FH12-16S-0.5SHA(55) - Hirose Electric

6

0.5mm and 1mm Pitch Connectors For FPC/FFC

FH12 Series

■Features

1. Ease of Use and Space Savings

Only one finger or 6.9N (Newtons) of force is required to

lock Hirose’s rotational actuator (flip-lock) as compared

to using 2 fingers and 39.2N to close a FFC/FPC

connector from our competition.

The Flip-Lock design also allows customers to place 2

or more connectors side by side as there is no need to

waste additional board space for a side latch.

2. Strengthened Flip-lock Actuator

The standard Flip-Lock requires only 2.0mm height

above the board. A strengthened lock lever is available

which only requires an additional 0.4mm.

3. Supports Thin FPC (0.18mm)

Hirose does not require double-sided FPC to have any

additional strengthening plate or stiffener and can therefore

support a thickness of as little as 0.18mm +/- 0.05.

4.

Hirose Ensures Reliability

Hirose’s patented half tuning fork contacts maintain the

required normal force without relying on the connector

housing. With our competitor’s conventional products

the housing walls support the contact force, which does

not provide for long-term reliability.

5. Prevention of Solder Bridge

Excess solder cavity absorbs excessive solder and

avoids solder bridging.

6. Three different assembly types

FH12 is offered in Top & Bottom Contact and Vertical

Mount and offered in both a 0.5mm contact pitch as well

as a 1.0mm contact pitch (bottom contact only).

■Applications

Notebook computers, printers, PDAs, digital cameras and

other compact devices for interconnecting the main circuit

board with the LCD, HDD or other device.

Rotating One-touch Mechanism

q

w

e

Flip-lock

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

7

FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC

■Product Specifications

Rating

Current rating: 0.5A DC(Note 1)

Operating Temperature Range:_40 to +70ç (Note 2)

Storage Temperature Range:_10 to +50ç (Note 3)

Voltage rating: 50V AC Operating Humidity Range:Relative humidity, 90% max.

Storage Humidity Range:Relative humidity, 90% max.

(Not dewed) (Not dewed)

Applicable FPC t=0.3±0.05 Gold plated t=0.18 ± 0.05 for FH12F-*S-0.5SH

Note 1: When passing the current through all of the contacts,use 70% of the current rating.

Note 2: Includes temperature rise caused by current flow.

Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and

Humidity range covers nonconducting condition of installed connectors in storage, shipment or during transportation.

■Material

Part Material Finish Remarks

Insulator Polyamide, LCP(60 pos.)Color : Beige UL94V-0

Actuator PPS Color : Dark brown

Contact Phosphor bronze Gold plated –––––––

Metal Fittings Brass Tin plated

■Ordering Information

FH12 A - 10 (4) - S A - 0.5 SH (55)

qerw yt u i o

qSeries Name : FH12

wBlank : standard type

A : Top contact type

S : Type with strengthed flip-lock actuator

F : Type with 0.18mm FPC End Thickness

eStandard type : Number of contacts

Eccentric type :

Number of contacts in 0.5mm housing

rStandard type : Blank

Eccentric type : Number of contacts

tContact alignment: Single

yEccentric direction:

Blank : standard type

A : Eccentric type

uContacts Pitch : 0.5mm, 1mm

iContact type

SH

:

SMT horizontal mounting type

SV

:

SMT vertical mounting type

Plating specification

(55) : Gold plated

o

1. Insulation resistance 500M ohms minimum 100V DC

2. Withstanding voltage No flashover or insulation breakdown. 150V AC/1 minute

3. Contact resistance 50m ohms maximum 1mA

4.

Durability (Insertion/withdrawal)

Contact resistance: 50m ohms maximum 20 cycles

No damage, cracks, or parts dislocation.

No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,

5. Vibration Contact resistance: 50m ohms maximum. 2 hours in each of the 3 directions.

No damage, cracks, or parts dislocation.

No electrical discontinuity of 1µs or more Acceleration of 490 m/s2, 11 ms duration,

6. Shock Contact resistance: 50m ohms maximum.

sine half-wave waveform, 3 cycles in each of the 3 axis.

No damage, cracks, or parts dislocation.

Contact resistance: 50m ohms maximum.

7.

Humidity(Steady state)

Insulation resistance: 50M ohms minimum. 96 hours at 40ç and humidity of 90% to 95%

No damage, cracks, or parts dislocation.

Contact resistance: 50m ohms maximum. Temperature: -40

ç

/15 to 35

ç

/85

ç

/15 to 35

ç

,

8. Temperature Cycle Insulation resistance: 50M ohms minimum. Time: 30 /5 max. /30 /5 max.(minutes)

No damage, cracks, or parts dislocation. 5 cycles

9.

Resistance

to

Soldering heat

No deformation of Reflow: At the recommended temperature profile

components affecting performance. Manual soldering: 350±5ç for 3 seconds

Item Specification Conditions

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

8

FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC

BSeries Configuration

FH12- ** S-0.5SH

Number of contacts

6, 8, 10, 11, 12, 13,

14, 15, 16, 17, 18, 19,

20, 22, 24, 25, 26, 28,

30, 32, 33, 34, 35, 36,

40, 45, 50, 53

FH12F- ** S-0.5SH

Number of contacts

6, 8, 10, 12, 13, 14, 15,

16, 18, 20, 22, 24, 25,

26, 28, 30, 32, 34, 36, 40

FH12S- ** S-0.5SH

Number of contacts

30, 40, 45, 50, 53

Standard

FH12-

**

S-1SH

Eccentric FH12- ** (**) SA-1SH

Standard

Number of contacts 5, 6, 7, 8, 9, 11,

12,16,17,22,26

Eccentric

Number of contacts 4, 6, 8, 10, 11,

14, 19, 24

FH12- ** S-1SV

Number of contacts

6, 7, 8, 16, 20, 22,

24

Pitch

0.5mm

1mm

Bottom Contact Type

Type with Strengthened Lock Lever

Type with 0.18mm FPC End Thickness

Top Contact Type Vertical mounting Type

P.13

P.12

P.14

P.18

P.19

FH12- ** S-0.5SV

Number of contacts

10, 12, 13, 15, 16, 17,

18, 20, 22, 24, 26, 30,

32, 33, 34, 36, 40, 45,

49, 50, 60

P.16

FH12A- ** S-0.5SH

Number of contacts

10, 12 ,15, 16, 18, 20,

22, 24, 26, 28, 29, 30,

32, 33, 34, 36, 40, 42,

45, 50

P.15

FPC conductive

surface

FPC conductive surface

(bottom side)

FPC conductive surface

(bottom side)

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

Operation Precautions

9

FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC

BConnector Operating Instructions, precautions and recommendations

●Bottom Contact Type (common for 0.5mm/1mm)

1. FPC/FFC Termination procedure.

Connector installed on the board .

1) Lift up the actuator. Use thumb or index finger.

1) Avoid grasping the actuator with two fingers or lift-

ing the actuator with fingernail.

2) Do not use a thin tool such as the tip of a screw-

driver to release the lock lever. Doing so will cause

deformation of the contacts.

3)

Do not apply force in the direction of arrows A, B, or C

while the lock lever is open.

Doing so will cause the lock lever to become disen gaged,

or will damage the hook portion of the connector body.

4)

When inserting the FPC/FFC, do not forcefully rub against

the surface beneath the connector insertion slot.

Doing so will result in the FPC/FFC forcefully striking the

contacts and this will cause contact deformation, peeling

of the FPC/FFC conductors, and other irregularities.

5)

Insert the FPC/FFC at the proper position of the connector

insertion slot, and insert perpendicularly with respect to the con-

nector. Improper insertion will cause continuity problems, disen-

gagement of the lock lever, and damage to the hook portion.

2) Fully insert the FPC/FFC parallel to mounting sur-

face, with the exposed conductive traces facing

down.

FPC/FFC conductive traces

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC

10

●Bottom Contact Type (common for 0.5mm/1mm)

Operation Precautions

3) Rotate down the actuator until firmly closed.

It is critical that the inserted FPC/FFC is not moved

and remains fully inserted. Should the FPC/FFC be

moved, open the actuator and repeat the process,

starting with Step 1.

2. FPC/FFC Removal

1) Lift up the actuator.

2) Carefully remove the FPC/FFC.

6)

Partial insertion of the FPC/FFC, offset insertion, and

diagonal insertion will result in an unfavorable engage-

ment of the lock lever in which the lock lever is raised.

To correct this, first remove the FPC/FFC and then

reinsert it. Forcing the lock will damage the connector.

7) When locking, handle the FPC/FFC so that a load

is not applied to the FPC/FFC as would occur by

pulling the FPC/FFC, or lifting it, etc.

When a load is applied in the opposite direction to

the rotational movement of the lock, an excessive

load will be applied and this will cause connector

damage.

8) At the time of lock operation, application of force

such as that indicated by the arrows in the dia-

grams below will cause the lock lever to disengage.

When the lock lever has become disengaged,

please exchange the entire connector.

Stiffener

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

11

FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC

●Top Contact Type

Operation Precautions

1. FPC/FFC Termination procedure.

Connector installed on the board .

1) Lift up the actuator. Use thumb or index finger.

2) Fully insert the FPC/FFC parallel to mounting sur-

face, with the exposed conductive traces facing

UP.

3) Rotate down the actuator until firmly closed.

It is critical that the inserted FPC/FFC is not moved

and remains fully inserted. Should the FPC/FFC be

moved, open the actuator and repeat the process,

starting with Step 1 above.

2. FPC/FFC Removal

1) Lift up the actuator.

2) Carefully remove the FPC/FFC.

FPC/FFC conductive traces

Stiffener

FPC insertion area

1)

Avoid further lifting of the lock lever once the lock has been

released. Doing so will cause the lock lever to separate

from the rotational shaft, and the lock lever will become dis-

engaged or the hook portion of the connector body will be

damaged.

2)

Avoid further pressing of the lock portion from the

locked condition when the FPC/FFC has not yet

been inserted. Doing so will cause the lock lever to

become disengaged from the rotational shaft, and

the hook portion of the connector body will be

damaged.

3)

Do not insert the FPC/FFC diagonally. Doing so will

result in the corners of the FPC/FFC catching on the

contacts and will cause deformation of the contacts.

4) When closing down the actuator apply equal pres-

sure to both sides of the actuator.

Lock lever

Rotational shaft

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

12

FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC

●Vertical Mounting Type

Operation Precautions

1. FPC/FFC Termination procedure.

Connector installed on the board .

1) Verify that the actuator is positioned upright. If the

actuator has rotated to the side, carefully rotate it

upright.

2) Insert the FPC/FFC vertically in the connector slot

assuring that the conductive traces of the

FPC/FFC are facing away from the actuator.

3) Press down the actuator in the direction shown.

2. FPC/FFC Removal

Rotate the actuator upward and withdraw the

FPC/FFC.

1) Avoid forcing the actuator up or down without the

FPC/FFC inserted.

2) Do not insert the FPC/FFC diagonally.

Doing so will result in the corners of the FPC/FFC

catching on the contacts and will cause deforma-

tion of the contacts.

FPC/FFC conductive traces

Actuator upright

Stiffener

Slot

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

13

FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC

■0.5mm Pitch Bottom Contact Type

2

(0.2)

0.5

0.821.2

1.85

5.6

4.6

(4.8)

2

FPC/FFC Contact Surface

(2.1)

Mated Cross-sectional Diagram

(3.1) (1.3)

A

B

C

D

Note 1 : Embossed tape reel packaging (2,000 pieces/reel).

Order by number of reels.

Note : If there is no problem with the connector height, we recommend the type with the

strengthened Flip-lock actuator (FH12S-*S-0.5SH).

Standard type connector height: 2 mm

Connector height of type with strengthened Flip-lock actuator: 2.4 mm

DRoHS

Unit:mm

CL No.Part Number 586-0582-5-55

586-0744-5-55

586-0522-3-55

586-0600-5-55

586-0704-0-55

586-0549-0-55

586-0533-0-55

586-0523-6-55

586-0531-4-55

586-0606-1-55

586-0530-1-55

586-0534-2-55

586-0524-9-55

586-0532-7-55

586-0521-0-55

586-0692-3-55

586-0576-2-55

586-0612-4-55

586-0525-1-55

586-0681-7-55

586-0520-8-55

586-0617-8-55

586-0740-4-55

586-0526-4-55

586-0527-7-55

586-0528-0-55

586-0529-2-55

586-0595-7-55

FH12-06S-0.5SH(55)

FH12-08S-0.5SH(55)

FH12-10S-0.5SH(55)

FH12-11S-0.5SH(55)

FH12-12S-0.5SH(55)

FH12-13S-0.5SH(55)

FH12-14S-0.5SH(55)

FH12-15S-0.5SH(55)

FH12-16S-0.5SH(55)

FH12-17S-0.5SH(55)

FH12-18S-0.5SH(55)

FH12-19S-0.5SH(55)

FH12-20S-0.5SH(55)

FH12-22S-0.5SH(55)

FH12-24S-0.5SH(55)

FH12-25S-0.5SH(55)

FH12-26S-0.5SH(55)

FH12-28S-0.5SH(55)

FH12-30S-0.5SH(55)

FH12-32S-0.5SH(55)

FH12-33S-0.5SH(55)

FH12-34S-0.5SH(55)

FH12-35S-0.5SH(55)

FH12-36S-0.5SH(55)

FH12-40S-0.5SH(55)

FH12-45S-0.5SH(55)

FH12-50S-0.5SH(55)

FH12-53S-0.5SH(55)

Number of Contacts

6

8

10

11

12

13

14

15

16

17

18

19

20

22

24

25

26

28

30

32

33

34

35

36

40

45

50

53

A B

02.5

03.5

04.5

05.0

05.5

06.0

06.5

07.0

07.5

08.0

08.5

09.0

09.5

10.5

11.5

12.0

12.5

13.5

14.5

15.5

16.0

16.5

17.0

17.5

19.5

22.0

24.5

26.0

06.1

07.1

08.1

08.6

09.1

09.6

10.1

10.6

11.1

11.6

12.1

12.6

13.1

14.1

15.1

15.6

16.1

17.1

18.1

19.1

19.6

20.1

20.6

21.1

23.1

25.6

28.1

29.6

C

07.1

08.1

09.1

09.6

10.1

10.6

11.1

11.6

12.1

12.6

13.1

13.6

14.1

15.1

16.1

16.6

17.1

18.1

19.1

20.1

20.6

21.1

21.6

22.1

24.1

26.6

29.1

30.6

03.57

04.57

05.57

06.07

06.57

07.07

07.57

08.07

08.57

09.07

09.57

10.07

10.57

11.57

12.57

13.07

13.57

14.57

15.57

16.57

17.07

17.57

18.07

18.57

20.57

23.07

25.57

27.07

YES

2

Note

2

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

Note 1 Embossed tape reel packaging (2,000 pieces/reel).

Order by number of reels.

DRoHS

Unit:mm

CL No.Part Number 586-0667-6-55

586-0640-0-55

586-0665-0-55

586-0642-5-55

586-0691-0-55

FH12S-30S-0.5SH(55)

FH12S-40S-0.5SH(55)

FH12S-45S-0.5SH(55)

FH12S-50S-0.5SH(55)

FH12S-53S-0.5SH(55)

Number of Contacts

30

40

45

50

53

A B

14.5

19.5

22.0

24.5

26.0

18.1

23.1

25.6

28.1

29.6

C

19.1

24.1

26.6

29.1

30.6

15.57

20.57

23.07

25.57

27.07

YES

■0.5mm Pitch Bottom Contact Type with Strengthened Flip-lock Actuator

FPC/FFC Contact Surface

Mated Cross-sectional Diagram

2

C

B

1.2 2 0.8

0.2

0.5

A

(4.8)

2.1

3.1 1.3

2.25

2.4

D4.6

5.6

()

() ()

()

14

FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

15

FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC

Applicable FPC end thickness : 0.18±0.05

■0.5mm Pitch Bottom Contact Type with 0.18mm FPC End Thickness

0.2

0.5

A

0.821.2

B

C

D

1.85

2

5.6

4.6

4.8

FPC Contact Surface

3.15

2.15

1.25

Mated Cross-sectional Diagram

()

()()

()

Note 1 :Embossed tape reel packaging (2,000 pieces/reel).

Order by number of reels.

DRoHS

Unit:mm

CL No.Part Number

586-0672-6-55

586-0738-2-55

586-0709-4-55

586-0653-1-55

586-0629-7-55

586-0655-7-55

586-0680-4-55

586-0673-9-55

586-0626-9-55

586-0636-2-55

586-0630-6-55

586-0632-1-55

586-0733-9-55

586-0627-1-55

586-0643-8-55

586-0628-4-55

586-0705-3-55

586-0677-0-55

586-0656-0-55

586-0635-0-55

FH12F-06S-0.5SH(55)

FH12F-08S-0.5SH(55)

FH12F-10S-0.5SH(55)

FH12F-12S-0.5SH(55)

FH12F-13S-0.5SH(55)

FH12F-14S-0.5SH(55)

FH12F-15S-0.5SH(55)

FH12F-16S-0.5SH(55)

FH12F-18S-0.5SH(55)

FH12F-20S-0.5SH(55)

FH12F-22S-0.5SH(55)

FH12F-24S-0.5SH(55)

FH12F-25S-0.5SH(55)

FH12F-26S-0.5SH(55)

FH12F-28S-0.5SH(55)

FH12F-30S-0.5SH(55)

FH12F-32S-0.5SH(55)

FH12F-34S-0.5SH(55)

FH12F-36S-0.5SH(55)

FH12F-40S-0.5SH(55)

Number of Contacts

6

8

10

12

13

14

15

16

18

20

22

24

25

26

28

30

32

34

36

40

A B

02.5

03.5

04.5

05.5

06.0

06.5

07.0

07.5

08.5

09.5

10.5

11.5

12.0

12.5

13.5

14.5

15.5

16.5

17.5

19.5

06.1

07.1

08.1

09.1

09.6

10.1

10.6

11.1

12.1

13.1

14.1

15.1

15.6

16.1

17.1

18.1

19.1

20.1

21.1

23.1

C

07.1

08.1

09.1

10.1

10.6

11.1

11.6

12.1

13.1

14.1

15.1

16.1

16.6

17.1

18.1

19.1

20.1

21.1

22.1

24.1

03.57

04.57

05.57

06.57

07.07

07.57

08.07

08.57

09.57

10.57

11.57

12.57

13.07

13.57

14.57

15.57

16.57

17.57

18.57

20.57

YES

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

D E RoHS

Unit:mm

CL No.Part Number

586-0550-9-55

586-0696-4-55

586-0551-1-55

586-0552-4-55

586-0553-7-55

586-0554-0-55

586-0686-0-55

586-0555-2-55

586-0663-5-55

586-0725-0-55

586-0585-3-55

586-0556-5-55

586-0687-3-55

586-0570-6-55

586-0670-0-55

586-0662-2-55

586-0557-8-55

586-0698-0-55

586-0558-0-55

586-0559-3-55

FH12A-10S-0.5SH(55)

FH12A-12S-0.5SH(55)

FH12A-15S-0.5SH(55)

FH12A-16S-0.5SH(55)

FH12A-18S-0.5SH(55)

FH12A-20S-0.5SH(55)

FH12A-22S-0.5SH(55)

FH12A-24S-0.5SH(55)

FH12A-26S-0.5SH(55)

FH12A-28S-0.5SH(55)

FH12A-29S-0.5SH(55)

FH12A-30S-0.5SH(55)

FH12A-32S-0.5SH(55)

FH12A-33S-0.5SH(55)

FH12A-34S-0.5SH(55)

FH12A-36S-0.5SH(55)

FH12A-40S-0.5SH(55)

FH12A-42S-0.5SH(55)

FH12A-45S-0.5SH(55)

FH12A-50S-0.5SH(55)

Number of Contacts

10

12

15

16

18

20

22

24

26

28

29

30

32

33

34

36

40

42

45

50

A B

9.1

10.1

11.6

12.1

13.1

14.1

15.1

16.1

17.1

18.1

18.6

19.1

20.1

20.6

21.1

22.1

24.1

25.1

26.6

29.1

8.35

9.35

10.85

11.35

12.35

13.35

14.35

15.35

16.35

17.35

17.85

18.35

19.35

19.85

20.35

21.35

23.35

24.35

25.85

28.35

C

4.5

5.5

7.0

7.5

8.5

9.5

10.5

11.5

12.5

13.5

14.0

14.5

15.5

16.0

16.5

17.5

19.5

20.5

22.0

24.5

9.5

10.5

12.0

12.5

13.5

14.5

15.5

16.5

17.5

18.5

19.0

19.5

20.5

21.0

21.5

22.5

24.5

25.5

27.0

29.5

5.57

6.57

8.07

8.57

9.57

10.57

11.57

12.57

13.57

14.57

15.07

15.57

16.57

17.07

17.57

18.57

20.57

21.57

23.07

25.57

YES

■0.5mm Pitch Top Contact Type

0.5

2.2 0.85

0.8

1.45

6.2

2

FPC/FFC Contact Surface

Mated Cross-sectional Diagram

(1.45)

(1.9)

(5)

(0.45)

(1.85)

(3.6)

(0.2)

A

B

C

D

E

Note 1 : Embossed tape reel packaging (2,000 pieces/reel).

Order by number of reels.

Note : The design is such that the FPC/FFC protrudes on an upward angle so that other

parts can be mounted beneath the PFC/FFC. In view of this, please take note of the

gap at the top surface of the connector.

2

16

FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

17

FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC

■0.5mm Pitch Vertical mounting Type

(

0.15

)10.2

1F

A

B

C

D

E

3.6

5.5

1.75

4.25

(4.85)

0.5

1.4

2.15

0.5 2.5 0.5

Mated Cross-sectional Diagram

FPC/FFC Contact Surface

(

)

()

D E

Unit:mm

CL No.Part Number

586-0560-2-55

586-0615-2-55

586-0575-0-55

586-0561-5-55

586-0572-1-55

586-0601-8-55

586-0573-4-55

586-0562-8-55

586-0589-4-55

586-0563-0-55

586-0664-8-55

586-0564-3-55

586-0699-2-55

586-0565-6-55

586-0706-6-55

586-0641-2-55

586-0566-9-55

586-0567-1-55

586-0602-0-55

586-0568-4-55

586-0735-4-55

FH12-10S-0.5SV(55)

FH12-12S-0.5SV(55)

FH12-13S-0.5SV(55)

FH12-15S-0.5SV(55)

FH12-16S-0.5SV(55)

FH12-17S-0.5SV(55)

FH12-18S-0.5SV(55)

FH12-20S-0.5SV(55)

FH12-22S-0.5SV(55)

FH12-24S-0.5SV(55)

FH12-26S-0.5SV(55)

FH12-30S-0.5SV(55)

FH12-32S-0.5SV(55)

FH12-33S-0.5SV(55)

FH12-34S-0.5SV(55)

FH12-36S-0.5SV(55)

FH12-40S-0.5SV(55)

FH12-45S-0.5SV(55)

FH12-49S-0.5SV(55)

FH12-50S-0.5SV(55)

FH12-60S-0.5SV(55)

Number of Contacts

10

12

13

15

16

17

18

20

22

24

26

30

32

33

34

36

40

45

49

50

60

A B

08.4

09.4

09.9

10.9

11.4

11.9

12.4

13.4

14.4

15.4

16.4

18.4

19.4

19.9

20.4

21.4

23.4

25.9

27.9

28.4

33.4

06.9

07.9

08.4

09.4

09.9

10.4

10.9

11.9

12.9

13.9

14.9

16.9

17.9

18.4

18.9

19.9

21.9

24.4

26.4

26.9

31.9

C

04.5

05.5

06.0

07.0

07.5

08.0

08.5

09.5

10.5

11.5

12.5

14.5

15.5

16.0

16.5

17.5

19.5

22.0

24.0

24.5

29.5

06.5

07.5

08.0

09.0

09.5

10.0

10.5

11.5

12.5

13.5

14.5

16.5

17.5

18.0

18.5

19.5

21.5

24.0

26.0

26.5

31.5

08.2

09.2

09.7

10.7

11.2

11.7

12.2

13.2

14.2

15.2

16.2

18.2

19.2

19.7

20.2

21.2

23.2

25.7

27.7

28.2

33.2

FRoHS

4

8

YES

Note 1 : Embossed tape reel packaging (1,000 pieces/reel).

Order by number of reels.

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC

18

Note 1: Embossed tape reel packaging (2,000 pieces/reel).

Order by number of reels.

Note 2: The 1mm version of FH12 is constructed by loading every other contact into the 0.5mm housing.

When a housing designed for an odd number of 0.5mm pitch contacts is used; the spacing from the

edge to the first contact on either side is the same as the distance between each contact, 1.0mm.

Hirose considers this design to be a standard-type 1.0mm connector.

An eccentric-type connector using a housing designed for an even number of 0.5mm pitch contacts

and consequently one side has 1.5mm distance from the edge to the first contact. (See FPC/FFC

dimensional drawing on page 19) The part number for the eccentric type describes the size of the

0.5mm housing used and lists the number of 1.0mm pitch contacts in parentheses () as shown in the

above table.

D E RoHS

Unit:mm

CL No.Part Number

586-0591-6-55

586-0607-4-55

586-0535-5-55

586-0579-0-55

586-0540-5-55

586-0668-9-55

586-0741-7-55

586-0536-8-55

586-0739-5-55

586-0547-4-55

586-0592-9-55

586-0537-0-55

586-0538-3-55

586-0539-6-55

586-0541-8-55

586-0542-0-55

586-0543-3-55

586-0546-1-55

586-0548-7-55

FH12-05S-1SH(55)

FH12-06S-1SH(55)

FH12-07S-1SH(55)

FH12-08S-1SH(55)

FH12-09S-1SH(55)

FH12-11S-1SH(55)

FH12-12S-1SH(55)

FH12-16S-1SH(55)

FH12-17S-1SH(55)

FH12-22S-1SH(55)

FH12-26S-1SH(55)

FH12-10(4)SA-1SH(55)

FH12-14(6)SA-1SH(55)

FH12-18(8)SA-1SH(55)

FH12-22(10)SA-1SH(55)

FH12-24(11)SA-1SH(55)

FH12-30(14)SA-1SH(55)

FH12-40(19)SA-1SH(55)

FH12-50(24)SA-1SH(55)

Number of Contacts

5

6

7

8

9

11

12

16

17

22

26

4

6

8

10

11

14

19

24

A B

4

5

6

7

8

10

11

15

16

21

25

3

5

7

9

10

13

18

23

8.6

9.6

10.6

11.6

12.6

14.6

15.6

19.6

20.6

25.6

29.6

8.1

10.1

12.1

14.1

15.1

18.1

23.1

28.1

C

9.6

10.6

11.6

12.6

13.6

15.6

16.6

20.6

21.6

26.6

30.6

9.1

11.1

13.1

15.1

16.1

19.1

24.1

29.1

6.07

7.07

8.07

9.07

10.07

12.07

13.07

17.07

18.07

23.07

27.07

5.57

7.57

9.57

11.57

12.57

15.57

20.57

25.57

2.3

2.8

YES

Standard typeEccentric type

■1mm Pitch Type Bottom Contact Type

(0.2)

(2.1)

(3.1)

(4.8)

(1.3)

2.3 E

FPC/FFC Contact Surface

D

1.0

A

0.821.2

B

C

1.85

2

5.6

4.6

Mated Cross-sectional Diagram

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

19

FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC

Note 1: Embossed tape reel packaging (1,000 pieces/reel).

Order by number of reels.

D E F RoHS

Unit:mm

CL No.Part Number

586-0605-9-55

586-0610-9-55

586-0593-1-55

586-0574-7-55

586-0634-7-55

586-0584-0-55

586-0594-4-55

FH12-06S-1SV(55)

FH12-07S-1SV(55)

FH12-08S-1SV(55)

FH12-16S-1SV(55)

FH12-20S-1SV(55)

FH12-22S-1SV(55)

FH12-24S-1SV(55)

Number of Contacts

6

7

8

16

20

22

24

A B

09.9

10.9

11.9

19.9

23.9

25.9

27.9

08.4

09.4

10.4

18.4

22.4

24.4

26.4

C

05

06

07

15

19

21

23

08

09

10

18

22

24

26

09.7

10.7

11.7

19.7

23.7

25.7

27.7

4

8

YES

■1mm Pitch Vertical Mounting Type

(0.15)(0.2) 2

2F

A

B

C

D

E

3.8

(Metal fitting dimension)

3.6

5.5

(4.85)

(2.15)

(1.4)

(4.25)

(1.75)

1.0

0.5 2.5 0.5

Mated Cross-sectional Diagram

FPC/FFC Contact Surface

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC

20

6

8

10

11

12

13

14

15

16

17

18

19

20

22

24

2.5

3.5

4.5

5.0

5.5

6.0

6.5

7.0

7.5

8.0

8.5

9.0

9.5

10.5

11.5

3.5

4.5

5.5

6.0

6.5

7.0

7.5

8.0

8.5

9.0

9.5

10.0

10.5

11.5

12.5

25

26

28

29

30

32

33

34

35

36

40

42

45

50

53

12.0

12.5

13.5

14.0

14.5

15.5

16.0

16.5

17.0

17.5

19.5

20.5

22.0

24.5

26.0

13.0

13.5

14.5

15.0

15.5

16.5

17.0

17.5

18.0

18.5

20.5

21.5

23.0

25.5

27.0

6

8

10

11

12

13

14

15

16

17

18

19

20

22

24

2.5

3.5

4.5

5.0

5.5

6.0

6.5

7.0

7.5

8.0

8.5

9.0

9.5

10.5

11.5

8.1

9.1

10.1

10.6

11.1

11.6

12.1

12.6

13.1

13.6

14.1

14.6

15.1

16.1

17.1

4.5

5.5

6.5

7.0

7.5

8.0

8.5

9.0

9.5

10.0

10.5

11.0

11.5

12.5

13.5

25

26

28

29

30

32

33

34

35

36

40

42

45

50

53

12.0

12.5

13.5

14.0

14.5

15.5

16.0

16.5

17.0

17.5

19.5

20.5

22.0

24.5

26.0

17.6

18.1

19.1

19.6

20.1

21.1

21.6

22.1

22.6

23.1

25.1

26.1

27.6

30.1

31.6

14.0

14.5

15.5

16.0

16.5

17.5

18.0

18.5

19.0

19.5

21.5

22.5

24.0

26.5

28.0

B

Recommended

FPC/FFC

dimensions and Land/Metal Mask dimensions

●0.5mm Pitch Product

Dimension

Number

of Contacts

A B A B

Dimension

Number

of Contacts

Unit: mm

Dimension

Number

of Contacts

A B C

Dimension

Number

of Contacts

A B C

Unit: mm

Land / Metal Mask dimensionsFPC/FFC dimensions

0.5mm Pitch

Bottom Contact

Type

0.5mm Pitch

Top Contact

Type

C

0.5±0.1

0.5±0.05

A±0.05

B±0.07

0.35±0.03(FPC)

0.3±0.03(FFC)

3.5MIN

4.5MIN

B±0.1

C±0.1

A±0.05

0.5±0.05

0.3±0.03(Land)

0.25±0.03(Metal mask)

2.2±0.1

1.5±0.1

1.3±0.1

Recommended metal mask thickness : 0.15mm

0.5mm Pitch

Vertical

Mounting Type

*Set the stiffener thickness to 0.188 (7.5mil) min.

0.8±0.1(Land)

0.65±0.05(Metal mask)

0.6

±

0.1(Land)

0.5

±

0.05(Metal mask)

0.5±0.1

0.5±0.05 0.3±0.05

A±0.05

B±0.07

0.35±0.03(FPC)

Recommended metal mask thickness : 0.15mm

Even contact number Odd contact number

0.3±0.03(FFC)

2MIN

3MIN

0.5±0.05

1±0.05

1±0.05 1±0.05

A±0.1

B±0.05

1.8±0.1

0.8

±

0.1(Land)

0.65

±

0.05(Metal mask)

0.6

±

0.1(Land)

0.5

±

0.05(Metal mask)

0.5±0.05

1±0.05

1±0.05 1±0.05

A±0.1 No.1 contactNo.1 contact

B±0.05

1.8±0.1

1.5±0.1

4.5±0.1

1.5±0.1

4.5±0.1

10

12

13

15

16

17

18

20

22

24

04.5

05.5

06.0

07.0

07.5

08.0

08.5

09.5

10.5

11.5

05.5

06.5

07.0

08.0

08.5

09.0

09.5

10.5

11.5

12.5

26

30

32

33

34

36

40

45

49

50

60

12.5

14.5

15.5

16.0

16.5

17.5

19.5

22.0

24.0

24.5

29.5

13.5

15.5

16.5

17.0

17.5

18.5

20.5

23.0

25.0

25.5

30.5

Dimension

Number

of Contacts

A B A B

Dimension

Number

of Contacts

Unit: mm

10

12

13

15

16

17

18

20

22

24

06.5

07.5

08.0

09.0

09.5

10.0

10.5

11.5

12.5

13.5

04.5

05.5

06.0

07.0

07.5

08.0

08.5

09.5

10.5

11.5

26

30

32

33

34

36

40

45

49

50

60

14.5

16.5

17.5

18.0

18.5

19.5

21.5

24.0

26.0

26.5

31.5

12.5

14.5

15.5

16.0

16.5

17.5

19.5

22.0

24.0

24.5

29.5

Dimension

Number

of Contacts

A B A B

Dimension

Number

of Contacts

Unit: mm

Product Type

Types other than

those below

FH12F

C Dimension

0.3±0.05min

Stiffener thickness should be 0.188 mm (7.5 mil) min

0.18±0.05

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

21

FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC

BRecommended FPC/FFC dimensions and Land/Metal Mask dimensions

●1mm Pitch Product

Land / Metal Mask dimensionsFPC/FFC dimensions

1mm Pitch

Bottom Contact

Type

1mm Pitch

Vertical

Mounting Type

πSet the stiffener thickness to 0.188 (7.5mil) min.

Recommended metal mask thickness : : 0.15mm

5

6

7

8

9

11

12

16

17

22

26

04

05

06

07

08

10

11

15

16

21

25

06

07

08

09

10

12

13

17

18

23

27

1

4

6

8

10

11

14

19

24

03

05

07

09

10

13

18

23

05.5

07.5

09.5

11.5

12.5

15.5

20.5

25.5

1.5

Dimension

Number

of Contacts

A B C

Dimension

Number

of Contacts

A B C

Unit: mm

6

7

8

16

20

22

24

05

06

07

15

19

21

23

07

08

09

17

21

23

25

Dimension

Number

of Contacts

A B

Unit: mm

6

7

8

16

20

22

24

08

09

10

18

22

24

26

05

06

07

15

19

21

23

Dimension

Number

of Contacts

A B

Unit: mm

*Set the stiffener thickness to 0.188 (7.5mil) min.

5

6

7

8

9

11

12

16

17

22

26

04

05

06

07

08

10

11

15

16

21

25

10.6

11.6

12.6

13.6

14.6

16.6

17.6

21.6

22.6

27.6

31.6

07

08

09

10

11

13

14

18

19

24

28

4

6

8

10

11

14

19

24

03

05

07

09

10

13

18

23

10.1

12.1

14.1

16.1

17.1

20.1

25.1

30.1

06.5

08.5

10.5

12.5

13.5

16.5

21.5

26.5

Dimension

Number

of Contacts

A B C

Dimension

Number

of Contacts

A B C

1.5

2

D D

Unit: mm

Standard Type

Eccentric Type

Recommended metal mask thickness : 0.15mm

Eccentric Type

Standard Type

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

Note: 2,000 pieces per reel.

Unit:mm

BPackaging Specification

Embossed Carrier Tape Dimensions

Horizontal Type (Common to Bottom/Top Contact, 0.5mm/1mm Pitch)

A

Dimension

Number

of Contacts

16

24

6

8

10

11

12

13

14

15

16

17

18

19

20

22

24

B

----------

C

07.5

11.5

D

17.4

25.4

E

21.4

29.4

A

Dimension

Number

of Contacts

24

32

44

25

26

28

29

30

32

33

34

35

36

40

42

45

50

53

B

----------

28.4

40.4

C

11.5

14.2

20.2

D

25.4

33.4

45.4

E

29.4

37.4

49.4

Note: 2,000 pieces per reel.

Unit:mm

A

Dimension

Number

of Contacts

16

24

32

44

4

6

8

10

11

14

19

24

Eccentric Type

B

----------

28.4

40.4

C

07.5

11.5

14.2

20.2

D

17.4

25.4

33.4

45.4

E

21.4

29.4

37.4

49.4

●1mm Pitch Bottom Contact Type

●0.5mm Pitch Bottom/Top Contact Type

Standard Type

A

Dimension

Number

of Contacts

16

24

32

44

5

6

7

8

9

11

12

16

17

22

26

B

----------

28.4

40.4

C

07.5

11.5

14.2

20.2

D

17.4

25.4

33.4

45.4

E

21.4

29.4

37.4

49.4

(2.0) Flat surface for placement

with Automatic equipment

22

FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

23

FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC

Note: 1,000 pieces per reel.

Unit:mm

Vertical Mounting Type (Common to 0.5mm/1mm Pitch)

A

Dimension

Number

of Contacts

16

24

10

12

13

15

16

17

18

20

22

24

B

----------

C

07.5

11.5

D

17.4

25.4

E

21.4

29.4

A

Dimension

Number

of Contacts

24

32

44

6

7

8

16

20

22

24

B

----------

28.4

40.4

C

11.5

14.2

20.2

D

25.4

33.4

45.4

E

29.4

37.4

49.4

A

Dimension

Number

of Contacts

24

32

44

56

26

30

32

33

34

36

40

45

49

50

60

B

----------

28.4

40.4

52.4

C

11.5

14.2

20.2

26.2

D

25.4

33.4

45.4

57.4

E

29.4

37.4

49.4

61.4

●1mm Pitch Vertical mounting Type

●0.5mm Pitch Vertical mounting Type

Unit:mm

(1.75) Flat surface for placement

with Automatic equipment

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

Reel Dimensions (Common to All Types)

BRecommended Temperature Profile

End portion Mounting portion Lead portion (400mm min.)

Top cover tape

(D : INSIDE)

( E : OUTSIDE)

Blank portion

(10 pockets min.)

Embossed carrier tape

Blank portion

(10 pockets min.)

( )

HRS test conditions

Solder method :Reflow, IR/hot air

(Nihon Den-netsu Co., Ltd.’s

Part Number: SENSBY NR-2)

Environment: :Room air

Solder composition :Paste, 96.5%Sn/3%Ag/0.5%Cu

(Senju Metal Industry, Co., Ltd.’s

Part Number: M705-221CM5-42-10.5)

Test board :

Glass epoxy 40mm∞80mm∞1.6mm thick

Land dimensions :Top and bottom

contact type 0.3mm

∞

1.3mm

Vertical mounting type 0.6mm

∞

1.5mm

Metal mask :Top and bottom contact type

0.25mm

∞

1.3mm

∞

0.15mm thick

Vertical mounting type

0.5mm

∞

1.5mm

∞

0.15mm thick

This temperature profile is based on the above conditions.

In individual applications the actual temperature may vary,

depending on solder paste type, volume/thickness and board

size/thickness. Consult your solder paste and equipment

manufacturer for specific recommendations.

24

FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC

(ø13)

MAX 250ç

Start

(ç)

Time

60

25ç

(60 seconds)

30 seconds

90 to 120 seconds

Preheating

Soldering

0

50

100

150 150ç

200ç

230ç

200

250

120

Temperature

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

25

FH12 Series●0.5mm and 1mm Pitch Connectors For FPC/FFC

25

35

25

30

175

BFH12 Series FPC/FFC Construction (Recommended Specifications)

1. FFC FFC : Flexible Flat Cable

FPC : Flexible Printed Circuit

Material Name Material Thickness (µm)

2. FPC

3. Precautions

Material Name

Covering layer film

Cover adhesive

Copper foil

Base adhesive

Base film

Reinforcement material adhesive

Stiffener

Material Thickness (µm)

1. This specification is a recommendation for the construction of the FH12 Series FPC and FFC (t=0.3 ±0.05).

2. For details about the construction, please contact the FPC/FFC manufacturers.

Note: Use of a thicker FFC results in a stiffer lock action and the lock is more easily released.

A factor that contributes to thicker FFC is the use of 250 µm stiffener which is thicker than the standard (188 µm) product. This

results in a total thickness of 357 µm.

When using FFC, control of FFC thickness becomes easy if you indicate to us the thickness of the stiffener.

*Real tolerance of thickness dimension is on the order of ±20 µm (275 to 315 µm)

35

30

12

30

188

295

Adhesive

Polyester

Adhesive

Stiffener (Note)

Polyester type

Total

(Nickel under plated / Gold plated),

soft copper film

Polyimide 1 mil

Cu 1oz

Polyimide 1 mil

Heat-hardened adhesive

Polyimide 7 mil

Nickel under plated 1to 5µm /

Gold plated 0.2µm

Total 293

Surface treatmenta 3

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.