C-1xx-2500-FDFB-SLC2
OC-48 Small Form Pluggable CWDM Transceiver
Features
• CWDM DFB Laser
• SFP MSA compliant
• Data rate 2.488 Gbps
• Single +3.3 V Power Supply
• Low power consumption
• Available with LC duplex connector
• LVPECL Differential Inputs and Outputs
• Class 1 Laser Int. Safety Standard IEC 825 Compliant
• Uncooled laser diode with MQW structure
• Complies with CORE GR-253
Absolute Maximum Ratings
Symbol
Vcc
-
Iout
Topr
Tstg
Unit
V
V
mA
°C/s
ºC
°C
°C /s
Min
-
GND
0
-
0
-40
-
Max
3.6
Vcc
30
260/6
70
85
300/10
Parameter
Power Supply Voltage
Input Voltage
Output Current
Soldering Temperature
Operating Temperature
Storage Temperature
Grounding Post Temp/Time
Recommended Operating Conditions
Symbol
Vcc
Topr
Max
3.5
70
-
Unit
V
°C
Gbps
Min
3.1
0
-
Typ
3.3
-
2.488
Parameter
Power Supply Voltage
Operating Temperature(case)
Data Rate
Symbol Min Typ Max
Max
Unit Notes
Transmitter Specifications (0°C<T
op
<70°C,3.1V<V
cc
<3.5V)
Parameter
Optical
Symbol Min Typ Unit Notes
Center Wavelength
Parameter
Electrical
Part no.
Identif.-xx
Part no.
Identif.-xx
Part no.
Identif.-xx
Part no.
Identif.-xx
λcλcλcλc
Unit Unit Unit Unit
31
33
35
37
1311
1331
1351
1371
nm
nm
nm
nm
39
41
43
45
1391
1411
1431
1451
nm
nm
nm
nm
47
49
51
53
1471
1491
1511
1531
nm
nm
nm
nm
55
57
59
61
1551
1571
1591
1611
nm
nm
nm
nm
Extinction Ratio
Output Eye
Optical Rise Time
Optical Rise Time
Total Jitter
Compliant with Bellcore TR-NWT-000253 and ITU recommendation G.957
t
r
t
f
TJ
0.2
0.2
1.2
ns
ns
ns
Max
Power Supply Current
Data Input Voltage-Low
Data Input Voltage-High
TX_DISABLE Input Voltage-Low
TX_DISABLE Input Voltage -High
TX_FAULT Output Voltage -Low
TX_FAULT Output Voltage - High
V
IL
-V
CC
V
IH
-V
CC
V
IL
V
IH
V
TOL
V
TOH
-
-1.98
-1.1
0
2
V
cc
-0.5
0
-1.71
-0.91
0.8
3.45
V
cc
+0.3
0.5
I
cc
150
V
V
V
V
V
V
mA
E
R
8.2
-
-
-
-
-
-
-
- dB
10%-90% Values
10%-90% Values
Measured with 2
23
-1 PRBS with 72 ones
and 72 zeros.
Maximum current is specified at V
cc
=Maximum
@maximum temperature.
These inputs are compatible with 10K, 10KH and 100K
ECL and LVPECL inputs.
Transmit Power-
λλ
Output Center Wavelength
Output Spectrum Width
Po
λ
∆λ20
-5
λc - 6.5
-
-
λc
-
0
λc +6.5
1
dBm
nm
nm
Output power is coupled into a 9/125µm single mode fiber
0 to +70˚C
-20 dB
-
-
-
-
-
-
-
C-1xx-2500-FDFB-SLC2
OC-48 Small Form Pluggable CWDM Transceiver
TX GND
Open Collector
Internally Pulled High
Serial Clock Input
Serial Data Input
Internally Grounded
Not Connected
Open Collector
RX Ground
RX Ground
RX Ground
RX Data Negative
RX Data Positive
RX GND
RX Power
TX Power
TX GND
TX Data Positive
TX Data Negative
TX GND
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
VeeT
TX_FAULT
TX_DISABLE
MOD_DEF2
MOD_DEF1
MOD_DEF0
NC
LOS
VeeR
VeeR
VeeR
RXD-
RXD+
VeeR
VccR
VccT
VeeT
TXD+
TXD-
VeeT
Function Notes Package Diagram
Pinout Definitions
Bringing Communications to Light
Luminent
Symbol Min Typ Max Unit Notes
Receiver Specifications (0°C < Top < 70°C, 3.1 V < Vcc < 3.5 V)
Parameter
Optical
Sensitivity
.39
.45
2.25
.34
.52
2.22
.15
.123
.246
.52
Maximum Input Power
RX_LOS - Asserted
RX_LOS - Deasserted
RX_LOS - Hysteresis
Wavelength of Operation
Pin
Pa
Pd
-
-
-28
1
1200
-20
-3
-20
-
-
1620
-
dBm
dBm
dBm
dB
nm
dBm Measured with 223-1 PRBS with 72 ones and
72 zeros. (ITU-T recommendation G.958)
Measured on transition: low to high
Measured on transition: high to low
Electrical
Power Supply Current
Data output Voltage - Low
Data output Voltage - High
RX_LOS Output Voltage-Low
RX-LOS Output Voltage - High
Icc
VOL-VCC
VOH-VCC
Vroh
Vrol
-1.98
-1.1
Vcc-0.5
0
100
-1.71
-0.91
Vcc+0.3
0.5
mA
V
V
V
V
The current excludes the output load current
These outputs are compatible with 10K,
10KH and 100K ECL and LVPECL outputs.
-
-
-
-
-
-
-
-
-
-
-
C-1xx-2500-FDFB-SLC2
OC-48 Small Form Pluggable CWDM Transceiver
LUMNDS127-0302
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 • LUMINENTINC.COM
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines
according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.
IMPORTANT NOTICE!
All information contained in this document is subject to change without notice, at Luminent’s sole and absolute discretion. Luminent warrants performance of its products to
current specifications only in accordance with the company’s standard one-year warranty; however, specifications designated as “preliminary” are given to describe components
only, and Luminent expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a
particular purpose, and non-infringement of proprietary rights. Please refer to the company’s Terms and Conditions of Sale for further warranty information.
Luminent assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described
herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and Luminent makes no representations or warranties
that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in
implantation or other life support applications where malfunction may result in injury or death to persons. Luminent customers using or selling products for use in such
applications do so at their own risk and agree to fully defend and indemnify Luminent for any damages resulting from such use or sale.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that Luminent is not liable for any actual,
consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact Luminent to
obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current.
© Luminent, Inc. 2002
All rights reserved
Warnings
Legal Notice
Suggested Transceiver Interface
SerDes
100 Ω
Receiver Amplifier
RD +
RD -
.01µF
.01µF
MOD_DEF 2
MOD_DEF 1
MOD_DEF 0
VCC
R1R1R1
R1= 4.7Κ to 10ΚΩ
EEPROM
RX_LOS
R1
Laser Driver
.01µF
.01µF
100 Ω
TD +
TD -
TX_FAULT
TX_DISABLE
Protocol IC R1
R1
VEET
R1
.01µF
0.1µF10 µF
1µH
VCC
Luminent
C-13-2488-SFP
VEER
0.1µF
10µF
1µH
VCCR
TX_DISABLE
TX_FAULT
RX_LOS
VCCT
C-1xx-2500-FDFB-SLC2
D for DFB
Laser Type
LC duplex connector
Ordering information
See table under wavelength
specifications
Data Rate
Wavelength