www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.030/05/14
General Purpose High Capacitance Multilayer SMD Ceramic Capacitor
0402 to 1812 Sizes, X7R, X5R, X6S & Y5V Dielectrics
Description:
MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT
and achieve miniaturization, high density and high efciency, ceramic condensers are used.
WTC high capacitance MLCC offers low ESR and excellent frequency characteristics to be
suited for coupling and decoupling applications in circuit. The high dielectric constant material
X7R, X5R and Y5V are used for this series product.
Features:
• Small size with high capacitance.
• Capacitor with lead-free termination (pure Tin).
Applications:
• Digital circuit coupling or decoupling applications.
• For high frequency and high-density type power suppliers.
• For bypassing.
How To Order:
MC 31 X 225 K 100 C T
Size Dielectric Capacitance Tolerance Rated Voltage Termination Packaging style
Multicomp
Inch (mm)
0402 (1005)
0603 (1608)
0805 (2012)
1206 (3216)
1210 (3225)
1812 (4532)
B=X7R
X=X5R
S=X6S
F=Y5V
Two signicant
digits followed by
no. of zeros. And
R is in place of
decimal point.
Eg.:
106 = 10×106
= 10μF
K=±10%
M=±20%
Z=-20/+80%
Two signicant
digits followed by
no. of zeros. And
R is in place of
decimal point.
6R3=6.3V DC
100=10V DC
160=16V DC
250=25V DC
500=50V DC
101=100V DC
C=Cu/Ni/Sn T=7” reeled
G=13” reeled
External Dimensions:
The outline of MLCC
Size
Inch (mm) L (mm) W (mm) T (mm)/Symbol Remark MB (mm)
0402 (1005) 1
±
0.05 0.5
±
0.05 0.5
±
0.05 N#0.25
+0.05/-0.1
1
±
0.2 0.5
±
0.2 0.5
±
0.2 E
0603 (1608)
1.6
±
0.1 0.8
±
0.1 0.8
±
0.07 S
0.4
±
0.15
1.6 +0.15/-
0.1
0.8 +0.15/-
0.1
0.8 +0.15/-
0.1 X
1.6
±
0.2*
1
0.8
±
0.2*
1
0.8
±
0.2*
1
0805 (2012) 2
±
0.15 1.25
±
0.1 0.8
±
0.1 B
0.5
±
0.21.25
±
0.1 D#
2
±
0.2 1.25
±
0.2 1.25
±
0.2 I#
www.element14.com
www.farnell.com
www.newark.com
Page <2> V1.030/05/14
General Purpose High Capacitance Multilayer SMD Ceramic Capacitor
0402 to 1812 Sizes, X7R, X5R, X6S & Y5V Dielectrics
General Electrical Data:
* Measured at 1±0.2Vrms, 1kHz±10% for C≤10µF; 0.5±0.2Vrms, 120Hz±20% for C>10µF, 30~70% related humidity, 25°C
ambient temperature for X7R, X5R and at 20°C for Y5V.
** Preconditioning for Class II MLCC: Perform a heat treatment at 150±10°C for 1 hour, then leave in ambient condition for
24±2 hours before measurement.
Size
Inch (mm) L (mm) W (mm) T (mm)/Symbol Remark MB (mm)
1206 (3216)
3.2
±
0.15 1.6
±
0.15
0.95
±
0.1 C#
0.6
±
0.2
1.25
±
0.1 D#
3.2
±
0.2 1.15
±
0.15 J#
1.6
±
0.2 1.6
±
0.20 G#
3.2+0.3/-0.1 1.6+0.3/-0.1 1.6+0.3/-0.1 P#
1210 (3225)
3.2
±
0.3 2.5
±
0.2 0.95
±
0.1 C#
0.75
±
0.25
1.25
±
0.1 D#
3.2
±
0.4 2.5
±
0.3
1.6
±
0.2 G#
2
±
0.2 K#
2.5
±
0.3 M#
1812 (4532)
4.5
±
0.4 3.2
±
0.3 1.25
±
0.1 D#
0.75
±
0.25
2
±
0.2 K#
4.5
±
0.4 3.2
±
0.4 2.5
±
0.3 M#
2.8
±
0.3 U#
# Reow soldering only is recommended.
*1 : For 0603/Cap^10μF products
Dielectric X7R X5R X6S Y5V
Size 0402, 0603, 0805, 1206, 1210, 1812
Capacitance range* 0.56µF to 47µF0.027µF to 100µF0.47µF to 100µF 1µF to 100µF
Capacitance tolerance** K (±10%), M (
±
20%) Z (-20/+80%)
Rated voltage (WVDC) 6.3V, 10V, 16V, 25V, 50V, 100V
DF(Tan
δ
)* Note 1
Operating temperature -55 to +125°C-55 to +85°C-55 to +105°C-25 to +85°C
Capacitance characteristic
±
15%
±
22% +30/-80%
Termination Ni/Sn (lead-free termination)
www.element14.com
www.farnell.com
www.newark.com
Page <3> V1.030/05/14
General Purpose High Capacitance Multilayer SMD Ceramic Capacitor
0402 to 1812 Sizes, X7R, X5R, X6S & Y5V Dielectrics
Note 1:
X7R/X5R/X6S
Rated Vol. D.F. ≦Exception of D.F.≦
≧100V ≦2.5% ≦3% 1206≧0.47µF
≦5% 0805＞0.1µF, 0603≧0.068µF
50V ≦2.5%
≦3% 0201(50V); 0603≧0.047µF; 0805≧0.18µF;1206≧0.47µF
≦5% 1210≧4.7µF
≦10% 0402≧0.1µF ;0603≧1µF;0805≧1µF;1206≧2.2µF;
1210≧10µF;TT series
35V ≦3.5% ≦10%
0603≧1µF;0805≥2.2µF;
1210≧10µF
25V ≦3.5%
≦5% 0201≧0.01µF;0805≧1µF; 1210≧10µF
≦7% 0603≧0.33µF; 1206≧4.7µF
≦10%
0402≧0.10µF;0603≧0.47µF;
0805≧2.2µF;
1206≧6.8µF ; 1210≧22µF ; TT series
≦12.5 %0402≧1µF
16V ≦3.5%
≦5%
0201≧0.01µF;0402≧0.033µF;
0603≧0.15µF; 0805≧0.68µ
1206≧2.2µF;1210≧4.7µF
≦10% 0201≧0.1µF;0402≧ 0.22uF; 0603≧0.68µF;0805≧2.2µF;
1206≧4.7µF; 1210≧22µF; TT series
10V ≦5% ≦10%
0201≧0.012µF;0402≧0.33µF;0603≧0.33µF;
0805≧2.2µF;
1206≧2.2µF;1210≧22µF;
TT series
≦15% 0201≧0.1µF; 0402≧1µF
6.3V ≦10% ≦15%
0201≧0.1µF;0402≧1µF;0603≧10µF;
0805≧4.7µF;
1206≧47µF :1210≧100µF; TT series
≦20% 0402≧2.2µF
4V ≦15% --- ---
Y5V
Rated vol. D.F.≦Exception of D.F.≦
≧50V 5% 7% 0603≧0.1µF; 0805≧0.47µF; 1206≧4.7µF
35V 7% --- ---
25V 5% 7% 0402≧0.047µF;0603≧0.1µF; 0805≧0.33µF;1206≧1µF;
1210≧4.7µF
9% 0402≧0.068µF;0603≧0.47µF; 1206≧4.7µF; 1210≧22µF
16V (C<1.0µF) 7% 9% 0402≧0.068µF; 0603≧0.68µF
12.5% 0402≧0.22µF
16V (C≧1.0µF) 9% 12.5% 0603≧2.2µF; 0805≧3.3µF; 1206≧10µF; 1210≧22µF;
1812≧47µF
10V 12.5% 20% 0402≧0.47µF
6.3V 20% --- ---
www.element14.com
www.farnell.com
www.newark.com
Page <4> V1.030/05/14
General Purpose High Capacitance Multilayer SMD Ceramic Capacitor
0402 to 1812 Sizes, X7R, X5R, X6S & Y5V Dielectrics
Packaging Dimension And Quantity:
Size Thickness (mm)/Symbol Paper tape Plastic tape
7” reel 13” reel 7” reel 13” reel
0402 (1005) 0.50±0.05 N 10k 50k - -
0.50±0.20 E 10k - - -
0603 (1608) 0.80±0.07 S 4k 15k - -
0.80±0.20 X 4k 15k - -
0805 (2012)
0.80±0.10 B 4k 15k - -
1.25±0.10 D - - 3k 10k
1.25±0.20 I - - 3k 10k
1206 (3216)
0.95±0.10 C - - 3k 10k
1.15±0.15 J - - 3k 10K
1.25±0.10 D - - 3k 10k
1.60±0.20 G - - 2k 10k
1.60+0.30/-0.10 P - - 2k 9k
1210 (3225)
0.95±0.10 C - - 3k 10k
1.25±0.10 D - - 3k 10k
1.60±0.20 G - - 2k -
2.00±0.20 K - - 1k 6k
2.50±0.30 M - - 1k 6k
1812 (4532)
1.25±0.10 D - - 1k 5k
2.00±0.20 K - - 1k -
2.50±0.30 M - - 0.5k 3k
2.80±0.30 U - - 0.5k -
Unit : pieces
No Item Test Condition Requirements
1Visual and
Mechanical -No remarkable defect.
Dimensions to conForm to individual specication sheet.
www.element14.com
www.farnell.com
www.newark.com
Page <5> V1.030/05/14
General Purpose High Capacitance Multilayer SMD Ceramic Capacitor
0402 to 1812 Sizes, X7R, X5R, X6S & Y5V Dielectrics
No Item Test Condition Requirements
2 Capacitance
Class I: NP0
Cap≤1000pF 1.0±0.2Vrms, 1MHz±10%
Cap>1000pF 1.0±0.2Vrms, 1KHz±10%
Class II: X7R, X5R, X6S,Y5V
Cap≤10μF, 1.0±0.2Vrms, 1kHz±10% **
Cap>10μF, 0.5±0.2Vrms, 120Hz±20%
** Test condition: 0.5±0.2Vrms,
1KHz±10%
X7R: 0603^225(10V),
0805=106(6.3V&10V)
X5R: 01R5^103, 0201^224
(6.3V,10V),
0402^475 (6.3V), 0402^225(10V),
0603=106 (6.3V,10V),
TT18X ^475(10V) , TT15X series
X6S:0201^224 (6.3V),0402^225
(6.3V),
*Shall not exceed the limits given in the detailed spec.
Q/ D.F.
(Dissipation
Factor)
NP0: Cap≥30pF, Q≥1000; Cap<30pF,Q≥400+20C
X7R,X5R,X6S:
Rated
vol. D.F.%Exception of D.F. %
^100V %2.5%
%3% 1206^0.47μF
%5% 0805>0.1μF, 0603^0.068μF
^50V %2.5%
%3% 0201(50V); 0603^0.047μF;
0805^0.18μF;1206^0.47μF
%5% 1210^4.7μF
%10%
0402^0.1μF; 0603^1μF;
0805^1μF;1206^4.7μF; 1210^10μF
TT series
35V %3.5% %10% 0603^1μF; 0805≥2.2μF; 1210^10μF
25V %3.5%
%5% 0201^0.01μF;0805^1μF; 1210^10μF
%7% 0603^0.33μF; 1206^4.7μF
%10% 0402^0.10μF;0603^0.47μF;0805^2.2
μF; 1206^6.8μF ; 1210^22μF; TT series
%12.5% 0402^1μF
16V %3.5%
%5% 0201^0.01μF; 0402^0.033μF;
0805^0.68μF;1206^2.2μF;1210^4.7μF
%10%
0201^0.1μF; 0402^0.47µF;
0603^0.68μF;0805^2.2μF; 1206^4.7μF;
1210^22μF; TT series
10V %5%
%10%
0201^0.012μF 0402^0.33μF;
0603^0.33μF; 0805^2.2μF; 1206^2.2μF;
1210^22μF; TT series
%15% 0201^0.1μF; 0402^1μF
6.3V %10%
%15%
0201^0.1μF;0402^1μF;0603^10μF;
0805^4.7μF; 1206^47μF :1210^100μF;
TT series
%20% 0402^2.2μF
4V %15% - -
Y5V:
Rated
vol. D.F.%Exception of D.F. %
^50V 5% 7% 0603^0.1μF; 0805^0.47μF; 1206^4.7μF
35V 7% - -
25V 5%
7% 0402^0.047μF;0603^0.1μF;
0805^0.33μF;1206^1μF; 1210^4.7μF
9% 0402^0.068μF; 0603^0.47μF;
1206^4.7μF; 1210^22μF
16V
(C<1μF) 7%
9% 0402^0.068μF; 0603^0.68μF
12.5% 0402^0.22μF
16V
(C^1.0μF) 9% 12.5% 0603^2.2μF; 0805^3.3μF; 1206^10μF;
1210^22μF; 1812^47μF
10V 12.5% 20% 0402^0.47μF
6.3V 20% - -
www.element14.com
www.farnell.com
www.newark.com
Page <6> V1.030/05/14
General Purpose High Capacitance Multilayer SMD Ceramic Capacitor
0402 to 1812 Sizes, X7R, X5R, X6S & Y5V Dielectrics
No Item Test Condition Requirements
4Dielectric
Strength
To apply voltage (≤100V) 250%.
Duration: 1 to 5 sec.
Charge and discharge current less than
50mA.
No evidence of damage or ash over during test.
5Insulation
Resistance
To apply rated voltage for max. 120
sec.
10GΩ or RxC^500Ω-F whichever is smaller.
Class II (X7R, X5R, X6S, Y5V)
Rated voltage Insulation
Resistance
100V: X7R
10G or
RxC^100ΩF
whichever is
smaller.
50V:0603≥1μF;0805≥1μF;1206≥4.7μF;
1210≥4.7μF
35V:0805≥2.2μF;1210^10μF
25V:0402≥1μF;0603≥2.2μF;0805≥2.2μF;
1206≥10μF;1210≥10μF
16V:0402≥0.22μF;0603≥1μF;0805≥2.2μF;
1206≥10μF;1210≥47μF
10V:0201≥47nF;0402≥0.47μF;0603≥0.47μF;
0805≥2.2μF; 1206≥4.7μF;1210≥47μF
6.3V ; 4V
50V: 0402≥0.1μF 10GΩ or
RxC^50 Ω-F
whichever is
smaller.
35V:0603≥1μF
10V:0603≥10μF
4V:0603≥22μF; 0805≥47μF
6Temperature
Coefcient
With no electrical load.
T.C. Operating Temp
NPO -55~125°C at 25°C
X7R -55~125°C at 25°C
X5R -55~ 85°C at 25°C
X6S -55~105°C at 25°C
Y5V -25~ 85°C at 20°C
T.C. Capacitance Change
NPO Within ±30ppm/°C
X7R Within ±15%
X5R Within ±15%
X6S Within ±22%
Y5V Within +30%/-80%
7
Adhesive
Strength of
Termination
Pressurizing force:
5N (≤0603) and 10N (>0603)
* Test time: 10±1 sec.
No remarkable damage or removal of the terminations.
8Vibration
Resistance
Vibration frequency: 10~55 Hz/min.
Total amplitude: 1.5mm
Test time: 6 hrs. (Two hrs each in three
mutually perpendicular directions.)
Measurement to be made after keeping
at room temp. for 24±2 hrs.
No remarkable damage.
Cap change and Q/D.F.: To meet initial spec.
www.element14.com
www.farnell.com
www.newark.com
Page <7> V1.030/05/14
General Purpose High Capacitance Multilayer SMD Ceramic Capacitor
0402 to 1812 Sizes, X7R, X5R, X6S & Y5V Dielectrics
No Item Test Condition Requirements
9 Solderability Solder temperature: 235±5°C
Dipping time: 2±0.5 sec. 95% min. coverage of all metalized area.
10. Bending Test
The middle part of substrate shall be
pressurized by means of the pressur-
izing rod at a rate of about 1 mm per
second until the deection becomes
1 mm and then the pressure shall be
maintained for 5±1 sec. Measurement
to be made after keeping at room temp.
for 24±2 hrs.
No remarkable damage.
Cap change:
NP0: within ±5% or 0.5pF whichever is larger
X7R, X5R, X6S: within ±12.5%
Y5V: within ±30%
(This capacitance change means the change of capacitance
under specied exure of substrate from the capacitance
measured before the test.)
11
Resistance
to Soldering
Heat
Solder temperature: 260±5°C
Dipping time: 10±1 sec
Preheating: 120 to 150°C for 1 min-
ute before immerse the capacitor in a
eutectic solder.
Before initial measurement (Class II
only): Perform 150+0/-10°C for 1 hr and
then set for 24±2 hrs at room temp.
Measurement to be made after keeping
at room temp. for 24±2 hrs.
No remarkable damage.
Cap change:
NP0: within ±2.5% or 0.25pF whichever is larger
X7R, X5R, X6S: within ±7.5%
Y5V: within ±20%
Q/D.F., I.R. and dielectric strength: To meet initial
requirements.
25% max. leaching on each edge.
12 Temperature
Cycle
Conduct the ve cycles according to
the temperatures and time.
Step Temp. (°C) Time
(min.)
1 Min. operating temp. +0/-3 30±3
2 Room temp. 2~3
3 Max. operating temp. +3/-0 30±3
4 Room temp. 2~3
Before initial measurement (Class II
only): Perform 150+0/-10°C for 1 hr and
then set for 24±2 hrs at room temp.
Measurement to be made after keeping
at room temp. for 24±2 hrs.
No remarkable damage.
Cap change:
NP0: within ±2.5% or 0.25pF whichever is larger
X7R, X5R, X6S: within ±7.5%
Y5V: within ±20%
Q/D.F., I.R. and dielectric strength: To meet initial
requirements.
www.element14.com
www.farnell.com
www.newark.com
Page <8> V1.030/05/14
General Purpose High Capacitance Multilayer SMD Ceramic Capacitor
0402 to 1812 Sizes, X7R, X5R, X6S & Y5V Dielectrics
No Item Test Condition Requirements
13
Humidity
(Damp Heat)
Steady State
Test temp.: 40±2°C
Humidity: 90~95% RH
Test time: 500+24/-0hrs.
Before initial measurement (Class II
only): Perform 150+0/-10°C for 1 hr and
then set for 24±2 hrs at room temp.
Measurement to be made after
keeping at room temp. for 24±2 hrs.
No remarkable damage.
Cap change:
NP0: within ±5% or 0.5pF whichever is larger
X7R, X5R, X6S: ≥10V**,within ±12.5%; %6.3V within ±25%;
TT series & C≥ 1uF,within ±25%
**10V: 0603^4.7μF;0402^1μF;0201^0.1μF, within ±25%;
Y5V: ≥10V, within ±30%; %6.3V, within +30/-40%
Q/D.F. value:
NP0: More than 30pF Q≥350, 10pF≤C≤30pF, Q≥275+2.5C
Less than 10pF Q≥200+10C
X7R, X5R, X6S:
Rated
vol. D.F.%Exception of D.F. %
^100V %3%
%6% 1206^0.47μF
%7.5% 0805>0.1μF, 0603^0.068μF
^50V %3%
%6% 0201(50V); 0603^0.047μF;
0805^0.18μF;1206^0.47μF
%10% 1210^4.7μF
%20%
0402^0.1μF; 0603^1μF;
0805^1μF;1206^4.7μF; 1210^10μF
TT series
35V %5% %20% 0603^1μF; 0805≥2.2μF; 1210^10μF
25V %5%
%10% 0201^0.01μF;0805^1μF; 1210^10μF
%14% 0603^0.33μF; 1206^4.7μF
%15% 0402^0.10μF;0603^0.47μF;0805^2.2
μF; 1206^6.8μF ; 1210^22μF; TT series
%20% 0402^1μF
16V %5%
%10% 0201^0.01μF; 0402^0.033μF;
0805^0.68μF;1206^2.2μF;1210^4.7μF
%15%
0201^0.1μF; 0402^0.47µF;
0603^0.68μF;0805^2.2μF; 1206^4.7μF;
1210^22μF; TT series
10V %7.5%
%15%
0201^0.012μF 0402^0.33μF;
0603^0.33μF; 0805^2.2μF; 1206^2.2μF;
1210^22μF
%20% 0201^0.1μF; 0402^1μF TT series
6.3V %15% %30%
0201^0.1μF;0402^1μF;0603^10μF;
0805^4.7μF; 1206^47μF :1210^100μF;
TT series
4V %20% - -
www.element14.com
www.farnell.com
www.newark.com
Page <9> V1.030/05/14
General Purpose High Capacitance Multilayer SMD Ceramic Capacitor
0402 to 1812 Sizes, X7R, X5R, X6S & Y5V Dielectrics
No Item Test Condition Requirements
13
Y5V:
Rated
vol. D.F.%Exception of D.F. %
^50V 7.5% 10% 0603^0.1μF; 0805^0.47μF; 1206^4.7μF
35V 10% - -
25V 7.5%
10% 0402^0.047μF;0603^0.1μF;
0805^0.33μF;1206^1μF; 1210^4.7μF
15% 0402^0.068μF; 0603^0.47μF;
1206^4.7μF; 1210^22μF
16V
(C<1μF) 10%
12.5% 0402^0.068μF; 0603^0.68μF
20% 0402^0.22μF
16V
(C^1.0μF) 12.5% 20% 0603^2.2μF; 0805^3.3μF; 1206^10μF;
1210^22μF; 1812^47μF
10V 20% 30% 0402^0.47μF
6.3V 30% - -
*I.R.: ≥10V, 1GΩ or 50 Ω-F whichever is smaller.
Class II (X7R, X5R, X6S, Y5V)
Rated voltage Insulation
Resistance
100V: X7R
1GΩ or
RxC^10 Ω-F
whichever is
smaller.
50V: 0402≥0.1μF;0603≥1μF;0805≥1μF;
1206≥4.7μF;1210≥4.7μF
35V: 0603≥1μF; 0805≥2.2μF;1210^10μF
25V:0402≥1μF;0603≥2.2μF;0805≥2.2μF;
1206≥10μF;1210≥10μF
16V:0402≥0.22μF;0603≥1μF;0805≥2.2μF;
1206≥10μF;1210≥47μF
10V:0201≥47nF;0402≥0.47μF;0603≥0.47
μF;0805≥2.2μF;
1206≥4.7μF;1210≥47μF
6.3V ; 4V
14
Humidity
(Damp Heat)
Load
Test temp.: 40±2°C
Humidity: 90~95%RH
Test time: 500+24/-0 hrs.
To apply voltage : rated voltage.
Before initial measurement (Class II
only): To apply test voltage for 1hr at
40°C and then set for 24±2 hrs at room
temp.
Measurement to be made after
keeping at room temp. for 24±2 hrs.
No remarkable damage.
Cap change:
NP0: ±7.5% or 0.75pF whichever is larger.
X7R, X5R, X6S: ≥10V**,within ±12.5%; %6.3V within ±25%;
TT series & C≥ 1uF,within ±25%
**10V: 0603^4.7μF;0402^1μF;0201^0.1μF, within ±25%;
Y5V: ≥10V, within ±30%; %6.3V, within +30/-40%
Q/D.F. value:
NP0: C≥30pF,Q≥200;C<30pF, Q≥100+10/3C
www.element14.com
www.farnell.com
www.newark.com
Page <10> V1.030/05/14
General Purpose High Capacitance Multilayer SMD Ceramic Capacitor
0402 to 1812 Sizes, X7R, X5R, X6S & Y5V Dielectrics
No Item Test Condition Requirements
14
Humidity
(Damp Heat)
Load
X7R, X5R, X6S:
Rated
vol. D.F.%Exception of D.F. %
^100V %3%
%6% 1206^0.47μF
%7.5% 0805>0.1μF, 0603^0.068μF
^50V %3%
%6% 0201(50V); 0603^0.047μF;
0805^0.18μF;1206^0.47μF
%10% 1210^4.7μF
%20%
0402^0.1μF; 0603^1μF;
0805^1μF;1206^4.7μF; 1210^10μF
TT series
35V %5% %20% 0603^1μF; 0805≥2.2μF; 1210^10μF
25V %5%
%10% 0201^0.01μF;0805^1μF; 1210^10μF
%14% 0603^0.33μF; 1206^4.7μF
%15% 0402^0.10μF;0603^0.47μF;0805^2.2
μF; 1206^6.8μF ; 1210^22μF; TT series
%20% 0402^1μF
16V %5%
%10% 0201^0.01μF; 0402^0.033μF;
0805^0.68μF;1206^2.2μF;1210^4.7μF
%15%
0201^0.1μF; 0402^0.47µF;
0603^0.68μF;0805^2.2μF; 1206^4.7μF;
1210^22μF; TT series
10V %7.5%
%15%
0201^0.012μF 0402^0.33μF;
0603^0.33μF; 0805^2.2μF; 1206^2.2μF;
1210^22μF; TT series
%20% 0201^0.1μF; 0402^1μF
6.3V %15% %30%
0201^0.1μF;0402^1μF;0603^10μF;
0805^4.7μF; 1206^47μF :1210^100μF;
TT series
4V %20% - -
Y5V:
Rated
vol. D.F.%Exception of D.F. %
^50V 7.5% 10% 0603^0.1μF; 0805^0.47μF; 1206^4.7μF
35V 10% - -
25V 7.5%
10% 0402^0.047μF;0603^0.1μF;
0805^0.33μF;1206^1μF; 1210^4.7μF
15% 0402^0.068μF; 0603^0.47μF;
1206^4.7μF; 1210^22μF
16V
(C<1μF) 10%
12.5% 0402^0.068μF; 0603^0.68μF
20% 0402^0.22μF
16V
(C^1.0μF) 12.5% 20% 0603^2.2μF; 0805^3.3μF; 1206^10μF;
1210^22μF; 1812^47μF
10V 20% 30% 0402^0.47μF
6.3V 30% - -
www.element14.com
www.farnell.com
www.newark.com
Page <11> V1.030/05/14
General Purpose High Capacitance Multilayer SMD Ceramic Capacitor
0402 to 1812 Sizes, X7R, X5R, X6S & Y5V Dielectrics
No Item Test Condition Requirements
14
Humidity
(Damp Heat)
Load
*I.R.: ≥10V, 500MΩ or 25 Ω-F whichever is smaller.
Class II (X7R, X5R, X6S, Y5V)
Rated voltage Insulation
Resistance
100V: X7R
500GΩ or
RxC^5 Ω-F
whichever is
smaller.
50V: 0402≥0.1μF;0603≥1μF;0805≥1μF;
1206≥4.7μF;1210≥4.7μF
35V: 0603≥1μF; 0805≥2.2μF;1210^10μF
25V:0402≥1μF;0603≥2.2μF;0805≥2.2μF;
1206≥10μF;1210≥10μF
16V:0402≥0.22μF;0603≥1μF;0805≥2.2μF;
1206≥10μF;1210≥47μF
10V:0201≥47nF;0402≥0.47μF;0603≥0.47
μF;0805≥2.2μF;
1206≥4.7μF;1210≥47μF
6.3V ; 4V
15.
High
Temperature
Load
(Endurance)
*Test temp.:
NP0, X7R/X7E: 125±3°C
X6S: 105±3°C
X5R, Y5V: 85±3°C
*Test time: 1000+24/-0 hrs.
*To apply voltage:
1) %% of rated voltage.
2) 10V%Ur<500V:
200% of rated voltage.
3) 500V: 150% of rated voltage.
4) Ur^630V:
120% of rated voltage.
No remarkable damage.
Cap change:
NP0: ±3.0% or ±0.3pF whichever is larger
X7R, X5R, X6S: ≥10V**,within ±12.5%; %6.3V within ±25%;
TT series & C≥ 1uF,within ±25%
**10V: 0603^4.7μF;0402^1μF;0201^0.1μF, within ±25%;
Y5V: ≥10V, within ±30%; %6.3V, within +30/-40%
Q/D.F. value:
NP0: More than 30pF, Q≥350
10pF≤C<30pF, Q≥275+2.5C
Less than 10pF, Q≥200+10C
www.element14.com
www.farnell.com
www.newark.com
Page <12> V1.030/05/14
General Purpose High Capacitance Multilayer SMD Ceramic Capacitor
0402 to 1812 Sizes, X7R, X5R, X6S & Y5V Dielectrics
No Item Test Condition Requirements
15
High
Temperature
Load
(Endurance)
5) 100% of rated voltage for below
range.
Size Dielectric Rated
voltage
Capaci-
tance
range
0201 X5R/X7R/
X6S 6.3V,10V C^0.1μF
0402 X5R/X7R/
X6S 6.3V,10V C^1.0μF
0603 X5R/X7R/
X6S
4V C^22μF
6.3V,10V C^4.7μF
35V C^1.0μF
0805 X5R/X7R/
X6S
4V C^47μF
6.3V C^22μF
1206 X5R/X7R/ 6.3V C^47μF
NP0 3,000V C^1.5pF
TT18 Y5V 6.3V,10 C^2.2μF
TT21 Y5V 6.3V C^10μF
TT31 Y5V 6.3V C^22μF
(6) 150% of rated voltage for below
range.
Size Dielectric Rated
voltage
Capaci-
tance
range
0201 X5R/X7R/
X6S 16V C^0.1μF
0402
X5R/X7R/
X6S
50V C^0.1μF
10V~25V C^0.22μF
Y5V 16V C^0.47μF
0603
X5R/X7R/
X6S 10V,50V C^1.0μF
Y5V 16V C^2.2μF
0805
X5R/X7R/
X6S 10~50V C^4.7μF
X7R 50V C^2.2μF
100V C^0.47μF
Y5V 16V C^4.7μF
2220 X7R 100V C^6.8μF
X7R, X5R, X6S:
Rated
vol. D.F.%Exception of D.F. %
^100V %3%
%6% 1206^0.47μF
%7.5% 0805>0.1μF, 0603^0.068μF
^50V %3%
%6% 0201(50V); 0603^0.047μF;
0805^0.18μF;1206^0.47μF
%10% 1210^4.7μF
%20%
0402^0.1μF; 0603^1μF;
0805^1μF;1206^4.7μF; 1210^10μF
TT series
35V %5% %20% 0603^1μF; 0805≥2.2μF; 1210^10μF
25V %5%
%10% 0201^0.01μF;0805^1μF; 1210^10μF
%14% 0603^0.33μF; 1206^4.7μF
%15% 0402^0.10μF;0603^0.47μF;0805^2.2
μF; 1206^6.8μF ; 1210^22μF; TT series
%20% 0402^1μF
16V %5%
%10% 0201^0.01μF; 0402^0.033μF;
0805^0.68μF;1206^2.2μF;1210^4.7μF
%15%
0201^0.1μF; 0402^0.47µF;
0603^0.68μF;0805^2.2μF; 1206^4.7μF;
1210^22μF; TT series
10V %7.5%
%15%
0201^0.012μF 0402^0.33μF;
0603^0.33μF; 0805^2.2μF; 1206^2.2μF;
1210^22μF; TT series
%20% 0201^0.1μF; 0402^1μF
6.3V %15% %30%
0201^0.1μF;0402^1μF;0603^10μF;
0805^4.7μF; 1206^47μF :1210^100μF;
TT series
4V %20% - -
Y5V:
Rated
vol. D.F.%Exception of D.F. %
^50V 7.5% 10% 0603^0.1μF; 0805^0.47μF; 1206^4.7μF
35V 10% - -
25V 7.5%
10% 0402^0.047μF;0603^0.1μF;
0805^0.33μF;1206^1μF; 1210^4.7μF
15% 0402^0.068μF; 0603^0.47μF;
1206^4.7μF; 1210^22μF
16V
(C<1μF) 10%
12.5% 0402^0.068μF; 0603^0.68μF
20% 0402^0.22μF
16V
(C^1.0μF) 12.5% 20% 0603^2.2μF; 0805^3.3μF; 1206^10μF;
1210^22μF; 1812^47μF
10V 20% 30% 0402^0.47μF
6.3V 30% - -
www.element14.com
www.farnell.com
www.newark.com
Page <13> V1.030/05/14
General Purpose High Capacitance Multilayer SMD Ceramic Capacitor
0402 to 1812 Sizes, X7R, X5R, X6S & Y5V Dielectrics
No Item Test Condition Requirements
15
High
Temperature
Load
(Endurance
*Before initial measurement
(Class II only): To apply test
voltage for 1hr at test temp. and
then set for 24±2 hrs at room
temp.
*Measurement to be made after
keeping at room temp. for 24±2
hrs
*I.R.: ≥10V, 1GΩ or 50 Ω-F whichever is smaller.
Class II (X7R, X5R, X6S, Y5V)
Rated voltage Insulation
Resistance
100V: X7R
1GΩ or
RxC^10 Ω-F
whichever is
smaller.
50V: 0402≥0.1μF;0603≥1μF;0805≥1μF;
1206≥4.7μF;1210≥4.7μF
35V: 0603≥1μF; 0805≥2.2μF;1210^10μF
25V:0402≥1μF;0603≥2.2μF;0805≥2.2μF;
1206≥10μF;1210≥10μF
16V:0402≥0.22μF;0603≥1μF;0805≥2.2μF;
1206≥10μF;1210≥47μF
10V:0201≥47nF;0402≥0.47μF;0603≥0.47
μF;0805≥2.2μF;
1206≥4.7μF;1210≥47μF
6.3V ; 4V
Appendixes
Tape & Reel Dimensions
The dimension of paper tape The dimension of plastic tape
Size 0402 0603 0805 1206 1210 1812
Thick-
ness N
E
S, X
A B
C, D, I BC, J, D G,P C, D G, K MD, K M
U
A
0
0.62±0.05 0.7±0.10 1.02±0.05 1.5±0.1 1.5±0.1 <1.57 2±0.1 <1.85 <1.95 <2.97 <2.97 <2.97 <3.81 <3.81 <3.9
B
0
1.12±0.05 1.2±0.10 1.8±0.05 2.3±0.1 2.3±0.1 <2.40 3.5±0.1 <3.46 <3.67 <3.73 <3.73 <3.73 <5.3 <5.3 <5.3
T0.6±0.05 0.7±0.10 0.95±0.05 0.75±0.05 0.95±0.05 0.23±0.05 0.95±0.05 0.23±0.05 0.23±0.05 0.23±0.05 0.23±0.05 0.23±0.05 0.25±0.05 0.25±0.05 0.25±0.05
K
0
- - -
- -
<2.5 - <2.5 <2.5 <2.5 <2.5 <3 <2.5 <3 <3.5
W8±0.1 8±0.10 8±0.1 8±0.1 8±0.1 8±0.1 8±0.1 8±0.1 8±0.1 8±0.1 8±0.1 8±0.1 12±0.2 12±0.2 12±0.2
P
0
4±0.1 4±0.10 4±0.1 4±0.1 4±0.1 4±0.1 4±0.1 4±0.1 4±0.1 4±0.1 4±0.1 4±0.1 4±0.1 4±0.1 4±0.1
10xP040±0.1 40±0.1 40±0.1 40±0.1 40±0.1 40±0.1 40±0.1 40±0.1 40±0.1 40±0.1 40±0.1 40±0.1 40±0.1 40±0.1 40±0.2
P
1
2±0.05 2±0.05 4±0.1 4±0.1 4±0.1 4±0.1 4±0.1 4±0.1 4±0.1 4±0.1 4±0.10 4±0.1 8±0.1 8±0.1 8±0.1
P
2
2±0.05 2±0.05 2±0.05 2±0.05 2±0.05 2±0.05 2±0.05 2±0.05 2±0.05 2±0.05 2±0.05 2±0.05 2±0.05 2±0.05 2±0.05
D
0
1.55±0.05 1.55±0.05 1.55±0.05 1.55±0.05 1.55±0.05 1.5±0.05 1.5±0.05 1.5±0.05 1.5±0.05 1.5±0.05 1.5±0.05 1.5±0.05 1.5±0.05 1.5±0.05 1.5±0.1
D
1
- - -
- -
1±0.1 - 1±0.1 1±0.1 1±0.1 1±0.1 1±0.1 1.5±0.1 1.5±0.1 1.5±0.1
E1.75±0.05 1.75±0.05 1.75±0.05 1.75±0.05 1.75±0.05 1.75±0.1 1.75±0.1 1.75±0.1 1.75±0.1 1.75±0.1 1.75±0.1 1.75±0.1 1.75±0.1 1.75±0.1 1.75±0.1
F3.5±0.05 3.5±0.05 3.5±0.05 3.5±0.05 3.5±0.05 3.5±0.05 3.5±0.05 3.5±0.05 3.5±0.05 3.5±0.05 3.5±0.05 3.5±0.05 5.5±0.05 5.5±0.05 5.5±0.05
www.element14.com
www.farnell.com
www.newark.com
Page <14> V1.030/05/14
General Purpose High Capacitance Multilayer SMD Ceramic Capacitor
0402 to 1812 Sizes, X7R, X5R, X6S & Y5V Dielectrics
The dimension of reel
S
i
z
e
0402, 0603, 0805, 1206, 1210
1812
Reel
s
i
z
e
7” 10” 13” 7”
C13 +0.5/-0.2 13 +0.5/-0.2 13 +0.5/-0.2 13 +0.5/-0.2
W
1
8.4 +1.5/-0 8.4+1.5/-0 8.4 +1.5/-0 12.4+2.0/-0
A178
±
0.1 250
±
1330
±
1178
±
0.1
N60 +1/-0 100
±
1100
±
160 +1/-0
Constructions:
No. Name NP0* NPO, X7R, Y5V
1 Ceramic material BaTiO3 based
2 Inner electrode Ni
3
Termination
Inner layer Cu
4 Middle layer Ni
5 Outer layer Sn (Matt)
Storage and handling conditions
(1) To store products at 5°C to 40°C ambient temperature and 20 to 70%. related humidity conditions.
(2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life
extension is needed.
Cautions:
a. The corrosive gas reacts on the terminal electrodes of capacitors, and results in the poor solderability.
Do not store the capacitors in the ambience of corrosive gas (e.g., hydrogen sulde, sulfur dioxide,
chlorine, ammonia gas etc.)
b. In corrosive atmosphere, solderability might be degraded, and silver migration might occur to cause low reliability.
c. Due to the dewing by rapid humidity change, or the photochemical change of the terminal electrode by
direct sunlight,the solderability and electrical performance may deteriorate. Do not store capacitors under
direct sunlight or dewing condition. To store products on the shelf and avoid exposure to moisture.
www.element14.com
www.farnell.com
www.newark.com
Page <15> V1.030/05/14
General Purpose High Capacitance Multilayer SMD Ceramic Capacitor
0402 to 1812 Sizes, X7R, X5R, X6S & Y5V Dielectrics
Recommended Soldering Conditions:
The lead-free termination MLCCs are not only to be used on SMT against lead-free solder paste, but also suitable against
lead-containing solder paste. If the optimized solder joint is requested, increasing soldering time, temperature and concentration
of N2 within oven are recommended.
Recommended reow soldering prole for SMT
process with SnAgCu series solder paste.
Recommended wave soldering prole for SMT
process with SnAgCu series solder.
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
