 ns AC Characteristics (3.0Vdc< VCC < 3.6Vdc, VSS = 0V, TC = -55C to +125C, Unless otherwise specified) Read Cycle Parameter Sym -017 Min Max -020 Min Max -025 Min Max -035 Min Max -045 -055 Min Max Min Max 17 20 25 35 45 Units 55 ns Read Cycle Time tRC Address Access Time tAA 17 20 25 35 45 55 ns Chip Enable Access Time tACE 17 20 25 35 45 55 ns Output Hold from Address Change tOH Output Enable to Output Valid tOE Chip Enable to Output in Low Z * tCLZ 3 3 3 3 3 3 ns Output Enable to Output in Low Z * tOLZ 0 0 0 0 0 0 ns Chip Deselect to Output in High Z * tCHZ 12 12 12 20 20 20 ns Output Disable to Output in High Z * tOHZ 12 12 12 20 20 20 ns 0 0 10 0 12 0 15 0 20 0 ns 25 30 ns * Parameters guaranteed by design but not tested Write Cycle Parameter Sym -020 -025 -035 -045 -055 -017 Min Max Min Max Min Max Min Max Min Max Min Max Units Write Cycle Time tWC 17 20 25 35 45 55 ns Chip Enable to End of Write tCW 14 15 20 25 30 45 ns Address Valid to End of Write tAW 15 15 20 25 30 45 ns Data Valid to End of Write tDW 10 12 15 20 25 25 ns Write Pulse Width tWP 14 15 20 25 30 45 ns Address Setup Time tAS 0 0 0 0 0 0 ns Output Active from End of Write * tOW 3 3 3 4 4 4 ns Write to Output in High Z * tWHZ Data Hold from Write Time tDH 0 0 0 0 0 0 ns Address Hold Time tAH 0 0 0 0 0 0 ns 10 12 15 20 25 25 * Parameters guaranteed by design but not tested Data Retention Electrical Characteristics (Special Order Only) (TC = -55C to +125C) Parameter Sym VCC for Data Retention VDR Data Retention Current ICCDR1 Aeroflex Circuit Technology Test Conditions CE VCC - 0.2V Min 2 VCC = 3V, 17-55ns 4 All Speeds Max Units 3.6 V 10.4 mA SCD3359 REV A 10/3/97 Plainview NY (516) 694-6700 ns Timing Diagrams Read Cycle Timing Diagrams Write Cycle Timing Diagrams Write Cycle 1 (WE Controlled, OE = VIL) Read Cycle 1 (CE = OE = VIL, WE = VIH) tWC tRC A0-16 A0-16 tAA tAW tCW tOH DI/O Previous Data Valid tAH CE Data Valid tAS tWP WE tOW SEE NOTE tWHZ tDH tDW SEE NOTE DI/O Data Valid Read Cycle 2 (WE = VIH) tRC Write Cycle 2 (CE Controlled, OE = VIH ) A0-16 tWC tAA A0-16 tAH tAW CE tACE tAS tCHZ tCLZ SEE NOTE CE tOHZ WE tCW SEE NOTE OE tWP tOE SEE NOTE tOLZ SEE NOTE DI/O tDW DI/O UNDEFINED tDH Data Valid High Z Data Valid Note: Guaranteed by design, but not tested. DON'T CARE Note: Guaranteed by design, but not tested. AC Test Circuit Current Source IOL VZ ~ 1.5 V (Bipolar Supply) To Device Under Test CL = 50 pF IOH Parameter Input Pulse Level Input Rise and Fall Input and Output Timing Reference Output Lead Capacitance Typical 0 - 3.0 5 1.5 50 Units V ns V pF Current Source Notes: 1) VZ is programmable from -2V to +7V. 2) IOL and IOH programmable from 0 to 16 mA. 3) Tester Impedance ZO = 75. 4) VZ is typically the midpoint of VOH and VOL. 5) IOL and IOH are adjusted to simulate a typical resistance load circuit. 6) ATE Tester includes jig capacitance. Aeroflex Circuit Technology 5 SCD3359 REV A 10/3/97 Plainview NY (516) 694-6700 Pin Numbers & Functions 66 Pins -- PGA-Type Pin # Function Pin # Function Pin # Function Pin # Function Pin # Function Pin # Function Pin # Function 1 I/O8 11 I/O2 21 NC 31 I/O6 41 A9 51 A5 61 A1 2 I/O9 12 WE2 22 I/O3 32 I/O5 42 I/O16 52 WE3 62 A2 3 I/O10 13 CE2 23 I/O15 33 I/O4 43 I/O17 53 CE3 63 I/O23 4 A13 14 GND 24 I/O14 34 I/O24 44 I/O18 54 GND 64 I/O22 5 A14 15 I/O11 25 I/O13 35 I/O25 45 VCC 55 I/O19 65 I/O21 6 A15 16 A10 26 I/O12 36 I/O26 46 CE4 56 I/O31 66 I/O20 7 A16 17 A11 27 OE 37 A6 47 WE4 57 I/O30 8 NC 18 A12 28 NC 38 A7 48 I/O27 58 I/O29 9 I/O0 19 Vcc 29 WE1 39 NC 49 A3 59 I/O28 10 I/O1 20 CE1 30 I/O7 40 A8 50 A4 60 A0 Note: Pins 8, 21, 28, & 39 normally not connected, and can be connected to ground by specifing pinout Option "C". "P2" -- 1.185" SQ PGA Type Package Standard (with shoulders on Pins 1, 11, 56 & 66) "P6" -- 1.185" SQ PGA Type Special Order Package (without shoulders) Side View (P2) Bottom View (P2 & P6) Side View (P6) .245 MAX .025 .035 1.185 SQ .015 1.000 .600 .061 .051 .085 .075 Pin 56 .050 1.140 1.150 .100 Pin 1 1.140 1.150 .100 .020 .016 1.000 .020 .016 Pin 66 Pin 11 .180 TYP .155 .145 .100 .180 TYP .160 MAX "P7" -- 1.08" SQ PGA Type Package Standard (with shoulders on Pins 1, 11, 56 & 66) "P3" -- 1.08" SQ PGA Type Special Order Package (without shoulders) Bottom View (P7 & P3) Side View (P3) Side View (P7) .185 MAX .025 .035 .085 .075 1.085 SQ MAX 1.000 .600 .061 .051 Pin 56 .050 1.030 1.040 .100 Pin 1 1.030 1.040 .100 1.000 .020 .020 .016 .016 Pin 66 .180 TYP Aeroflex Circuit Technology Pin 11 .155 .145 .160 MAX .180 TYP 6 .100 SCD3359 REV A 10/3/97 Plainview NY (516) 694-6700 Pin Numbers & Functions 68 Pins -- Dual-Cavity CQFP Pin # Function Pin # Function Pin # Function Pin # Function 1 GND 18 GND 35 OE 52 GND 2 CE3 19 I/O8 36 CE2 53 I/O23 3 A5 20 I/O9 37 NC 54 I/O22 4 A4 21 I/O10 38 WE2 55 I/O21 5 A3 22 I/O11 39 WE3 56 I/O20 6 A2 23 I/O12 40 WE4 57 I/O19 7 A1 24 I/O13 41 NC 58 I/O18 8 A0 25 I/O14 42 NC 59 I/O17 9 NC 26 I/O15 43 NC 60 I/O16 10 I/O0 27 Vcc 44 I/O31 61 VCC 11 I/O1 28 A11 45 I/O30 62 A10 12 I/O2 29 A12 46 I/O29 63 A9 13 I/O3 30 A13 47 I/O28 64 A8 14 I/O4 31 A14 48 I/O27 65 A7 15 I/O5 32 A15 49 I/O26 66 A6 16 I/O6 33 A16 50 I/O25 67 WE1 17 I/O7 34 CE1 51 I/O24 68 CE4 Package Outline "F2" -- Dual-Cavity CQFP Top View Pin 9 0.990 SQ .010 0.880 SQ .010 Pin 10 (*0.180 MAX available, call factory for details) Pin 61 *0.200 MAX 0.010 REF Pin 60 0.015 .010 0.946 .010 0.010 R 3 -3 0.050 TYP 0.010 .005 0.040 Detail "A" Pin 26 Pin 27 Pin 44 0.800 REF Pin 43 See Detail "A" Note: Metallic lids and walls - both sides All dimensions in inches Aeroflex Circuit Technology 7 SCD3359 REV A 10/3/97 Plainview NY (516) 694-6700 DESC Ordering Information Model Number DESC Part Number Speed Package ACT-S128K32VN-017F2Q Pending 17ns .88"sq CQFP ACT-S128K32VN-020F2Q Pending 20ns .88"sq CQFP ACT-S128K32VN-025F2Q Pending 25ns .88"sq CQFP ACT-S128K32VN-035F2Q Pending 35ns .88"sq CQFP ACT-S128K32VN-045F2Q Pending 45ns .88"sq CQFP ACT-S128K32VN-055F2Q Pending 55ns .88"sq CQFP ACT-S128K32VN-017P2Q Pending 17ns 1.185"sq PGA-Type ACT-S128K32VN-020P2Q Pending 20ns 1.185"sq PGA-Type ACT-S128K32VN-025P2Q Pending 25ns 1.185"sq PGA-Type ACT-S128K32VN-035P2Q Pending 35ns 1.185"sq PGA-Type ACT-S128K32VN-045P2Q Pending 45ns 1.185"sq PGA-Type ACT-S128K32VN-055P2Q Pending 55ns 1.185"sq PGA-Type ACT-S128K32VC-017P2Q Pending 17ns 1.185"sq PGA-Type ACT-S128K32VC-020P2Q Pending 20ns 1.185"sq PGA-Type ACT-S128K32VC-025P2Q Pending 25ns 1.185"sq PGA-Type ACT-S128K32VC-035P2Q Pending 35ns 1.185"sq PGA-Type ACT-S128K32VC-045P2Q Pending 45ns 1.185"sq PGA-Type ACT-S128K32VC-055P2Q Pending 55ns 1.185"sq PGA-Type ACT-S128K32VN-017P7Q Pending 17ns 1.085"sq PGA-Type ACT-S128K32VN-020P7Q Pending 20ns 1.085"sq PGA-Type ACT-S128K32VN-025P7Q Pending 25ns 1.085"sq PGA-Type ACT-S128K32VN-035P7Q Pending 35ns 1.085"sq PGA-Type ACT-S128K32VN-045P7Q Pending 45ns 1.085"sq PGA-Type ACT-S128K32VN-055P7Q Pending 55ns 1.085"sq PGA-Type ACT-S128K32VC-017P7Q Pending 17ns 1.085"sq PGA-Type ACT-S128K32VC-020P7Q Pending 20ns 1.085"sq PGA-Type ACT-S128K32VC-025P7Q Pending 25ns 1.085"sq PGA-Type ACT-S128K32VC-035P7Q Pending 35ns 1.085"sq PGA-Type ACT-S128K32VC-045P7Q Pending 45ns 1.085"sq PGA-Type ACT-S128K32VC-055P7Q Pending 55ns 1.085"sq PGA-Type Aeroflex Circuit Technology 8 SCD3359 REV A 10/3/97 Plainview NY (516) 694-6700 CIRCUIT TECHNOLOGY Part Number Breakdown \\\ ACT- S 128K 32 V N- 020 F1 M Aeroflex Circuit Technology Memory Type Screening C = Commercial Temp, 0C to +70C I = Industrial Temp, -40C to +85C T = Military Temp, -55C to +125C M = Military Temp, -55C to +125C Screened * Q = MIL-PRF-38534 Compliant/SMD S = SRAM Memory Depth, Locations Memory Width, Bits Power Supply, +3.3V Package Types & Sizes Surface Mount Packages F2 = 0.88"SQ 68 Leads Dual-Cavity CQFP Pinout Options, (PGA Pkg's only) N = No internal connection - For unused Pins 8, 21, 28 & 30 C = Connect to GND Pins 8, 21, 28 & 30 Thru-Hole Packages P2 = 1.185"SQ PGA 66 Pins W/Shoulder (Consult Factory) P3 = 1.085"SQ PGA 66 Pins WO/Shoulder P6 = 1.185"SQ PGA 66 Pins WO/Shoulder (Consult Factory) P7 = 1.085"SQ PGA 66 Pins W/Shoulder Memory Speed, ns (+5V Vcc) * Screened to the individual test methods of MIL-STD-883 Specifications subject to change without notice Aeroflex Circuit Technology 35 South Service Road Plainview New York 11830 www.aeroflex.com/act1.htm Aeroflex Circuit Technology Telephone: (516) 694-6700 FAX: (516) 694-6715 Toll Free Inquiries: (800) 843-1553 E-Mail: sales-act@aeroflex.com 9 SCD3359 REV A 10/3/97 Plainview NY (516) 694-6700