Technical Data 4378
Effective May 2017
Supersedes August 2010
Product features
Ordering
42510ESDA-TR1
ESD suppressor four-channel
•Halogen free, lead free and RoHS compliant for
global applications
•Ultra-low capacitance (0.1pF typical) ideally suited
for protecting high speed data applications
•Provides ESD protection with fast response time
(<1ns) allowing equipment to pass the IEC
61000-4-2 Level 4 test
•Four (4) channel array
•Zero signal distortion
•Low leakage current (<0.01µA typical)
Pb
HALOGEN
HF
FREE
Applications
•Digital video equipment
•Mobile phone
•GPS Antenna
•Bluetooth communication equipment antenna circuit
•IEEE-1394
•DVI
•HDMI
Surface Mount Device
Part Number Description
42510ESDA-TR1 5000 suppressors in paper tape on a 7 inch
(178 mm) reel
42510 ESDA- TR1
Part Numbering System:
•Four channel SIN 1 chip
•2.5x1.0mm footprint size
•ESDA ESD Suppressor
•Tape and reel packaging code
Design considerations
•Follow the soldering recommendations to avoid deforming
product
•Do not use high temperature, high humidity or corrosive
atmospheres (sulfide and chloride gas) that could damage the
solderability
•Moisture Sensitivity Level (MSL) according to J-STD-020
standard: Level 2 (Floor Life 1 year under <30°C/65%RH
conditions) Solderability requirement according to IPC/JEDEC J-
STD-002C, Test D, Test B1
•Use Sn/Ag/Cu (96.5/3.0/0.5) or equivalent solder and activated
flux #5 or equivalent.
Environmental Specifications
Characteristic Value
Load Humidity +85 °C/90% RH with rated voltage for 1000 hrs
Thermal Shock -40 °C to +85 °C, 30 minute cycle, 5 cycles
Moisture Resistance Test J-STD-020 Standard: Level 2
(1 year floor life under 30 °C/65% RH conditions
Operating Temperature Range -40 °C to +85 °C (-40 °F to 185 °F)
Storage Temperature Range -55 °C to +125 °C (-67 °F to +257 °F)
* Note, Capacitance measured with 1 Vrms
Characteristic Value/Range
Rated Voltage (max) 12 V
Leakage Current (max @ 12Vdc) 0.01 µA
Trigger Voltage (Vt)300 V Typical
Clamping Voltage (Vc)30 V Typical
Capacitance (Cp) @1MHz* 0.1 pF Typical
Response Time <1 ns
ESD Voltage Capability, IEC 61000-4-2 8 kV
Contact Discharge Mode
ESD Voltage Capability, IEC 61000-4-2
Air Discharge Mode 15 kV
ESD Withstand Pulses 100 Times Minimal
Eaton
Electronics Division
1000 Eaton Boulevard
Cleveland, OH 44122
United States
www.eaton.com/electronics
© 2017 Eaton
All Rights Reserved
Printed in USA
Publication No. 4378 BU-SB10816
May 2017
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
Life Support Policy: Eaton does not authorize the use of any of its products for use in life support devices or systems without the express written
approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly
used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.
Eaton reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Eaton also
reserves the right to change or update, without notice, any technical information contained in this bulletin.
42510ESDA-TR1
ESD suppressor four-channel
Technical Data 4378
Effective May 2017
Soldering recommendations
•Compatible with lead and lead-free solder reflow
processes
•Hand soldering - soldering tip should not directly
touch part +280 °C max for 3 sec. max
•Peak reflow temperatures and durations:
oIR Reflow = 260°C max for 20 sec. max
oWave Solder = 260°C max for 10 sec. max
L
W
E
T
B
C
D
Dimensions - mm
CB D E L T W
0.2 0.3 0.2 0.5 2.5 0.5 1.0
±0.1 ±0.05 ±0.05 ±0.05 ±0.1 ±0.1 ±0.1
Recommended Pad Layout - mm
GPP
1X1
XY1
YZ
0.2 0.5 1 0.2 0.3 0.6 1.4 1.4
Note: Print solder 0.01~0.015mm thick.
7RS7DSH
)
/
:
(
'
$
&
%
Unit: mm
AB C D E F LW
8.00 3.50 1.75 2.00 4.00 1.50 2.90 1.40
±0.30 ±0.05 ±0.10 ±0.05 ±0.10 ±0.10 ±0.20 ±0.20
Packaging-mm
Supplied in tape and reel packaging, 5000 parts per seven inch
(178 mm) reel per EIA Standard 481-1
Recommended IR Reflow Profile
Circuit Schematic HDMI Application
