MCC 132 MCD 132 ITRMS = 2x 300 A ITAVM = 2x 130 A VRRM = 800-1800 V Thyristor Modules Thyristor/Diode Modules 3 VRSM VDSM VRRM VDRM Type V V Version 1 Version 1 900 1300 1500 1700 1900 800 1200 1400 1600 1800 MCC 132-08io1 MCC 132-12io1 MCC 132-14io1 MCC 132-16io1 MCC 132-18io1 MCD 132-08io1 MCD 132-12io1 MCD 132-14io1 MCD 132-16io1 MCD 132-18io1 Test Conditions ITRMS, IFRMS ITAVM, IFAVM TVJ = TVJM TC = 85C; 180 sine ITSM, IFSM TVJ = 45C; VR = 0 (di/dt)cr 2 Maximum Ratings 300 130 A A t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 4750 5080 A A TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 4230 4530 A A TVJ = 45C VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 113 000 108 000 A2s A2s TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine 89 500 86 200 A2 s A2 s 150 A/ms TVJ = TVJM repetitive, IT = 500 A f =50 Hz, tP =200 ms VD = 2/3 VDRM IG = 0.5 A non repetitive, IT = 500 A diG/dt = 0.5 A/ms 4 5 1 Symbol oi2dt 6 7 3 6 7 1 5 4 2 3 1 5 4 2 MCC MCD Features International standard package Direct copper bonded Al2O3 -ceramic base plate Planar passivated chips Isolation voltage 3600 V~ UL registered, E 72873 Keyed gate/cathode twin pins 500 A/ms (dv/dt)cr TVJ = TVJM; VDR = 2/3 VDRM RGK = ; method 1 (linear voltage rise) 1000 V/ms PGM TVJ = TVJM IT = ITAVM PGAV 120 60 8 W W W VRGM 10 V TVJ TVJM Tstg -40...+125 125 -40...+125 C C C 3000 3600 V~ V~ VISOL 50/60 Hz, RMS IISOL 1 mA tP = 30 ms tP = 500 ms t = 1 min t=1s Applications Motor control Power converter Heat and temperature control for industrial furnaces and chemical processes Lighting control Contactless switches Advantages Space and weight savings Simple mounting Improved temperature and power cycling Reduced protection circuits Mounting torque (M6) Terminal connection torque (M6) Weight Typical including screws 2.25-2.75/20-25 Nm/lb.in. 4.5-5.5/40-48 Nm/lb.in. 125 Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions (c) 2000 IXYS All rights reserved g 032 Md 1-4 http://store.iiic.cc/ MCC 132 MCD 132 Symbol Test Conditions Characteristic Values IRRM, IDRM TVJ = TVJM; VR = VRRM; VD = VDRM VT, VF IT, IF = 300 A; TVJ = 25C VT0 rT 10 mA 1.36 V For power-loss calculations only (TVJ = 125C) 0.8 1.5 V mW VGT VD = 6 V; IGT VD = 6 V; TVJ = 25C TVJ = -40C TVJ = 25C TVJ = -40C 2.5 2.6 150 200 V V mA mA VGD IGD TVJ = TVJM; VD = 2/3 VDRM 0.2 10 V mA IL TVJ = 25C; tP = 30 ms; VD = 6 V IG = 0.5 A; diG/dt = 0.5 A/ms 300 mA IH TVJ = 25C; VD = 6 V; RGK = 200 mA tgd TVJ = 25C; VD = 1/2 VDRM IG = 0.5 A; diG/dt = 0.5 A/ms 2 ms tq TVJ = TVJM; IT = 160 A, tP = 200 ms; -di/dt = 10 A/ms typ. VR = 100 V; dv/dt = 20 V/ms; VD = 2/3 VDRM 150 ms QS IRM TVJ = TVJM; IT, IF = 300 A, -di/dt = 50 A/ms 550 235 mC A RthJC per per per per RthJK dS dA a thyristor/diode; DC current module thyristor/diode; DC current module other values see Fig. 8/9 Creepage distance on surface Strike distance through air Maximum allowable acceleration 0.23 0.115 0.33 0.165 K/W K/W K/W K/W 12.7 9.6 50 mm mm m/s2 Fig. 1 Gate trigger characteristics Optional accessories for modules Keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red Type ZY 180L (L = Left for pin pair 4/5) UL 758, style 1385, Type ZY 180R (R = right for pin pair 6/7) CSA class 5851, guide 460-1-1 Fig. 2 Gate trigger delay time Dimensions in mm (1 mm = 0.0394") MCC MCD (c) 2000 IXYS All rights reserved 2-4 http://store.iiic.cc/ MCC 132 MCD 132 106 4000 ITSM i2 t A A2s 3000 50 Hz 80 % VRRM TVJ = 45C TVJ = 125C 105 2000 TVJ = 45C TVJ = 125C 1000 0 0.001 104 0.01 0.1 s 1 Fig. 3 Surge overload current ITSM, IFSM: Crest value, t: duration ms 1 t 10 t Fig. 4 i2t versus time (1-10 ms) Fig. 4a Maximum forward current at case temperature Fig. 5 Power dissipation versus onstate current and ambient temperature (per thyristor or diode) Fig. 6 Three phase rectifier bridge: Power dissipation versus direct output current and ambient temperature (c) 2000 IXYS All rights reserved 3-4 http://store.iiic.cc/ MCC 132 MCD 132 Fig. 7 Three phase AC-controller: Power dissipation versus RMS output current and ambient temperature Fig. 8 Transient thermal impedance junction to case (per thyristor or diode) RthJC for various conduction angles d: d DC 180 120 60 30 RthJC (K/W) 0.230 0.244 0.255 0.283 0.321 Constants for ZthJC calculation: i 1 2 3 Rthi (K/W) ti (s) 0.0095 0.0175 0.203 0.001 0.065 0.4 Fig. 9 Transient thermal impedance junction to heatsink (per thyristor or diode) RthJK for various conduction angles d: d DC 180 120 60 30 RthJK (K/W) 0.330 0.344 0.355 0.383 0.421 Constants for ZthJK calculation: i 1 2 3 4 (c) 2000 IXYS All rights reserved Rthi (K/W) ti (s) 0.0095 0.0175 0.203 0.1 0.001 0.065 0.4 1.29 4-4 http://store.iiic.cc/