UF4001-M3, UF4002-M3, UF4003-M3, UF4004-M3, UF4005-M3, UF4006-M3, UF4007-M3
www.vishay.com Vishay General Semiconductor
Revision: 15-Aug-13 1Document Number: 89174
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Ultrafast Plastic Rectifier
FEATURES
Glass passivated chip junction
Ultrafast reverse recovery time
Low forward voltage drop
Low switching losses, high efficiency
High forward surge capability
Solder dip 275 °C max. 10 s, per JESD 22-B106
Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
For use in high frequency rectification and freewheeling
application in switching mode converters and inverters for
consumer, computer, and telecommunication.
MECHANICAL DATA
Case: DO-204AL (DO-41)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS-compliant, and
commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test
Polarity: Color band denotes cathode end
PRIMARY CHARACTERISTICS
IF(AV) 1.0 A
VRRM 50 V, 100 V, 200 V, 400 V, 600 V,
800 V, 1000 V
IFSM 30 A
trr 50 ns, 75 ns
VF1.0 V, 1.7 V
TJ max. 150 °C
Package DO-204AL (DO-41)
Diode variations Single die
DO-204AL (DO-41)
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL UF4001 UF4002 UF4003 UF4004 UF4005 UF4006 UF4007 UNIT
Maximum repetitive peak
reverse voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V
Maximum average forward rectified current
0.375" (9.5 mm) lead length at TA = 55 °C IF(AV) 1.0 A
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load IFSM 30 A
Operating junction and storage temperature range TJ, TSTG - 55 to + 150 °C
UF4001-M3, UF4002-M3, UF4003-M3, UF4004-M3, UF4005-M3, UF4006-M3, UF4007-M3
www.vishay.com Vishay General Semiconductor
Revision: 15-Aug-13 2Document Number: 89174
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
Note
(1) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
Fig. 1 - Maximum Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER TEST CONDITIONS SYMBOL UF4001 UF4002 UF4003 UF4004 UF4005 UF4006 UF4007 UNIT
Maximum instantaneous
forward voltage 1.0 A VF (1) 1.0 1.7 V
Maximum DC reverse
current at rated DC
blocking voltage
TA = 25 °C
IR
10
μA
TA = 100 °C 50
Maximum reverse
recovery time
IF = 0.5 A, IR = 1.0 A,
Irr = 0.25 A trr 50 75 ns
Typical junction
capacitance 4.0 V, 1 MHz CJ17 pF
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER SYMBOL UF4001 UF4002 UF4003 UF4004 UF4005 UF4006 UF4007 UNIT
Typical thermal resistance RJA (1) 60 °C/W
RJL (1) 15
ORDERING INFORMATION (Example)
PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE
UF4007-M3/54 0.33 54 5500 13" diameter paper tape and reel
UF4007-M3/73 0.34 73 3000 Ammo pack packaging
1.0
20 40 60 80 100 120 140 160
0
0.5
Ambient Temperature (°C)
Average Forward Rectied Current (A)
Resistive or Inductive Load
0.375" (9.5 mm) Lead Length
110 100
0
5
10
15
20
25
30
Number of Cycles at 60 Hz
Peak Forward Surge Current (A)
T
A
= 55 °C
8.3 ms Single Half Sine-Wave
UF4001-M3, UF4002-M3, UF4003-M3, UF4004-M3, UF4005-M3, UF4006-M3, UF4007-M3
www.vishay.com Vishay General Semiconductor
Revision: 15-Aug-13 3Document Number: 89174
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 4 - Typical Reverse Leakage Characteristics
Fig. 5 - Typical Instantaneous Forward Characteristics
Fig. 6 - Typical Reverse Leakage Characteristics
Fig. 7 - Typical Junction Capacitance
0.01
0.1
1
10
100
1.00.80.60.40.2 1.2 1.4 1.6
Instantaneous Forward Current (A)
Instantaneous Forward Voltage (V)
T
J
= 150 °C
T
J
= 125 °C
T
J
= 25 °C
T
J
= 100 °C
UF4001 thru UF4004
0.001
0.01
0.1
1
10
100
0 20406080100
Percent of Peak Reverse Voltage (%)
Instantaneous Reverse Leakage
Current (μA)
T
J
= 150 °C
T
J
= 125 °C
T
J
= 25 °C
T
J
= 100 °C
UF4001 thru UF4004
10
1.0 1.2 1.4 1.6 1.80.80.60.40.2
Instantaneous Forward Voltage (V)
1
0.1
0.01
TJ = 150 °C
TJ = 125 °C
TJ = 25 °C
TJ = 100 °C
UF4005 thru UF4007
Instantaneous Forward Current (A)
0.001
0.01
0.1
1
10
100
0 20406080100
Percent of Peak Reverse Voltage (%)
Instantaneous Reverse Leakage
Current (μA)
T
J
= 150 °C
T
J
= 125 °C
T
J
= 25 °C
T
J
= 100 °C
UF4005 thru UF4007
0.1 110 100
1
10
100
Reverse Voltage (V)
Junction Capacitance (pF)
T
J
= 25 °C
f = 1.0 MHz
V
sig
= 50 mV
p-p
UF4001-M3, UF4002-M3, UF4003-M3, UF4004-M3, UF4005-M3, UF4006-M3, UF4007-M3
www.vishay.com Vishay General Semiconductor
Revision: 15-Aug-13 4Document Number: 89174
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-204AL (DO-41)
0.107 (2.7)
0.080 (2.0)
DIA.
0.034 (0.86)
0.028 (0.71)
DIA.
1.0 (25.4)
MIN.
1.0 (25.4)
MIN.
0.205 (5.2)
0.160 (4.1)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
UF4007-M3/54