INTEGRATED CIRCUITS DIVISION
www.ixysic.com
DS-LCA717-R05 1
LCA717
Single-Pole, Normally Open
OptoMOS® Relay
Applications
Features
Description
Parameter Ratings Units
Blocking Voltage 30 VP
Load Current 2 Arms / ADC
On-Resistance (max) 0.15
Pin Configuration
Switching Characteristics
of Normally Open Devices
• Very Low Maximum On-Resistance: 0.15
• High Load Current: 2A
• 3750Vrms Input/Output Isolation
• Low Drive Power Requirements
• High Reliability
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Small 6-Pin DIP Package
• Flammability Rating UL 94 V-0
• Surface Mount, Tape & Reel Version Available
• Sensor Circuitry
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment: Patient/Equipment Isolation
• Aerospace
• Industrial Controls
Approvals
• UL Recognized Component: File E76270
• CSA Certified Component: Certificate 1175739
• EN/IEC 60950-1 Certified Component:
Certificate available on our website
Ordering Information
Part # Description
LCA717 6-Pin DIP (50/Tube)
LCA717S 6-Pin Surface Mount (50/Tube)
LCA717STR 6-Pin Surface Mount (1000/Reel)
Form-A
IF
ILOAD
10%
90%
ton toff
1
3
2
4
5
6
+ Control
– Control
Do Not Use
Load
Do Not Use
Load
AC/DC Configuration
1
3
2
4
5
6
+ Control
– Control
Do Not Use
+ Load
– Load
DC Only Configuration
The LCA717 is a 30V single-pole, normally open
(1-Form-A) Solid State Relay. It uses optically
coupled MOSFET technology to provide 3750Vrms
of input to output isolation, and features an ultra-low
on-resistance for high-current operation.
Its optically coupled outputs, which use the patented
OptoMOS architecture, are controlled by a highly
efficient infrared LED.
Offering the superior reliability associated with
semiconductor devices, the LCA717 can be used to
replace mechanical relays. Because it has no moving
parts, it can offer faster, bounce-free switching in a
more compact surface mount or thru-hole package.
INTEGRATED CIRCUITS DIVISION
www.ixysic.com
2R05
LCA717
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Typical values are characteristic of the device at +25°C,
and are the result of engineering evaluations. They are
provided for information purposes only, and are not part of
the manufacturing testing requirements.
Parameter Ratings Units
Blocking Voltage 30 VP
Reverse Input Voltage 5 V
Input Control Current 50 mA
Peak (10ms) 1 A
Input Power Dissipation 1100 mW
Total Power Dissipation 2800 mW
Isolation Voltage, Input to Output 3750 Vrms
Operational Temperature -40 to +85 °C
Storage Temperature -40 to +125 °C
1 Derate linearly 1.33 mW / ºC
2 Derate linearly 6.67 mW / ºC
Absolute Maximum Ratings @ 25ºC
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics
Load Current, Continuous
AC/DC Configuration -I
L-- 2A
rms / ADC
DC Configuration 4A
DC
Peak Load Current t=10ms ILPK --±5A
P
On-Resistance1
AC/DC Configuration IL=1A RON -0.083 0.15
DC Configuration 0.023 0.04
Off-State Leakage Current VL=30VPILEAK -- 1µA
Switching Speeds
Turn-On IF=5mA, VL=10V ton -0.92 3 ms
Turn-Off toff 0.44 3
Output Capacitance IF=0mA, VL=15V, f=1MHz COUT - 100 - pF
Input Characteristics
Input Control Current to Activate IL=1A IF- 0.115 2 mA
Input Control Current to Deactivate - IF0.1 - - mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.5 V
Reverse Input Current VR=5V IR- - 10 µA
Common Characteristics
Input to Output Capacitance VIO=0V, f=1MHz CIO -3 -pF
1 Measurement taken within 1 second of on-time.
Electrical Characteristics @ 25ºC
ESD Rating (Human Body Model)
1000 Volts
ESD Rating
INTEGRATED CIRCUITS DIVISION
LCA717
www.ixysic.com 3
R05
LED Forward Voltage (V)
1.215 1.230 1.245 1.260 1.275 1.290 1.305
Device Count (N)
0
5
10
15
20
25
30
Typical LED Forward Voltage Drop
(N=50, IF=5mA)
Turn-On Time (ms)
0.730 0.785 0.840 0.895 0.950 1.005 1.060
Device Count (N)
0
5
10
15
20
25
Typical Turn-On Time Distribution
(N=50, IF=5mA, IL=120mA)
Turn-Off Time (ms)
0.41 0.42 0.43 0.44 0.45 0.46
Device Count (N)
0
5
10
15
20
25
Typical Turn-Off Time Distribution
(N=50, IF=5mA, IL=120mA)
LED Forward Current (mA)
0.105 0.110 0.115 0.120 0.125 0.130
Device Count (N)
0
5
10
15
20
25
Typical IF for Switch Operation
(N=50, IL=500mA)
On-Resistance (m:)
80.0 81.5 83.0 84.5 86.0 87.5 89.0
Device Count (N)
0
5
10
15
20
Typical On-Resistance Distribution
(N=50, IF=2mA, IL=1A)
Blocking Voltage (VP)
36.4 36.7 37.0 37.3 37.6 37.9 38.2
Device Count (N)
0
5
10
15
20
Blocking Voltage Distribution
(N=50)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
LED Forward Current (mA)
0.10
0.11
0.12
0.13
0.14
0.15
0.16
0.17
Typical IF for Switch Operation
vs. Temperature
(IL=1A)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Turn-On Time (Ps)
0
500
1000
1500
2000
2500
3000
3500
4000
Typical Turn-On Time
vs. Temperature
IF=5mA
IF=2mA
IF=1mA
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Turn-Off Time (Ps)
300
350
400
450
500
550
600
650
700
Typical Turn-Off Time
vs. Temperature
IF=1mA
IF=5mA
IF=2mA
Temperature (ºC)
-40 -20 0 20 40 60 80 100
LED Forward Voltage (V)
1.0
1.1
1.2
1.3
1.4
1.5
1.6
Typical LED Forward Voltage Drop
vs. Temperature
IF=50mA
IF=20mA
IF=10mA
IF=5mA
IF=2mA
IF=1mA
LED Forward Current (mA)
0 1020304050
Turn-On Time (Ps)
0
1000
2000
3000
4000
5000
Typical Turn-On Time
vs. LED Forward Current
LED Forward Current (mA)
0 1020304050
Turn-Off Time (Ps)
350
370
390
410
430
450
Typical Turn-Off Time
vs. LED Forward Current
PERFORMANCE DATA*
*Unless otherwise noted, data presented in these graphs is typical of device operation at 25ºC.
For guaranteed parameters not indicated in the written specifications, please contact our application department.
INTEGRATED CIRCUITS DIVISION
www.ixysic.com
4R05
LCA717
Temperature (ºC)
-40 -20 0 20 40 60 80 100
On-Resistance (:)
0.05
0.06
0.07
0.08
0.09
0.10
0.11
0.12
Typical On-Resistance
vs. Temperature
(IF=2mA, IL=1A)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Load Current
0
1
2
3
4
5
Maximum Load Current
vs. Temperature
AC/DC Configuration (ADC/Arms)
DC-Only Configuration (ADC)
Load Voltage (V)
-0.20 -0.15 -0.10 -0.05 0.00 0.05 0.10 0.15 0.20
Load Current (A)
-2.0
-1.5
-1.0
-0.5
0.0
0.5
1.0
1.5
2.0
Typical Load Current
vs. Load Voltage
(IF=2mA)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Blocking Voltage (VP)
35.5
36.0
36.5
37.0
37.5
38.0
38.5
39.0
Typical Blocking Voltage
vs. Temperature
(IL=1PA)
Temperature (ºC)
-40 -20 0 20 40 60 80 100
Leakage Current (nA)
0
50
100
150
200
250
300
350
Typical Leakage vs. Temperature
Measured Across Pins 4&6
(VL=30V)
Time
10Ps 100Ps 1ms 10ms 100ms 1s 10s 100s
Load Current (A)
0
1
2
3
4
5
6
7
8
Energy Rating Curve
PERFORMANCE DATA*
*Unless otherwise noted, data presented in these graphs is typical of device operation at 25ºC.
For guaranteed parameters not indicated in the written specifications, please contact our application department.
INTEGRATED CIRCUITS DIVISION
LCA717
www.ixysic.com 5
R05
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated
Circuits classifies its plastic encapsulated devices for moisture sensitivity according to the latest version of
the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of
our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices
when handled according to the limitations and information in that standard as well as to any limitations set forth in the
information or standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) classification as shown below, and should be handled
according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device Moisture Sensitivity Level (MSL) Classifi cation
LCA717 / LCA717S MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Soldering Profile
Provided in the table below is the Classification Temperature (TC) of this product and the maximum dwell time the
body temperature of this device may be (TC - 5)ºC or greater. The classification temperature sets the Maximum
Body Temperature allowed for this device during lead-free reflow processes. For through-hole devices, and any other
processes, the guidelines of J-STD-020 must be observed.
Device Classifi cation Temperature (Tc) Dwell Time (tp) Max Refl ow Cycles
LCA717 250ºC 30 seconds 1
LCA717S 250ºC 30 seconds 3
Board Wash
IXYS Integrated Circuits recommends the use of no-clean flux formulations. Board washing to reduce or remove flux
residue following the solder reflow process is acceptable provided proper precautions are taken to prevent damage
to the device. These precautions include, but are not limited to: using a low pressure wash and providing a follow
up bake cycle sufficient to remove any moisture trapped within the device due to the washing process. Due to the
variability of the wash parameters used to clean the board, determination of the bake temperature and duration
necessary to remove the moisture trapped within the package is the responsibility of the user (assembler). Cleaning
or drying methods that employ ultrasonic energy may damage the device and should not be used. Additionally, the
device must not be exposed to flux or solvents that are Chlorine- or Fluorine-based.
INTEGRATED CIRCUITS DIVISION
www.ixysic.com
6R05
LCA717
Dimensions
mm
(inches)
PCB Hole Pattern
6.350 ± 0.127
(0.250 ± 0.005)
2.540 ± 0.127
(0.100 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
5.080 ± 0.127
(0.200 ± 0.005)
6 - 0.800 DIA.
(6 - 0.031 DIA.)
0.254 ± 0.0127
(0.010 ± 0.0005)
9.144 ± 0.508
(0.360 ± 0.020)
7.239 TYP
(0.285 TYP)
7.620 ± 0.254
(0.300 ± 0.010)
3.302 ± 0.051
(0.130 ± 0.002) 4.064 TYP
(0.160 TYP)
0.457 ± 0.076
(0.018 ± 0.003)
8.382 ± 0.381
(0.330 ± 0.015) 2.54 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
1.651 ± 0.254
(0.065 ± 0.010)
Pin 1
Dimensions
mm
(inches)
PCB Land Pattern
0.254 ± 0.0127
(0.010 ± 0.0005)
7.620 ± 0.254
(0.300 ± 0.010)
0.635 ± 0.127
(0.025 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002)
4.445 ± 0.254
(0.175 ± 0.010)
2.54
(0.10)
8.90
(0.3503)
1.65
(0.0649)
0.65
(0.0255)
8.382 ± 0.381
(0.330 ± 0.015) 2.54 ± 0.127
(0.100 ± 0.005)
9.524 ± 0.508
(0.375 ± 0.020) 6.350 ± 0.127
(0.250 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003)
1.651 ± 0.254
(0.065 ± 0.010)
1.651 ± 0.254
(0.065 ± 0.010)
Pin 1
LCA717
LCA717S
MECHANICAL DIMENSIONS
INTEGRATED CIRCUITS DIVISION
Specification: DS-LCA717-R05
©Copyright 2018, IXYS Integrated Circuits
OptoMOS® is a registered trademark of IXYS Integrated Circuits
All rights reserved. Printed in USA.
6/26/2018
For additional information please visit our website at: www.ixysic.com
7
LCA717
IXYS Integrated Circuits makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes
to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits'
Standard Terms and Conditions of Sale, IXYS Integrated Circuits assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but
not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits' product may result in direct physical harm, injury, or death to a person or severe property
or environmental damage. IXYS Integrated Circuits reserves the right to discontinue or make changes to its products at any time without notice.
NOTES:
1. All dimensions carry tolerances of EIA Standard 481-2
2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
Dimensions
mm
(inches)
Embossment
Embossed
Carrier
330.2 Dia
(13.00 Dia)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
W=16.00
(0.63)
B0 = 10.10
(0.398)
A0 = 10.10
(0.398)
P1 = 12.00
(0.472)
K1 = 3.80
(0.15)
K0 = 4.90
(0.19)
User Direction of Feed
LCA717STR Tape & Reel
