935263006125 - NXP SEMICONDUCTORS

1. General description

74AHC1G86 and 74AHCT1G86 are high-speed Si-gate CMOS devices. They provide a

2-input EXCLUSIVE-OR function.

The AHC device has CMOS input switching levels and supply voltage range 2 V to 5.5 V.

The AHCT device has TTL input switching levels and supply voltage range 4.5 V to 5.5 V.

2. Features

nSymmetrical output impedance

nHigh noise immunity

nESD protection:

uHBM JESD22-A114E: exceeds 2000 V

uMM JESD22-A115-A: exceeds 200 V

uCDM JESD22-C101C: exceeds 1000 V

nLow power dissipation

nBalanced propagation delays

nSOT353-1 and SOT753 package options

nSpeciﬁed from −40 °C to +125 °C

3. Ordering information

74AHC1G86; 74AHCT1G86

2-input EXCLUSIVE-OR gate

Rev. 05 — 4 July 2007 Product data sheet

Table 1. Ordering information

Type number Package

Temperature range Name Description Version

74AHC1G86GW −40 °C to +125 °C TSSOP5 plastic thin shrink small outline package; 5 leads;

body width 1.25 mm SOT353-1

74AHCT1G86GW

74AHC1G86GV −40 °C to +125 °C SC-74A plastic surface-mounted package; 5 leads SOT753

74AHCT1G86GV

74AHC_AHCT1G86_5

Product data sheet Rev. 05 — 4 July 2007 2 of 12

Nexperia 74AHC1G86; 74AHCT1G86

2-input EXCLUSIVE-OR gate

4. Marking

5. Functional diagram

6. Pinning information

6.1 Pinning

Table 2. Marking codes

Type number Marking code

74AHC1G86GW AH

74AHCT1G86GW CH

74AHC1G86GV A86

74AHCT1G86GV C86

Fig 1. Logic symbol Fig 2. IEC logic symbol

mna038

141

2= 1 4

mna039

Fig 3. Logic diagram

mna040

Fig 4. Pin conﬁguration

74AHC1G86

GND Y

001aaf054

74AHC_AHCT1G86_5

Product data sheet Rev. 05 — 4 July 2007 3 of 12

Nexperia 74AHC1G86; 74AHCT1G86

2-input EXCLUSIVE-OR gate

6.2 Pin description

7. Functional description

8. Limiting values

[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

[2] For both TSSOP5 and SC-74A packages: above 87.5 °C the value of Ptot derates linearly with 4.0 mW/K.

Table 3. Pin description

Symbol Pin Description

B 1 data input

A 2 data input

GND 3 ground (0 V)

Y 4 data output

VCC 5 supply voltage

Table 4. Function table

H = HIGH voltage level; L = LOW voltage level

Inputs Output

ABY

LLL

LHH

HLH

HHL

Table 5. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).

Symbol Parameter Conditions Min Max Unit

VCC supply voltage −0.5 +7.0 V

VIinput voltage −0.5 +7.0 V

IIK input clamping current VI < −0.5 V −20 - mA

IOK output clamping current VO < −0.5 V or VO>V

CC + 0.5 V [1] -±20 mA

IOoutput current −0.5 V < VO <V

CC + 0.5 V - ±25 mA

ICC supply current - 75 mA

IGND ground current −75 - mA

Tstg storage temperature −65 +150 °C

Ptot total power dissipation Tamb = −40 °C to +125 °C[2] - 250 mW

74AHC_AHCT1G86_5

Product data sheet Rev. 05 — 4 July 2007 4 of 12

Nexperia 74AHC1G86; 74AHCT1G86

2-input EXCLUSIVE-OR gate

9. Recommended operating conditions

10. Static characteristics

Table 6. Recommended operating conditions

Voltages are referenced to GND (ground = 0 V).

Symbol Parameter Conditions 74AHC1G86 74AHCT1G86 Unit

Min Typ Max Min Typ Max

VCC supply voltage 2.0 5.0 5.5 4.5 5.0 5.5 V

VIinput voltage 0 - 5.5 0 - 5.5 V

VOoutput voltage 0 - VCC 0-V

CC V

Tamb ambient temperature −40 +25 +125 −40 +25 +125 °C

∆t/∆V input transition rise

and fall rate VCC = 3.3 V ± 0.3 V - - 100 - - - ns/V

VCC = 5.0 V ± 0.5 V - - 20 - - 20 ns/V

Table 7. Static characteristics

Voltages are referenced to GND (ground = 0 V).

Symbol Parameter Conditions 25 °C−40 °C to +85 °C−40 °C to +125 °C Unit

Min Typ Max Min Max Min Max

For type 74AHC1G86

VIH HIGH-level

input voltage VCC = 2.0 V 1.5 - - 1.5 - 1.5 - V

VCC = 3.0 V 2.1 - - 2.1 - 2.1 - V

VCC = 5.5 V 3.85 - - 3.85 - 3.85 - V

VIL LOW-level

input voltage VCC = 2.0 V - - 0.5 - 0.5 - 0.5 V

VCC = 3.0 V - - 0.9 - 0.9 - 0.9 V

VCC = 5.5 V - - 1.65 - 1.65 - 1.65 V

VOH HIGH-level

output voltage VI= VIH or VIL

IO=−50 µA; VCC = 2.0 V 1.9 2.0 - 1.9 - 1.9 - V

IO=−50 µA; VCC = 3.0 V 2.9 3.0 - 2.9 - 2.9 - V

IO=−50 µA; VCC = 4.5 V 4.4 4.5 - 4.4 - 4.4 - V

IO=−4.0 mA; VCC = 3.0 V 2.58 - - 2.48 - 2.40 - V

IO=−8.0 mA; VCC = 4.5 V 3.94 - - 3.8 - 3.70 - V

VOL LOW-level

output voltage VI= VIH or VIL

IO= 50 µA; VCC = 2.0 V - 0 0.1 - 0.1 - 0.1 V

IO= 50 µA; VCC = 3.0 V - 0 0.1 - 0.1 - 0.1 V

IO= 50 µA; VCC = 4.5 V - 0 0.1 - 0.1 - 0.1 V

IO= 4.0 mA; VCC = 3.0 V - - 0.36 - 0.44 - 0.55 V

IO= 8.0 mA; VCC = 4.5 V - - 0.36 - 0.44 - 0.55 V

IIinput leakage

current VI= 5.5 Vor GND;

VCC = 0 V to 5.5 V - - 0.1 - 1.0 - 2.0 µA

ICC supply current VI=V

CC or GND; IO = 0 A;

VCC = 5.5 V - - 1.0 - 10 - 40 µA

CIinput

capacitance - 1.5 10 - 10 - 10 pF

74AHC_AHCT1G86_5

Product data sheet Rev. 05 — 4 July 2007 5 of 12

Nexperia 74AHC1G86; 74AHCT1G86

2-input EXCLUSIVE-OR gate

11. Dynamic characteristics

For type 74AHCT1G86

VIH HIGH-level

input voltage VCC = 4.5 V to 5.5 V 2.0 - - 2.0 - 2.0 - V

VIL LOW-level

input voltage VCC = 4.5 V to 5.5 V - - 0.8 - 0.8 - 0.8 V

VOH HIGH-level

output voltage VI= VIH or VIL; VCC = 4.5 V

IO=−50 µA 4.4 4.5 - 4.4 - 4.4 - V

IO=−8.0 mA 3.94 - - 3.8 - 3.70 - V

VOL LOW-level

output voltage VI= VIH or VIL; VCC = 4.5 V

IO= 50 µA - 0 0.1 - 0.1 - 0.1 V

IO= 8.0 mA - - 0.36 - 0.44 - 0.55 V

IIinput leakage

current VI= 5.5 Vor GND;

VCC = 0 V to 5.5 V - - 0.1 - 1.0 - 2.0 µA

ICC supply current VI=V

CC or GND; IO = 0 A;

VCC = 5.5 V - - 1.0 - 10 - 40 µA

∆ICC additional

supply current per input pin; VI= 3.4 V;

other inputs at VCC or GND;

IO= 0 A; VCC = 5.5 V

- - 1.35 - 1.5 - 1.5 mA

CIinput

capacitance - 1.5 10 - 10 - 10 pF

Table 7. Static characteristics

…continued

Voltages are referenced to GND (ground = 0 V).

Symbol Parameter Conditions 25 °C−40 °C to +85 °C−40 °C to +125 °C Unit

Min Typ Max Min Max Min Max

Table 8. Dynamic characteristics

GND = 0 V; t

= t

≤

3.0 ns. For waveform see Figure 5. For test circuit see Figure 6.

Symbol Parameter Conditions 25 °C−40 °C to +85 °C−40 °C to +125 °C Unit

Min Typ Max Min Max Min Max

For type 74AHC1G86

tpd propagation

delay A and B to Y [1]

VCC = 3.0 V to 3.6 V [2]

CL= 15 pF - 4.0 11.0 1.0 13.0 1.0 14.0 ns

CL= 50 pF - 5.8 14.5 1.0 16.5 1.0 18.5 ns

VCC = 4.5 V to 5.5 V [3]

CL= 15 pF - 3.4 6.8 1.0 8.0 1.0 8.5 ns

CL= 50 pF - 4.9 8.8 1.0 10.0 1.0 11.5 ns

CPD power

dissipation

capacitance

per buffer;

CL=50pF;f=1 MHz;

VI= GND to VCC

[4] -9- - - - -pF

74AHC_AHCT1G86_5

Product data sheet Rev. 05 — 4 July 2007 6 of 12

Nexperia 74AHC1G86; 74AHCT1G86

2-input EXCLUSIVE-OR gate

[1] tpd is the same as tPLH and tPHL.

[2] Typical values are measured at VCC = 3.3 V.

[3] Typical values are measured at VCC = 5.0 V.

[4] CPD is used to determine the dynamic power dissipation PD(µW).

PD=C

PD ×VCC2×fi+∑(CL×VCC2×fo) where:

fi= input frequency in MHz;

fo= output frequency in MHz;

CL= output load capacitance in pF;

VCC = supply voltage in Volts.

12. Waveforms

For type 74AHCT1G86

tpd propagation

delay A and B to Y [1]

VCC = 4.5 V to 5.5 V [3]

CL= 15 pF - 3.5 6.9 1.0 8.0 1.0 9.0 ns

CL= 50 pF - 5.0 7.9 1.0 9.0 1.0 10.5 ns

CPD power

dissipation

capacitance

per buffer;

CL=50pF;f=1 MHz;

VI= GND to VCC

[4] -11- - - - - pF

Table 8. Dynamic characteristics

…continued

GND = 0 V; t

= t

≤

3.0 ns. For waveform see Figure 5. For test circuit see Figure 6.

Symbol Parameter Conditions 25 °C−40 °C to +85 °C−40 °C to +125 °C Unit

Min Typ Max Min Max Min Max

Measurement points are given in Table 9.

Fig 5. The input (A and B) to output (Y) propagation delays

mna041

tPHL tPLH

A, B input

Y output

Table 9. Measurement points

Type Input Output

VIVMVM

74AHC1G86 GND to VCC 0.5 ×VCC 0.5 ×VCC

74AHCT1G86 GND to 3.0 V 1.5 V 0.5 ×VCC

74AHC_AHCT1G86_5

Product data sheet Rev. 05 — 4 July 2007 7 of 12

Nexperia 74AHC1G86; 74AHCT1G86

2-input EXCLUSIVE-OR gate

Test data is given in Table 8. Deﬁnitions for test circuit:

CL = load capacitance including jig and probe capacitance.

RT = termination resistance should be equal to the output impedance Zo of the pulse generator.

Fig 6. Load circuitry for switching times

VCC

VIVO

mna034

DUT

50 pF

PULSE

GENERATOR

74AHC_AHCT1G86_5

Product data sheet Rev. 05 — 4 July 2007 8 of 12

Nexperia 74AHC1G86; 74AHCT1G86

2-input EXCLUSIVE-OR gate

13. Package outline

Fig 7. Package outline SOT353-1 (TSSOP5)

UNIT A1

max. A2A3bpLHELpwyv

ceD(1) E(1) Z(1) θ

REFERENCES

OUTLINE

VERSION EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

mm 0.1

01.0

0.8 0.30

0.15 0.25

0.08 2.25

1.85 1.35

1.15 0.65

1.3 2.25

2.0 0.60

0.15 7°

0°

0.1 0.10.30.425

DIMENSIONS (mm are the original dimensions)

Note

1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.

0.46

0.21

SOT353-1 MO-203 SC-88A 00-09-01

03-02-19

0.15

(A3)

detail X

vMA

1.5 3 mm0

scale

TSSOP5: plastic thin shrink small outline package; 5 leads; body width 1.25 mm SOT353-1

1.1

74AHC_AHCT1G86_5

Product data sheet Rev. 05 — 4 July 2007 9 of 12

Nexperia 74AHC1G86; 74AHCT1G86

2-input EXCLUSIVE-OR gate

Fig 8. Package outline SOT753 (SC-74A)

REFERENCES

OUTLINE

VERSION EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

SOT753 SC-74A

wBM

detail X

vMA

0 1 2 mm

scale

132

Plastic surface-mounted package; 5 leads SOT753

UNIT A1bpcDEHELpQywv

mm 0.100

0.013 0.40

0.25 3.1

2.7

0.26

0.10 1.7

1.3

0.95 3.0

2.5 0.2 0.10.2

DIMENSIONS (mm are the original dimensions)

0.6

0.2 0.33

0.23

1.1

0.9

02-04-16

06-03-16

74AHC_AHCT1G86_5

Product data sheet Rev. 05 — 4 July 2007 10 of 12

Nexperia 74AHC1G86; 74AHCT1G86

2-input EXCLUSIVE-OR gate

14. Abbreviations

15. Revision history

Table 10. Abbreviations

Acronym Description

CDM Charged Device Model

DUT Device Under Test

ESD ElectroStatic Discharge

HBM Human Body Model

MM Machine Model

TTL Transistor-Transistor Logic

Table 11. Revision history

Document ID Release date Data sheet status Change notice Supersedes

74AHC_AHCT1G86_5 20070704 Product data sheet - 74AHC_AHCT1G86_4

Modiﬁcations: •The format of this data sheet has been redesigned to comply with the new identity

guidelines of NXP Semiconductors

•Legal texts have been adapted to the new company name where appropriate.

•Package SOT353 changed to SOT353-1 in Section 3 and Section 13.

•Quick reference data and Soldering sections removed.

74AHC_AHCT1G86_4 20020606 Product speciﬁcation - 74AHC_AHCT1G86_3

74AHC_AHCT1G86_3 20020218 Product speciﬁcation - 74AHC_AHCT1G86_2

74AHC_AHCT1G86_2 20010406 Product speciﬁcation - 74AHC1G_AHCT1G86_1

74AHC1G_AHCT1G86_1 19990920 Product speciﬁcation - -

74AHC_AHCT1G86_5

Product data sheet Rev. 05 — 4 July 2007 11 of 12

Nexperia 74AHC1G86; 74AHCT1G86

2-input EXCLUSIVE-OR gate

16. Legal information

16.1 Data sheet status

[1] Please consult the most recently issued document before initiating or completing a design.

[2] The term ‘short data sheet’ is explained in section “Deﬁnitions”.

[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status

information is available on the Internet at URL http://www.nexperia.com.

16.2 Deﬁnitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modiﬁcations or additions. Nexperia does not give any

representations or warranties as to the accuracy or completeness of

information included herein and shall have no liability for the consequences of

use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is intended

for quick reference only and should not be relied upon to contain detailed and

full information. For detailed and full information see the relevant full data

sheet, which is available on request via the local Nexperia sales

ofﬁce. In case of any inconsistency or conﬂict with the short data sheet, the

full data sheet shall prevail.

16.3 Disclaimers

General — Information in this document is believed to be accurate and

reliable.However,Nexperiadoesnotgiveanyrepresentationsor

warranties, expressed or implied, as to the accuracy or completeness of such

information and shall have no liability for the consequences of use of such

information.

Right to make changes — Nexperiareservestherighttomake

changes to information published in this document, including without

limitation speciﬁcations and product descriptions, at any time and without

notice. This document supersedes and replaces all information supplied prior

to the publication hereof.

Suitability for use — Nexperia products are not designed,

authorized or warranted to be suitable for use in medical, military, aircraft,

space or life support equipment, nor in applications where failure or

malfunctionofaNexperiaproductcanreasonablybeexpectedto

result in personal injury, death or severe property or environmental damage.

Nexperia accepts no liability for inclusion and/or use of Nexperia

products in such equipment or applications and therefore

such inclusion and/or use is at the customer’s own risk.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. Nexperia makes no

representation or warranty that such applications will be suitable for the

speciﬁed use without further testing or modiﬁcation.

Limiting values — Stress above one or more limiting values (as deﬁned in

the Absolute Maximum Ratings System of IEC 60134) may cause permanent

damage to the device. Limiting values are stress ratings only and operation of

the device at these or any other conditions above those given in the

Characteristics sections of this document is not implied. Exposure to limiting

values for extended periods may affect device reliability.

Terms and conditions of sale — Nexperia products are sold

subject to the general terms and conditions of commercial sale, as published

at http://www.nexperia.com/proﬁle/terms, including those pertaining to warranty,

intellectual property rights infringement and limitation of liability, unless

explicitly otherwise agreed to in writing by Nexperia. In case of

any inconsistency or conﬂict between information in this document and such

terms and conditions, the latter will prevail.

No offer to sell or license — Nothing in this document may be interpreted

or construed as an offer to sell products that is open for acceptance or the

grant, conveyance or implication of any license under any copyrights, patents

or other industrial or intellectual property rights.

16.4 Trademarks

Notice: All referenced brands, product names, service names and trademarks

are the property of their respective owners.

17. Contact information

For additional information, please visit: http://www.nexperia.com

For sales ofﬁce addresses, send an email to: salesaddresses@nexperia.com

Document status[1][2] Product status[3] Deﬁnition

Objective [short] data sheet Development This document contains data from the objective speciﬁcation for product development.

Preliminary [short] data sheet Qualiﬁcation This document contains data from the preliminary speciﬁcation.

Product [short] data sheet Production This document contains the product speciﬁcation.

Nexperia 74AHC1G86; 74AHCT1G86

2-input EXCLUSIVE-OR gate

18. Contents

1 General description. . . . . . . . . . . . . . . . . . . . . . 1

2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

3 Ordering information. . . . . . . . . . . . . . . . . . . . . 1

4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

5 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2

6 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2

6.1 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

6.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 3

7 Functional description . . . . . . . . . . . . . . . . . . . 3

8 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3

9 Recommended operating conditions. . . . . . . . 4

10 Static characteristics. . . . . . . . . . . . . . . . . . . . . 4

11 Dynamic characteristics . . . . . . . . . . . . . . . . . . 5

12 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

13 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8

14 Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . 10

15 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 10

16 Legal information. . . . . . . . . . . . . . . . . . . . . . . 11

16.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 11

16.2 Deﬁnitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

16.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 11

16.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 11

17 Contact information. . . . . . . . . . . . . . . . . . . . . 11

18 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

For more information, please visit: http://www.nexperia.com

For sales office addresses, please send an email to: salesaddresses@nexperia.com

Date of release:

04 July 2007