EE-SPX302-W2A - Omron Electronics

EE-SPX302/402/304/404/305/405/306/406-W2A

Prewired Compact Sensing Head for

Easy Mounting in Space-Confined

Areas

HLight modulation effectively reduces

external light interference

HEasy-to-use photomicrosensor with cable

attached

HWide operating voltage range: 5 to

24 VDC

HOptical axis monitoring with a Light-ON

indicator

HAmplifier’s NPN output can be directly

connected to a TTL and programmable

controller (PLC)

HIncorporating dust-proof slit

HDetecting an object with 0.5 mm dia.

Ordering Information

Appearance Sensing Method Slot width Slot depth Output

configuration

Weight Part number

Slot 3.6 mm 6.6 mm Dark-ON Approx. 18.5 g

(including lead

)

EE-SPX302-W2A

Light-ON

(

wires) EE-SPX402-W2A

3.6 mm 6.6 mm Dark-ON EE-SPX304-W2A

Light-ON EE-SPX404-W2A

5mm 9mm Dark-ON EE-SPX305-W2A

Light-ON EE-SPX405-W2A

3.6 mm 6.6 mm Dark-ON EE-SPX306-W2A

Light-ON EE-SPX406-W2A

EE--SPX302/402/304/404/305/405/306/406--W2A EE--SPX302/402/304/404/305/405/306/406--W2A

Specifications

JRATINGS

Model EE-SPX302-W2A

EE-SPX304-W2A

EE-SPX402-W2A

EE-SPX404-W2A

EE-SPX305-W2A

EE-SPX306-W2A

EE-SPX405-W2A

EE-SPX406-W2A

Supply voltage 5to24VDC±10%, ripple (p-p): 5% max.

Current consumption Average: 15 mA max.; Peak: 50 mA max.

Standard reference object Opaque: 0.5 x 1 mm min. Opaque: 0.8 x 2 mm min. (See Note 1.)

Differential distance 0.05 mm max.

Control output At 5 to 24 VDC: 80-mA load current (IC) with a residual voltage of 1.0 V max.

When driving TTL: 10-mA load current (IC) with a residual voltage of 0.4 V max.

Output

configuration

Transistor on output stage

without detecting object

OFF ON OFF ON

Transistor on output stage

with detecting object

ON OFF ON OFF

Indicator

(

)

Without detecting object ON

(See Note 2.) With detecting object OFF

Response frequency (See Note 3.) 500 Hz

Connecting method Cable length: 1 m long cable (attached)

Light source GaAs infrared LED (pulse-modulated) with a wavelength of 940 nm

Receiver Si photodiode with a sensing wavelength of 850 nm max.

Note: 1. EE-SPX306-W2A and EE-SPX406-W2A can detect opaque objects as small as 0.5 x 1.0 mm.

2. The indicator is made of a GaP red LED (peak emission wavelength: 700 nm).

3. The response frequency was measured by detecting the following disks rotating.

2mm

2mm 2mm

Disk

JCHARACTERISTICS

Ambient illumination Sensing face: fluorescent light/incandescent light: 3,000 lxmax.

Enclosure ratings IP50 (except terminals)

Ambient temperature Operating -10°Cto55

°C(14

°F to 131°F)

Storage -25°Cto65

°C(-13

°F to 149°F)

Ambient humidity Operating 35% to 85%

Storage 35% to 95%

Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hrs each in X, Y, and Z

directions

Shock resistance Destruction: 500 m/s2(approx. 50G) for 3 times each in X, Y, and Z directions

Cable length 2 m max. (including attached cable, AWG22 min.)

EE--SPX302/402/304/404/305/405/306/406--W2AEE--SPX302/402/304/404/305/405/306/406--W2A

Engineering Data

JSENSING POSITION CHARACTERISTICS (TYPICAL)

EE-SPX302-W2A

Dark-ON mode

EE-SPX304-W2A

Distance d (mm)

Dark-ON mode

Tr ON

Tr OFF

Distance d (mm)

Note: The sensing position characteristics

of the EE-SPX402/404/406-W2A

are opposite to those of

EE-SPX302/304/306-W2A.

EE-SPX306-W2A

Tr ON

Tr OFF

Dark-ON mode

EE-SPX305-W2

Dark-ON mode

dNote: The sensing position characteristics

of the EE-SPX405-W2A are opposite

to those of EE-SPX305-W2A.

Distance d (mm) Distance d (mm)

Tr ON

Tr OFF

Tr ON

Tr OFF

Operation

JINTERNAL/EXTERNAL CIRCUIT DIAGRAM

Light-ON/Dark-ON

Operation

indicator

Logic

circuit

1.5 to

3mA

OUT

5to24VDC

←IC

Main

circuit

Load

(relay) RL

Connect RLas

shown only

when logic circuit

is driven.

Connect a diode in parallel to the load when an inductive load is connected

between + and OUT.

JTIMING CHART

Light-ON Dark-ON

OFF

LIGHT indicator

(red)

OFF

Output

transistor

Operates

Releases

Load (relay)

Output voltage

(logic)

Interrupted

Incident

OFF

LIGHT indicator

(red)

OFF

Output

transistor

Operates

Releases

Load (relay)

Output voltage

(logic)

Interrupted

Incident

EE--SPX302/402/304/404/305/405/306/406--W2A EE--SPX302/402/304/404/305/405/306/406--W2A

Dimensions

Unit: mm (inch)

JEE-SPX302-W2A, EE-SPX402-W2A

Terminal Arrangement

R3.2

C0.5

3.5 dia. hole

R3.2

1000±30

IEC colors are shown in parentheses.

Red (Brown) VCC

White (Black) OUTPUT

Black (Blue) GND (0 V)

Optical axis

(0.5-mm wide)

2.5

(0.10)

6.6 (0.26)

21.2

(0.83)

15.6

(0.61)

6.5

(0.26)

(0.24) 3

(0.12)

(0.24)

(0.28)

R3.2

(0.51)

3.6

(0.14)

2.5

(0.10)

7 (0.28)

(0.08)

1.5

(0.06) max.

JEE-SPX304-W2A, EE-SPX404-W2A

Terminal Arrangement

1000±20

R3.2

C0.5

IEC colors are shown in parentheses.

Red (Brown) VCC

White (Black) OUTPUT

Black (Blue) GND (0 V)

15.6 (0.61)

21.2 (0.83)

6.5 (0.20)

6(0.24)

7 (0.28)

2.5 (0.10)

2(0.08)

R3.2

C0.5

3.6

(0.14)

(0.51)

6.6 (0.26)

2.5

(0.10)

6.6 (0.26)

(0.24)

3.5

(0.14)

Optical axis

JEE-SPX305-W2A, EE-SPX405-W2A

Terminal Arrangement

4-R2

7dia.

1000±30

Optical axis

IEC colors are shown in parentheses.

Red (Brown) VCC

White (Black) OUTPUT

Black (Blue) GND (0 V)

14.4

(0.57)

27.2

(1.07)

0.8

(0.03)

(0.08)

(0.20)

6.35(0.25)

(0.35)

3.2

(0.13)

(0.79)

14.5

(0.57)

6.95(0.27)

(0.79)

3.6

(0.14)

7.2

(0.28)

12.7

(0.50)

15.5

(0.61)

EE--SPX302/402/304/404/305/405/306/406--W2AEE--SPX302/402/304/404/305/405/306/406--W2A

JEE-SPX306-W2A, EE-SPX406-W2A

Terminal Arrangement

IEC colors are shown in parentheses.

Red (Brown) VCC

White (Black) OUTPUT

Black (Blue) GND (0 V)

Optical axis

1.5 Max.

1000±30

8±2

Indicator

2-3.5 dia. hole

21.2

(0.83)

3.6

(0.14)

6.6

(0.26)

13.8

(0.54) 19

(0.75)

(0.98)

(0.12)

15.6

(0.61)

7.4

(0.29)

(0.28)

(0.24)

Indicator

Precautions

Refer to the Technical Information Section for general

precautions.

JWIRING

A cable with a thickness of 0.3 mm2min. or AWG22 and a length

of 2 m max. must be connected to the output terminals.

To use a cable longer than 2 m, attach a capacitor with a

capacitance of approximately 10 µF to the wires, as shown

below. The distance between the terminal and the capacitor must

be 2 m or less:

2mmax.

A capacitance of

10 µFmin.

5to24VDC

Extension

cable

OUT

Avoid disconnecting from the photomicrosensor when power is

supplied to the photomicrosensor or the photomicrosensor could

be damaged.

If the metal mounting base is subjected to inductive electrical

noise, the photomicrosensor can be activated accidentally. If

noise is a problem, take the following precautions:

1. Connect the GND terminal to the mounting base, so there will

be no difference in electric potential between the photomicro-

sensor and mounting base.

2. Connect the GND terminal to the mounting base via a

0.47-µF capacitor.

3. Insert a plastic insulating plate with a thickness of approxi-

mately 10 mm between the photomicrosensor and mounting

base.

Wire, as shown by the following illustration, to connect a small

inductive load (a relay for example) to the photomicrosensor. A

diode must be connected parallel to the relay to absorb the

reverse voltage.

Relay

5to24VDC

OUT

JPOWER SUPPLY

When using a standard switching regulator, ground the FG and G

terminal so that the photomicrosensor will be in a stable

operating condition.

Switching

regulator

Cat. No. GC APMS-1 09/02 Specifications subject to change without notice. Printed in U.S.A.

OMRON ELECTRONICS LLC

OneEastCommerceDrive

Schaumburg, IL 60173

NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.

1-800-55-OMRON

OMRON CANADA, INC.

885 Milner Avenue

416-286-6465

OMRON ON--LINE

Global -- http://www.omron.com

USA -- http://www.omron.com/oei

Canada -- http://www.omron.com/oci

Toronto, Ontario M1B 5V8