Crimp 5.08mm VB CONNECTOR Disconnectable Crimp style connectors pitch Features ------------------------ * Proven box-shaped contact This connector was designed and developed for use in the power supply circuits utilizing the contacts so successfully used in the VH connector. This large current carrying capacity connector for printed circuit boards can be used with primary power supply circuits of consumer electronic products and various other circuits requiring large currents. Specifications ------------------- * Current rating: 7A AC, DC (AWG #18) * Voltage rating: 250V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/10m max. After environmental testing/20m max. * Insulation resistance: 500M min. * Withstanding voltage: 1,500V AC/minute * Applicable wire: AWG #22 to #18 * Applicable PC board thickness: 1.6mm Note: Do not branch in parallel current which exceeds the rated current. If branched in parallel, current imbalance or other problems may develop. If it is absolutely necessary to branch such a large current in parallel, design the circuits without causing imbalance and provide an extra margin for each circuit. * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards ---------------------- 0 1 Recognized E60389 Certified LR20812 1 VB CONNECTOR Contact ----------------------------------------------------------------- Applicable wire Model No. mm AWG # Insulation O.D. (mm) 0.33 to 0.83 22 to 18 1.7 to 3.0 2 SVH-21T-P1.1 Q'ty / reel 4,500 10.6 3.0 Material and Finish 4.2 4.0 3.8 Phosphor bronze, tin-plated (reflow treatment) RoHS compliance Note: Contact JST for brass products. Housing ----------------------------------------------------------------- 1.4 1.9 8.7 Circuits 5.08 A B 2.4 15.3 Dimensions (mm) Model No. A B Q'ty / bag 2 VBR- 2 5.08 9.88 1,000 2 VBR- 2(3) 10.16 14.96 1,000 3 VBR- 3 10.16 14.96 1,000 3 VBR- 3(4) 15.24 20.04 1,000 4 VBR- 4 15.24 20.04 1,000 4 VBR- 4(5) 20.32 25.12 1,000 5 VBR- 5(6) 25.40 30.20 500 6 VBR- 6(7) 30.48 35.28 500 7 VBR- 7(8) 35.56 40.36 500 8 VBR- 8(9) 40.64 45.44 500 9 VBR- 9(10) 45.72 50.52 500 12 VBR-12(13) 60.96 65.76 200 Material PA 6, UL94V-0, natural (white) RoHS compliance 2 VB CONNECTOR Header ------------------------------------------------------------------ Top entry type of PBT Circuits B A (2.54) (2.54) A B Q'ty / box 2 B 2P -VB-2 5.08 10.16 1,000 2 B 2P 3-VB-2 10.16 15.24 500 3 B 3P -VB-2 10.16 15.24 500 3 B 3P 4-VB-2 15.24 20.32 500 4 B 4P -VB-2 15.24 20.32 500 4 B 4P 5-VB-2 20.32 25.40 250 5 B 5P 6-VB-2 25.40 30.48 250 6 B 6P 7-VB-2 30.48 35.56 200 7 B 7P 8-VB-2 35.56 40.64 200 8 B 8P 9-VB-2 40.64 45.72 200 9 B 9P10-VB-2 45.72 50.80 100 12 B12P13-VB-2 60.96 66.04 100 6.35 1.14 10.16 3.6 3.2 (10.65) 5.08 Dimensions (mm) Model No. Material and Finish Post: Brass copper-undercoated, tin-plated (reflow treatment) Wafer: PBT, UL94V-0, natural (white) RoHS compliance This product displays (LF)(SN) on a label. Model No. Top entry type of nylon Circuits B A 2.4 5.08 6.35 3.6 3.2 10.65 10.16 1.14 Side entry type of nylon 5.08 A B Top entry type Side entry type 1,000 2 B 2P -VB B 2P S-VB - 5.08 9.88 1,000 2 B 2P 3-VB 10.16 14.96 500 - 3 B 3P 4-VB B 3P 4S-VB 15.24 20.04 500 250 4 B 4P 5-VB B 4P 5S-VB 20.32 25.12 250 200 5 B 5P 6-VB B 5P 6S-VB 25.40 30.20 250 200 6 B 6P 7-VB B 6P 7S-VB 30.48 35.28 200 100 7 B 7P 8-VB B 7P 8S-VB 35.56 40.36 200 100 8 B 8P 9-VB B 8P 9S-VB 40.64 45.44 200 100 9 B 9P10-VB B 9P10S-VB 45.72 50.52 100 100 12 B12P13-VB B12P13S-VB 60.96 65.76 100 100 (2.4) 10.16 Post: Brass, copper-undercoated, tin-plated (reflow treatment) Wafer: PA 66, UL94V-0, natural (white) 15.0 3.6 3.2 8.1 RoHS compliance This product displays (LF)(SN) on a label. 1.14 3 Q'ty / box Dimensions (mm) Side entry type Material and Finish B A (2.4) Top entry type 6.35 VB CONNECTOR PC board layout (viewed from soldering side) and Assembly layout ------------------- Top entry type Side entry type 8.7 5.080.05 5.080.05 18.5 1.70.05 11.4 20.0 1.70.05 Note: 1. Tolerances are non-cumulative: 0.05mm for all centers. 2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. Crimping machine, Applicator----------------------------------------------- Contact Crimping machine SVH-21T-P1.1 AP-K2N Crimp applicator Dies Crimp applicator with dies MKS-L MK/SVH-21-11 APLMK SVH21-11 *MKS-SC SC/SVH-21-11 APLSC SVH21-11 Note: *Strip-crimp applicator 4