Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 10
Device No. : DSE-0000738 Prepared date: 14-Jan-2009 Prepared by: Betty Lin
Technical Data Sheet
Reverse Package Chip LED
23-215A/BHC-DN2P2E/5A
Features
․Package in 8mm tape on 13〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Mono-color type.
․Pb-Free.
․The product itself will remain within RoHS
compliant version.
Descriptions
․The 23-215A SMD LED is much smaller than
`lead frame type components, thus enable smaller
board size, higher packing density, reduced
storage space and finally smaller equipment to be
obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide Chip
Part No. Material Emitted Color Resin Color
23-215A/BHC-DN2P2E/5A InGaN Blue Water Clear
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 11
Device No. : DSE-0000738 Prepared date: 14-Jan-2009 Prepared by: Betty Lin
23-215A/BHC-DN2P2E/5A
Package Outline Dimensions
2.0
3.2
Cathode Mark
0.6 2.0 0.6
0.2
0.6 0.8
2.4
1.0 1.0
0.8
Note: The tolerances unless mentioned is ±0.1mm,Unit = mm
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 11
Device No. : DSE-0000738 Prepared date: 14-Jan-2009 Prepared by: Betty Lin
23-215A/BHC-DN2P2E/5A
Absolute Maximum Ratings (Ta=25℃)
Parameter Symbol Rating Unit
Reverse Voltage VR 5 V
Forward Current IF 25 mA
Peak Forward Current
(Duty 1/10 @1KHz) IFP 100 mA
Power Dissipation Pd 95 mW
Electrostatic Discharge(HBM) ESD 150 V
Operating Temperature Topr -40 ~ +85 ℃
Storage Temperature Tstg -40 ~ +90 ℃
Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 11
Device No. : DSE-0000738 Prepared date: 14-Jan-2009 Prepared by: Betty Lin
23-215A/BHC-DN2P2E/5A
Electro-Optical Characteristics (Ta=25℃)
Parameter Symbol Min. Typ. Max. Unit Condition
Luminous Intensity Iv 36 ---- 72 mcd
Viewing Angle 2θ1/2 ---- 130 ---- deg
Peak Wavelength λp ---- 468 ---- nm
Dominant
Wavelength λd 466 ---- 472 nm
Spectrum Radiation
Bandwidth △λ ---- 25 ---- nm
Forward Voltage VF 2.75 ---- 3.65 V
IF=20mA
Reverse Current IR ---- ---- 50
μA VR=5V
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.1V
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 11
Device No. : DSE-0000738 Prepared date: 14-Jan-2009 Prepared by: Betty Lin
23-215A/BHC-DN2P2E/5A
Bin Range Of Luminous Intensity
Bin Min Max Unit Condition
N2 36 45
P1 45 57
P2 57 72
mcd IF=20mA
Bin Range Of Dom. Wavelength
Group Bin Min Max Unit Condition
AA2 466 468
AA3 468 470
D
AA4 470 472
nm IF=20mA
Bin Range Of Forward Voltage
Group Bin Min Max Unit Condition
5 2.75 3.05
6 3.05 3.35
E
7 3.35 3.65
V IF=20mA
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Dominant Wavelength ±1nm
3.Tolerance of Forward Voltage ±0.1V
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 11
Device No. : DSE-0000738 Prepared date: 14-Jan-2009 Prepared by: Betty Lin
23-215A/BHC-DN2P2E/5A
Typical Electro-Optical Characteristics Curves
25
0
50
75
100 Ta=25°C
Forward Voltage V (V)
Relative luminous intensity (%)
-60
Forward Current Derating Curve
Ambient Temperature Ta (°C)
Forward Current F
I (mA)
1
10
-20-40 0 20 60
40 10080
Relative luminous intensity (%)
100
1000
Forward Current
Wavelength λ (nm)
Luminous Intensity vs.
Ambient Temperature
I (mA)
F
Spectrum Distribution Forward Voltage
F
Ta=25°C
Forward Current vs.
10
Relative luminous intensity (%)
1
10
100
Forward Current I (mA)
10 10
F
Ta=25°C
Luminous Intensity vs.
Forward Current
30°
20°
Ta=25°C
10°0°
Radiation Diagram
40°
60°
50°
90°
80°
0.6
70°
0.20.10.5 0.3 0.4
1.0
0.8
0.9
0.7
Ambient Temperature Ta (°C)
400 550
450 500 600 2.6
0
10
25
20
40
30
50
4.23.43.0 3.8 4.5
1000
Duty=1/10
f=1KHz
12
0
10
0
20
30
25
40
50
40
20 60 10085
20°10°0°
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 11
Device No. : DSE-0000738 Prepared date: 14-Jan-2009 Prepared by: Betty Lin
23-215A/BHC-DN2P2E/5A
Label Explanation
CAT: Luminous Intensity Rank
HUE: Dom. Wavelength Rank
REF: Forward Voltage Rank
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
RoHS
Pb
CPN :
PN : XXXXXXXXXXXXX
XXXXXXXXXXXXX
QTY : XXX
LOT NO : XXXXXXXXXX
Reference : XXXXXXXX
CAT : XXX
HUE : XXX
REF : XXX
EVERLIGHT
MADE IN TAIWAN
MSL-2
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 11
Device No. : DSE-0000738 Prepared date: 14-Jan-2009 Prepared by: Betty Lin
23-215A/BHC-DN2P2E/5A
Carrier Tape Dimensions: Loaded quantity 5000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Moisture Resistant Packaging
Label Desiccant Label
Aluminum moisture-proof bag
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 11
Device No. : DSE-0000738 Prepared date: 14-Jan-2009 Prepared by: Betty Lin
23-215A/BHC-DN2P2E/5A
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level：90%
LTPD：10%
No. Items Test Condition
Test
Hours/Cycles Sample
Size Ac/Re
1 Reflow Soldering
Temp. : 260℃±5℃
Min. 5sec. 6 Min. 22 PCS. 0/1
2 Temperature Cycle
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
300 Cycles 22 PCS. 0/1
3 Thermal Shock
H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
300 Cycles 22 PCS. 0/1
4 High Temperature
Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1
5 Low Temperature
Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1
6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1
7 High Temperature /
High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 11
Device No. : DSE-0000738 Prepared date: 14-Jan-2009 Prepared by: Betty Lin
23-215A/BHC-DN2P2E/5A
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 11 of 11
Device No. : DSE-0000738 Prepared date: 14-Jan-2009 Prepared by: Betty Lin
23-215A/BHC-DN2P2E/5A
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of
the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable,
a double-head soldering iron should be used (as below figure). It should be confirmed beforehand
whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com
