LCA717 Single-Pole, Normally Open OptoMOS(R) Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) Ratings 30 2 0.15 Units VP Arms / ADC Features * Very Low Maximum On-Resistance: 0.15 * High Load Current: 2A * 3750Vrms Input/Output Isolation * Low Drive Power Requirements * High Reliability * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Small 6-Pin DIP Package * Flammability Rating UL 94 V-0 * Surface Mount, Tape & Reel Version Available Description The LCA717 is a 30V single-pole, normally open (1-Form-A) Solid State Relay. It uses optically coupled MOSFET technology to provide 3750Vrms of input to output isolation, and features an ultra-low on-resistance for high-current operation. Its optically coupled outputs, which use the patented OptoMOS architecture, are controlled by a highly efficient infrared LED. Offering the superior reliability associated with semiconductor devices, the LCA717 can be used to replace mechanical relays. Because it has no moving parts, it can offer faster, bounce-free switching in a more compact surface mount or thru-hole package. Applications * Sensor Circuitry * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment: Patient/Equipment Isolation * Aerospace * Industrial Controls Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component: Certificate available on our website Ordering Information Part # LCA717 LCA717S LCA717STR Description 6-Pin DIP (50/Tube) 6-Pin Surface Mount (50/Tube) 6-Pin Surface Mount (1000/Reel) Pin Configuration AC/DC Configuration 1 + Control - Control Do Not Use 6 2 5 3 4 Switching Characteristics of Normally Open Devices Load Do Not Use Form-A Load IF DC Only Configuration + Control - Control Do Not Use DS-LCA717-R05 1 6 2 5 3 4 90% 10% ILOAD + Load ton toff - Load www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION LCA717 Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate linearly 1.33 mW / C 2 Derate linearly 6.67 mW / C Ratings 30 5 50 1 100 800 3750 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Typical values are characteristic of the device at +25C, and are the result of engineering evaluations. They are provided for information purposes only, and are not part of the manufacturing testing requirements. Electrical Characteristics @ 25C Parameter Output Characteristics Load Current, Continuous AC/DC Configuration DC Configuration Peak Load Current On-Resistance1 AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Input to Output Capacitance Conditions Symbol Min Typ Max Units - IL - - 2 4 5 Arms / ADC ADC AP t=10ms ILPK - IL=1A RON - 0.083 0.023 - 0.15 0.04 1 VL=30VP ILEAK - - 0.92 0.44 100 3 3 - A IF=0mA, VL=15V, f=1MHz ton toff COUT IL=1A IF=5mA VR=5V IF IF VF IR 0.1 0.9 - 0.115 1.2 - 2 1.5 10 mA mA V A VIO=0V, f=1MHz CIO - 3 - pF IF=5mA, VL=10V - ms pF 1 Measurement taken within 1 second of on-time. ESD Rating ESD Rating (Human Body Model) 1000 Volts 2 www.ixysic.com R05 INTEGRATED CIRCUITS DIVISION LCA717 PERFORMANCE DATA* Typical Turn-On Time Distribution (N=50, IF=5mA, IL=120mA) 25 20 20 20 15 10 15 10 5 0 Typical IF for Switch Operation (N=50, IL=500mA) Typical On-Resistance Distribution (N=50, IF=2mA, IL=1A) 5 15 10 5 0.110 0.115 0.120 0.125 LED Forward Current (mA) 15 10 5 80.0 1.3 1.2 1.0 -40 0.17 IF=5mA IF=2mA IF=1mA -20 83.0 84.5 86.0 87.5 20 40 60 Temperature (C) 80 36.4 450 4000 430 3000 2000 1000 10 20 30 40 LED Forward Current (mA) Turn-On Time (Ps) 0.13 0.12 0.11 80 370 0 10 20 30 40 LED Forward Current (mA) 700 IF=1mA 650 3000 2500 IF=2mA 2000 1500 IF=5mA 1000 100 0 -40 50 Typical Turn-Off Time vs. Temperature IF=1mA 600 IF=2mA 550 500 450 400 IF=5mA 350 500 20 40 60 Temperature (C) 390 50 4000 0.14 38.2 410 Typical Turn-On Time vs. Temperature 0.15 37.0 37.3 37.6 37.9 Blocking Voltage (VP) 350 0 3500 0 36.7 Typical Turn-Off Time vs. LED Forward Current 5000 100 Typical IF for Switch Operation vs. Temperature (IL=1A) -20 5 89.0 0 0 0.16 0.10 -40 81.5 Turn-Off Time (Ps) 1.4 1.1 10 Typical Turn-On Time vs. LED Forward Current Turn-On Time (Ps) IF=50mA IF=20mA IF=10mA 1.5 15 On-Resistance (m:) 1.6 0.46 0 0 0.130 Turn-Off Time (Ps) 0.105 0.42 0.43 0.44 0.45 Turn-Off Time (ms) 20 Device Count (N) 20 0.41 Blocking Voltage Distribution (N=50) 20 Device Count (N) Device Count (N) 10 0 0.730 0.785 0.840 0.895 0.950 1.005 1.060 Turn-On Time (ms) Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage (V) 15 0 1.215 1.230 1.245 1.260 1.275 1.290 1.305 LED Forward Voltage (V) 25 0 Device Count (N) 25 25 5 LED Forward Current (mA) Typical Turn-Off Time Distribution (N=50, IF=5mA, IL=120mA) 30 Device Count (N) Device Count (N) Typical LED Forward Voltage Drop (N=50, IF=5mA) -20 0 20 40 60 Temperature (C) 80 100 300 -40 -20 0 20 40 60 Temperature (C) 80 100 *Unless otherwise noted, data presented in these graphs is typical of device operation at 25C. For guaranteed parameters not indicated in the written specifications, please contact our application department. R05 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION LCA717 PERFORMANCE DATA* Typical On-Resistance vs. Temperature (IF=2mA, IL=1A) 0.12 Maximum Load Current vs. Temperature DC-Only Configuration (ADC) 0.08 0.07 AC/DC Configuration (ADC/Arms) 2 1.0 0.5 0.0 -0.5 -1.0 -1.5 0 0 20 40 60 Temperature (C) 80 100 -40 Typical Blocking Voltage vs. Temperature (IL=1PA) 350 38.5 38.0 37.5 37.0 36.5 36.0 -20 0 20 40 60 Temperature (C) 80 100 -20 0 20 40 60 Temperature (C) 80 100 -2.0 -0.20 -0.15 -0.10 -0.05 0.00 0.05 0.10 0.15 0.20 Load Voltage (V) Typical Leakage vs. Temperature Measured Across Pins 4&6 (VL=30V) Energy Rating Curve 8 300 7 250 6 Load Current (A) -20 Leakage Current (nA) Blocking Voltage (VP) 3 1 0.06 35.5 -40 Load Current (A) Load Current On-Resistance (:) 0.09 39.0 1.5 4 0.10 0.05 -40 2.0 5 0.11 Typical Load Current vs. Load Voltage (IF=2mA) 200 150 100 50 0 -40 5 4 3 2 1 -20 0 20 40 60 Temperature (C) 80 100 0 10Ps 100Ps 1ms 10ms 100ms Time 1s 10s 100s *Unless otherwise noted, data presented in these graphs is typical of device operation at 25C. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R05 INTEGRATED CIRCUITS DIVISION LCA717 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits classifies its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) classification as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Classification LCA717 / LCA717S MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Soldering Profile Provided in the table below is the Classification Temperature (TC) of this product and the maximum dwell time the body temperature of this device may be (TC - 5)C or greater. The classification temperature sets the Maximum Body Temperature allowed for this device during lead-free reflow processes. For through-hole devices, and any other processes, the guidelines of J-STD-020 must be observed. Device Classification Temperature (Tc) Dwell Time (tp) Max Reflow Cycles LCA717 LCA717S 250C 250C 30 seconds 30 seconds 1 3 Board Wash IXYS Integrated Circuits recommends the use of no-clean flux formulations. Board washing to reduce or remove flux residue following the solder reflow process is acceptable provided proper precautions are taken to prevent damage to the device. These precautions include, but are not limited to: using a low pressure wash and providing a follow up bake cycle sufficient to remove any moisture trapped within the device due to the washing process. Due to the variability of the wash parameters used to clean the board, determination of the bake temperature and duration necessary to remove the moisture trapped within the package is the responsibility of the user (assembler). Cleaning or drying methods that employ ultrasonic energy may damage the device and should not be used. Additionally, the device must not be exposed to flux or solvents that are Chlorine- or Fluorine-based. R05 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION LCA717 MECHANICAL DIMENSIONS LCA717 8.382 0.381 (0.330 0.015) PCB Hole Pattern 7.239 TYP (0.285 TYP) 2.54 0.127 (0.100 0.005) 6 - 0.800 DIA. (6 - 0.031 DIA.) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) 2.540 0.127 (0.100 0.005) 7.620 0.127 (0.300 0.005) Pin 1 7.620 0.254 (0.300 0.010) 1.651 0.254 (0.065 0.010) 3.302 0.051 (0.130 0.002) 0.254 0.0127 (0.010 0.0005) 6.350 0.127 (0.250 0.005) 5.080 0.127 (0.200 0.005) 4.064 TYP (0.160 TYP) Dimensions mm (inches) 0.457 0.076 (0.018 0.003) LCA717S 8.382 0.381 (0.330 0.015) 9.524 0.508 (0.375 0.020) Pin 1 0.635 0.127 (0.025 0.005) PCB Land Pattern 2.54 0.127 (0.100 0.005) 2.54 (0.10) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 1.651 0.254 (0.065 0.010) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 8.90 (0.3503) 1.65 (0.0649) 0.65 (0.0255) 3.302 0.051 (0.130 0.002) 4.445 0.254 (0.175 0.010) Dimensions mm (inches) 1.651 0.254 (0.065 0.010) 6 www.ixysic.com R05 INTEGRATED CIRCUITS DIVISION LCA717 LCA717STR Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=16.00 (0.63) B0 = 10.10 (0.398) K0 = 4.90 (0.19) K1 = 3.80 (0.15) A0 = 10.10 (0.398) P1 = 12.00 (0.472) User Direction of Feed Embossed Carrier Embossment Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits' Standard Terms and Conditions of Sale, IXYS Integrated Circuits assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits' product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS-LCA717-R05 (c)Copyright 2018, IXYS Integrated Circuits OptoMOS(R) is a registered trademark of IXYS Integrated Circuits All rights reserved. Printed in USA. 6/26/2018