MIL-DTL-55181/8D
w/AMENDMENT 1
5
REQUIREMENTS:
Dimensions and configurations: See f i gures 1 and 2, and t abl e I.
Contacts: 7.5 ampere current rating, 20 AWG.
Mating connectors: M55181/7-01, M55181/7-02, M55181/7-03, M55181/7-04, and M55181/7-05.
Part or Identif ying Number (PIN): M55181/8 – (dash number specified in table I).
Supersession, cross-reference and mating connector s: S ee table II.
TABLE I. PIN.
Without grounding washe r
With grounding wash er
TABLE II. Supersession, cross ref erence and mating connector.
Mating type designator 1/
M55181/8-01
M55181/8-01
M55181/8-01
MW20F(M)D00
MW20F(M)D00
MW20F(M)D00
MW10M(M)D13
MW10M(M)D17
MW10M(M)D19
1/ This type designat or shall not be referenced for procurem ent purposes.
Amendment notat i ons. The margins of this specification are mar ked with vertical lines to indicate
modifications generated by this amendment. This wa s done as a convenience only and the G overnment
assumes no liability whatsoever f or any inaccuracies in these notations. Bidders and contract ors are
cautioned to ev al uate the requireme nts of this document based on the ent ire content irrespe ct ive of the
marginal notati ons.
Referenced docum ents. This document references MI L-DTL-55181.
CONCLUDING MATERIAL
Custodians: Prepa ring activity:
Army - CR DLA - CC
Navy - EC
Air Force – 85 (Project 5935-2009-174)
DLA - CC
Review activity:
Air Force - 99
NOTE: The activ i ties listed above were interested in this document as of t he date of this document .
Since organizat ions and responsibilit ies can change, y ou should verify the currency of the informati on
above using the A S SIST Online database at http://assist.daps.dla.mil.