This is information on a product in full production.
October 2012 Doc ID 16934 Rev 3 1/10
10
2N5401HR
Hi-Rel PNP bipolar transistor 150 V, 0.5 A
Datasheet — production data
Features
■Hi-Rel PNP bipolar transistor
■Linear gain characteristics
■ESCC qualified
■European preferred part list - EPPL
■100 krad low dose rate
■Radiation level: lot specific total dose contact
marketing for specified level
Description
The 2N5401HR is a silicon planar epitaxial PNP
transistor available in TO-18 and LCC-3
packages. It is specifically designed for
aerospace Hi-Rel applications and ESCC
qualified according to the 5202-014 specification.
In case of conflict between this datasheet and
ESCC detailed specification, the latter prevails.
Figure 1. Internal schematic diagram
BVCEO 150 V
IC (max) 0.5 A
HFE at 10 V - 150 mA > 60
Operating temperature range -65°C to +200°C
TO-18 LCC-3
3
1
2
3
1
2
LCC-3UB
3
1
2
4
Table 1. Device summary
Order codes ESCC part num. Quality level Rad level Packages Lead finish Mass (g) EPPL
2N5401UB1 - Eng. Model LCC-3UB Gold 0.06 -
2N5401SW 5202/014/05 ESCC Flight 100 krad LCC-3 Solder Dip 0.06 Y
2N5401UB06 5202/014/06 ESCC Flight LCC-3UB Gold 0.06 -
2N5401UB07 5202/014/07 ESCC Flight LCC-3UB Solder Dip 0.06 -
SOC5401 - Eng. Model LCC-3 Gold 0.06 -
SOC5401HRB 5202/014/04 or 05 ESCC Flight LCC-3 Gold/Solder Dip(1) 0.06 Y
2N5401/T1 - Eng. Model TO-18 Gold 0.40 -
2N5401HR 5202/014/01 or 02 ESCC Flight TO-18 Gold/Solder Dip (1) 0.40 -
1. Depending ESCC part number mentioned on the purchase order.
www.st.com
Electrical ratings 2N5401HR
2/10 Doc ID 16934 Rev 3
1 Electrical ratings
Table 2. Absolute maximum ratings
Symbol Parameter Value Unit
VCBO Collector-base voltage (IE = 0) -160 V
VCEO Collector-emitter voltage (IB = 0) -150 V
VEBO Emitter-base voltage (IC = 0) -5 V
IC
Collector current
for 2N5401HR
for SOC5401HRB
-0.6
-0.5
A
A
PTOT
Total dissipation at Tamb ≤ 25 °C
for 2N5401HR
for SOC5401HRB
for SOC5401HRB (1)
Total dissipation at Tc ≤ 25 °C
for 2N5401HR
1. When mounted on a 8x10x0.6 mm ceramic substrate.
0.36
0.36
0.58
1.2
W
W
W
W
TSTG Storage temperature -65 to 200 °C
TJMax. operating junction temperature 200 °C
Table 3. Thermal data for through-hole package
Symbol Parameter Value Unit
RthJC
RthJA
Thermal resistance junction-case __ max
Thermal resistance junction-ambient __ max
146
486
°C/W
°C/W
Table 4. Thermal data for SMD package
Symbol Parameter Value Unit
RthJA
Thermal resistance junction-ambient __ max
Thermal resistance junction-ambient (1) __ max
1. When mounted on a 8x10x0.6 mm ceramic substrate.
486
302
°C/W
°C/W
2N5401HR Electrical characteristics
Doc ID 16934 Rev 3 3/10
2 Electrical characteristics
Tcase = 25 °C unless otherwise specified.
Table 5. Electrical characteristics
Symbol Parameter Test conditions Min. Typ. Max. Unit
ICBO
Collector-base cut-off
current (IE = 0)
VCB = -120 V
VCB = -120 V TC = 150 °C
-50
-50
nA
µA
IEBO
Emitter-base cut-off
current (IC = 0) VEB = -3 V -50 nA
V(BR)CBO
Collector-base
breakdown voltage
(IE = 0)
IC = -100 µA -160 V
V(BR)CEO (1)
1. Pulsed duration = 300 µs, duty cycle ≤ 2 %
Collector-emitter
breakdown voltage
(IB = 0)
IC = -1 mA -150 V
V(BR)EBO
Emitter-base
breakdown voltage
(IC = 0)
IE = -10 µA -5 V
VCE(sat) (1) Collector-emitter
saturation voltage
IC = -10 mA IB = -1 mA
IC = -50 mA IB = -5 mA
-0.2
-0.5
V
V
VBE(sat) (1) Base-emitter
saturation voltage
IC = -10 mA IB = -1 mA
IC = -50 mA IB = -5 mA
-1
-1
V
V
hFE (1) DC current gain
IC = -1 mA VCE = -5 V
IC = -10 mA VCE = -5 V
IC = -50 mA VCE = -5 V
IC = -10 mA VCE = -5 V
Tamb = -55 °C
50
60
60
20
240
hfe
Small signal current
gain
VCE = -10 V IC = -10 mA
f = 10 kHz 5
Cobo
Output capacitance
(IE = 0) VCB = -10 V f = 1 MHz 6 pF
Package mechanical data 2N5401HR
4/10 Doc ID 16934 Rev 3
3 Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
2N5401HR Package mechanical data
Doc ID 16934 Rev 3 5/10
Figure 2. LCC-3 drawings
Table 6. LCC-3 mechanical data
Dim.
mm.
Min. Typ. Max.
A 1.16 1.42
C 0.45 0.50 0.56
D 0.60 0.76 0.91
E 0.91 1.01 1.12
F 1.95 2.03 2.11
G 2.92 3.05 3.17
I 2.41 2.54 2.66
J 0.42 0.57 0.72
K 1.37 1.52 1.67
L 0.40 0.50 0.60
M 2.46 2.54 2.62
N 1.80 1.90 2.00
R 0.30
21
3
Package mechanical data 2N5401HR
6/10 Doc ID 16934 Rev 3
Figure 3. LCC-3UB drawings
Table 7. LCC-3UB mechanical data
Dim.
mm.
Min. Typ. Max.
A 1.16 1.42
C 0.46 0.51 0.56
D 0.56 0.76 0.96
E 0.92 1.02 1.12
F 1.95 2.03 2.11
G 2.92 3.05 3.18
I 2.41 2.54 2.67
J 0.42 0.57 0.72
K 1.37 1.52 1.67
L 0.41 0.51 0.61
M 2.46 2.54 2.62
N 1.81 1.91 2.01
r 0.20
r1 0.30
r2 0.56
2N5401HR Package mechanical data
Doc ID 16934 Rev 3 7/10
Figure 4. TO-18 drawings
Table 8. TO-18 mechanical data
Dim.
mm.
Min. Typ. Max.
A 12.7
B 0.49
D 5.3
E 4.9
F 5.8
G 2.54
H1.2
I1.16
L 45°
Order codes 2N5401HR
8/10 Doc ID 16934 Rev 3
4 Order codes
Contact ST sales office for information about the specific conditions for:
– Products in die form
– Tape and reel packing
Table 9. Order codes
Order codes ESCC part
number
Radiation
level Packages Lead finish Marking EPPL Packing
2N5401UB1 - LCC-3UB Gold 2N5401UB1 - Waffle pack
2N5401SW 5202/014/05 100 krad LCC-3 Solder Dip 520201407 Y Waffle pack
2N5401UB06 5202/014/06 LCC-3UB Gold 520201406 - Waffle pack
2N5401UB07 5202/014/07 LCC-3UB Solder Dip 520201407 - Waffle pack
SOC5401 - LCC-3 Gold SOC5401 - Waffle pack
SOC5401HRB 5202/014/04
or 05 LCC-3 Gold/Solder Dip(1)
1. Depending ESCC part number mentioned on the purchase order.
520201404 or 05 Y Waffle pack
2N5401/T1 - TO-18 Gold 2N5401/T1 - Strip pack
2N5401HR 5202/014/01
or 02 TO-18 Gold/Solder Dip(1) 520201401 or 02 - Strip pack
2N5401HR Revision history
Doc ID 16934 Rev 3 9/10
5 Revision history
Table 10. Document revision history
Date Revision Changes
04-Jan-2010 1 Initial release
13-Jul-2010 2 Modified Table 1 on page 1, added Table 9 on page 8
10-Oct-2012 3 Table 1 on page 1 and Section 4: Order codes have been updated.
Section 3: Package mechanical data has been updated.
2N5401HR
10/10 Doc ID 16934 Rev 3
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2012 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
