DC/DC Converters TEN 5WI Series, 6 Watt CB Scheme Features Ultra wide 4:1 input range DIP-24 Package with standard pinout Full SMD design Extended operating temperature range UL 60950-1 -40C to +85C max. High efficiency Excellent load and line regulation Indefinite short circuit protection I/O isolation 1500VDC Built-in Filter to meet EN 55022, Class A and FCC, level A Lead-free design, fully RoHS compliant 3-year product warranty The TEN 5WI series is a family of high performance dc-dc converter modules with 5 W output power, featuring ultra wide input voltage ranges of 9 - 36 VDC or 18 - 75 VDC. They come in a shielded DIP-24 metal package with industry-standard footprint. A high efficiency allows -40C to +70C operation ambient temperatures at full load. Typical applications for these converters are battery operated equipment and distributed power architectures in communication, instrumentation and industrial electronics, everywhere where a wide input voltage range is required. Models Ordercode Output voltage Output current max. Efficiency typ. TEN 5-2410WI 3.3 VDC 1200 mA 75 % TEN 5-2411WI 5 VDC 1000 mA 78 % 12 VDC 500 mA 83 % 15 VDC 400 mA 82 % 5 VDC 500 mA 78 % TEN 5-2422WI 12 VDC 250 mA 83 % TEN 5-2423WI 15 VDC 200 mA 82 % TEN 5-4810WI 3.3 VDC 1200 mA 75 % TEN 5-4811WI 5 VDC 1000 mA 78 % 12 VDC 500 mA 83 % 15 VDC 400 mA 82 % 5 VDC 500 mA 78 % TEN 5-4822WI 12 VDC 250 mA 83 % TEN 5-4823WI 15 VDC 200 mA 82 % TEN 5-2412WI TEN 5-2413WI TEN 5-2421WI TEN 5-4812WI TEN 5-4813WI TEN 5-4821WI http://www.tracopower.com Input voltage range 9 - 36 VDC (24 VDC nominal) 18 - 75 VDC (48 VDC nominal) Page 1 of 3 DC/DC Converters TEN 5WI Series 6 Watt Input Specifications Input current no load 24 Vin models 20 mA typ. 48 Vin models 10 mA typ. Start-up voltage / under voltage shut down 24 Vin models 9 VDC / 8.5 VDC typ. 48 Vin models 18 VDC / 16 VDC typ. Surge voltage (1 sec. max.) 24 Vin models 50 V max. 48 Vin models 100 V max. Reverse voltage protection 1.0 A max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy 2.0 % max. Regulation - Input variation Vin min. to Vin max. - Load variation 10 - 100 % single output models dual output models 25 - 100 % 0.5 % max. 1.0 % max. 1.0 % max. balanced load 5.0 % max. unbalanced load Ripple and noise (20 MHz Bandwidth) 80 mVpk-pk max Temperature coefficient 0.02 %/K Current limitation >110 % of Iout max., constant current Short circuit protection indefinite (automatic recovery) Capacitive load 3.3 / 5 VDC models 470 F max. 12 / 15 VDC models 100 F max. dual output models 100 F max. General Specifications Temperature ranges - Operating -40C to +85C - Case temperature +100C max. - Storage -40C to +125C Derating 3.5 %/K above +70C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25C, ground benign) >800'000 h Isolation voltage (60 sec.) - Input/Output 1'500 VDC Isolation capacitance - Input/Output 1000 pF typ Isolation resistance - Input/Output (500 VDC) >1`000 M Ohm Switching frequency 450 kHz typ. (Pulse frequency modulation PFM) Safety standards cUL/UL 60950-1 , IEC/EN 60950-1 Environmental compliance - Reach www.tracopower.com/info/reach-declaration.pdf - RoHS directive 2011/65/EU All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TEN 5WI Series 6 Watt Physical Specifications Casing material black anodized aluminium Baseplate material non conductive FR4 Potting material epoxy (UL 94V-0 rated) Weight 17 g (0.49 oz) Soldering temperature max. 260C / 10 sec. Supporting documents: www.tracopower.com/overview/ten5wi 15.24 (0.6) 16 (0.2) 5.08 (0.9) 22.86 31.8 (1.25) 23 22 Bottom view (0.1) 2.54 4.5 (0.18) Outline Dimensions 9 11 14 Insulated Baseplate 2 3 2.4 15.24 (0.1) (0.6) 4.1 10.2 20.3 (0.16) (0.4) (0.8) Pin-Out Pin Single Dual 2 -Vin (GND) -Vin (GND) 3 -Vin (GND) -Vin (GND) 9 No pin Common 11 No function -Vout 14 +Vout +Vout 16 -Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) Dimensions in [mm], () = Inch Pin diameter o 0.5 0.05 (0.02 0.002) Tolerances 0.5 (0.02) Pin pitch tolerances 0.35 (0.014) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. July 13, 2018 Page 3 of 3