MB6S - KEC Corporation

2005. 6. 1 1/2Revision No : 0

FEATURES

·Plastic package has Underwriters Laboratory flammability

Classification 94V-0.

·Glass passivated chip junction.

·High surge overload rating : 35A peak.

·Saves space on printed circuit boards.

·High temperature soldering guaranteed : 260℃/10 seconds.

MAXIMUM RATING (Ta=25℃)

SEMICONDUCTOR

TECHNICAL DATA

MB6S

Single-Phase Bridge Rectifiers

ELECTRICAL CHARACTERISTICS (Ta=25℃)

CHARACTERISTIC SYMBOL RATING UNIT

repetitive peak reverse voltage VRRM 600 V

RMS voltage VRMS 420 V

DC blocking voltage VDC 600 V

Average forward output rectified

current (see Fig.1) On glass-epoxy

P.C.B on aluminum substrate.

IF(AV)

0.5 (Note1)

0.8 (Note2) A

Peak forward surge current IFSM 35.0 A

Rating for fusing (t<8.3ms) I2t 5.0 A2sec

Operating Junction and

Storage Temperature Range Tj, Tstg -55~150 ℃

CHARACTERISTIC SYMBOL CONDITION MIN TYP MAX UNIT

Forward voltage VFIF=0.4A - - 1.0 V

Leakage current Ta=25℃IRVR=600V - - 5.0 μA

Ta=125℃- - 100

Junction capacitance CJVR=4.0V, f=1.0MHz - 13 - pF

Typical thermal resistance

Rth(A)

(Note1) Junction to ambient - -

℃/W

Rth(A)

(Note2) 70

Rth(L)

(Note1) Junction to lead - - 20

Note 1) on glass epoxy P.C.B mounted on 0.05×0.05󱄦(1.3×1.3mm) Pads.

Note 2) on aluminum substrate P.C.B with an area of 0.8×0.8󱄦(20×20mm) mounted on 0.05×0.05󱄦(1.3×1.3mm) solder pad.