Round Water-resistant Connectors (M8/S8) XS3 CSM_XS3_DS_E_7_2 Small Round Water-resistive Connectors * Water-resistive, compact connector meets IP67 requirements. * Conventional M8 screw-mounting models are available along with S8 snap-in models that connect and disconnect with one touch. * Ideal for a wide variety of FA and OA applications. * Connectors on both cable ends require no harness work. * Some new M8 models with 3 or 5 poles. Refer to Safety Precautions on page 21. Ratings and Specifications Item Rated current Rated voltage Model XS3F/H/W/P/M 1 ADC 125 VDC *2 XS3F-M52@-5@@-A 3 ADC 30 VDC Contact resistance (connector) 40 m max. (20 mV max., 100 mA max.) Insulation resistance Dielectric strength (connector) Degree of protection Insertion tolerance Cable tensile strength *1 Ambient operating temperature range Ambient humidity range 1,000 M min. (at 500 VDC) 1,000 VAC for 1 min (leakage current: 1 mA max.) IP67 (IEC60529) 200 times 49 N/15 s -25 to 70C XS3M-M524-1@ XS3R 1 ADC 125 VDC 60 m max. (20 mVDC max., 100 mA max.) 650 VAC for 1 min (leakage current: 1 mA max.) 1,000 VAC for 1 min (leakage current: 1 mA max.) -25 to 85C -25 to 70C 20 to 85%RH *1. Models with cable only *2. Except 5poles Materials and Finish Connector Item Contact block Type Model Contacts Thread bracket Body Shell C-Ring Grounding fixture Nut Cover O-ring M8 XS3F/H/W/R XS3P/M * XS3M-M524-1@ PBT resin (UL94 V-0) light gray or black Phosphor bronze/ Brass/nickel base, nickel base, 0.40.4-mm gold plating m gold plating Brass/nickel plating or SUS316L -- -- Brass/nickel plating Nickel-plated zinc alloy -- -- Phosphor bronze/tin plating -- Phosphor bronze/tin plating -- Brass/nickel plating Soft PBT resin -- (UL94 V-0) Rubber S8 XS3H/W (Plug side) XS3F/W (Socket side) Phosphor bronze/ nickel base, 0.4m gold plating XS3P Brass/nickel base, 0.4-m gold plating Brass/nickel plating -- -- TPEE -- -- -- Brass/nickel plating TPEE -- *Except 5poles Note: The XS3M is for both M8 and S8. Cables Item Poles Standard cable Robot cable 3 poles 4 poles 4 mm dia, AWG24 (0.2 mm2) Structure: 0.12 mm/18 4 mm dia, AWG24 (0.2 mm2) Structure: 0.08 mm/40 5 poles 4.7 mm dia, AWG24 (0.2 mm2) Structure: 0.16 mm/11 Note: Only the XS3F (socket) is available with 5 pins. Pin Arrangement (Engaged Side) Item -- Poles 3 poles Male (plug) contacts 1 Female (socket) contacts 3 4 3 4 poles 2 4 1 3 5 poles 2 4 1 3 5 DC 4 1 4 2 3 1 4 2 3 1 5 1 XS3 Wiring System Configuration Sensor End Using Sensors with Connectors Proximity Sensor (M8 Connector Models) Relay Cable Connector with Cable XS3W (screw-mounting models) E2E Proximity Sensor (Pre-wired Connector Models) XS3W (snap-in models) E2E Fiber Amplifier (Connector models) E3X Multiple XS3W (screw-mounting and snap-in models) can be used to extend the cable. Photoelectric Sensor (Connector models) Connector with Cable XS3F (screw-mounting models) E3Z Making Sensors with Cables (Sensor Manufacturers) Connector with Cable XS3H (screw-mounting models) XS3F (snap-in models) XS3H (snap-in models) Connectors with Cable Used to enable connectors (direct connection types) to be integrated with the Sensor body. XS3W (M8 to M12 Smartclick Conversion Cable) Sensor-embedded Connector XS3M (Embedded Model) 2 XS3 ( PCB Type indicates mating connectors, and indicates wiring connections.) Personal Computer PT (Programmable Terminal) Terminal Box Connector XS3P Y-Joint XS3R Host Link Cable Used to enable using connectors for terminal boxes. XW2Z Used to wire two Sensors to a single cable. Connector-Terminal Block Conversion Units XW2R (PLC, General-purpose devices) XW2D (slim model) XW2C (with power supply common terminal) XW2B (general-purpose model) XW2F (with screwless clamp terminals) Connecting Cable XW2Z Programmable Controller Crimp terminal wiring Terminal Block (Commercially Available) M12 Connector with Cable XS5F (Smartclick) XS2F (screw-on) Refer to your OMRON website for details on M12 Connectors with Cables. 3 XS3 XS3W Connectors with Cables, Connectors on Both Ends (Socket/Plug) M8 Screw-mounting Connectors with Vibration-proof Robot Cable XS3W-M@2@-@@@-R Dimensions (Unit: mm) Straight/Straight Connectors Straight/Right-angle Connectors M8 x 1.0 10 dia. Socket 4 dia. M8 x 1.0 Plug 4 dia. 9 dia. 21.1 10 dia. 9 dia. 32 31.4 L 31.4 23.1 L Right-angle/Straight Connectors Right-angle/Right-angle Connectors 9 dia. M8 x 1.0 9 dia. 10 dia. 4 dia. M8 x 1.0 4 dia. 21.1 20.5 20.5 10 dia. 23.1 23.1 23.1 32 L L S8 Snap-in Connectors with Vibration-proof Robot Cable XS3W-S42@-4@@-R Dimensions (Unit: mm) Straight/Straight Connectors Straight/Right-angle Connectors 4 dia. Socket Plug 8.2 dia. 4 dia. 19.8 8.2 dia. 8.2 dia. 8.2 dia. 30.7 30.7 L 23.1 30.7 L Right-angle/Right-angle Connectors Right-angle/Straight Connectors 8.2 dia. 8.2 dia. 8.2 dia. 4 dia. 4 dia. 19.8 19.8 19.8 8.2 dia. 23.1 23.1 L 23.1 30.7 L 4 XS3 Model Number Legend Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XS3W-@@2@-@@@-R 1 2 3 4 5 6 1. Fastening Method 3. Cable Connection Direction M: M8 S: S8 2. Connector Poles 3: 3 poles 4: 4 poles 1: Straight/ Straight 2: Right-angle/ Right-angle 3: Straight (socket)/ Right-angle (plug) 4: Right-angle (socket)/ Straight (plug) Mating Connectors 3 poles 4 1 Item Socket side XS3W (M8) XS3M (M8/S8) XS3H (M8) XS3W (S8) XS3M (M8/S8) XS3H (M8) Cable lead colors Pin No. 1 1 Brown 3 4 3 4 Blue Black 4 1 3 Plug Socket 5. Cable Length Pin No. 01: 1 m 02: 2 m 3: Brown Blue Black 05: 5 m Pin No. 4: Brown White Blue Black 6. Cable Specifications R: Vibration-proof robot cable Wiring Diagram/Engaged Side 3 4. Connections 4 poles Cable lead colors Pin No. 4 2 3 1 1 2 3 4 1 2 3 4 Brown White Blue Black 2 4 1 3 Plug side XS3F (M8) XS3W (M8) XS3P (M8) XS3F (S8) XS3W (S8) XS3P (S8) Note 1. Cables can be extended with more than one XS3W. 2. M8 screw models and S8 snap-in models cannot be connected to each other. Plug Socket Ordering Information M8 Screw-mounting Connectors No. of cable cores 3 Cable connection direction Straight/Straight Straight/Straight 4 Right-angle/Right-angle Straight (socket)/ Right-angle (plug) Right-angle (socket)/ Straight (plug) Cable length L (m) 1 2 5 1 2 5 2 5 2 5 2 5 Model XS3W-M321-301-R XS3W-M321-302-R XS3W-M321-305-R XS3W-M421-401-R XS3W-M421-402-R XS3W-M421-405-R XS3W-M422-402-R XS3W-M422-405-R XS3W-M423-402-R XS3W-M423-405-R XS3W-M424-402-R XS3W-M424-405-R Cable length L (m) 1 2 5 2 5 2 5 2 5 Model XS3W-S421-401-R XS3W-S421-402-R XS3W-S421-405-R XS3W-S422-402-R XS3W-S422-405-R XS3W-S423-402-R XS3W-S423-405-R XS3W-S424-402-R XS3W-S424-405-R S8 Snap-in Connectors No. of cable cores Cable connection direction Straight/Straight 4 Right-angle/Right-angle Straight (socket)/ Right-angle (plug) Right-angle (socket)/ Straight (plug) 5 XS3 XS3W Connectors with Cables, Connectors on Both Ends (M8 Socket/M12 Plug or M8 Plug/M12 Socket) Screw-on Connectors (M8 to M12) XS3W-M@2@-@C2-A Dimensions (Unit: mm) XS3W-M32C-3C2-A, XS3W-M42C-4C2-A 200 44.7 2 31.4 (3 cores) 1 14.9 dia. 3 9 dia. 4 4 dia. Plug 1 3 4 Socket M12x1.0 M8x1.0 (4 cores) 1 3 2 4 M8x1.0 XS3W-M32D-3C2-A, XS3W-M42D-4C2-A 200 40.7 1 32 (3 cores) 2 3 14.9 dia. 4 3 4 dia. Socket M12x1.0 1 10 dia. 4 Plug M8x1.0 (4 cores) 3 1 4 2 M8x1.0 Note: For 3-core, M12 connectors, pin 2 is not connected internally. For the M12 connectors, one-touch (Smartclick) connectors that are compatible with previous screw-on M12 connectors are used. Refer to your OMRON website for details. XS5 Series Clic k! Insert fully. Rotate 1/8 turn. One-touch Connection is a registered trademark of the OMRON Corporation. 6 XS3 Model Number Legend Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XS3W-M@2@-@C2-A 1 2 3 4 5 6 1. Fastening Method 3. Cable Connection Direction M: M8 2. Connector Poles 3: 3 poles 4: 4 poles C: M8 (screw-on) socket: Straight, M12 (Smartclick) plug: Straight D: M8 (screw-on) plug: Straight, M12 (Smartclick) socket: Straight 4. Connections 5. Cable Length Pin No. C2: 20 cm 3: Brown Blue Black 6. Cable Specifications Pin No. A: Standard cable 4: Brown White Blue Black Wiring Diagram 3 poles 4 poles Cable lead colors Pin No. 1 1 Brown 3 4 3 4 Blue Black Cable lead colors Pin No. 1 2 3 4 1 2 3 4 Brown White Blue Black Ordering Information No. of cable cores 3 4 Connectors M8 socket/M12 plug M8 plug/M12 socket M8 socket/M12 plug M8 plug/M12 socket Cable length L (m) 0.2 Model XS3W-M32C-3C2-A XS3W-M32D-3C2-A XS3W-M42C-4C2-A XS3W-M42D-4C2-A 7 XS3 XS3F Sockets on One Cable End M8 XS3F-M32@-3@@-@ 3 pin Screw-on Cables with Vibration-proof Robot Cable/Standard Cable Dimensions (Unit: mm) Straight Connectors M8 x 1.0 4 dia. 4 3 1 9 dia. 1.75 21.5 3.5 30 5 50 31.4 L 50 L Right-angle Connectors 4 dia. 23.1 30 5 20.5 9 dia. 1 4 3.5 Wiring Diagram 3 1.75 M8 x 1.0 M8 Pin No. Cable lead colors 1 Brown 3 4 Blue Black XS3F-@42@-4@@-@ 4 pin Screw-on Cables with Vibration-proof Robot Cable/Standard Cable Dimensions (Unit: mm) Straight Connectors 2.15 M8 x 1.0 4 dia. 12.9 4 2 3 1 9 dia. 1.95 0.5 21.5 3.4 30 5 50 31.4 L Right-angle Connectors 50 L 23.1 20.5 30 5 4 dia. 9 dia. 2 1 Wiring Diagram 3.4 4 2.15 M8 x 1.0 Pin No. 3 0.5 1.95 1 2 3 4 Cable lead colors Brown White Blue Black 8 XS3 M8 XS3F-M52@-5@@-A 5 pin Screw-on Cables with Standard Cable Dimensions (Unit: mm) Straight Connectors 1.95 M8 x 1.0 4.7 dia. 2 1.45 4 1.35 1 3 5 9 dia. 0.35 21.5 3.4 30 L 4.7 dia. 24.9 Right-angle Connectors 5 50 L 31.4 20.5 5 30 50 9 dia. M8 x 1.0 0.35 2 Wiring Diagram 1 Pin No. 5 Cable lead colors 3.4 1.95 4 3 2 1.35 1.45 4 Brown White Blue Black Gray 1 3 5 S8 Snap-in Connectors with Vibration-proof Robot Cable XS3F-S42@-4@@-R Dimensions (Unit: mm) Straight Connectors 2.15 4 dia. 13.9 4 2 3 1 8.2 dia. 1.95 0.5 21.1 3.4 30 5 50 30.7 L Right-angle Connectors 50 L 23.1 30 5 19.8 4 dia. Wiring Diagram 8.2 dia. 2 1 Pin No. 3.4 4 2.15 3 0.5 1.95 1 2 3 4 Cable lead colors Brown White Blue Black 9 XS3 Model Number Legend Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XS3F-@@2@-@@@-@ 1 2 3 1. Fastening Method M: M8 S: S8 E: M8 SUS316L Lock 2. Connector Poles 3: 3 poles 4: 4 poles 5: 5 poles 4 5 6 3. Cable Connection Direction 1: Straight 2: Right-angle 4. Connections 5. Cable Length 01: 1 m 02: 2 m 05: 5 m 10: 10 m Pin No. 6. Cable Specifications 3: Brown Blue Black A: Standard cable Pin No. R: Vibration-proof robot cable 4: Brown White Blue Black Pin No. 5: Brown White Blue Black Gray Mating Connectors Item XS3F(M8) XS3F(S8) Model XS3M (M8/S8), XS3H (M8), XS3W (M8) XS3M (M8/S8), XS3H (M8), XS3W (M8) Note: M8 screw models and S8 snap-in models cannot be connected to each other. 10 XS3 Ordering Information M8 Screw-on Cables No. of cable cores Item Standard cable 3 Vibration-proof robot cable Standard cable 4 Vibration-proof robot cable Standard SUS316L cable lock 5 Standard cable Cable connection direction Cable length L (m) 2 Straight 5 2 Right-angle 5 2 Straight 5 2 Right-angle 5 2 Straight 5 2 Right-angle 5 1 Straight 2 5 1 Right-angle 2 5 2 Straight 5 2 Right-angle 5 2 Straight 5 10 2 Right-angle 5 10 Model XS3F-M321-302-A XS3F-M321-305-A XS3F-M322-302-A XS3F-M322-305-A XS3F-M321-302-R XS3F-M321-305-R XS3F-M322-302-R XS3F-M322-305-R XS3F-M421-402-A XS3F-M421-405-A XS3F-M422-402-A XS3F-M422-405-A XS3F-M421-401-R XS3F-M421-402-R XS3F-M421-405-R XS3F-M422-401-R XS3F-M422-402-R XS3F-M422-405-R XS3F-E421-402-A XS3F-E421-405-A XS3F-E422-402-A XS3F-E422-405-A XS3F-M521-502-A XS3F-M521-505-A XS3F-M521-510-A XS3F-M522-502-A XS3F-M522-505-A XS3F-M522-510-A S8 Snap-in Connectors No. of cable cores 4 Item Vibration-proof robot cable Cable connection direction Cable length L (m) 1 Straight 2 5 1 Right-angle 2 5 Model XS3F-S421-401-R XS3F-S421-402-R XS3F-S421-405-R XS3F-S422-401-R XS3F-S422-402-R XS3F-S422-405-R 11 XS3 XS3H Plugs on One Cable End M8 3 pin Screw-on Connectors with Vibration-proof Robot Cable XS3H-M321-3@@-R Dimensions (Unit: mm) Straight Connectors M8 x 1.0 4 dia. 4 3 1 10 dia. 1.75 21.5 3.5 30 5 50 32 L Wiring Diagram Pin No. Cable lead colors 1 Brown 3 4 Blue Black M8 4 pin Screw-on Connectors with Vibration-proof Robot Cable XS3H-M42@-4@@-R Dimensions Straight Connectors (Unit: mm) Four, 1 dia. 2.15 M8 x 1.0 2 4 1 3 4 dia. 12.9 10 dia. 1.95 0.5 21.5 3.4 30 5 50 32 L Right-angle Connectors 50 L 23.1 30 20.1 5 4 dia. M8 x 1.0 Wiring Diagram 10 dia. Four, 1 dia. 4 3 Pin No. 3.4 2.15 2 1 0.5 1.95 1 2 3 4 Cable lead colors Brown White Blue Black 12 XS3 S8 4 pin Snap-in Connectors with Vibration-proof Robot Cable XS3H-S42@-4@@-R Dimensions Straight Connectors (Unit: mm) Four, 1 dia. 2.15 4 dia. 13.9 2 4 1 3 8.2 dia. 1.95 0.5 21.1 3.4 30 5 50 30.7 L 50 L Right-angle Connectors 23.1 30 5 19.8 4 dia. Four, 1 dia. 8.2 dia. 4 3 3.4 2.15 2 1 0.5 1.95 13 XS3 Model Number Legend Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XS3H-@@2@-@@@-R 1 2 3 1. Fastening Method 4 5 6 3. Cable Connection Direction M: M8 S: S8 1: Straight 2: Right-angle 2. Connector Poles C3: 0.3 m 01: 1 m 4. Connections 3: 3 poles 4: 4 poles 5. Cable Length 6. Cable Specifications Pin No. 3: Brown Blue Black Pin No. 4: Brown White Blue Black R: Vibration-proof robot cable Mating Connectors Item XS3H(M8) XS3H(S8) Model XS3F (M8), XS3W (M8), XS3P (M8) XS3F (S8), XS3W (S8), XS3P (S8) Note: M8 screw models and S8 snap-in models cannot be connected to each other. Ordering Information M8 Screw-on Connectors No. of cable cores Cable connection direction 3 Straight Straight 4 Right-angle Cable length L (m) 0.3 1 0.3 1 0.3 1 Model XS3H-M321-3C3-R XS3H-M321-301-R XS3H-M421-4C3-R XS3H-M421-401-R XS3H-M422-4C3-R XS3H-M422-401-R Cable length L (m) 0.3 1 0.3 1 Model XS3H-S421-4C3-R XS3H-S421-401-R XS3H-S422-4C3-R XS3H-S422-401-R S8 Snap-in Connectors No. of cable cores Cable connection direction Straight 4 Right-angle 14 XS3 XS3P Panel-mounting Sockets for Terminal Boxes M8 Screw-mounting Sockets with DIP Pins M8 Screw-mounting Sockets with Solder Cup Pins M8 Screw-mounting Sockets with Solder Cup Pins XS3P-M421-1 XS3P-M421-2 XS3P-M422-2 Dimensions (Unit: mm) XS3P-M421-1 (DIP Pins) Front lock or rear lock 1.8 Four, 1 dia. 1.95 XS3P-M421-2 (Solder Cup Pins) Front lock or rear lock 16 7.2 2.15 24.9 12.5 7.2 1.8 16 2.15 0.5 0.5 M12 x 1.0 2.5 18 dia. 3.4 M12 x 1.0 1.5 M12 x 1.0 nut 9.4 1.95 1.95 2.15 1.2 dia. 0.5 Solder cup hole 0.8 dia. x 2.5 M12 x 1.0 1.5 M12 x 1.0 9.4 9.7 Rubber bushing 24.3 12.5 7.2 0.5 18 dia. 3.4 M8 x 1.0 3.4 7.2 2.15 2.5 M12 x 1.0 nut 1.95 M8 x 1.0 3.4 9.7 Rubber bushing XS3P-M422-2 (Solder Cup Pins), Rear Lock Slim Models 10 13.2 2 7 (0.3) 2.15 6 1.95 11.5 dia. M8 x 0.5 M8 x 0.5 nut 2 M8 x 1.0 Rubber bushing 3.4 10 S8 Snap-in Sockets with DIP Pins S8 Snap-in Sockets with Solder Cup Pins XS3P-S421-1 XS3P-S421-2 Dimensions (Unit: mm) XS3P-S421-2 (Solder Cup Pins) Front lock or rear lock XS3P-S421-1 (DIP Pins) Front lock or rear lock Four, 1 dia. 1.8 16 7.2 2.15 1.95 24.9 12.5 7.2 1.8 16 2.15 0.5 0.5 M12 x 1.0 2.5 18 dia. 3.4 9.4 M12 x 1.0 nut M12 x 1.0 1.5 Rubber bushing 1.95 1.95 9.5 24.3 12.5 7.2 2.15 1.2 dia. 0.5 Solder cap hole 0.8 dia. x 2.5 18 dia. 3.4 3.4 7.2 2.15 9.4 M12 x 1.0 2.5 M12 x 1.0 nut 0.5 M12 x 1.0 1.5 Rubber bushing 1.95 3.4 9.5 15 XS3 Mounting Dimensions for XS3P Screw-on Models and Snap-in Models Panel Cutouts XS3P-@421-@ PCB-mounting Dimensions XS3P-M422-2 +0.2 9.8 0 Land 24 min. 2.15 +0.2 0 8.2 +0.2 12 0 dia. Panel-mounting Dimensions Rear Lock (Unit: mm) Front Lock Panel Panel 0.5 1.95 Four, 1.2 dia. 3.4 24 min. +0.2 0 7.2 Note: The panel thickness is 1 to 3 mm. Note: The panel thickness is 2.4 mm maximum. Nut Rubber bushing Rubber bushing Nut Mating Connectors Item XS3P(M8) XS3P(S8) Model XS3H (M8), XS3W (M8) XS3H (S8), XS3W (S8) Note: M8 screw models and S8 snap-in models cannot be connected to each other. Ordering Information Connection method M8 screw-mounting Panel mounting Front lock or rear lock Rear lock S8 snap-in Front lock or rear lock Pin shape DIP pins Solder cup pins Solder cup pins DIP pins Solder cup pins Applicable wires --AWG24 max. AWG24 max. --AWG24 max. Model XS3P-M421-1 XS3P-M421-2 XS3P-M422-2 XS3P-S421-1 XS3P-S421-2 Minimum order 50 Note: Orders are accepted in multiples of the minimum order. Safety Precautions In addition to the following information, also refer to Safety Precautions on page 21 Precautions for Correct Use Panel Mounting * When mounting XS3P Panel-mounting Connectors to panels, refer to Panel-mounting Dimensions and provide rubber bushings and nuts for the Connectors. Apply a tightening torque of between 0.4 and 0.6 N*m to mount the Connectors. 16 XS3 XS3M Sensor Embedded Plugs Embedded Plugs with Screw Threads and DIP Pins Embedded Plugs with Screw Threads and Solder Cup Pins XS3M-K421-1 XS3M-K421-2 Dimensions (Unit: mm) XS3M-K421-1 Embedded Model with DIP Pins Mounting Dimensions 1 dia. Four, 1 dia. 4 M8 x 1.0 2 2 4 5.8 dia. 6.5 dia. 6.9 dia. 6.5 dia. 5.80.2 dia. 3 2.15 Four, 1 dia. 0.4 5.8 1 1 5.6 dia. 3.6 3 2 Resin filled 3.4 3 3 6.75 +0.05 dia. 0 0.5 1.95 7.2 (min) 10.3 XS3M-K421-2 Embedded Model with Solder Cup Pins M8 x 1.0 1 dia. Four, 1 dia. 4 2 2 6.5 dia. 5.80.2 dia. 3 2.15 0.4 Mounting Dimensions Four, 1 dia. 4 5.8 dia. 6.5 dia. 6.9 dia. 5.8 1 1 5.6 dia. Solder cup hole 0.7 dia. x 1.7 1.7 3 2 3 3 6.75 3.4 +0.05 dia. 0 0.5 1.95 Resin filled 5.2 (min) 10.3 Mating Connectors Item XS3M Model XS3F (M8/S8), XS3W (M8/S8) Note: The plug can be connected to both M8 screw and S8 snap-in models. Ordering Information Connection method Embedded model Pin shape DIP pins Solder cup pins Applicable wires --AWG26 max. Model XS3M-K421-1 XS3M-K421-2 Minimum order 200 Note: Orders are accepted in multiples of the minimum order. 17 XS3 XS3M Panel-mounting Plugs Front lock DIP pins (5 pins) XS3M-M524-@@ Dimensions (Unit: mm) XS3M-M524-10 Front Lock with DIP Pins 4.5 mm (for Either Round Holes or Solder Cups), Without Shield Pin Panel Cutout +0.1 0 PCB-mounting Dimensions 3.4 +0.1 0 8.2 mm dia. 7.1 Five, 1.7 dia. lands 1.95 Five, 1.2 dia. O-ring on panel side* 2-1.45 2 1.35 1 3.4 M8 x 1.0 1.95 11.9 dia. 1.45 5-1 dia. 0.35 *The O-ring on the panel side maintains a waterproof structure (IP67) between the panel and Connector. 1.35 0.35 SW7 6 min. SW10 Pin Numbers 3.4 12 1.45 1.35 Note: The panel thickness is 2.4 mm maximum. O-ring on panel side* 1.95 3 5 2-0.35 Note: The panel thickness is 0.8 to 2 mm. 4 SW11 5-4.5 7.05 (2.5) Panel location (example for t = 2.0) XS3M-M524-11 Front Lock with DIP Pins 4.5 mm (for Either Round Holes or Solder Cups), With Shield Pin Panel Cutout PCB-mounting Dimensions 10.4 3.4 1.95 +0.1 0 +0.1 0 8.2 mm dia. Two, 1.2 lands 2-0.7 4-R0.6 4-R0.35 Five, 1.7 dia. lands 7.1 Five, 1.2 dia. 2-1.45 2 4 Two, 3.8 lands 1 1.35 O-ring on panel side* Two, 3.3 lands 2-0.35 Note: The panel thickness is 0.8 to 2 mm. 3.4 1.95 M8 x 1.0 Note: The panel thickness is 2.4 mm maximum. O-ring on panel side* 5-4.5 12 1.95 11.9 dia. 5-1 dia. 1.45 2-2.6 0.35 1.35 0.35 SW7 6 min. SW10 7.05 Pin Numbers 10.4 3.4 1.45 1.35 3 5 2-4.5 SW11 *The O-ring on the panel side maintains a waterproof structure (IP67) between the panel and Connector. (2.5) Panel location (example for t = 2.0) Mating Connectors Item XS3M-M524-1@ Model XS3F-M52@-5@@-A Ordering Information Lock method Front lock Pin shape DIP pins 4.5 mm (for either round holes or solder cups) Shield pin Applicable wires No Model XS3M-M524-10 AWG26 max. Yes XS3M-M524-11 Note: Orders are accepted in multiples of the minimum order. 18 XS3 Safety Precautions In addition to the following information, also refer to Safety Precautions on page 21 Precautions for Correct Use XS3M-M524-@@ Mating To mate the Connectors, align the mating marks on the Plug and Socket (see following figure), insert the Connectors completely, and tighten the lock nut, being careful not to damage the threads. Plug Mating marks Socket XS3M-M524-@@ Panel Mounting After you mount the Connector to the panel, attach the nut and tighten it to a suitable torque (0.4 N*m). XS3 M8/S8 Connector Cover Dust Cover XS3Z-13 XS3Z-13 M8 Plug XS3Z-15 XS3Z-15 M8 Socket S8 Socket S8 Plug Model XS3Z-13 XS3Z-15 Material PVC resin/red The Dust Cover is for dust prevention and does not ensure IP67. When mounting the Dust Cover to a Connector, be sure to press the Dust Cover onto the Connector until the Connector is fully inserted into the Dust Cover. Suitable connector Model Mounting portion XS3H/XS3W/XS3R M8 plug XS3F/XS3W S8 socket XS3H/XS3W S8 plug XS3M M8/S8 plug XS3F/XS3W/XS3R M8 socket 19 XS3 XS3R Y-Joint Plug/Socket Connectors Screw-on Models (M8) XS3R-M426-1@@@-A XS3R-M426-@ With Standard Cable: Without Cable: Dimensions (Unit: mm) XS3R-M426-1@@1-A Connectors on Both Cable Ends (Y-Joint Plug/Socket) 4 3 9 dia. dia . Plug 4 dia. 10 dia. 3 1 12.5 4 5.6 dia. 23 9 dia. 4 2 16.4 Socket CN2 3.5 1 M8 x 1.0 2 10.5 1 2 CN1 3 1 4 2 CN0 32 M8 x 1.0 L XS3RM426-1@@0-A 3 1 12.5 4 3 . 9 dia. 9 dia. dia 4 4 dia. 5.6 dia. 4 2 16.4 Socket CN2 3.5 1 M8 x 1.0 2 10.5 1 23 2 CN1 30 5 50 L XS3R-M426-@ Connector on Both Ends (Y-Joint Plug/Socket) without Cable CN2 9 dia. 23 16.4 4 dia . Socket 3.5 1 M8 x 1.0 Plug 3 1 12.5 4 2 3 2 3 4 10 dia. CN0 9 dia. 4 1 2 10.5 CN1 1 2 M8 x 1.0 37.2 Wiring Diagram XS3R-M426-1@@1-A CN2 CN1 1 2 3 4 1 2 3 4 XS3R-M426-1@@0-A CN2 4 3 2 1 CN1 XS3R(M8) Model XS3F(M8) XS3H(M8) XS3W(M8) XS3P(M8) XS3R-M426-1 CN2 Black Blue White Brown CN0 Mating Connectors Item 1 2 3 4 1 2 3 4 CN1 Lead color XS3R-M426-5 1 2 3 4 CN2 4 3 2 1 1 2 3 4 1 2 3 4 CN0 CN1 1 2 3 4 4 3 2 1 CN0 Ordering Information For M8 Connectors Cable With cable Connector Connectors on both cable ends Connector on one cable end Without cable Connectors on both cable ends Cable length L (m) 0.5 1 2 3 2 5 --- Model XS3R-M426-1C51-A XS3R-M426-1011-A XS3R-M426-1021-A XS3R-M426-1031-A XS3R-M426-1020-A XS3R-M426-1050-A XS3R-M426-1 XS3R-M426-5 Minimum order 5 10 20 XS3 Safety Precautions Precautions for Correct Use Do not use the product in atmospheres or environments that exceed product ratings. Connections * The XS3 and XS2 Sensor I/O Connectors cannot be connected to each other. * You cannot mate Connectors that have a different number of poles. * When using Sensors with Connectors or Limit Switches, use the Sensor I/O Connectors specified in the catalog. * Do not connect M8 screw models and S8 snap-in models together, otherwise the proper degree of protection of the Connectors will not be maintained. Connector Connection and Disconnection * Before connecting or disconnecting Connectors, make sure that no power is being supplied to the Connectors. * When connecting or disconnecting Connectors, be sure to hold the Connectors by hand. Do not disconnect the Connectors by pulling the cable. * Do not touch the engagement side of any Connector with wet hands. If there is any water on the Connector or near the Connector, be sure to wipe off the water before connecting or disconnecting the Connector, otherwise the Connector may short-circuit internally or not ensure good insulation. * Make sure that engagement side of any Connector is free of metal dust or power. * Do not use pliers to tighten mounting the thread bracket, otherwise the thread bracket may be damaged. Be sure to tighten each thread bracket by hand within a torque of 0.2 N*m. If the thread bracket is not tightened securely, the Connector may not maintain its proper degree of protection or the thread bracket may fall off due to vibration. * When you tighten or loosen a lock nut, hold onto only the lock nut. If you hold onto the cover or cable, excessive rotational force will be applied to the Connector and may damage it. * Fully insert S8 snap-in models until the Connectors are hidden by the metal casing of the opposite parts, otherwise the Connectors will not maintain their proper degree of protection or the thread brackets may become loose due to vibration. Degree of Protection * Do not impose external force continuously on the joints of pin blocks and covers, otherwise the Connectors may not keep its proper degree of protection (i.e., IP67). * Connectors are not fully watertight. Do not use them underwater. * The Connectors are not oil-resistant. Do not use them where they would be subject to oil. * If Connectors are used in places with vibration or shock, secure the engaged side of each Connector, otherwise the Connectors may be disconnected or fail to maintain their proper degree of protection. * Connectors are of resin mold construction. Do not impose excessive force on them. Storage Do not store Connectors for long periods of time in the following locations * Locations subject to dust or high humidity * Locations subject to ammonia gas or sulfide gas Installation * Do not make any cable bends near the base of the Unit. * Any bends made must have a minimum radius of 36 mm. 21 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron's sole obligation hereunder shall be, at Omron's election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron's analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer's application or use of the Product. At Buyer's request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user's programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron's test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron's Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron's representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2014.9 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2014 All Right Reserved. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Omron: XS3F-M422-402-A XS3F-M421-402-A XS3F-M421-405-A XS3F-M421-402-R XS3F-M421-405-R XS3F-M422-402R XS3F-M422-405-R XS3W-M421-405-R XS3W-M422-402-R XS3W-M422-405-R XS3H-M421-4C3-R XS3W-S421401-R XS3F-M422-405-A