© Semiconductor Components Industries, LLC, 2001
October, 2020 − Rev. 5
1Publication Order Number:
RURG5060/D
Ultrafast Diode
50 A, 600 V
RURG5060
Description
The RURG5060 is an ultrafast diode with low forward voltage drop.
This device is intended for use as freewheeling and clamping diodes in
a variety of switching power supplies and other power switching
applications. It is specially suited for use in switching power supplies
and industrial application.
Features
•Ultrafast Recovery ( trr = 75 ns (@ IF = 50 A )
•Max Forward Voltage( VF = 1.6 V (@ TC = 25 °C )
•600 V Reverse Voltage and High Reliability
•Avalanche Energy Rated
•This Device is Pb−Free and is RoHS Compliant
Applications
•Switching Power Supplies
•Power Switching Circuits
•General Purpose
ABSOLUTE MAXIMUM RATINGS (TC = 25°C unless otherwise noted)
Rating Symbol Value Unit
Peak Repetitive Reverse Voltage VRRM 600 V
Working Peak Reverse Voltage VRWM 600 V
DC Blocking Voltage VR600 V
Average Rectified Forward Current
(TC = 102 °C)
IF(AV) 50 A
Repetitive Peak Surge Current
(Square Wave, 20 kHz)
IFRM 100 A
Nonrepetitive Peak Surge Current
(Halfwave 1 Phase, 60 Hz)
IFSM 500 A
Maximum Power Dissipation PD150 W
Avalanche Energy
(See Figure 7 and Figure 8)
EAVL 40 mJ
Operating and Storage Temperature TSTG, TJ−65 to
+175
°C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
www.onsemi.com
JEDEC STYLE 2 LEAD TO−247
340CL
MARKING DIAGRAM
$Y&Z&3&K
RURG5060
See detailed ordering and shipping information on page 2 of
this data sheet.
ORDERING INFORMATION
CATHODE
ANODE
$Y = ON Semiconductor Logo
&Z = Assembly Plant Code
&3 = Numeric Date Code
&K = Lot Code
RURG5060 = Specific Device Code
1. Cathode 2. Anode
CATHODE
(BOTTOM
SIDE METAL)
RURG5060
www.onsemi.com
2
PACKAGE MARKING AND ORDERING INFORMATION
Part Number Package Brand
RURG5060 TO−247−2L RURG5060
ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted)
Symbol Parameter Test Conditions Min Typ Max Unit
VFInstantaneous Forward Voltage
(Pulse Width = 300 ms, Duty Cycle = 2%)
IF = 50 A 1.6 V
IF = 50 A,
TC = 150°C
1.4 V
IRInstantaneous Reverse Current VR = 600 V 250 mA
VR = 600 V
TC = 150°C
1.5 mA
Trr Reverse Recovery Time at dIF/dt = 100A/ms (See Figure 6 )
Summation of ta + tb
IF = 1 A,
dlF/dt = 100 A/ms
65 ns
IF = 50 A,
dIF/dt = 100 A/ms
75 ns
taTime to Reach Peak Reverse Current at dIF/dt = 100A/ms
(See Figure 6)
IF = 50 A,
dIF/dt = 100 A/ms
30 ns
tbTime from Peak IRM to Projected Zero Crossing of IRM
Based on a Straight Line from Peak IRM Through 25%
of IRM (See Figure 6)
IF = 50 A,
dIF/dt = 100 A/ms
20 ns
RqJC Thermal Resistance Junction to Case 1.0 °C/W
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
RURG5060
www.onsemi.com
3
TYPICAL PERFORMANCE CURVES
Figure 1. Forward Current vs. Forward Voltage Figure 2. Reverse Current vs. Reverse Voltage
Figure 3. Trr, ta and tb Curves vs. Forward Current Figure 4. Current Derating Curve
IR, Reverse Current (mA)
VR, Reverse Voltage (V)
IF
, Forward Current (A)
VF
, Forward Voltage (V)
IF(AV), Average Forward Current (A)
TC, Case Temperature (5C)
t, Times (ns)
IF
, Forward Current (A)
300
100
10
1
0
175oC
100oC
25oC
0.5 1.0 1.5 2.0 2.5
1000
100
10
1.0
0.1
0.01
0 100 200 300 400 600
175oC
100oC
25oC
500
60
50
40
30
20
10
0
110
60
trr
ta
tb
60
50
40
30
20
10
060 80 100 120 140 160 180
SQ. WAVE
DC
RURG5060
www.onsemi.com
4
TEST CIRCUITS AND WAVEFORMS
Figure 5. Trr Test Circuit Figure 6. Trr Waveforms and Definitions
Figure 7. Avalanche Energy Test Circuit Figure 8. Avalanche Current and Voltage Waveforms
I = 1.4 A
L = 40 mH
R < 0.1 W
EAVL = 1/2LI2 [VR(AVL)/(VR(AVL)−VDD)]
Q1 = IGBT (BVCES > DUT VR(AVL))
IRM
RG
L
VDD
IGBT
CURRENT
SENSE
DUT
GE
t1
t2
+
−
dt
dIF
IF
Trr
tatb
0
0.25IRM
DUT
CURRENT
SENSE
+
LR
VDD
−
VDD
Q1I
t0t1t2
IL
VAVL
t
IL
VGE AMPLITUDE AND
RG CONTROL dlF/dt
t1 AND t2 CONTROL IF
V
V
XXXX = Specific Device Code
A = Assembly Location
Y = Year
WW = Work Week
ZZ = Assembly Lot Code
*This information is generic. Please refer to
device data sheet for actual part marking.
Pb−Free indicator, “G” or microdot “G”, may
or may not be present. Some products may
not follow the Generic Marking.
GENERIC
MARKING DIAGRAM*
AYWWZZ
XXXXXXX
XXXXXXX
TO−247−2LD
CASE 340CL
ISSUE A
DATE 03 DEC 2019
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically
disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the
rights of others.
98AON13850G
DOCUMENT NUMBER:
DESCRIPTION:
Electronic versions are uncontrolled except when accessed directly from the Document Repository.
Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red.
PAGE 1 OF 1
TO−247−2LD
© Semiconductor Components Industries, LLC, 2018 www.onsemi.com
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
TECHNICAL SUPPORT
North American Technical Support:
Voice Mail: 1 800−282−9855 Toll Free USA/Canada
Phone: 011 421 33 790 2910
LITERATURE FULFILLMENT:
Email Requests to: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Europe, Middle East and Africa Technical Support:
Phone: 00421 33 790 2910
For additional information, please contact your local Sales Representative
◊
