CHINA Operations!
tel: +86-756-6266298"
No. 8 Pingdong Road 2"
Zhuhai, Guangdong, China 519060"
SaveEnergy@erp-power.com!
USA Headquarters !
tel: +1-805-517-1300"
893 Patriot Drive, Suite E"
Moorpark, CA 93021, USA "
www.erp-power.com!
• Non-linear 0-10V dimming profile with dim-to-off (10V to
9.1V=100%, 1.5V to 0.6V=1%, <0.6V=dim-to-off)"
• Auxiliary output 12 V/100 mA"
• IP66-rated case with silicone-based potting"
• Surge protection: "
• IEC61000-4-5: 4 kV line to line/4 kV line to earth"
• 2.5 kV ring wave: ANSI/IEEE c62.41.1-2002 & c62.41.2-2002
category A"
• Ripple: 25%"
• Protections: Output open load, over-current and short-circuit
(hiccup), over-power, over-temperature with foldback and auto-
recovery"
• Conducted and radiated EMI: Compliant with FCC CFR Title 47
Part 15 Class A at 120 Vac & 277 Vac and EN55015 (CISPR 15)
at 220/230/240 Vac"
• Lifetime: 50,000 hours @ Tc = 70°C"
• 90°C maximum case hot spot temperature"
• UL Class P"
BASE FEATURES"
260 W Programmable Constant Current LED Driver "
with 0-10 V Dimming !
260 W!
PDB260!
Series!
5
Input
Voltage
Max. Output
Power
Efficiency
Max. Case
Temperature
THD Power Factor
Dimming Type
and Range
Startup
Time
120 to
277 Vac
nominal
260 W
up to 93%
typical
90°C
(measured at
the hot spot)
< 20%
(from 100% to 50%
of max rated power
> 0.9
(from 100% to 50%
of max rated power)
0 - 10V,
1 -100%
(% of Iout)
500 ms
typical
Aluminum Case!
L 217/240.5 x W 50.8 x H 38.5 mm"
(L 8.54/9.47 x W 2.00 x H 1.52 in)"
PDB260!
series!LEDs +!
LEDs -!
Dim +!
Dim -!
Aux +!
Aux -!Sensor%
0-10 V
Dimmer
Ordering Part
Number
Nominal
Input
Voltage
(Vac)
Max
Output
Power
(W)
Iout 1
(mA)
Vout 1
(Vdc)
Iout 2
(mA)
Vout 2
(Vdc)
PDB260W-0860-400 120 to 277
260 430 to 860 228 to 300 325 to 650 304 to 400
PDB260W-1300-280 120 to 277 260 650 to 1300 152 to 200 465 to 930 213 to 280
PDB260W-1700-210 120 to 277 260 850 to 1700 114 to 150 620 to 1240 160 to 210
PROGRAMMING"
• Dual output voltage range selection"
• Serial port programming"
• Current: 100% to 50% in each voltage range"
• Data log read: SKU, S/N, lot code, hours of operation,
FW rev., fault events: power failure, transients (short or
surge), thermal"
!
OPTIONS"
• Ripple <10% @ 120 Hz & <8% @ 120 Hz (IEEE1789)"
• Auxiliary output: up to 24 V / down to 3.3 V / up to 500 mA"
• Alternate 0-10V dimming profiles: Linear, Logarithmic,!
Ballast type Mark7 (IEC60929, ANSI C82.11)"
• Energy metering (as part of future software upgrade)"
APPLICATIONS"
• Street Lights "! Industrial LED Lighting"
• Wide-area Lighting "! Outdoor lighting"
For additional options of output current and output voltage, contact your sales representative or send an
email to: SaveEnergy@erp-power.com!
