Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.
−FC55−
Plastic Film Capacitors
■Dimensions in mm (not to scale)
(Dimensions : mm)
■Packaging Specification for Bulk Package
Packing quantity: 100 pcs./bag
Metallized Film
■Specifications
Category temp. range
(Including temperature-rise on unit surface)
Rated voltage
Capacitance range
Capacitance tolerance
Withstand voltage
Dissipation factor (tan )
–40 ˚C to +105 ˚C
450 VDC (Derating of rated voltage by 1.25%/˚C at more than 85˚C)
Peak to peak voltage applied on the capacitor should be less than
240Vp-p, and zero to peak voltage should be less than 450V.
250 VDC
630 VDC (Derating of rated voltage by 1.0%/˚C at more than 85˚C)
250 VDC
450 VDC
630 VDC
250 VDC
450 VDC
630 VDC
250 VDC
450 VDC
630 VDC
tanδ≦0.1 % (20 ˚C,1 kHz)
Between terminals:Rated voltage (VDC)×150 % 60 s
Insulation resistance (IR)
0.1 µF to 6.8 µF
0.1 µF to 4.7 µF
0.1 µF to 2.2 µF
±3 %(H), ±5 %(J)
±5 %(J), ±10 %(K)
±5 %(J)
C≦0.33 µF :IR≧9,000 MΩ
(20 ˚C, 100 VDC, 60 s)
C
>
0.33 µF :IR≧3,000 MΩ
・
µF
C≦0.33 µF :IR≧30,000 MΩ
(20 ˚C, 100 VDC, 60 s)
C
>
0.33 µF :IR≧10,000 MΩ
・
µF
C≦0.33 µF :IR≧9,000 MΩ
(20 ˚C, 500 VDC, 60 s)
C
>
0.33 µF :IR≧3,000 MΩ
・
µF
❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage,
please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
p Œ ¯ ¶ ‚ /P53-76 12.11.14 20:52 y [ W 55