APPLICATION TOOLING Crimping tools and machines The arrow mark indicates the press that is applicable to the applicator. Crimping tools and machines Strip-crimp applicator for side feeding terminals Crimping applicator for end-feeding terminals MKS-SC MK-L Crimping applicator for side-feeding terminals Crimping applicator for end-feeding flag terminals MKS-L MKF-L Semi-automatic press Semi-automatic crimping machines (presses) contact a wire to a chain terminal each time a footswitch is pressed. AP-K2N * Dimensions: (WxLxH)280x480x505mm * Weight: Approx. 90kg(198lb) * Power source: 100V AC, Single-phase 50/60Hz * Pressure output: 14.7kN[1,500kg(3307lb)] * Dies: Applicator replacement 1 2 Hand tools Crimping tools Crimping tools Hand tools for chain terminals Terminals and parts model number in alphabetical order Hand tools for loose piece terminals Extraction and Insertion tools for loose piece terminals YRS YC YRM YRF YRK YRK-EX series series series series series series Dimensions: (WxL) 59x224mm Dimensions: (WxL) 70x296mm Dimensions: (WxL) 59x224mm Dimensions: (WxL) 70x295mm 80x305mm Dimensions: (WxLxD) 75x314x25mm Dimensions: (WxLxD) 75x314x25mm Extraction tool Insertion tool Crimping tools It is the manual tool that is convenience to terminate very small quantity of contacts for prototype or maintenance. It is composed of two crimping dies for the conductor and insulation, and can be crimp easily. YRK and YRK-EX can be used for mass-production. Note: (1) These tools are for prototype tooling or repair. (2) YC tool has two crimping sections (A and B). YRS tool has also two crimping sections by inverting upper dies. Be sure to check applicable wires before use. Since the dies are fixed, the crimping height cannot be adjusted. Therefore, some of the applicable wires described in this catalog may not be crimped properly. Before use, check for proper crimping (such as tensile strength, terminal/contact deformation). (3) These tools are not applicable to 2-wire crimping. (4) When hand crimping board-in terminals (SAN, SCN, SDN, SGN, SIN, SJN, SZN), care should be taken not to contaminate the solder tails of the terminals, as with greasy or oily fingers. If a solder problem arises, some cleaning of the tips of the terminal is advisable. (5) WC and JUC hand tools are provided by J.S.T.(U.K.) LTD. and contact them about the details of these hand tools. YRS series JK-SP/SS2*** YRS-370 J-SP/SS1*** YRS-440 J-SP/SS2*** YRS-330 Extraction tool is used to extract contacts improperly inserted in the housing. YC series YRM series YRF series YRK . YRK-EX series WC & JUC series JUK's Hand Tools - - - - - - - - - YC-440 Terminal in loose form model No. - J-BP/BS1*** - - - - - - - - JUCS-FO - - LFO-2.5-250N - - - - - JUCS-FO - - - - - - - - - - - - - RA-BC12** RF-BC22** - MD-SP22** YRS-460 - RA-SC1290 RF-SC22** RPJ-SP/SS2331 YRS-231 - - YRS-331 YRM-232 YRM-233 - - - - YRS-470 - KEJ-0.7 for plug, KEJ-0.4 for socket DEJ-0.3 LFO-1.0-250N MD-SP12** Insertion tool allows contacts be inserted in the housing. This tool greatly increases efficiency especially when thin wires are used. DEJ-0.3 - - - - MEJ-06 - MEJ-06 - EJ-RA - - YRM-230 - - - - - - - - - - - EJ-RPJ - - SAA-21(T)-** - YC-141 - - - - LAA-21(T-)** - - SAA-50(T)-** - YC-182 - - - - LAA-50(T)-** - - SAA-51(T)-** - YC-142 - - - - LAA-51(T)-** - - SAB-51(T)-** - YC-142 - - - - LAB-51(T)-** - - SACH-003G-P0.2 YRS-1190 - - - - - - - - SAGH-002GU-P0.3 YRS-858 - - - - - - - - - - - - - - - - - - SAN-002T-0.8A SAN-002T-0.8K SBH-001T-P0.5 SBHL-002T-P0.5 SBHM-001T-P0.5 SBHS-002T-P0.5A SBHS-002T-P0.5A SBHSM-002T-P0.5 SBHT-002T-P0.5 SBN-001T-1.0 SCN-001T-1.0K SCN-001T-P1.0 SCS-41T-2.3 SCSN-41T-P2.3 SCZH-002T-P0.5 YRS-220 - YRS-857 - YRS-852 - YRS-854 YRS-856 YRS-857 YRS-170 YRS-191 - - YRS-492 YC-670R - YC-670R - - WC-670 - EJ-PH BBH-001T-P0.5 - - - - - - - - - - BBHM-001T-P0.5 - - - - - - EJ-BHMR - EJ-BHS2 - - - - - - - EJ-BHS2 - - - - - - - EJ-BHSW - - - - - - - EJ-BHT - - - - - YC-170R YC-191R - - - - - - - BBN-001T-1.0 BCN-001T-1.0K WC-191 - BCN-001T-P1.0 - - CSJ-23 EJ-CSN - - - - - - - - - - - - - - - - - - - - Note: Contact JST for wire range. 3 4 Hand tools Crimping tools Crimping tools Hand tools Terminals and parts model number in alphabetical order for chain terminals YRS series Hand tools for loose piece terminals YC series Extraction and Insertion tools for loose piece terminals YRM series YRF series YRK . YRK-EX series WC & JUC series JUK's Hand Tools Extraction tool Terminal in loose form model No. Insertion tool SDF-01T-1.0A - YC-045 - - - - LDF-01T-1.0A - - SDF-01T-1.3AS - YC-045 - - - - LDF-01T-1.3AS - - SDN-21T-P1.5 - YC-600R - - - - BDN-21T-P1.5 SDY-01T-P1.6ASV - YC-525R - - - - BDY-01T-P1.6ASV SEH-001T-P0.6 YRS-260 - - - EJ-PH - - - - - - - - EJ-PH - SEH-002T-P0.6L - - - - - - - EJ-PH - SEH-003T-P0.6L - - - - - - - EJ-PH - SF1F-002(*)-P0.6 - - - - YRK-1220 - - EJ-JFAJ1100 - SF1M-002(*)-M0.6A - - - - YRK-1220 - - EJ-JFAJ1100 - SF1F-21(*)-P0.6 - - - - YRK-1210 - - EJ-JFAJ1100 - SF1M-21(*)-M0.6A - - - - YRK-1210 - - EJ-JFAJ1100 - SF3F-002(*)-P2.0 - - - YRF-882 YRK-8821 - BF3F-002(*)-P2.0 EJ-JFAJ3 - SF3F-01(*)-P2.0 - - - YRF-881 YRK-8811 - BF3F-01(*)-P2.0 EJ-JFAJ3 - SF3M-01(*)-M2.0N - - - YRF-881 YRK-8811 - BF3M-01(*)-M2.0N EJ-JFAJ3 - SF3F-41(*)-P2.0 - - - YRF-880 YRK-8801 - LF3F-41(*)-P2.0 EJ-JFAJ3 - SF3M-41(*)-M2.0N - - - YRF-880 YRK-8801 - LF3M-41(*)-M2.0N EJ-JFAJ3 - SF3F-71(*)-P2.0 - - - YRF-1070 YRK-1071 - BF3F-71(*)-P2.0 EJ-JFAJ3 - SF3M-71(*)-M2.0N - - YRF-1071 YRK-1071 - BF3M-71(*)-M2.0N EJ-JFAJ3 SFO-41(T)-187N(-8) - YC-271 - - - - LFO-41(T)-187N SFO-61(T)-250A - YC-270 - - - - LFO-61(T)-250A - - SFPS-61T-250 - YC-272 - - - - LFPS-61(T)-250 - - SFT-61T-250N - YC-510 - - - - LFT-61T-250N - - SGF-41(T)-4 - YC-055 - - - - LGF-41(T)-4 - - SGF-51(T)-5 - YC-065 - - - - SGM-51T-5 - YC-056 - - - - - - - WC-SHCM-A03 - - - WC-122 - - - - YRS-960 SHF-001T-0.8BS YRS-122 SHF-002T-0.8BS YRS-300 - - YC-122R - WC-260 BEH-001T-P0.6 - - SEH-001T-P0.6L SHCM-A03T-P025 YC-260R - SLJ-1.4 LGF-51(T)-5 LGF-51(T)-5A LGM-51T-5 - BHF-001T-0.8BS - - - - - - - - - EJ-SMP - - EJ-SMP - SHIF-01T-P0.5 - YC-986R - - - - - EJ-HILP - SHIF-21T-P0.5 - YC-995R - - - - - EJ-HILP - SHIM-01T-P0.5 - YC-986R - - - - - EJ-HILR - SHIM-21T-P0.5 - YC-995R - - - - - EJ-HILR YC-580R - - - - BHR-001T-P0.6 - YC-054 - - - - LIM-01(T)-110A - - - - - - JUCS-IM - - - - JUCS-IM - - - SHR-001T-P0.6 YRS-580 - - SIM-01(T)-110A - SIM-1.0-250D/N - SIM-2.5-250D/N - - - - SIM-41(T)-110B - YC-067 - - - - LIM-41(T)-110B - - SIM-51(T)-250N - YC-321 - - - - LIM-51(T)-250N - - SIN-001T-1.2 YRS-034 - - - - - - - - SIN-002T-1.0S YRS-035 - - - - - - - - - SIN-01T-1.2 - YC-340R - - - - LIN-01T-1.2 - SIN-01T-1.8 - YC-032 - - - - LIN-01T-1.8 - - SIN-01T-1.8N - YC-032 - - - - LIN-01T-1.8N - - SIN-21T-1.8 - YC-350 - - - - LIN-21T-1.8 - - YC-570 SIN-21T-1.8S - - - - - LIN-21T-1.8S - - SIN-61T-2.6S - YC-560 - - - - LIN-61T-2.6S - - SIN-81T-3.6S - YC-940 - - - - LIN-81T-3.6S - - YC-571 Note: Contact JST for wire range. 5 6 Hand tools Crimping tools Crimping tools Hand tools Terminals and parts model number in alphabetical order for chain terminals YRS series Hand tools for loose piece terminals YC series YRM series YRF series Extraction and Insertion tools for loose piece terminals YRK . YRK-EX series WC & JUC series JUK's Hand Tools Terminal in loose form model No. Extraction tool Insertion tool SJ2F-002GF-P1.0 YRS-8851 - - - YRK-8851 - - EJ-JFAJ2N - SJ2M-002GF-M1.0N YRS-8851 - - - YRK-8851 - - EJ-JFAJ2N - SJ2F-01GF-P1.0 YRS-8861 - - - YRK-8861 - - EJ-JFAJ2N - SJ2M-01GF-M1.0N YRS-8861 - - - YRK-8861 - - EJ-JFAJ2N - SJ2M-01GF-M1.0S YRS-8861 - - - YRK-8861 - - EJ-JFAJ2N - SJ2F-21GF-P1.0 - - - YRF-1120 YRK-1120 - LJ2F-21GF-P1.0 EJ-JFAJ2N - SJ2M-21GF-M1.0N - - - YRF-1120 YRK-1120 - LJ2M-21GF-M1.0N EJ-JFAJ2N - SJ4F-71GF-M3.0 - - - YRF-1130 - - BJ4F-71GF-M3.0 EJ-JFAJ4 - SJ4F-81GF-M3.0 - - - YRF-1370 - - BJ4F-81GF-M3.0 EJ-JFAJ4 - SJ5F-71GF-M6.5 - - - YRF-888 - - LJ5F-71GF-M6.5 EJ-JFAJ5 - SJ5M-71GF-M6.5 - - - YRF-888 - - LJ5M-71GF-M6.5 EJ-JFAJ5 - SJ5F-81GF-M6.5 - - - YRF-889 - - LJ5F-81GF-M6.5 EJ-JFAJ5 - SJ5M-81GF-M6.5 - - - YRF-889 - - LJ5M-81GF-M6.5 EJ-JFAJ5 - SJ5F-91GF-M6.5 - - - - - LJ5F-91GF-M6.5 EJ-JFAJ5 - LJ5M-91GF-M6.5 EJ-JFAJ5 SJ5M-91GF-M6.5 - - - - - - - SJN-001PT-0.9 YRS-1181 - - - - - SJN-002PT-0.9 YRS-036 - - - - - - - - - - - - - SLC-22T-2.0 - - - - - SLC-001T-P2.0 - - - - SLC-02T-P2.0 - - - - SLF/M-01T-P1.3E - YC-202 YRM-201 - - WC-202 SLF/M-41T-P1.3E - YC-203 - - - WC-203 SMF-01T-1.0 - YC-081 - - - - YC-082 - - - - - - YC-580R - - - BMR-001T-0.6 - - - - - LOM-21(T)-187 - - - - - - - - - - - - - - - BPA-001T-P0.5 BPAL-001T-P0.5 SMM-003T-P0.5 YRS-800 SMR-001T-0.6 YRS-580 - SOM-21(T)-187 - YC-680 SOM-51(T)-250 - YC-066 SOTZP-002GD-P0.18 - SPA-001T-P0.5 - - YC-610R YC-611R YC-610R WC-310 - - SLC-21T-2.0 SMF-01T-1.3 YC-310 - LLC-21T-2.0 EJ-LC - - - EJ-LC - - - - EJ-LCL - - - - EJ-LCL LLF/M-01T-P1.3E LEJ-13 LLF/M-41T-P1.3E LEJ-13 - LIT-2013 - - LMF-01T-1.0 - - - LMF-01T-1.3 - - - - - WC-800 WC-066 LOM-51(T)-250 - EJ-OTZS - EJ-PH - EJ-PAL - SPAL-001T-P0.5 - - - - - SPAL-002T-P0.5 YRS-1340 - - - - - SPB-1.0-250N-S - - - - - JUCS-PB - - - SPB-2.5-250N-S - - - - - JUCS-PB - - - SPF-01T-2.5C - - - - - - - - - - - YC-611R YC-043R - EJ-PAL LPF-01T-2.5C - - - SPH-001T-P0.5L YRS-245 - SPH-002T-P0.5L YRS-241 - - SPH-002T-P0.5S YRS-240 - YRM-240 SPH-004T-P0.5S YRS-243 - - - - - - - WC-610 BPHD-001T-P0.5 EJ-PHD-RB - - WC-620 BPHD-002T-P0.5 EJ-PHD-RB - SPHD-001T-P0.5 - YC-610R YC-611R - - WC-240 - - - BPH-002T-P0.5S - - EJ-PH - EJ-PH - EJ-PH - SPHD-002T-P0.5 YRS-620 - YRM-620 SPLI-002T-P0.5 YRS-1410 - - - - - - SPND-001T-C0.5 YRS-1091 - - - - - - EJ-PND SPND-002T-C0.5 YRS-1090 - - - - - - EJ-PND - - - - - - - - - - - - - - SPNI-001T-P0.5 - SPNI-002T-P0.5 YRS-1340 YC-610R YC-611R - - - - - Note: Contact JST for wire range. 7 8 Hand tools Crimping tools Crimping tools Hand tools Terminals and parts model number in alphabetical order for chain terminals YRS series Hand tools for loose piece terminals YC series YC-740 Extraction and Insertion tools for loose piece terminals WC & JUC series JUK's Hand Tools Extraction tool Terminal in loose form model No. YRM series YRF series YRK . YRK-EX series - - - WC-740 LPS-01T-110 - - - WC-730 LPS-01T-187(-8) SPS-01T-110 - SPS-01T-187(-8) - SPS-21T-205(-5) - YC-760 - - - SPS-21T-250 - YC-780 - - - WC-780 LPS-21T-250 EJ-PS250 SPS-21T-250S - YC-780 - - - WC-780 LPS-21T-250S EJ-PS250 SPS-41T-110 - - - - WC-750 LPS-41T-110 SPS-51T-187(-8) - - - - WC-710 LPS-51T-187(-8) - - - - - - - YC-730 YC-731 YC-750 YC-751 YC-710 YC-711 YC-770 SPS-51T-205 - SPS-61T-250 - YC-720 SPS-61T-250S - YC-721 - SPS-91T-250 - - - YRF-790 - SPS-91T-250S - - - YRF-791 SPUD-001T-P0.5 YRS-1320 - - SPUD-002T-P0.5 YRS-1520 - - SPXA-001T-P0.6 - - SRA-20(T)-** - SRA-21(T)-** YC-771 - - - - EJ-PS187 LPS-21T-205(-5) - - - - - - - EJ-PS187 LPS-51T-205 - - - LPS-61T-250 EJ-PS250 - - LPS-61T-250S EJ-PS250 - - BPS-91T-250 EJ-PS250 - - - BPS-91T-250S EJ-PS250 - - - - - EJ-PUD - - - - - EJ-PUD - - - - - - EJ-PXA YC-181 - - - - LRA-20(T)-** - - - YC-141 - - - - LRA-21(T)-** - - SRA-50(T)-** - YC-182 - - - - LRA-50(T)-** - - SRA-51(T)-** - YC-142 - - - - LRA-51(T)-** - - SRB-1.0-( ) - - - - - JUCS-RB/RT - - - SRB-2.5-( ) - - - - - JUCS-RB/RT - - - SRB-51(T)-** - YC-142 - - - - LRB-51(T)-** - - SRC-01(T)-** - YC-033 - - - - LRC-01(T)-** - - SRC-50(T)-** - YC-183 - - - - LRC-50(T)-** - - SRC-51(T)-** - YC-142 - - - - LRC-51(T)-** - - SRF-51(T)-** - YC-142 - - - - LRF-51(T)-** - - SRT-1.0-( ) - - - - - JUCS-RB/RT - - - SRT-2.5-( ) - - - - - JUCS-RB/RT - - - SRT-51T-** - - - - - SRWF-01GG-M0.6 - - - - - - - EJ-RPZ - SRWM-01GG-S0.6 - - - - - - - EJ-RPZ - SRWF-21GG-M0.6 - - - - - - - EJ-RPZ - SRWM-21GG-S0.6 - - - - - - - EJ-RPZ - SRWF-61GG-M0.6 - YC-840R - - - - BRWF-61GG-M0.6 EJ-RPZ - SRWM-61GG-S0.6 - YC-840R - - - - BRWM-61GG-S0.6 EJ-RPZ - - YC-143R WC-720 Insertion tool LRT-51T-** - - - SSFH-001T-P0.5 - - - - - - - EJ-SFH - SSFH-002T-P0.5 YRS-1490 - - - - - - EJ-SFH - SSH-003T-P0.2-H YRS-859 - - - - WC-SH2832 - - - SSH-003GA-P0.2 YRS-859 - - - - WC-SH2832 - - - SSHL-002T-P0.2 YRS-1140 - - - - WC-GH2630 - - - SSHL-003T-P0.2 YRS-859 - - - - WC-SH2832 - - - SSHL-003GA1-P0.2 YRS-859 - - - - WC-SH2832 - - - - BSF/M-01T-P1.4 SLJ-1.4 BSF/M-21T-P1.4 SLJ-1.4 - LTI-01(T)-110N SSF/M-01T-P1.4 - YC-500 SSF/M-21T-P1.4 - YC-550 - - - STI-01(T)-110N - YC-041 - - - WC-550 - - - ITBL-08V - - - Note: Contact JST for wire range. 9 10 Hand tools Crimping tools Crimping tools Hand tools Terminals and parts model number in alphabetical order for chain terminals Hand tools for loose piece terminals Terminal in loose form model No. Extraction tool JUCS-TI - - JUCS-TI - - - LTI-41(T)-110N - - - LTI-51(T)-250N - - - LTO-01(T)-110N(-8) - - - - LTO-01(T)-187N(-8) - - - - - - - - - - - JUCS-05110 - - - - - - - JUCS-2.8/4.8 - - - - - - - JUCS-2.8/4.8 - - - - - - - JUCS-6.3 - - - - - JUCS-6.3 - - - - - LTO-21(T)-205N - - - - - LTO-21(T)-250N - - - - - LTO-41(T)-110N(-8) - - - - - - LTO-41(T)-187N(-8) - - YC-064 - - - - LTO-41T-187S - YC-047 - - - - LTO-61(T)-250N - - - YC-280 LTO-81(T)-250N WC & JUC series JUK's Hand Tools YRS series YC series YRM series YRF series YRK . YRK-EX series STI-1.0-250D/N - - - - - STI-2.5-250D/N - - - - - STI-41(T)-110N - YC-063 - - - - STI-51(T)-250N - YC-322 - - - STO-01(T)-110N(-8) - YC-041 - - - STO-01(T)-187N(-8) - YC-042 - - STO-0.25-110N - YC-810 - STO-0.5-110N - YC-820 STO-1.0-110N - STO-1.0-187N - STO-1.0-250N - STO-2.5-250N - - STO-21(T)-205N - YC-053 - STO-21(T)-250N - YC-102 - STO-41(T)-110N(-8) - YC-062 - STO-41(T)-187N(-8) - YC-051 STO-41T-187S - STO-61(T)-250N STO-81(T)-250N STS/D-002GG-P0.6 Extraction and Insertion tools for loose piece terminals - YRS-1360 - - YRF-280 - - - - - - - - - - - - YC-450 - - - - BVA-41T-P1.1 - - YC-044 - - - - LVF-01T-1.5A - SVF-01T-1.5N - YC-151 - - - - LVF-01T-1.5N SVF-01T-2.36N - YC-152 - - - - SVF-42T-P2.0 - YC-592 - - - WC-592 SVM-42T-P2.0 - YC-593 - - - SVF/M-61T-P2.0 - YC-590 - YRF-590 SVF/M-81T-P2.0 - - YRF-591 SVH-21T-P1.1 - - - EJ-SV - LVF-01T-2.36N EJ-LV - BVF-42T-P2.0 VLJ-20 - WC-592 BVM-42T-P2.0 VLJ-20 - - WC-590 BVF/M-61T-P2.0 VLJ-20 - - WC-591 BVF/M-81T-P2.0 VLJ-20 - - - WC-160 BVH-21T-(P)1.1 EJ-NV - WC-930 - YRM-160 YC-161R - YC-164R YRM-164 YC-930R - EJ-TSD SVF-01T-1.5A YC-160R - EJ-187S SVA-41T-P1.1 - Insertion tool SVH-41T-P1.1 - - - - BVH-41T-P1.1 EJ-NV SVT-41T-P1.1 - YC-630 - - - - BVT-41T-P1.1 EJ-VT - SVU-21T-P0.6 - YC-990R - - - - BVU-21T-P0.6 EJ-VU4 - SVYF-61T-P0.5A - - - - - - SWPJT-21T-P0.5 - - - - - - - EJ-WPJ - SWPJT-21T-P0.5A - - - - - - - EJ-WPJ - SWPJR-21T-M0.5 - - - - - - - EJ-WPJ SWPKP-21T-0.6 - - - YRF-1051 - - BWPKP-21T-0.6 - SWPKR-21T-0.6 - - - YRF-1050 - - BWPKR-21T-0.6 - - - - - WC-JWPF - YC-931R YRF-536 SWPR-001T-P025 YRS-980 SWPT-001T-P025 YRS-980 - - - WC-JWPF SXA-01T-P0.6 YRS-701 YC-701R - - - WC-700M SXA-001T-P0.6 YRS-692 YC-692R - - - SXA-001T-P0.6L YRS-691 - - - - - WC-691 - - - - - - EJ-JWPF - - EJ-JWPF - BXA-01T-P0.6 EJ-XAG,EJ-XMP BXA-001T-P0.6 EJ-XMP, EJ-XMR - - IT-XA - - Note: Contact JST for wire range. 11 12 Hand tools Crimping tools Crimping tools Hand tools Terminals and parts model number in alphabetical order for chain terminals YRS series Hand tools for loose piece terminals YC series Extraction and Insertion tools for loose piece terminals YRM series YRF series YRK . YRK-EX series WC & JUC series JUK's Hand Tools WC-700M Extraction tool Terminal in loose form model No. Insertion tool SXAM-01T-P0.6 YRS-701 YC-701R - - - BXAM-01T-P0.6 EJ-XAW - SXAM-001T-P0.6 YRS-692 YC-692R - - - - BXAM-001T-P0.6 EJ-XAW - - SXF-01T-P0.7 - YC-251 - - - - BXF-01T-(P)0.7 LEJ-7 SXF-41T-P0.7 - YC-252 - - - - BXF-41T-(P)0.7 LEJ-7 - - - - BXH-001T-P0.6 XJ-06 - SXH-001T-P0.6 SXH-001T-P0.6N YRS-110 YC-110R YC-111R - WC-110 - - - - - - XJ-06 - - - - - - - XJ-06 - YC-701R - - - - BXM-01T-P0.6 EJ-XAG,EJ-XMP YC-692R - - - - BXM-001T-P0.6 EJ-XMP, EJ-XMR YRS-1380 - - - - - - - YRS-1390 - - - - - - - - YRS-125 - - - - - - - - SXH-002T-P0.6 YRS-480 SXM-01T-P0.6 YRS-701 SXM-001T-P0.6 YRS-692 SXNI-001T-P0.6 SXNI-003T-P0.6 SYF-001T-P0.6 SYF/M-01T-P0.5A - YC-520 - - - WC-520 BYF/M-01T-P0.5A YLJ-0.5 SYF/M-41T-P0.5A - YC-530 - - - WC-530 BYF/M-41T-P0.5A YLJ-0.5 SYF-61T-P0.5A - - - YRF-536 - SYM-001T-P0.6 SYM-01T-P0.7 SYM-41T-P0.7 YRS-121 YC-121R - - - - YC-251 - - - - YC-252 SZE-002T-P0.3 YRS-1300 SZE-003T-P0.3 YRS-1330 - WC-121 - - IT-XA - - - - - BYM-001T-P0.6 SMJ-06 - - BYM-01T-(P)0.7 LEJ-7 - BYM-41T-(P)0.7 LEJ-7 - - - - - - - - - - - - - - - SZF/M-01T-P0.7 - YC-390R - - - - BZF/M-01T-(P)0.7 ZLJ-07S SZF/M-41T-P0.7 - YC-380R - - - - BZF/M-41T-(P)0.7 ZLJ-07S SZH-002T-P0.5 YRS-491 - - - - WC-491 SZH-003T-P0.5 YRS-490 - - - - WC-490 SZN-002T-P0.7K YRS-541 - - - - - SZN-003T-P0.7K YRS-540 - - - - SZPD-002T-P0.3 YRS-1460 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Note: Contact JST for wire range. 13 14 Crimping tools Crimping tools YRK series hand crimping tools suitable for mass-production Dies replacement type hand crimping tools * Crimping work, such as setting contacts to hand tools etc., is facilitated by using a strip contact to improve the productivity. YRK-EX * A light operation enables to terminate the contact correctly, by adopting straight-ahead crimping. * High reliability of crimping is provided by choosing the crimper and anvil suitable for the wire specification. * A structure, that the carrier of contact doesn't fly off, has been adopted to this tool. * The crimping die can be easily exchanged by only insertion and extraction of pin. * Common handle and crimping dies can be stored in One case and it is easy to carry. Patent pending Hand Crimping Tools YRK Standard type * When exchanging the crimper, the crimping suitable for the wire specification can be conducted. * Anvil is fixed to tool. Dimensions: 75(W)x314(L)x25(D)mm Weight: Approx. 800g (When assembling dies) Dimensions: 75(W)x314(L)x25(D)mm Weight: Approx. 800g (When assembling dies) Dimensions: 376(W)x295(L)x73(D)mm Contact and Applicable dies Contact and Applicable dies Series Crimper *1 Contact Model No. *1 Contact Model No. Receptacle Tab Hand crimp tools SF1F-21 (*) -P0.6 SF1M-21 (*) -M0.6A YRK-1210 Nominal Model No. of crimper Applicable wire size Marking Series AWG Insulation O.D. (mm) LA #22 1.58 LB KV0.75 1.90 LC #20 1.76 Nominal Receptacle Tab LA / LB J1000 Type II L LC / LD S J2000 M L SJ2F-002GF-P1.0 SJ2F-01GF-P1.0 SJ2F-21GF-P1.0 SJ2M-002GF-M1.0N SJ2M-01GF-M1.0N SJ2M-21GF-M1.0N YRK-8851 YRK-8861 YRK-1120 LD #18 2.03 SA #28 1.20 #24 1.43 MA #24 1.43 MB #20 1.53 *2 LA #22 1.58 LB #20 1.76 SA #28 1.20 SB #24 1.43 MA / MB J1000 Type II L SF1F-21(*)-P0.6 SF3F-002 (*) -P2.0 -- SC #26 1.30 SD #24 1.11 MA #24 1.43 S J2000 SJ2F-002GF-P1.0 M SJ2F-01GF-P1.0 L SJ2F-21GF-P1.0 S SF3F-002 (*) -P2.0 SJ2M-002GF-M1.0N SJ2M-01GF-M1.0N SJ2M-21GF-M1.0N SF3M-01 (*) -M2.0N MB #20 1.76 #22 1.58 MD #20 2.56 LA #20 1.76 LB #16 2.35 LC #18 2.03 LD #18 2.83 2LA #16 3.10 2LB #14 3.30 MC / MD J300 SF3F-41 (*) -P2.0 SF3M-41 (*) -M2.0N YRK-8801 SF3F-71 (*) -P2.0 SF3M-71 (*) -M2.0N YRK-1071 Note: 1. J1000 Finish(*): T ...... Tin-plated GC ... Gold-plated 2. J300 Finish(*): GF... Nickel-undercoated, 0.38m selective gold-plated GI... Nickel-undercoated, 0.76m selective gold-plated T ...... Tin-plated 3. The wear of parts is caused by using hand tool repeatedly. Measure the crimping height daily and conduct periodical inspection of the wearing parts, such as ratchet, pin and so on. 15 2LA / 2LB *1... Crimper is either the pair of A and B or the pair of C and D. *2... When using wire type UL 2517. 2.03 C #22 1.58 D KV0.75 1.90 A #28 1.20 B #24 1.43 A #24 1.43 B #20 1.53 *2 A #22 1.58 B #20 1.76 A #28 1.20 B #24 1.43 C #26 1.30 D #24 1.11 A #24 1.43 B #20 1.76 C #22 1.58 D #20 2.56 A #20 1.76 B #16 2.35 C #18 2.03 D #18 2.83 A #16 3.10 B #14 3.30 J2MA / B J2LA / B M SF3M-01 (*) -M2.0N Yellow green J2SL White J2ML Purple J2LL Orange J3SL Yellow J3ML Green J3LL Red J32LL Blue Handle unit Upper pin Lower pin Case J3MC / D J300 J3LA / B L SF3F-41 (*) -P2.0 SF3M-41 (*) -M2.0N LC / LD 2L J1LL Common parts J3MA / B SF3F-01 (*) -P2.0 LA / LB L 1.76 #18 J3SC / D YRK-8811 MC Color mark J3SA / B MA / MB SF3F-01 (*) -P2.0 #20 B J2SA / B -- SC / SD M Anvil J1LC / D LA / LB YRK-8821 A SF1M-21(*)-M0.6A SA / SB S Applicable wire size Insulation O.D. AWG (mm) Die mark J1LA / B SA / SB SB Crimper Model No. J3LC / D 2L SF3F-71 (*) -P2.0 SF3M-71 (*) -M2.0N J32LA / B Note: 1. J1000 Finish(*): T ...... Tin-plated GC ... Gold-plated 2. J300 Finish(*): GF... Nickel-undercoated, 0.38m selective gold-plated GI... Nickel-undercoated, 0.76m selective gold-plated T ...... Tin-plated 3. The wear of parts is caused by using hand tool repeatedly. Measure the crimping height daily and conduct periodical inspection of the wearing parts, such as ratchet, pin and so on. *1... Crimper is either the pair of A and B or the pair of C and D. *2... When using wire type UL 2517. 16