ABS2 THRU ABS10
Single Phase 1.0 AMP. Glass Passivated Bridge Rectifiers
Voltage Range
200 to 1000 Volts
Current
1.0 Ampere
Features
Glass passivated junction
Ideal for printed circuit board
Reliable low cost construction utilizing
molded plastic technique
High temperature soldering guaranteed:
260℃ / 10 seconds / 0.375” ( 9.5mm )
lead length at 5 lbs., ( 2.3 kg ) tension
Small size, simple installation
Leads solderable per MIL-STD-202,
Method 208
High surge current capability
Thin Mini-Dip
Dimensions in inches and (millimeters)
Maximum Ratings and Electrical Characteristics
Rating at 25℃ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Type Number Symbol ABS2 ABS4 ABS6 ABS8 ABS10 Units
Maximum Recurrent Peak Reverse Voltage VRRM 200 400 600 800 1000 V
Maximum RMS Voltage VRMS 140 280 420 560 700 V
Maximum DC Blocking Voltage VDC 200 400 600 800 1000 V
Maximum Average Forward Rectified Current
On glass-epoxy P.C.B.
On aluminum substrate
I(AV) 0.8
1.0
A
Peak Forward Surge Current, 8.3 ms Single
Half Sine-wave Superimposed on Rated
Load (JEDEC method )
IFSM 30 A
Maximum Instantaneous Forward Voltage
@ 0.4A VF 095 V
Maximum DC Reverse Current @ TA=25℃
at Rated DC Blocking Voltage IR 10
uA
uA
Typical Thermal resistance Junction to Lead
On aluminum substrate
On Glass-Epoxy substrate
RθJL
RθJA
25
62.5
80
℃/W
Operating Temperature Range TJ -55 to +150 ℃
Storage Temperature Range TSTG -55 to +150 ℃
Rev. 1, Sep. 2004
Preliminary