62-19
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
© 2012 Glenair, Inc. Printed in U.S.A.CAGE Codes 06324
www.glenair.com E-Mail: sales@glenair.com
62
Strain Reliefs
AS85049/49-2 and MS27506
Straight Strain Relief
Self-Locking or Non-Self-Locking
A Thread
E
Self-Locking Only
F
Self-Locking
Only
H
Cable
Entry
Note: Screw
orientation shown is
for non-self-locking
configuration. Screws
on self-locking
configurations are on
the same side/face of
the clamp.
TABLE I: Shell Size, Cable Entry and Backshell Dimensions
Shell
Size
Shell Size
Ref.
A Thread
Class 2B
Ø E Max
Self-Locking Only
F Max
Self-Locking Only
H
Max
Cable Entry
Min Max
8 8/9 .438 - 28 UNEF .86 (21.8) .91 (23.1) .85 (21.6) .098 (2.5) .234 (5.9)
10 10/11 .562 - 24 UNEF .98 (24.9) .91 (23.1) .90 (22.9) .153 (3.9) .234 (5.9)
12 12/13 .688 - 24 UNEF 1.16 (29.5) 1.01 (25.7) 1.10 (27.9) .190 (4.8) .328 (8.3)
14 14/15 .813 - 20 UNEF 1.28 (32.5) 1.06 (26.9) 1.15 (29.2) .260 (6.6) .457 (11.6)
16 16/17 .938 - 20 UNEF 1.41 (35.8) 1.16 (29.5) 1.30 (33.0) .283 (7.2) .614 (15.6)
18 18/19 1.063 - 18 UNEF 1.52 (38.6) 1.41 (35.8) 1.50 (38.1) .325 (8.3) .634 (16.1)
20 20/21 1.188 - 18 UNEF 1.64 (41.7) 1.51 (38.4) 1.60 (40.6) .343 (8.7) .698 (17.7)
22 22/23 1.313 - 18 UNEF 1.77 (45.0) 1.66 (42.2) 1.70 (43.2) .381 (9.7) .823 (20.9)
24 24/25 1.438 - 18 UNEF 1.89 (48.0) 1.76 (44.7) 1.80 (45.7) .418 (10.6) .853 (21.7)
CONNECTOR DESIGNATOR:
FMIL-DTL-27599,
MIL-DTL-38999 Series Series I & II
Basic
Part Number
M85049/49-2 S 10 W
Dash No.
Material and Finish Designator
A = Aluminum, Black Anodize
N = Aluminum, Electroless Nickel
S = 300 Series Steel, Passivated
W = Aluminum, 1000 Hour Cadmium
Olive Drab over Electroless Nickel
APPLICATION NOTES
1. Assembly to be identied with manufacturer’s name and part number, space permitting.
2. Cable Entry is dened as the accommodation entry for the wire bundle or cable.
Dimensions are not intended for inspection criteria.
3. For complete dimensions, see the applicable Military Specication.
4. Metric dimensions (mm) are in parentheses.
S = Self-Locking
Use Dash for Non-Self-Locking
N = Non-Detented
FOR NEW DESIGN
USE AS85049/121