Tap/Isolator Hybrid
Tap - Isolator Hybrid
Parameter Single Stage Dual Stage
Wavelength Range 1535 nm – 1565 nm 1530 nm – 1570 nm
Insertion Loss in Signal Channel (for
1% tap ratio) ≤ 0.7 dB ≤ 0.9 dB
Insertion Loss in Tap Channel ≤ 14dB (5% Tap), ≤ 20.8 dB (1% Tap)
Tap Ratio 1% or customized
Isolation in Band (at 23° C) ≥ 30 dB ≥ 43 dB
Return Loss ≥ 45 dB
Maximum Power 300 mW
PDL ≤ 0.1 dB 0.15 dB
PMD ≤ 0.25 ps ≤ 0.1 ps
Directivity ≥ 50 dB
Operating Temperature -5° C ~ + 65° C
Storage Temperature - 40° C ~ + 85° C
Package Dimensions 5.5 mm (Φ) x 35 mm (L)
Note1: All values specified are without connectors.
Note2: Higher performance specifications upon request.
Note3: Fiber type Corning SMF-28e.
T I - - -
- -
Stage Type Tap Ratio Fiber Length Pigtail Style Connector
S: Single Stage 01: 1% A: 1 meter (=Package style) 0: None 7: LC/UPC
D: Dual Stage 02: 2% B: 1.5 meter B: bare fiber 1: FC/PC
8: LC/SPC
05: 5% S: Special L: 900 µm loose tube 2: FC/APC 9: Special
10: 10% 3: SC/ PC A: FC/UPC
4: SC/APC B: SC/UPC
5: FC/SPC
C: ST
6: SC/SPC
www.lighteltech.com
2210 Lind Ave SW, Suite 100
Renton, WA 98057 USA
(425) 277-8000 ph.
(425) 277-5280 Fax All rights Reserved 2009