Axial Aluminum Electrolytic Capacitors PEG127 Series, +150C Overview Applications KEMET's PEG127 is an electrolytic capacitor with outstanding electrical performance. The device has a polarized all-welded design, tinned copper wire leads, a negative pole connected to the case, and plastic insulation. The PEG127 winding is housed in a cylindrical aluminum can with a high purity aluminum lid and high quality rubber gasket, as well as high temperature capability in small case sizes. The PEG127 has 1,600 hours operational life at +150C for all case sizes. KEMET's PEG127 is a high performance axial electrolytic capacitor. It is designed for automotive applications with high demands on resistance to vibrations and high ambient temperature. Benefits * 1,600 hours at +150C * High ripple capability Part Number System PEG127 H A 318 0 Q T1 Series Voltage (VDC) Size Code Capacitance Code (F) Version Capacitance Tolerance Packaging See Dimension Table The second two digits indicate the two most significant digits of the capacitance value. The first digit indicates the total number digits. 0 = Standard Q = -10 +30% Axial Aluminum Electrolytic H = 25 K = 40 M = 63 See Ordering Options Table One world. One KEMET (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com A4013_PEG127 * 7/17/2013 1 Axial Aluminum Electrolytic Capacitors - PEG127, +150C Performance Characteristics Item Performance Characteristics Capacitance Range Rated Voltage Temperature Range Capacitance Tolerance Shelf Life Leakage Current Vibration Test Specifications Standards 33 - 1,300 F 25 - 63 VDC -40 to +150C -10/+30% at 100 Hz/+20C 5,000 hours at +105C or 10 years at +40C 0 VDC I = 0.003 CV + 4,000 (A) C = rated capacitance (F), V = rated voltage (VDC). Voltage applied for 5 minutes at +20C. Procedure Requirements 1.5 mm displacement amplitude or 20 g maximum acceleration. Vibration applied for three 2-hour sessions at 10 - 2,000 Hz (capacitor clamped by body). No leakage of electrolyte or other visible damage. Deviations in capacitance and tan from initial measurements must not exceed: C/C < 5% IEC 60384-4 long life grade 40/125/56, AEC-Q200 Compensation Factor of Ripple Current (RC) vs. Frequency Frequency 100 Hz 300 Hz 1 kHz 5 kHz 100 kHz Coefficient 0.35 0.57 0.80 1.00 1.04 Compensation Factor of ESR (5 kHz,+125 C) vs. Frequency Frequency 300 Hz 1 kHz 5 kHz 100 kHz Coefficient 8.00 3.00 1.5 1 Compensation Factor of ESR (5 kHz,+125 C) vs. Temperature Frequency -10C 60C 105C 125C Coefficient 5.00 1.50 1.1 1 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com A4013_PEG127 * 7/17/2013 2 Axial Aluminum Electrolytic Capacitors - PEG127, +150C Test Method & Performance Endurance Life Test Conditions Performance Temperature +150C Test Duration 1,600 hours Ripple Current Maximum ripple current specified in table Voltage The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor Performance The following specifications will be satisfied when the capacitor is tested at +20C: Capacitance Change Within 15% of the initial value Equivalent Series Resistance Does not exceed 200% of the initial value Leakage Current Does not exceed leakage current limit Ordering Options Table Packaging Kind Lead Length (mm) Lead and Packaging Code Standard Packaging Options Bulk (bag) 42 +3/-2 (Blank) Tape & Reel See Dimension Table T1 Dimensions - Millimeters LL LL "+" polarity indicator d Length to Lead Bend Size Code D 0.5 Dimensions in mm L L1 1 Minimum 0.03 d Bulk LL +3/-2 Taped LL +3/-2 A 10 20.0 26.0 0.8 42 31 B 10 29.0 35.0 0.8 42 27 C 13 20.0 26.0 0.8 42 31 D 13 29.0 35.0 0.8 42 27 E 13 37.0 43.0 0.8 42 24 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com A4013_PEG127 * 7/17/2013 3 Axial Aluminum Electrolytic Capacitors - PEG127, +150C Shelf Life The capacitance, ESR and impedance of a capacitor will not change significantly after extended storage periods, however the leakage current will very slowly increase. KEMET products are particularly stable and allow a shelf life in excess of three years at 40C. See sectional specification under each product series for specific data. Re-age (Reforming) Procedure Apply the rated voltage to the capacitor at room temperature for a period of one hour, or until the leakage current has fallen to a steady value below the specified limit. During re-aging a maximum charging current of twice the specified leakage current or 5 mA (whichever is greater) is suggested. Reliability The reliability of a component can be defined as the probability that it will perform satisfactorily under a given set of conditions for a given length of time. In practice, it is impossible to predict with absolute certainty how any individual component will perform; thus, we must utilize probability theory. It is also necessary to clearly define the level of stress involved (e.g. operating voltage, ripple current, temperature and time). Finally, the meaning of satisfactory performance must be defined by specifying a set of conditions which determine the end of life of the component. Reliability as a function of time, R(t), is normally expressed as: R(t)=e-t where R(t) is the probability that the component will perform satisfactorily for time t, and is the failure rate. Failure Rate The failure rate is the number of components failing per unit time. The failure rate of most electronic components follows the characteristic pattern: * Early failures are removed during the manufacturing process. * The operational life is characterized by a constant failure rate. * The wear out period is characterized by a rapidly increasing failure rate. The failures in time (FIT) are given with a 60% confidence level for the various type codes. By convention, FIT is expressed as 1 x 10-9 failures per hour. Failure rate is also expressed as a percentage of failures per 1,000 hours. e.g., 100FIT = 1 x 10-7 failures per hour = 0.01%/1,000 hours End of Life Definition Catastrophic Failure: short circuit, open circuit or safety vent operation Parametric Failure: * Change in capacitance > 10% * Leakage current > specified limit * ESR > 2 x initial ESR value (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com A4013_PEG127 * 7/17/2013 4 Axial Aluminum Electrolytic Capacitors - PEG127, +150C Failure Rate cont'd MTBF The mean time between failures (MTBF) is simply the inverse of the failure rate. MTBF= 1/ Failure Rate early failures wear out operational life Time Estimated field failure rate: 0.15 ppm (failures per year/produced number of capacitors per year) The expected failure rate for this capacitor range is based on field experience for capacitors with structural similarity. Environmental Compliance As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental effects of both our capacitors and their production. In Europe (RoHS Directive) and in some other geographical areas like China, legislation has been put in place to prevent the use of some hazardous materials, such as lead (Pb), in electronic equipment. All products in this catalog are produced to help our customers' obligations to guarantee their products and fulfill these legislative requirements. The only material of concern in our products has been lead (Pb), which has been removed from all designs to fulfill the requirement of containing less than 0.1% of lead in any homogeneous material. KEMET will closely follow any changes in legislation world wide and makes any necessary changes in its products, whenever needed. Some customer segments such as medical, military and automotive electronics may still require the use of lead in electrode coatings. To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for RoHS compatible capacitors. Because of customer requirements, there may appear additional markings such as LF = Lead Free or LFW = Lead Free Wires on the label. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com A4013_PEG127 * 7/17/2013 5 Axial Aluminum Electrolytic Capacitors - PEG127, +150C Table 1 - Ratings & Part Number Reference VDC Rated Capacitance 100 Hz 20C (F) 180 360 470 900 1300 110 220 270 520 750 33 68 80 160 230 25 25 25 25 25 40 40 40 40 40 63 63 63 63 63 VDC Rated Capacitance Size Code Case Size D x L (mm) A B C D E A B C D E A B C D E 10 x 20 10 x 29 13 x 20 13 x 29 13 x 37 10 x 20 10 x 29 13 x 20 13 x 29 13 x 37 10 x 20 10 x 29 13 x 20 13 x 29 13 x 37 Size Code Case Size Ripple Current Maximum 5 kHz 100C (A) 2.4 3.5 3.8 5.6 6.6 2.3 3.4 3.7 5.4 6.5 1.6 2.4 2.7 4.0 4.9 5 kHz 125C (A) 1.7 2.5 2.8 4.0 4.8 1.7 2.5 2.7 3.9 4.7 1.1 1.7 1.9 2.9 3.5 5 kHz 140C (A) 1.1 1.6 1.8 2.6 3.0 1.1 1.6 1.7 2.5 3.0 0.7 1.1 1.2 1.8 2.2 5 kHz 150C (A) 0.49 0.71 0.79 1.15 1.35 0.48 0.70 0.77 1.11 1.32 0.32 0.49 0.55 0.83 1.00 ESR Maximum 100 Hz 20C (m) 560 281 226 118 85 710 360 301 157 110 1700 825 704 354 250 Ripple Current 100 kHz 20C (m) 255 130 110 58 42 240 125 110 58 42 370 185 160 82 59 ESR 5 - 100 kHz 125 - 150C (m) 80 43 40 23 18 82 45 42 24 19 181 92 82 44 32 Part Number PEG127HA3180Q(1) PEG127HB3360Q(1) PEG127HC3470Q(1) PEG127HD3900Q(1) PEG127HE4130Q(1) PEG127KA3110Q(1) PEG127KB3220Q(1) PEG127KC3270Q(1) PEG127KD3520Q(1) PEG127KE3750Q(1) PEG127MA2330Q(1) PEG127MB2680Q(1) PEG127MC2800Q(1) PEG127MD3160Q(1) PEG127ME3230Q(1) Part Number (1) Insert packaging code. See Ordering Options Table for available options. Packaging Quantities Size Code A B C D E Packaging Quantities Tape and Reel Bulk 500 500 400 400 400 250 200 250 200 150 Print Detail Standard Marking for PEG and PEH types * KEMET Logo * Rated capacitance * Capacitance tolerance * Rated voltage * Date code * Polarity indication * Article code (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Roll Over for Order Info. A4013_PEG127 * 7/17/2013 6 Axial Aluminum Electrolytic Capacitors - PEG127, +150C Construction The manufacturing process begins with the anode foil being electrochemically etched to increase the surface area and then "formed" to produce the aluminum oxide layer. Both the anode and cathode foils are then interleaved with absorbent paper and wound into a cylinder. During the winding process, aluminum tabs are attached to each foil to provide the electrical contact. Extended cathode Anode foil The deck, complete with terminals, is attached to the tabs and then folded down to rest on top of the winding. The complete winding is impregnated with electrolyte before being housed in a suitable container, usually an aluminum can, and sealed. Throughout the process, all materials inside the housing must be maintained at the highest purity and be compatible with the electrolyte. Each capacitor is aged and tested before being sleeved and packed. The purpose of aging is to repair any damage in the oxide layer and thus reduce the leakage current to a very low level. Aging is normally carried out at the rated temperature of the capacitor and is accomplished by applying voltage to the device while carefully controlling the supply current. The process may take several hours to complete. Damage to the oxide layer can occur due to variety of reasons: * Slitting of the anode foil after forming * Attaching the tabs to the anode foil * Minor mechanical damage caused during winding A sample from each batch is taken by the quality department after completion of the production process. The following tests are applied and may be varied at the request of the customer. In this case the batch, or special procedure, will determine the course of action. Electrical: * Leakage current * Capacitance * ESR * Impedance * Tan Delta Mechanical/Visual: * Overall dimensions * Torque test of mounting stud * Print detail * Box labels * Packaging, including packed quantity (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com Foil tabs Tissues Cathode foil Etching Forming Winding Decking Impregnation Assembly Aging Testing Sleeving Packing A4013_PEG127 * 7/17/2013 7 Axial Aluminum Electrolytic Capacitors - PEG127, +150C KEMET Corporation World Headquarters Europe Asia Southern Europe Paris, France Tel: 33-1-4646-1006 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Sasso Marconi, Italy Tel: 39-051-939111 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Corporate Offices Fort Lauderdale, FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Bishop's Stortford, United Kingdom Tel: 44-1279-460122 2835 KEMET Way Simpsonville, SC 29681 Southeast Lake Mary, FL Tel: 407-855-8886 Espoo, Finland Tel: 358-9-5406-5000 Northeast Wilmington, MA Tel: 978-658-1663 Beijing, China Tel: 86-10-5829-1711 Shanghai, China Tel: 86-21-6447-0707 Taipei, Taiwan Tel: 886-2-27528585 Southeast Asia Singapore Tel: 65-6586-1900 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 Central Novi, MI Tel: 248-994-1030 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com A4013_PEG127 * 7/17/2013 8 Axial Aluminum Electrolytic Capacitors - PEG127, +150C Other KEMET Resources Tools Resource Location Configure A Part: CapEdge http://capacitoredge.kemet.com SPICE & FIT Software http://www.kemet.com/spice Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask Electrolytic LifeCalculator http://www.kemet.com:8080/elc Product Information Resource Location Products Technical Resources (Including Soldering Techniques) RoHS Statement Quality Documents http://www.kemet.com/products http://www.kemet.com/technicalpapers http://www.kemet.com/rohs http://www.kemet.com/qualitydocuments Product Request Resource Location Sample Request Engineering Kit Request http://www.kemet.com/sample http://www.kemet.com/kits Contact Resource Location Website Contact Us Investor Relations www.kemet.com http://www.kemet.com/contact http://www.kemet.com/ir Call Us 1-877-MyKEMET Twitter http://twitter.com/kemetcapacitors Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com A4013_PEG127 * 7/17/2013 9 Axial Aluminum Electrolytic Capacitors - PEG127, +150C Digitally signed by Jeannette Calvo DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing Communications, cn=Jeannette Calvo, email=jeannettecalvo@kemet.com Date: 2013.07.19 11:38:42 -04'00' (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 (864) 963-6300 * www.kemet.com A4013_PEG127 * 7/17/2013 10