NOT RECOMMENDED FOR NEW DESIGN PR1501G/S - PR1507G/S 1.5A FAST RECOVERY GLASS PASSIVATED RECTIFIER Features * * * * * Glass Passivated Die Construction Fast Switching for High Efficiency Surge Overload Rating to 50A Peak Low Reverse Leakage Current Lead Free Finish, RoHS Compliant (Note 4) Mechanical Data * * * * * * * * * * Case: DO-41, DO-15 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminals: Finish Tin. Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number Ordering Information: See Page 3 DO-41 Weight: 0.35 grams (approximate) DO-15 Weight: 0.40 grams (approximate) Dim A B C D DO-41 DO-15 Min Max Min Max 25.40 25.40 4.06 5.21 5.50 7.62 0.71 0.864 0.686 0.889 2.00 2.72 2.60 3.60 All Dimensions in mm "GS" Suffix Designates DO-41 Package "G" Suffix Designates DO-15 Package Maximum Ratings and Electrical Characteristics @TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage (Note 5) RMS Reverse Voltage Average Rectified Output Current @ TA = 55C (Note 1) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 1.5 A IFSM 50 A @ IF = 1.5A VFM 1.3 V @ TA = 25C @ TA = 100C IRM 5.0 200 A Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage (Note 5) PR1501 PR1502 PR1503 PR1504 PR1505 PR1506 PR1507 Unit G/GS G/GS G/GS G/GS G/GS G/GS G/GS Reverse Recovery Time (Note 3) trr Typical Total Capacitance (Note 2) CT 25 pF RJA 65 C/W Tj, TSTG -65 to +150 C Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: 1. 2. 3. 4. 5. 150 250 500 ns Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.2 5A. See figure 5. RHS revision 13.2.2003. Glass and high temperature solder exemptions applied, see EU Directive Annex Notes 5 and 7. Short duration pulse test used to minimize self-heating effect. DS27004 Rev. 6 - 3 1 of 3 www.diodes.com PR1501G/S - PR1507G/S (c) Diodes Incorporated IF, INSTANTANEOUS FORWARD CURRENT (A) IF, AVERAGE FORWARD RECTIFIED CURRENT (A) NOT RECOMMENDED FOR NEW DESIGN 2.0 1.6 1.2 0.8 0.4 Single phase half-wave 60Hz resistive or inductive load 0 25 50 75 100 125 150 175 200 10 1.0 0.1 0.01 0.6 1.0 1.2 1.4 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics TA, AMBIENT TEMPERATURE (C) Fig. 1 Forward Derating Curve 60 100 CT, TOTAL CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 0.8 40 20 T j = 25 C f = 1.0MHz 10 1 0 1 DS27004 Rev. 6 - 3 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current 1 100 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance 2 of 3 www.diodes.com PR1501G/S - PR1507G/S (c) Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGN Ordering Information (Note 6) Device PR1501G-B PR1501G-T PR1502G-B PR1502G-T PR1503G-B PR1503G-T PR1504G-B PR1504G-T PR1505G-B PR1505G-T PR1506G-B PR1506G-T PR1507G-B PR1507G-T PR1501GS-A PR1501GS-B PR1501GS-T PR1502GS-A PR1502GS-B PR1502GS-T PR1503GS-A PR1503GS-B PR1503GS-T PR1504GS-A PR1504GS-B PR1504GS-T PR1505GS-A PR1505GS-B PR1505GS-T PR1506GS-A PR1506GS-B PR1506GS-T PR1507GS-A PR1507GS-B PR1507GS-T Notes: Packaging DO-15 DO-15 DO-15 DO-15 DO-15 DO-15 DO-15 DO-15 DO-15 DO-15 DO-15 DO-15 DO-15 DO-15 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 DO-41 Shipping 1K/Bulk 4K/Tape & Reel, 13-inch 1K/Bulk 4K/Tape & Reel, 13-inch 1K/Bulk 4K/Tape & Reel, 13-inch 1K/Bulk 4K/Tape & Reel, 13-inch 1K/Bulk 4K/Tape & Reel, 13-inch 1K/Bulk 4K/Tape & Reel, 13-inch 1K/Bulk 4K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 5K/Ammo Pack 1K/Bulk 5K/Tape & Reel, 13-inch 6. For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf. DS27004 Rev. 6 - 3 3 of 3 www.diodes.com PR1501G/S - PR1507G/S (c) Diodes Incorporated NOT RECOMMENDED FOR NEW DESIGN IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2010, Diodes Incorporated www.diodes.com DS27004 Rev. 6 - 3 4 of 3 www.diodes.com PR1501G/S - PR1507G/S (c) Diodes Incorporated